Geopolymers as infill material for conservation of azulejos

The restoration materials currently used to fill gaps in architectural historical azulejos (e.g. lime or organic resin pastes) usually show serious drawbacks in terms of compatibility, effectiveness and durability. The existing solutions do not fully protect azulejos in outdoor conditions and frequently result in further deterioration. Geopolymers can be a potential solution for azulejo lacunae infill given the chemical-mineralogical similitude to the ceramic body, and also the durability and versatile range of physical properties that can be obtained through the manipulation of their formulation and curing conditions. This work presents and discusses the viability of the use of geopolymeric pastes to fill lacunae in azulejos or to act as “cold” cast ceramic tile surrogates reproducing missing azulejo fragments. The formulation of geopolymers, namely the type of activators, the aluminosilicate source, the amount of water (to meet adequate workability requirements) and curing conditions were studied. The need for post-curing desalination was also considered envisaging their application in the restoration of outdoor architectural historical azulejos frequently exposed to adverse environmental conditions. The possible advantages and disadvantages of the use of geopolymers in the conservation of azulejos are also discussed. Several techniques were used to study the chemical and physical behavior of geopolymers, namely FT-IR, XRD, MIP, SEM-EDS, WDXRF, electrical conductivity, open porosity, bending strength, adhesion strength, water vapour permeability, thermal expansion and hydric expansion. The results indicate that geopolymers are a promising material for restoration of azulejos, exhibiting some properties, such as adhesion to the ceramic substrate, higher than inorganic materials used nowadays, such as aerial lime based pastes.

Al-doped ZnO ceramic sputtering targets based on nanocrystalline powders produced by emulsion detonation synthesis – deposition and application as a transparent conductive oxide material

Transparent conducting oxides (TCOs) have been largely used in the optoelectronic industry due to their singular combination of low electrical resistivity and high optical transmittance. They are usually deposited by magnetron sputtering systems being applied in several devices, specifically thin film solar cells (TFSCs). Sputtering targets are crucial components of the sputtering process, with many of the sputtered films properties dependent on the targets characteristics. The present thesis focuses on the development of high quality conductive Al-doped ZnO (AZO) ceramic sputtering targets based on nanostructured powders produced by emulsion detonation synthesis method (EDSM), and their application as a TCO. In this sense, the influence of several processing parameters was investigated from the targets raw-materials synthesis to the application of sputtered films in optoelectronic devices. The optimized manufactured AZO targets present a final density above 99 % with controlled grain size, an homogeneous microstructure with a well dispersed ZnAl2O4 spinel phase, and electrical resistivities of ~4 × 10-4 Ωcm independently on the Al-doping level among 0.5 and 2.0 wt. % Al2O3. Sintering conditions proved to have a great influence on the properties of the targets and their performance as a sputtering target. It was demonstrated that both deposition process and final properties of the films are related with the targets characteristics, which in turn depends on the initial powder properties. In parallel, the influence of several deposition parameters in the film´s properties sputtered from these targets was investigated. The sputtered AZO TCOs showed electrical properties at room temperature that are superior to simple oxides and comparable to a reference TCO – indium tin oxide (ITO), namely low electrical resistivity of 5.45 × 10-4 Ωcm, high carrier mobility (29.4 cm2V-1s-1), and high charge carrier concentration (3.97 × 1020 cm-3), and also average transmittance in the visible region > 80 %. These superior properties allowed their successful application in different optoelectronic devices.

Torrefação de biomassa de Arundo donax L. e de Phoenix canariensis com vista à sua valorização energética ou material

A torrefação é vista como um pré-tratamento térmico que introduz modificações na biomassa, ou em resíduos de biomassa, que facilitam o seu processamento mecânico e aumentam a sua estabilidade e densidade energética, potenciando, assim, uma valorização posterior. Neste trabalho, estudou-se o impacte da torrefação na gama de 200 a 350 ºC e tempos de residência entre 15 e 90 min nas propriedades da biomassa proveniente da herbácea Arundo donax L. e das palmeiras Phoenix canariensis, espécies muito abundantes em vários locais do país, tendo em vista a sua posterior valorização. A proliferação descontrolada do arundo e a praga do escaravelho das palmeiras leva a que estas espécies sejam alvo de frequentes operações de remoção. A sua estrutura altamente fibrosa dificulta e encarece estas operações, que acarretam custos significativos para as câmaras municipais, e não se conhecem medidas para a sua valorização material ou energética. A torrefação foi também aplicada a peletes de resíduos de pinheiro, na gama de 200 a 250 ºC e com tempos de residência de 30 e 60 min, para averiguar o seu impacte na qualidade desse biocombustível sólido. A torrefação permitiu obter peletes mais resistentes à biodegradação, devido à redução do teor de humidade para valores residuais, sem aumentar significativamente o seu teor de cinzas e sem afetar de forma relevante a sua durabilidade, o teor de finos ou a densidade aparente. Com a biomassa de arundo e de palmeira obtiveram-se produtos com maior poder calorífico e com melhor moabilidade. No entanto, a acentuada diminuição dos rendimentos mássico e energético e o elevado teor de cinzas constrangem a sua utilização como biocombustíveis sólidos. Desta forma, optou-se por testar a sua valorização como adsorventes do corante azul de metileno, bastante comum, por exemplo, na indústria têxtil, nos curtumes ou nas industrias do papel. Os estudos de adsorção revelaram maior afinidade pelo corante por parte da biomassa sujeita a torrefação mais ligeira, com eficiências de remoção muito próximas das do carvão ativado comercial, para concentrações iniciais de corante até 200 mg/L. As isotérmicas foram melhor ajustadas ao modelo de Langmuir, que revelou capacidades máximas de adsorção na monocamada entre 59,92 e 92,68 mg/g, tendo as curvas de cinética sido melhor descritas pelo modelo de pseudo-segunda ordem. A adsorção é bastante rápida nos primeiros minutos, essencialmente devido a atrações eletrostáticas, sendo inicialmente controlada pela difusão no filme e depois pela difusão nos poros. Os adsorventes revelaram seletividade por um corante catiónico e permitiram dessorção de corante, ao contrário do verificado com o carvão ativado comercial, o que é um aspeto da maior relevância tendo em mente a regeneração do adsorvente e a recuperação do corante.

Material Zoológico depositado nas coleções sistemáticas de entomologia do INPA, resultante do "Projeto INPA/MAX-PLANK" (Convênio CNPq/MGP)

As coleções de Entomolologia Sistemática do Instituto nacional de Pesquisas da Amazônia (INPA) em Manaus, Brasil, no momento, contém aproximadamente 16.350 exemplares de invertebrados e vertebrados identificados, representando 330a espécies e incluindo 692 tipos que foram depositados entre 1940 e 1982 por pesquisadores e associados do Instituto Max-Planck de Limnologia em Plön, Alemanha Ocidental.

O âmbito de aplicação material da legislação de proteção de dados pessoais e o tratamento de imagem por pessoa singular

Images have gained a never before seen importance. Technological changes have given the Information Society extraordinary means to capture, treat and transmit images, wheter your own or those of others, with or without a commercial purpose, with no boundaries of time or country, without “any kind of eraser”. From the several different ways natural persons may engage in image processing with no commercial purpose, the cases of sharing pictures through social networks and video surveillance assume particular relevance. Consequently there are growing legitimate concerns with the protection of one's image, since its processing may sometimes generate situations of privacy invasion or put at risk other fundamental rights. With this in mind, the present thesis arises from the question: what are the existent legal instruments in Portuguese Law that enable citizens to protect themselves from the abusive usage of their own pictures, whether because that image have been captured by a smartphone or some video surveillance camera, whether because it was massively shared through a blog or some social network? There is no question the one's right to not having his or her image used in an abusive way is protected by the Portuguese constitution, through the article 26th CRP, as well as personally right, under the article 79th of the Civil Code, and finally through criminal law, articles 192nd and 193rd of the Criminal Code. The question arises in the personal data protection context, considering that one's picture, given certain conditions, is personal data. Both the Directive 95/46/CE dated from 1995 as well as the LPD from 1998 are applicable to the processing of personal data, but both exclude situations of natural persons doing so in the pursuit of activities strictly personal or family-related. These laws demand complex procedures to natural persons, such as the preemptive formal authorisation request to the Data Protection National Commission. Failing to do so a natural person may result in the application of fines as high as €2.500,00 or even criminal charges. Consequently, the present thesis aims to study if the image processing with no commercial purposes by a natural person in the context of social networks or through video surveillance belongs to the domain of the existent personal data protection law. To that effect, it was made general considerations regarding the concept of video surveillance, what is its regimen, in a way that it may be distinguishable from Steve Mann's definition of sousveillance, and what are the associated obligations in order to better understand the concept's essence. The application of the existent laws on personal data protection to images processing by natural persons has been analysed taking into account the Directive 95/46/CE, the LPD and the General Regulation. From this analysis it is concluded that the regimen from 1995 to 1998 is out of touch with reality creating an absence of legal shielding in the personal data protection law, a flaw that doesn't exist because compensated by the right to image as a right to personality, that anyway reveals the inability of the Portuguese legislator to face the new technological challenges. It is urgent to legislate. A contrary interpretation will evidence the unconstitutionality of several rules on the LPD due to the obligations natural persons are bound to that violate the right to the freedom of speech and information, which would be inadequate and disproportionate. Considering the recently approved General Regulation and in the case it becomes the final version, the use for natural person of video surveillance of private spaces, Google Glass (in public and private places) and other similar gadgets used to recreational purposes, as well as social networks are subject to its regulation only if the images are shared without limits or existing commercial purposes. Video surveillance of public spaces in all situations is subject to General Regulation provisions.

Natural hydraulic lime (nhl3.5) mortars with scrap tire rubber

The use of wastes and industrial by-products as building materials is an important issue in order to decrease costs with waste management and the embodied energy of building products. In this study scrap tire rubber was used as additional aggregate of mortars based on natural hydraulic lime NHL 3.5 and natural sand. Different particle size fractions and proportions of scrap tire rubber were used: a mix obtained directly from industry and separated fine, medium and coarse fractions; 0 %, 18 %, 36 % and 54 % of the weight of binder, corresponding to 2.5 %, 5 % and 7.5 % of the weight of sand. As mortars based on NHL specifications became stricter with the current version of EN 459–1:2015, the influence of the rubber’s additions on the mortars’ fresh state, mechanical and physical performance is presented in this work: flow table consistency, water retention, dynamic elasticity modulus, flexural and compressive strength, open porosity and bulk density, capillary absorption, drying and thermal conductivity are studied. The use of the rubber mix coming from the waste tire industry seems advantageous and may open possibilities for use as raw material by the mortars industry.

A type system for value-dependent information flow analysis

Information systems are widespread and used by anyone with computing devices as well as corporations and governments. It is often the case that security leaks are introduced during the development of an application. Reasons for these security bugs are multiple but among them one can easily identify that it is very hard to define and enforce relevant security policies in modern software. This is because modern applications often rely on container sharing and multi-tenancy where, for instance, data can be stored in the same physical space but is logically mapped into different security compartments or data structures. In turn, these security compartments, to which data is classified into in security policies, can also be dynamic and depend on runtime data. In this thesis we introduce and develop the novel notion of dependent information flow types, and focus on the problem of ensuring data confidentiality in data-centric software. Dependent information flow types fit within the standard framework of dependent type theory, but, unlike usual dependent types, crucially allow the security level of a type, rather than just the structural data type itself, to depend on runtime values. Our dependent function and dependent sum information flow types provide a direct, natural and elegant way to express and enforce fine grained security policies on programs. Namely programs that manipulate structured data types in which the security level of a structure field may depend on values dynamically stored in other fields The main contribution of this work is an efficient analysis that allows programmers to verify, during the development phase, whether programs have information leaks, that is, it verifies whether programs protect the confidentiality of the information they manipulate. As such, we also implemented a prototype typechecker that can be found at http://ctp.di.fct.unl.pt/DIFTprototype/.

Enraizamento de estacas de material juvenil de Pau-rosa (Aniba rosaeodora Ducke - Lauraceae)

RESUMOO presente, trabalho teve como objetivo o enraizamento de estacas de material juvenil ramos laterais e terminais) de pau-rosa, através do uso das concentrações de 2000 ppm, 4000 ppm e 6000 ppm de ácido indol-3-butírico (AIB) na forma líquida. Αs condições do enraizamento αs estacas foram oferecidas mediante o uso de ncbulização intermitente, regulada em 20 segundos para espécies com intervalos de 20 minutos. O substrato utilizado foi terriço + areia, na proporção de 4:1. Semanalmente foram feitas aplicações de fertilizante foliar. Aos 210 dias do plantio, as estacas foram retiradas, do substrato e avaliados os seguintes parâmetros: porcentagem de enraizamento, porcentagem de sobrevivência, tamanho das raízes e Peso da matéria fresca das raízes. Os resultados obtidos mostram que a emissão de raízes das estacas de material juvenil, possivelmente independe do uso do ácido indol-3-butírico (AIB).

Sources to study Antiquity: Between texts and material culture. Abstract Book

FCT

Reporting cash flow evidence from campanies listed in the Euronext Lisbon

Based on the 2013 and 2014 consolidated statements of cash flows of companies listed in Euronext Lisbon, this Work Project analyses the cash flow disclosures, namely if they are in accordance with International Accounting Standards 7, specifically the format, the choice of classification interests, dividends paid and received and the composition of cash and cash equivalents. Additionally, quality of income ratio is analyzed due to its importance for users of financial statements. The results show evidence of uniformity and consistency in the use of the direct method for reporting operational activities in both years, but there are some differences regarding the disclosure of interests and dividends, paid and received, respectively.

Estratégias pedagógicas na aprendizagem da emissão de som no clarinete: respiração, material e metodologias de estudo

Relatório de estágio de mestrado em Ensino de Música

Plastic-damage smeared crack model to simulate the behaviour of structures made by cement based materials

This work proposes a constitutive model to simulate nonlinear behaviour of cement based materials subjected to different loading paths. The model incorporates a multidirectional fixed smeared crack approach to simulate crack initiation and propagation, whereas the inelastic behaviour of material between cracks is treated by a numerical strategy that combines plasticity and damage theories. For capturing more realistically the shear stress transfer between the crack surfaces, a softening diagram is assumed for modelling the crack shear stress versus crack shear strain. The plastic damage model is based on the yield function, flow rule and evolution law for hardening variable, and includes an explicit isotropic damage law to simulate the stiffness degradation and the softening behaviour of cement based materials in compression. This model was implemented into the FEMIX computer program, and experimental tests at material scale were simulated to appraise the predictive performance of this constitutive model. The applicability of the model for simulating the behaviour of reinforced concrete shear wall panels submitted to biaxial loading conditions, and RC beams failing in shear is investigated.

Comparative environmental life-cycle analysis of concretes using biomass and coal fly ashes as partial cement replacement material

Nowadays, the concrete production sector is challenged by attempts to minimize the usage of raw materials and energy consumption, as well as by environmental concerns. Therefore, it is necessary to choose better options, e.g. new technologies or materials with improved life-cycle performance. One solution for using resources in an efficient manner is to close the materials' loop through the recycling of materials that result either from the end-of-life of products or from being the by-product of an industrial process. It is well known that the production of Portland cement, one of the materials most used in the construction sector, has a significant contribution to the environmental impacts, mainly related with carbon dioxide emission. Therefore, the study and utilization of by-products or wastes usable as cement replacement in concrete can supply more sustainable options, provided that these type of concrete produced has same durability and equivalent quality properties as standard concrete. This work studied the environmental benefits of incorporating different percentages of two types of fly ashes that can be used in concrete as cement replacement. These ashes are waste products of power and heat production sectors using coal or biomass as fuels. The results showed that both ashes provide a benefit for the concrete production both in terms of environmental impact minimization and a better environmental performance through an increase in cement replacement. It is possible to verify that the incorporation of fly ashes is a sustainable option for cement substitution and a possible path to improve the environmental performance of the concrete industry.