Seasonal variations of outdoor air pollution and factors driving them in the school environment in rural Bhutan

A quantitative understanding of outdoor air quality in school environments is crucial given that air pollution levels inside classrooms are significantly influenced by outdoor pollution sources. To date, only a handful of studies have been conducted on this important topic in developing countries. The aim of this study was to quantify pollutant levels in the outdoor environment of a school in Bhutan and assess the factors driving them. Measurements were conducted for 16 weeks, spanning the wet and dry seasons, in a rural school in Bhutan. PM10, PM2.5, particle number (PN) and CO were measured daily using real-time instruments, while weekly samples for volatile organic compounds (VOCs), carbonyls and NO2 were collected using a passive sampling method. Overall mean PM10 and PM2.5 concentrations (µg/m3) were 27 and 13 for the wet, and 36 and 29 for the dry season, respectively. Only wet season data were available for PN concentrations, with a mean of 2.56 × 103 particles/cm3. Mean CO concentrations were below the detection limit of the instrumentation for the entire measurement period. Only low levels of eight VOCs were detected in both the wet and dry seasons, which presented different seasonal patterns in terms of the concentration of different compounds. The notable carbonyls were formaldehyde and hexaldehyde, with mean concentrations (µg/m3) of 2.37 and 2.41 for the wet, and 6.22 and 0.34 for the dry season, respectively. Mean NO2 cocentration for the dry season was 1.7 µg/m3, while it was below the detection limit of the instrumentation for the wet season. The pollutant concentrations were associated with a number of factors, such as cleaning and combustion activities in and around the school. A comparison with other school studies showed comparable results with a few of the studies, but in general, we found lower pollutant concentrations in the present study.

Leveraging the repository infrastructure to curate institutional heritage materials, learning objects and data assets

Developing and maintaining a successful institutional repository for research publications requires a considerable investment by the institution. Most of the money is spent on developing the skill-sets of existing staff or hiring new staff with the necessary skills. The return on this investment can be magnified by using this valuable infrastructure to curate collections of other materials such as learning objects, student work, conference proceedings and institutional or local community heritage materials. When Queensland University of Technology (QUT) implemented its repository for research publications (QUT ePrints) over 11 years ago, it was one of the first institutional repositories to be established in Australia. Currently, the repository holds over 29,000 open access research publications and the cumulative total number of full-text downloads for these document now exceeds 16 million. The full-text deposit rate for recently-published peer reviewed papers (currently over 74%) shows how well the repository has been embraced by QUT researchers. The success of QUT ePrints has resulted in requests to accommodate a plethora of materials which are ‘out of scope’ for this repository. QUT Library saw this as an opportunity to use its repository infrastructure (software, technical know-how and policies) to develop and implement a metadata repository for its research datasets (QUT Research Data Finder), a repository for research-related software (QUT Software Finder) and to curate a number of digital collections of institutional and local community heritage materials (QUT Digital Collections). This poster describes the repositories and digital collections curated by QUT Library and outlines the value delivered to the institution, and the wider community, by these initiatives.

The inner quality of an article: Will time tell?

In this paper, we assess whether quality survives the test of time in academia by comparing up to 80 years of academic journal article citations from two top journals, Econometrica and the American Economic Review. The research setting under analysis is analogous to a controlled real world experiment in that it involves a homogeneous task (trying to publish in top journals) by individuals with a homogenous job profile (academics) in a specific research environment (economics and econometrics). Comparing articles published concurrently in the same outlet at the same time (same issue) indicates that symbolic capital or power due to institutional affiliation or connection does seem to boost citation success at the beginning, giving those educated at or affiliated with leading universities an initial comparative advantage. Such advantage, however, does not hold in the long run: at a later stage,the publications of other researchers become as or even more successful.

Turbulence and Mixing in the Environment: Multi-Device Study in a Sub-tropical Estuary

In an estuary, mixing and dispersion result from a combination of large-scale advection and smallscale turbulence, which are complex to estimate. The predictions of scalar transport and mixing are often inferred and rarely accurate, due to inadequate understanding of the contributions of these difference scales to estuarine recirculation. A multi-device field study was conducted in a small sub-tropical estuary under neap tide conditions with near-zero fresh water discharge for about 48 hours. During the study, acoustic Doppler velocimeters (ADV) were sampled at high frequency (50 Hz), while an acoustic Doppler current profiler (ADCP) and global positioning system (GPS) tracked drifters were used to obtain some lower frequency spatial distribution of the flow parameters within the estuary. The velocity measurements were complemented with some continuous measurement of water depth, conductivity, temperature and some other physiochemical parameters. Thorough quality control was carried out by implementation of relevant error removal filters on the individual data set to intercept spurious data. A triple decomposition (TD) technique was introduced to access the contributions of tides, resonance and ‘true’ turbulence in the flow field. The time series of mean flow measurements for both the ADCP and drifter were consistent with those of the mean ADV data when sampled within a similar spatial domain. The tidal scale fluctuation of velocity and water level were used to examine the response of the estuary to tidal inertial current. The channel exhibited a mixed type wave with a typical phase-lag between 0.035π– 0.116π. A striking feature of the ADV velocity data was the slow fluctuations, which exhibited large amplitudes of up to 50% of the tidal amplitude, particularly in slack waters. Such slow fluctuations were simultaneously observed in a number of physiochemical properties of the channel. The ensuing turbulence field showed some degree of anisotropy. For all ADV units, the horizontal turbulence ratio ranged between 0.4 and 0.9, and decreased towards the bed, while the vertical turbulence ratio was on average unity at z = 0.32 m and approximately 0.5 for the upper ADV (z = 0.55 m). The result of the statistical analysis suggested that the ebb phase turbulence field was dominated by eddies that evolved from ejection type process, while that of the flood phase contained mixed eddies with significant amount related to sweep type process. Over 65% of the skewness values fell within the range expected of a finite Gaussian distribution and the bulk of the excess kurtosis values (over 70%) fell within the range of -0.5 and +2. The TD technique described herein allowed the characterisation of a broader temporal scale of fluctuations of the high frequency data sampled within the durations of a few tidal cycles. The study provides characterisation of the ranges of fluctuation required for an accurate modelling of shallow water dispersion and mixing in a sub-tropical estuary.

Making things happen: How the environment triggers action

Innovative research conducted by Dr Jan Golembiewski from Medical Architectures Australasia-Pacific, in the area of environmental design for mental healthcare helps us reflect, through experiential storytelling, on the importance of paying attention to positive environmental ‘triggers for action’ when designing physical spaces to help manage particular patients’ conditions. This article is written about the mental health experience specifically, however environmental design is an issue we can all relate to in our everyday lives (at home, at work, social spots or in places such as hospitals or retreats) when we instinctively notice a connection between our mental health and our surroundings or a healthy sense of place.

The Times They Are A Changin': The Effect of Institutional Change on Cooperative Behaviour at 26,000ft over Sixty Years

In 2006, Sir Edmund Hillary lambasted the modern climbing fraternity for abandoning other climbers to a slow frozen death on Everest, claiming that in his day they would never leave someone to die. This followed the controversial death of David Sharp, passed by an estimated 40 climbers who were more interested in the summit than the life of a fellow human being. But was this stinging criticism true or just the faded recollections of a former climbing giant? This book investigates that claim through a narrative analysis, which combines the empirical analysis of Hawley and Salisbury's Himalayan Expedition Database with the anecdotal evidence provided by a plethora of newspaper articles and books. While there is evidence supporting the claim that commercialization is to blame for the breakdown of pro-social behaviour, the results cannot conclude if it is the commercial climber or the operator driving the problem and that the Sherpa are the saving grace.

Recognising paediatric deterioration in a simulated environment

This thesis examined the impact of high fidelity patient simulation on paediatric critical care nurses' self-efficacy and knowledge for recognising and responding to paediatric deterioration. This research highlights the positive effect simulation education can have on nursing learning outcomes which may influence patient safety through the timely recognition and management of the deteriorating child.

Eating for health and the environment: Australian regulatory responses for dietary change

The Australian food system significantly contributes to a range of key environmental issues including harmful greenhouse gas emissions, air pollution, soil desertification, biodiversity loss and water scarcity. At the same time, the Australian s food system is a key cause of public health nutrition issues that stem from the co-existence of over- and under-consumption of dietary energy and nutrients. Within these challenges lie synergies and opportunities because a diet that has a lower environmental impact generally aligns with good nutrition. Australian State and Federal initiatives to influence food consumption patterns focus on individual body weight and ‘soft law’ interventions. These regulatory approaches, by focusing on select symptoms of food system failures, are fragmented, reductionist and inefficient. In order to illustrate this point, this paper will explore Australian regulatory responses to diet-related illnesses. The analysis will support the argument that only when regulatory responses to diets become embedded within reform of the current food system will substantial improvements to human and planetary health be achieved.

Understanding pressures on the future of roads: A sustainable built environment National Research Centre Discussion Paper

According to the Australian Government, when combined with expected population growth and internal migration, expected changes in temperature and rainfall are expected to increase road maintenance costs by over 30 percent by 2100. This presents a significant future economic risk, in response, this paper will discuss the potential for roads to improve their resilience to the impacts of climate change and other key pressures. The paper will also highlight how such measures can inform state and national main road infrastructure planning and reduce future associated risks and costs.

Good for the environment good for health

“First do no harm”. This phrase, attributed to the 19th century surgeon, Thomas Inman, 1 reflects an equivalent phrase found in Epidemics, Book I of the Hippocratic School, “Practise two things in your dealings with disease: either help or do not harm the patient”. Pharmacists have played, and continue to play, an important role in reducing patient harm from medication misadventures. Now, they have a new role to play. The delivery of pharmaceutical care contributes to climate change (e.g. through the embedded carbon in the manufacture and distribution of medicines, disposal of waste, and energy and water use),2 which in turn has a negative impact on health. 3,4 This paradox argues a moral and ethical obligation by pharmacists, to deliver pharmaceutical care more sustainably – do no harm. Sustainability “…. is concerned, on one hand, with resources and how we can preserve them, and, on the other hand, with waste products and how we can best reduce or dispose of them.” 5(p.37) It is about preserving and nurturing Earth’s resources and systems for this generation and future generations to enjoy. Pharmacists play an important role in preventative health strategies such as smoking cessation, promotion of healthier lifestyles and vaccination/immunisation programmes and have the potential to also play a significant role in delivering pharmaceutical care more sustainably. Sustainable pharmaceutical care may be considered a virtuous cycle - what is good for the environment is also good for our health. 5 The good news for community pharmacy owners and managers is that implementing sustainability initiatives in the pharmacy can also have significant financial co-benefits.

A taste of best practice in engineering sustainable solutions

This paper asks the question to what scale and speed does society need to reduce its ecological footprint and improve resource productivity to prevent further overshoot and return within the ecological limits of the earth’s ecological life support systems? How fast do these changes need to be achieved? The paper shows that now a large range of studies find that engineering sustainable solutions need to be roughly an order or magnitude resource productivity improvement (sometimes called a Factor of 10, or a 90% reduction) by 2050 to achieve real and lasting ecological sustainability. This marks a significant challenge for engineers – indeed all designers and architects, where best practice in engineering sustainable solutions will need to achieve large resource productivity targets. The paper brings together examples of best practice in achieving these large targets from around the world. The paper also highlights key resources and texts for engineers who wish to learn how to do it. But engineers need to be realistic and patient. Significant barriers exist to achieving Factor 4-10 such as the fact that infrastructure and technology rollover and replacement is often slow. This slow rollover of the built environment and technology is the context within which most engineers work, making the goal of achieving Factor 10 all the more challenging. However, the paper demonstrates that by using best practice in engineering sustainable solutions and by addressing the necessary market, information and institutional failures it is possible to achieve Factor 10 over the next 50 years. This paper draws on recent publications by The Natural Edge Project (TNEP) and partners, including Hargroves, K. Smith, M. (Eds) (2005) The Natural Advantage of Nations: Business Opportunities, Innovation and Governance for the 21st Century, and the TNEP Engineering Sustainable Solutions Program - Critical Literacies for Engineers Portfolio. Both projects have the significant support of Engineers Australia. its College of Environmental Engineers and the Society of Sustainability and Environmental Engineering.

Intellectual property, innovation, and the environment (2014) edited by Peter Menell and Sarah Tran: A review

Peter S. Menell and Sarah M. Tran (ed.), Intellectual Property, Innovation and the Environment, Cheltenham (UK) and Northampton (MA): Edward Elgar, 2014, 756 pp Hardback 978 1 78195 160 6, http://www.e-elgar.com/bookentry_main.lasso?id=15063 There has been a longstanding deadlock over intellectual property and clean technologies in international climate talks. The United States — and other developed countries such as Japan, Denmark Germany, the United Kingdom, Australia, and New Zealand — have pushed for stronger and longer protection of intellectual property rights related to clean technologies. BASIC countries — such as Brazil, South Africa, India, and China — have pushed for greater flexibilities in respect of intellectual property for the purpose of addressing climate change and global warming. Small island states, least developed countries, and nations vulnerable to climate change have called for climate-adaptation and climate-mitigation technologies to be available in the public domain. In the lead-up to the United Nations Climate Summit in New York on the 23rd September 2014, it is timely to consider the debate over intellectual property, innovation, the environment, and climate change.

Submission on the Hawke Interim Review of the Environment Protection and Biodiversity Conservation Act 1999 (Cth)

There are currently no regulatory mechanisms, laws or policies that specifically provide rights to Indigenous peoples over their Indigenous knowledge and intellectual property. We strongly recommend that the commonwealth take the lead to ensure that national sui generis laws are developed (perhaps to operate initially in areas of Cth jurisdiction, such as IPAs and national parks). The development of such laws should be in tandem with practical guidelines to assist their implementation. A comprehensive, nationally consistent scheme for access to genetic resources, which offers meaningful protection of traditional knowledge and substantive benefit-sharing with Indigenous communities, has to be developed. There are already a range of reports/resources that urge these same reforms and that we direct the Enquiry to again; these include the Voumard Report (2000) – especially Fourmile’s Appendix 10 – “Indigenous Interests”, and Terri Jankes “Our Culture, Our Future (1998).

A comparison land-water environment of maximal voluntary isometric contraction during manual muscle testing through surface electromyography

Background The aim of this study was to compare through surface electromyographic (sEMG) recordings of the maximum voluntary contraction (MVC) on dry land and in water by manual muscle test (MMT). Method Sixteen healthy right-handed subjects (8 males and 8 females) participated in measurement of muscle activation of the right shoulder. The selected muscles were the cervical erector spinae, trapezius, pectoralis, anterior deltoid, middle deltoid, infraspinatus and latissimus dorsi. The MVC test conditions were random with respect to the order on the land/in water. Results For each muscle, the MVC test was performed and measured through sEMG to determine differences in muscle activation in both conditions. For all muscles except the latissimus dorsi, no significant differences were observed between land and water MVC scores (p = 0.063–0.679) and precision (%Diff = 7–10%) were observed between MVC conditions in the muscles trapezius, anterior deltoid and middle deltoid. Conclusions If the procedure for data collection is optimal, under MMT conditions it appears that comparable MVC sEMG values were achieved on land and in water and the integrity of the EMG recordings were maintained during wáter immersion.

Understanding the performance of green commercial buildings: a Sustainable Built Environment National Research Centre (SBEnrc) briefing report

Efforts to reduce carbon emissions in the buildings sector have been focused on encouraging green design, construction and building operation; however, the business case is not very compelling if considering the energy cost savings alone. In recent years green building has been driven by a sense that it will improve the productivity of occupants,something with much greater economic returns than energy savings. Reducing energy demand in green commercial buildings in a way that encourages greater productivity is not yet well understood as it involves a set of complex and interdependent factors. This project investigates these factors and focuses on the performance of and interaction between: green design elements, internal environmental quality, occupant experience, tenant/leasing agreements, and building regulation and management. This paper suggests six areas of strategic research that are needed to understand how conditions can be created to support productivity in green buildings, and deliver significant energy consumption reductions.