Recomendações para calibração em química analítica: parte I. Fundamentos e calibração com um componente (calibração univariada)

This paper is a translation from IUPAC nomenclature document by K. Danzer and L. A. Currie (Pure Appl. Chem., 1998, 70(4), 993-1014). Its goal is to establish an uniform and meaningful approach to terminology (in Portuguese), notation, and formulation for calibation in analytical chemistry. In this first part, general fundamentals of calibration are presented, namely for both relationships of qualitative and quantitative variables (relations between variables characterizing certain types analytes of the measured function on the other hand and between variables characterizing the amount or concentration of the chemical species and the intensities of the measured signals, on the other hand). On this basis, the fundamentals of the common single component calibration (Univariate Calibration) which models the relationship y = f(x) between the signal intensities y and the amounts or concentrations x of the analyte under given conditions are represented. Additional papers will be prepared dealing with extensive relationships between several intensities and analyte contents, namely with multivariate calibrations and with optimization and experimental design.

Fuzzy subgroups, algebraic and topological points of view and complex analysis

Fuzzy subsets and fuzzy subgroups are basic concepts in fuzzy mathematics. We shall concentrate on fuzzy subgroups dealing with some of their algebraic, topological and complex analytical properties. Explorations are theoretical belonging to pure mathematics. One of our ideas is to show how widely fuzzy subgroups can be used in mathematics, which brings out the wealth of this concept. In complex analysis we focus on Möbius transformations, combining them with fuzzy subgroups in the algebraic and topological sense. We also survey MV spaces with or without a link to fuzzy subgroups. Spectral space is known in MV algebra. We are interested in its topological properties in MV-semilinear space. Later on, we shall study MV algebras in connection with Riemann surfaces. In fact, the Riemann surface as a concept belongs to complex analysis. On the other hand, Möbius transformations form a part of the theory of Riemann surfaces. In general, this work gives a good understanding how it is possible to fit together different fields of mathematics.

Projeccions de canvi climatic per a Catalunya (NE Península Ibèrica). Part II: sintetitzant diverses metodologies = Climate change projections for Catalonia (NE Iberian Peninsula). Part II: Integrating several methodologies

The publication of the fourth IPCC report, as well as the number of research results reported in recent years about the regionalization of climate projections, were the driving forces to justify the update of the report on climate change in Catalonia. Specifically, the new IPCC report contains new climate projections at global and continental scales, while several international projects (especially European projects PRUDENCE and ENSEMBLES) have produced continental-scale climate projections, which allow for distinguishing between European regions. For Spain, some of these results have been included in a document commissioned by the“State Agency of Meteorology”. In addition, initiatives are being developed within Catalonia (in particular, by the Meteorological Service of Catalonia) to downscale climate projections in this area. The present paper synthesizes results of these and other previously published studies, as well as our own analysis of results of the ENSEMBLES project. The aim is to propose scenarios of variation in temperature and rainfall in Catalonia during the 21st Century. Thus, by the middle of this century temperatures could rise up to 2 C compared with that of the late 20th Century. These increases would probably be higher in summer than in winter, generalized across the territory but less pronounced in coastal areas. Rainfall, however, would not change much, but it could slightly decrease. Towards the end of the 21st Century, temperatures could rise to about 5 C above that of the last century, while the average rainfall could decrease by more than 10%. Increases in temperature would be higher in summer and in areas further from the coast. Rainfall would decrease especially during the summer, while it could even increase in winter in mountainous areas such as the Pyrenees.

Modelo de comportamiento en sevicio para estructuras reticulares de hormigón. Parte II: Diagrama tensión- deformación para elementos fisurados a flexión

This paper presents a general methodology to adjust the coefficients defining a constitutive law for tensioned concrete to simulate, under serviceability conditions, the behaviour of cracked concrete members subjected to simple and combined bending (with axial compressive forces). Although experimental results could be used to obtain the mentioned objective, in this work the models proposed by the CEB are utilized, in order to obtain more general conclusions not subjected to specific experiments. A numerical parametrical analysis is performed to determine the more significant variables influencing the Tension-Stiffening effect and simplified closed-form solution is derived for rectangular sections. A systematic study has been to verify the ability of the method to simulate long-term effects. The methodology can be implemented as an initial process in a general model of analysis like the one presented in Part I

TransPromo communication as a part of company’s marketing communications when the e-bill is a medium

The goal of this thesis was to research what TransPromo is, why companies want to implement TransPromo communication, and what the elements of effective Transpromo communication are. Furthermore, the goal was to develop a TransPromo communication strategy and a normative model for TeliaSonera Finland, which depicts the elements of effective TransPromo communication when the electronic bill is a medium. Abductive reasoning was utilized in this thesis, which means that empirical and theoretical worlds are alternating in researcher’s reasoning process. This thesis didn’t rely on any specific theory nor did it utilize any previous theoretical model. However, certain theoretical connections existed so this thesis cannot be considered purely inductive. The empirical part of this thesis was conducted by examining secondary industry data and by conducting specialist interviews at TeliaSonera Finland and Strålfors. Grounded Theory approach was utilized in the analysis of the interview data and content analysis was used in the analysis of secondary industry data. This thesis increases knowledge in the area of TransPromo communication, and provides one definition of TransPromo communication. As a result of this thesis, a TransPromo communication strategy and a normative model for TeliaSonera Finland was built. The model depicts the elements of the effective TransPromo communication when the e-bill is a medium. The TranPromo communication objective is to utilize transaction documents, such as bills, in order to deliver targeted and personalized marketing messages to current customers. The aim is to strengthen the customer relationship, and to enforce up-sell and cross-sell opportunities and cost savings.

Physicochemical composition of pure and adulterated royal jelly

The physicochemical composition of pure royal jelly as well as of some adulterated samples was analyzed by determining moisture, ash, lipids, nitrogen/proteins, carbohydrates, starch and 10- HDA (10-hydroxy-2-decenoic acid). The solubility in alkaline medium was used to detect the main frauds for adulterating royal jelly which comprise addition of yogurt, water, egg white, sweet condensed milk mixed with propolis, unripe banana and corn starch slurry.

Calculation of the critical crack size for cold form rectangular hollow section tube (CRHS) under bending load at -40º C temperature

To predict the capacity of the structure or the point which is followed by instability, calculation of the critical crack size is important. Structures usually contain several cracks but not necessarily all of these cracks lead to failure or reach the critical size. So, defining the harmful cracks or the crack size which is the most leading one to failure provides criteria for structure’s capacity at elevated temperature. The scope of this thesis was to calculate fracture parameters like stress intensity factor, the J integral and plastic and ultimate capacity of the structure to estimate critical crack size for this specific structure. Several three dimensional (3D) simulations using finite element method by Ansys program and boundary element method by Frank 3D program were carried out to calculate fracture parameters and results with the aid of laboratory tests (loaddisplacement curve, the J resistance curve and yield or ultimate stress) leaded to extract critical size of the crack. Two types of the fracture which is usually affected by temperature, Elastic and Elasti-Plastic fractures were simulated by performing several linear elastic and nonlinear elastic analyses. Geometry details of the weldment; flank angle and toe radius were also studied independently to estimate the location of crack initiation and simulate stress field in early stages of crack extension in structure. In this work also overview of the structure’s capacity in room temperature (20 ºC) was studied. Comparison of the results in different temperature (20 ºC and -40 ºC) provides a threshold of the structure’s behavior within the defined range.

Relaxation and derelaxation of pure and hydrogenated amorphous silicon during thermal annealing experiments

The structural relaxation of pure amorphous silicon (a-Si) and hydrogenated amorphous silicon (a-Si:H) materials, that occurs during thermal annealing experiments, has been analyzed by Raman spectroscopy and differential scanning calorimetry. Unlike a-Si, the heat evolved from a-Si:H cannot be explained by relaxation of the Si-Si network strain but it reveals a derelaxation of the bond angle strain. Since the state of relaxation after annealing is very similar for pure and hydrogenated materials, our results give strong experimental support to the predicted configurational gap between a-Si and crystalline silicon

Percepció de dificultat i esforç en la mobilització de persones dependents, en el seu entorn domiciliari, per part dels seus cuidadors, abans i després de la utilització de llençols lliscants

Les persones amb dependència necessiten ajuda en la mobilització al llit, que suposa un esforç per a la persona cuidadora. La percepció de dificultat en dur a terme aquestes tasques pot afectar negativament la qualitat de vida de les persones cuidadores i també la de les persones dependents. L’objectiu d’aquest estudi va ser investigar si la utilització de superfícies de reducció de la fricció (tipus llençols lliscants) redueix la dificultat percebuda per les persones cuidadores i les persones dependents en la mobilització al llit. Mètodes: es va dur a terme un estudi quasi experimental a domicili en una mostra seleccionada a conveniència de 12 persones amb dependència i els seus cuidadors en diverses localitats. Es va avaluar la percepció de dificultat en la mobilització per part dels cuidadors i les persones dependents abans i després d’una intervenció formativa simultània a la utilització de llençols lliscants. Resultats: el perfil del cuidador és el d’una dona de mitjana edat amb una relació filial amb la persona dependent i sense formació específica en mètodes de mobilització de persones dependents. El perfil de la persona dependent és el d’una dona major de 80 anys amb una gran dependència que necessita ajuda de la persona que la cuida en les maniobres de redreçament i trasllat al llit. En una escala de percepció de la dificultat de 0 a 10, les mitjanes de les puntuacions observades en els cuidadors abans de la intervenció van ser de 6,9 (DE: 3,1) en el redreçament cap amunt i de 7,1 (DE: 3,1) en el trasllat lateral; després de la intervenció van ser d’1,25 (DE: 1,8) en el redreçament cap amunt i d’1,45 (DE: 1,6) en la mobilització lateral. En la mateixa escala, les mitjanes de les puntuacions observades en les persones dependents abans de la intervenció van ser de 8,6 (DE: 2,3) en el redreçament cap amunt i de 8,6 (DE: 2,3) en el trasllat cap als costats, i després de la intervenció van ser de 2 (DE: 2,6) en els redreçaments cap amunt i de 2 (DE: 2,6) en els trasllats cap als costats. Comparant les puntuacions d’abans i després de la intervenció, observem que la dificultat percebuda per part dels cuidadors de les persones dependents va disminuir de manera significativa (p < 0,001); en les persones dependents també va disminuir, però la disminució no va arribar a ser significativa (p = 0,057). Conclusions: els resultats observats mostren que la utilització de llençols lliscants millora la qualitat de vida dels cuidadors, mesurada per la percepció de la dificultat en les maniobres de mobilització al llit. Així mateix, la seva utilització pot contribuir a un millor envelliment actiu. Caldria fer estudis que permetin quantificar l’esforç físic necessari i el cost-benefici que suposa la utilització d’aquests dispositius.

The Impact of Aspen and Alder on the Quality of NHBK

The purpose of this work was to study the effect of aspen and alder on birch cooking and the quality of the pulp produced. Three different birch kraft pulps were studied. As a reference, pure aspen and alder were included. The laboratory trials were done at the UPM Research Centre in Lappeenranta, Finland. The materials used were birch, aspen and alder mill chips that were collected around the area of South-Carelia in Finland. The chips used in the study were pulped using a standard kraft process. The pulps including birch fibres were ECF-bleached at laboratory scale to a target brightness of 85 %. The bleached pulps were beaten at low consistency by a laboratory Voith Sulzer refiner and tested for optical and physical properties. The theoretical part is a study of hardwoods that takes into accounts the differences between birch, aspen and alder. Major sub-areas were fibre and paper-technical properties as well as chemical composition and their influence on the different properties. The pulp properties of birch, aspen and alder found in previous studies were reported. Russian hardwood forest resources were also investigated. The fundamentals of kraft pulping and bleaching were studied at the end of theoretical part. The major effect of replacing birch with aspen and alder was the deterioration (lowering) of tensile and tear strengths. In other words, addition of aspen and alder to a birch furnish reduced strength properties. The reinforcement ability of the tested pulps was the following: 100 % birch > 80 % birch, 20 % aspen > 70 % birch, 20 % aspen, 10 % alder. The second thing noted was that blending of birch together with aspen and alder give better smoothness, optical properties and also formation. It can be concluded, that replacement of birch with alder during cooking by more than 10 % can negatively affect on the paper-technical properties of birch pulp. Mixing pure birch and aspen pulps would be more beneficial when producing printing paper made from chemical pulp.

Happaman hydrometallurgisen PLS-liuoksen puhdistaminen kiintoaineesta kalvosuodatustekniikalla

Tässä diplomityössä tutkittiin keraamisten mikrosuodatuskalvojen soveltuvuutta kiintoaineen erottamiseen happamasta PLS-liuoksesta eri huokoskoon omaavilla mikrosuodatuskalvoilla. Koelaitteistolla suodatettiin puhdasta vettä, kaoliinipitoista vesiliuosta sekä hapanta kuparia, kalsiumia ja kaoliinia sisältävää malliliuosta. Koeajojen tavoitteena oli saada tietoa permeaattivuon maksimimäärästä eri mikrosuodatuskalvoilla sekä tuotteen puhtaudesta. Näiden lisäksi saatiin tietoa kalvojen likaantumisesta ajon aikana. Teoriaosassa käsiteltiin yleisesti kalvosuodatusta, esitettiin yleiset kalvotekniset menetelmät ja sovellukset sekä käytiin läpi tutkimuksia samankaltaisiin kalvoihin ja sovelluksiin liittyen. Lisäksi teoriaosuudessa pohdittiin mahdollisuutta käyttää myös muita, kuin putkimoduulisia mikrosuodatuskalvoja. Myös työhön oleellisena taustana kuuluvaa hydrometallurgiaa tarkasteltiin teoreettiselta kannalta. Puhtaan veden suodatuskoetuloksista havaittiin, että kaikki kalvot jäivät selvästi valmistajan ilmoittamista arvoista. 1,0 µm CoMetas CoMem® kalvon teoreettinen vesivuo on 10 m3/(h bar) ja 3,0 µm CoMetas CoMem® teoreettinen vesivuo on yli 50 m3/(h bar). Näistä parhaimman vuon arvon sai 1,0 µm CoMetas CoMem® mikrosuodatuskalvo. Tämä kalvo oli paras sekä veden suodatuksissa että malliliuoksella tehdyillä suodatuksilla. Malliliuoksella saavutettiin n. 2000 L/(m2 h) paineen ollessa 2,0 bar ja virtausnopeuden ollessa 4,4 m/s. Vastaavat vesiajon tulokset olivat n. 1100 L/(m2 h) paineen ollessa 1,0 bar ja virtausnopeuden 2,9 m/s. Kaikki kolme käytettyä kalvoa pidättivät kaoliiniliuoksen 81–100 %:sesti. Kuparipitoista malliliuosta suodatettaessa pystyttiin vastaavasti erottamaan 77–99 % kiintoaineesta. Koeajoissa kuitenkin havaittiin huomattava vuon arvojen putoaminen, joka johtui kalvon likaantumisesta. Huomioitavaa oli kuitenkin, että hapanta malliliuosta suodatettaessa permeaattivuon arvot olivat kaoliiniliuoksen suodatuksessa saatuja vastaavia arvoja korkeammat.

Enquesta sobre l’ús i la satisfacció de les biblioteques de la UPC per part de l’estudiantat : curs 2014/2015

Per tal de valorar el grau de satisfacció que té l’estudiantat de les biblioteques de la UPC, el Servei de Biblioteques, Publicacions i Arxius de la UPC elabora amb periodicitat biennal l’Enquesta sobre l’ús i la satisfacció de les biblioteques de la UPC per part de l’estudiantat.Atès que els cursos 2008/2009 i 2012/2013 no es va lliurar l’enquesta i que la primera es va realitzar el curs 1994/1995, els resultats que es presenten en aquest document corresponen a la novena edició.L’enquesta té com a objectiu principal obtenir informació sobre la percepció global que tenen de les biblioteques els seus usuaris, així com conèixer l’ús habitual que en fan i el grau de satisfacció que tenen dels seus espais, equipaments, serveis i col·leccions.

Special issue on evolving the e-marketing mindset towards the social web model - Editorial Part 2

In the previous issue of IJEMR, we introduced the general framework and the main ideas justifying this special editorial project. To avoid repetition of the background themes to the current issue, the reader should consult the previous edition. Here, we present the second part of contributions selected for publication.

Special issue on evolving the e-marketing mindset towards the social web model - Editorial Part 1

Con este proyecto editorial nuestro objetivo es promover un campo de investigación clave en la comercialización de hoy, es decir, la evolución de la mentalidad e-marketing hacia el nuevo modelo de web social.

Effects of Cadmium and mercury on the upper part of skeletal muscle glycolysis in mice.

The effects of pre-incubation with mercury (Hg2+) and cadmium (Cd2+) on the activities of individual glycolytic enzymes, on the flux and on internal metabolite concentrations of the upper part of glycolysis were investigated in mouse muscle extracts. In the range of metal concentrations analysed we found that only hexokinase and phosphofructokinase, the enzymes that shared the control of the flux, were inhibited by Hg2+ and Cd2+. The concentrations of the internal metabolites glucose-6-phosphate and fructose-6-phosphate did not change significantly when Hg2+ and Cd2+ were added. A mathematical model was constructed to explore the mechanisms of inhibition of Hg2+ and Cd2+ on hexokinase and phosphofructokinase. Equations derived from detailed mechanistic models for each inhibition were fitted to the experimental data. In a concentration-dependent manner these equations describe the observed inhibition of enzyme activity. Under the conditions analysed, the integral model showed that the simultaneous inhibition of hexokinase and phosphofructokinase explains the observation that the concentrations of glucose-6-phosphate and fructose-6-phosphate did not change as the heavy metals decreased the glycolytic flux.