Antibacterial efficacy of endodontic irrigating solutions and their combinations in root canals contaminated with Enterococcus faecalis

Objective. The objective of this study was to evaluate the antibacterial efficacy of irrigating solutions and their combinations against Enterococcus faecalis. Study design. One hundred ten single-rooted human teeth were inoculated with E. faecalis and incubated for 21 days. Teeth were divided according to the irrigant: Group I (GI), 2.5% sodium hypochlorite solution (NaOCl); GII, 2.5% NaOCl + 10% citric acid; GIII, 2.5% NaOCl + apple cider vinegar; GIV, apple cider vinegar; GV, 2% chlorhexidine solution; GVI, 1% peracetic acid; GVII, saline solution. Microbiological samples were taken after root canal preparation and 7 days later. Data were submitted to ANOVA (5%). Results. All solutions promoted reduction of E. faecalis after instrumentation, but bacterial counts were higher in the final sample. GI, GV, and GVI had lower bacterial counts than the other groups. Conclusions. The irrigating solutions may present activity but do not eradicate E. faecalis in the root canal system. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2011; 112:396-400)

The effects of occlusal loading on the margins of cervical restorations

Background. Researchers have proposed the restoration of abfraction lesions, but limited information is available about the effects of occlusal loading on the margins of such restorations. Because abfraction is a well-recognized problem, the authors conducted a study to assess the effects of occlusal loading on the margins of cervical restorations. Methods. The authors prepared 40 wedge-shaped cavities in extracted premolars and restored them with a resin-based composite. They subjected specimens to occlusal loading (150 newtons, 101 cycles) on the buccal cusp, on the central fossa or on the lingual cusp, and they stored 1 the control group, specimens in deionized water. The authors used fluorescein to delimit marginal defects and evaluated the defects by using laser scanning confocal microscopy. Results. Results of chi(2) and Kruskal-Wallis tests (P < .05) showed that specimens subjected to occlusal loading had a higher percentage of marginal gaps (53.3 percent) than did the control specimens (10.0 percent). There were no differences between groups in marginal defect formation or in defect location, length or width. Conclusions. Occlusal loading led to a significant increase in gap formation at the margins of cervical resin-based composite restorations. Clinical Implications. The clinician cannot underestimate the effects of occlusal loading When restoring teeth with cervical wedge-shaped lesions. If occlusal loading is the main factor contributing to lesion formation, the clinician should identify and treat it before placing the restoration or otherwise run the risk that the restorative treatment will fail because of marginal gap formation.

Influence of curing rate on softening in ethanol, degree of conversion, and wear of resin composite

Purpose: To investigate the effect of curing rate on softening in ethanol, degree of conversion, and wear of resin composites. Methods: With a given energy density and for each of two different light-curing units (QTH or LED), the curing rate was reduced by modulating the curing mode. Thus, the irradiation of resin composite specimens (Filtek Z250, Tetric Ceram, Esthet-X) was performed in a continuous curing mode and in a pulse-delay curing mode. Wallace hardness was used to determine the softening of resin composite after storage in ethanol. Degree of conversion was determined by infrared spectroscopy (FTIR). Wear was assessed by a three-body test. Data were submitted to Levene`s test, one and three-way ANOVA, and Tukey HSD test (alpha= 0.05). Results: Immersion in ethanol, curing mode, and material all had significant effects on Wallace hardness. After ethanol storage, resin composites exposed to the pulse-delay curing mode were softer than resin composites exposed to continuous cure (P< 0.0001). Tetric Ceram was the softest material followed by Esthet-X and Filtek Z250 (P< 0.001). Only the restorative material had a significant effect on degree of conversion (P< 0.001): Esthet-X had the lowest degree of conversion followed by Filtek Z250 and Tetric Ceram. Curing mode (P= 0.007) and material (P< 0.001) had significant effect on wear. Higher wear resulted from the pulse-delay curing mode when compared to continuous curing, and Filtek Z250 showed the lowest wear followed by Esthet-X and Tetric Ceram. (Am J Dent 2011;24:115-118).

Immunohistochemical approach reveals involvement of inducible nitric oxide synthase in rat late development

To better understand the role of nitric oxide (NO) in mammal development, specifically in the transition of the fetal stages at birth, we studied the timing of cell-specific expression of inducible NO synthase (iNOS) isoform during gestational periods of rats, mainly at the late stages of intra-uterine development. Before experimentation, the samples were collected (from 17th to 21st gestational days), fixed in 10% buffered formalin and embedded in paraffin for histological procedures. Hereafter, the sections (5 mu m thickness) obtained from different embryos were immunostained by avidin-biotin-immunoperoxidase technique, by using antibody against iNOS isoform. The most of cell immunopositive was suggestive of granulocyte-like cells and those cells were resident close to the blood vessels in different organs, such as: lung, liver or bone marrow environment. Sometimes we noted immunopositive cells in the blood flow, as reported in the thymus. In agreement, iNOS expression, obtained by western blotting analysis, showed the same profile. Together, our data shows that iNOS expression increased gradually during the late stages of rat development (from E17 to E21) and it was executed by cells close to blood vessels. Thus, we can clearly to predict that this expression was finely modulated and it contributes for time-line dependent NO production during rat late development.

Expression of bone resorption regulators (RANK, RANKL, and OPG) in odontogenic tumors

Objective. To investigate the expression of bone resorption regulators (receptor activator of nuclear factor kappa B [RANK], RANK ligand [RANKL], and osteoprotegerin [OPG]) in calcifying cystic odontogenic tumor (CCOT), adenomatoid odontogenic tumor (AOT), calcifying epithelial odontogenic tumor (CEOT), odontogenic myxoma (OM), and ameloblastic fibroma (AF). Study design. The expression of these mediators was evaluated by means of immunohistochemistry. Results. All specimens demonstrated positive immunoreactivity to RANK, RANKL, and OPG. The quantification of these mediators in epithelium revealed a similar pattern of expression for RANKL and OPG in CCOT, AOT, CEOT, and AF. With regard to stromal/mesenchymal cells, the majority of AOT and CCOT cases showed a higher content of OPG than RANKL, whereas CEOT, OM, and especially AF had a tendency to present a greater content of RANKL than OPG. Conclusion. Our data indicate that the CCOT, AOT, CEOT, OM, and AF cell constituents express key regulators of bone metabolism that might locally modulate tumor-associated bone resorption. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2008;106:548-55)

Expression of matrix metalloproteinases-2 and-9 and RECK during alveolar bone regeneration in rat

MMPs are endopeptidases that play a pivotal role in ECM turnover. RECK is a single membrane-anchored MMP-regulator. Here, we evaluated the temporal and spatial expression of MMP-2, MMP-9, and RECK during alveolar bone regeneration. The maxillary central incisor of Wistar rats was extracted and the animals were killed at 1, 3, 7, 10, 14, 21, 28, and 42 days post-operatively (n = 3/period). The hemimaxillae were collected, demineralized and embedded in paraffin. Immunohistochemical analysis was performed by the immunoperoxidase technique with polyclonal antibodies. On day 1, polymorphonuclear cells in the blood clot presented mild immunolabeling for MMPs. During bone remodeling, osteoblasts facing new bone showed positive staining for gelatinases and RECK in all experimental periods. MMPs were also found in the connective tissue and endothelial cells. Our results show for the first time that inactive and/or active forms of MMP-2, MMP-9 and RECK are differentially expressed by osteogenic and connective cells during several events of alveolar bone regeneration. This may be important for the replacement of the blood clot by connective tissue, and in the formation, maturation and remodeling of new bone.

Progressive recovery of osseoperception as a function of the combination of implant-supported prostheses

The extraction of teeth involves the elimination of extremely sensitive periodontal mechanoreceptors, which play an important role in oral sensory perception. Objectives: The aim of this study was to evaluate the recovery of interocclusal sensory perception for micro-thickness in individuals with different types of implant-supported prostheses. Materials and Methods: Wearers of complete dentures (CDs) comprised the negative control group (group A, n=17). The experimental group consisted of wearers of prostheses supported by osseointegrated implants (Group B, n=29), which was subsequently divided into 4 subgroups: B(1) (n=5) - implant supported overdentures (ISO) occluding with CD; B(2) (n=6) - implant-supported fixed prostheses (ISFP) occluding with CD; B3 (n=8) - wearers of maxillary and mandibular ISFP, and B(4) (n=10) - ISFP occluding with natural dentition (ND). Individuals with ND represented the positive control group (Group C, n=24). Aluminum foils measuring 10 mu m, 24 mu m, 30 mu m, 50 mu m, 80 mu m, and 104 mu m thickness were placed within the premolar area, adding up to 120 tests for each individual. Results: The mean tactile thresholds of groups A, B(1), B(2), B(3), B(4), and C were 92 mu m, 27 mu m, 27 mu m, 14 mu m, 10 mu m, and 10 mu m, respectively. [Correction added after publication online 18 April 2008: in the preceding sentence 92 mu m, 27 mu m, 14 mu m, 10 mu m and 10 mu m, was corrected to 92 mu m, 27 mu m, 27 mu m, 14 mu m, 10 mu m and 10 mu m.] The Kruskal-Wallis test revealed significant difference among groups (P < 0.05). The Dunn test revealed that group A was statistically different from groups C, B(3), and B(4), and that B(1) and B(2) were statistically different from group C. Conclusion: Progressive recovery of osseoperception as a function of the combination of implant-supported prostheses could be observed. Moreover, ISO and/or ISFP combinations may similarly maximize the recovery of osseoperception.

Effect of repeated cycles of chemical disinfection on the roughness and hardness of hard reline acrylic resins

Objective: The aim of this study was to assess the effect of repeated cycles of five chemical disinfectant solutions on the roughness and hardness of three hard chairside reliners. Methods: A total of 180 circular specimens (30 mm x 6 mm) were fabricated using three hard chairside reliners (Jet; n = 60, Kooliner; n = 60, Tokuyama Rebase II Fast; n = 60), which were immersed in deionised water (control), and five disinfectant solutions (1%, 2%, 5.25% sodium hypochlorite; 2% glutaraldehyde; 4% chlorhexidine gluconate). They were tested for Knoop hardness (KHN) and surface roughness (mu m), before and after 30 simulated disinfecting cycles. Data was analysed by the factorial scheme (6 x 2), two-way analysis of variance (anova), followed by Tukey`s test. Results: For Jet (from 18.74 to 13.86 KHN), Kooliner (from 14.09 to 8.72 KHN), Tokuyama (from 12.57 to 8.28 KHN) a significant decrease in hardness was observed irrespective of the solution used on all materials. For Jet (from 0.09 to 0.11 mu m) there was a statistically significant increase in roughness. Kooliner (from 0.36 to 0.26 mu m) presented a statistically significant decrease in roughness and Tokuyama (from 0.15 to 0.11 mu m) presented no statistically significant difference after 30 days. Conclusions: This study showed that all disinfectant solutions promoted a statistically significant decrease in hardness, whereas with roughness, the materials tested showed a statistically significant increase, except for Tokuyama. Although statistically significant values were registered, these results could not be considered clinically significant.

Conservative approach for a clinical resolution of enamel white spot lesions

Enamel white spot lesions in anterior teeth that compromise esthetics are common. Microabrasion is indicated, since it affects enamel superficially. An acid-abrasive slurry with 37% phosphoric acid with pumice was used on the enamel for a controlled time period. Home bleaching with hydrogen peroxide was then used, further improving the final result. The method is safe, easy, and conservative and provides good esthetic results. (Quintessence Int 2011;42:423-426)

Rat forming incisor requires a rigorous ECM remodeling modulated by MMP/RECK balance

Reversion-inducing-cysteine-rich protein with Kazal motifs (RECK) is a single membrane-anchored MMP-regulator and regulates matrix metalloproteinases (MMP) 2, 9 and 14. In turn, MMPs are endopeptidases that play a pivotal role in remodeling ECM. In this work, we decided to evaluate expression pattern of RECK in growing rat incisor during, specifically focusing out amelogenesis process. Based on different kinds of ameloblasts, our results showed that RECK expression was conducted by secretory and post-secretory ameloblasts. At the secretory phase, RECK was localized in the infra-nuclear region of the ameloblast, outer epithelium, near blood vessels, and in the stellate reticulum. From the transition to the maturation phases, RECK was strongly expressed by non-epithelial immuno-competent cells (macrophages and/or dendritic-like cells) in the papillary layer. From the transition to the maturation stage, RECK expression was increased. RECK mRNA was amplified by RT-PCR from whole enamel organ. Here, we verified the presence of RECK mRNA during all stages of amelogenesis. These events were governed by ameloblasts and by non-epithelial cells residents in the enamel organ. Concluding, we found differential expression of MMPs-2, -9 and RECK in the different phases of amelogenesis, suggesting that the tissue remodeling is rigorously controlled during dental mineralization.

Clinical feasibility of mandibular implant overdenture retainers submitted to immediate load

Clinical feasibility of mandibular implant overdenture retainers submitted to immediate load Introduction: Millions of people around the world do not have access to the benefits of osseointegration. Treatments involving oral rehabilitation with overdentures have been widely used by specialists in the oral medicine field. This is an alternative therapy for retention and stability achievement in total prosthesis with conventional treatment, and two implants are enough to establish a satisfactory overdenture. Objective: The objectives of the study were to evaluate 16 patients of both sexes, with an average age of 47.4 +/- 4 years, using electromyographic analysis of masseter and temporal muscles and analyse the increase of incisive and molar maximal bite force with their existing complete dentures and following mandibular implant overdenture therapy to assess the benefits of this treatment. Materials and methods: For these tests, the Myosystem-BR1 electromyograph and the IDDK Kratos dynamometer were used. Statistical analysis was performed using the repeated measures test (SPSS 17.0). Results: A decrease in electromyographic activity during the rest, lateral and protrusion movements and increase of the maximal incisive and molar bite force after 15 months with a mandibular implant overdenture was observed. Conclusion: All the patients in this study reported a considerable improvement in the masticatory function and prostheses stability following treatment. It is possible to propose that the use of mandibular implants overdenture should become the selected treatment for totally edentulous patients to facilitate oral function and quality of life.

Sistema de custos e informa????es gerenciais do Banco Central do Brasil

O Banco Central do Brasil desenvolveu e implantou, no per??odo de abril de 2002 a mar??o de 2003, Sistema de Custos e Informa????es Gerenciais, utilizando o m??todo de custeio baseado em atividades - Activity Based Costing (ABC), destinado a apurar os custos das atividades, dos projetos, dos processos e dos produtos e servi??os ofertados pela Institui????o, distribu??dos pela sua estrutura organizacional. O sistema, mais do que um enfoque voltado para o simples controle e redu????o de custos, constitui-se em significativo instrumento de apoio gerencial, ao propiciar a utiliza????o mais racional de todos os recursos consumidos. Ademais, apresenta-se como iniciativa pioneira vez que, pelo que se tem not??cia, inexistem experi??ncias semelhantes em organiza????es com este porte e com a amplitude adotada neste caso, tanto no ??mbito governamental brasileiro, quanto no que se refere aos demais bancos centrais espalhados pelo mundo

Ger??ncia de recursos humanos no setor p??blico: li????es da reforma em pa??ses desenvolvidos

Texto que analisa aspectos diversos relativos aos Recursos Humanos do Servi??o P??blico nos pa??ses industrializados, visando contribuir para a solu????o dos dilemas enfrentados pelos pa??ses em desenvolvimento nos seus atuais processos de reforma do Estado.

Implanta????o do sistema integrado de informa????es educacionais: SIEd

Tornar o processo decis??rio em pol??ticas educacionais mais ??gil, baseado em informa????o confi??vel, atualizada e dispon??vel em tempo real ?? o objetivo maior do projeto de implanta????o do Sistema de Informa????es e Estat??sticas Educacionais - SIED. A experi??ncia do Censo Escolar aqui apresentada aponta para as diversas vantagens de se investir em informatiza????o e em sistemas gerenciais de informa????o: a efici??ncia, a economicidade e a efetividade, ao permitir a focaliza????o de pol??ticas em segmentos educacionais pr??prios

Curso gest??o do conhecimento: teoria e boas pr??ticas

M??dulo 1: O que ?? gest??o do conhecimento na administra????o p??blica? Dado. Informa????o. Conhecimento. Economia do Conhecimento. Administra????o p??blica. GC na administra????o p??blica. Componentes do Modelo de Gest??o do Conhecimento para a Administra????o P??blica Brasileira. Rela????o entre GC e gest??o estrat??gica. Viabilizadores da GC. Processo de GC. Ciclo KDCA. M??dulo 2: Por que gest??o do conhecimento na administra????o p??blica? A import??ncia da GC. Raz??es para implementar GC na administra????o p??blica. Benef??cios da GC para o indiv??duo, equipes, organiza????o e sociedade. M??dulo 3: Pr??ticas de gest??o do conhecimento. Pr??ticas de relacionadas principalmente aos aspectos de gest??o de recursos humanos que facilitam a transfer??ncia, a dissemina????o e o compartilhamento de informa????es e conhecimento. Pr??ticas ligadas primariamente ?? estrutura????o dos processos organizacionais que funcionam como facilitadores da gera????o, reten????o, organiza????o e dissemina????o do conhecimento organizacional. Pr??ticas cujo foco central ?? a base tecnol??gica e funcional que serve de suporte ?? gest??o do conhecimento organizacional, incluindo automa????o da gest??o da informa????o, aplicativos e ferramentas de Tecnologia da Informa????o (TI) para captura, difus??o e colabora????o. M??dulo 4: Como implementar gest??o do conhecimento na administra????o p??blica? Resultados esperados da implementa????o da GC. O papel a ser desempenho pelas ??reas respons??veis por gest??o de pessoas; gest??o da informa????o e documenta????o; gest??o da tecnologia da informa????o e comunica????es; planejamento estrat??gico; gerenciamento de projetos e gest??o de processos na implementa????o da GC na organiza????o. Ciclo Operacional de GC. Principais barreiras e facilitadores ?? implementa????o da GC nas organiza????es p??blicas. Iniciativas de GC. Passos para elaborar e implementar o plano de gest??o do conhecimento. Estudos de caso: Superintend??ncia de Aeronavegabilidade da Ag??ncia Nacional de Avia????o Civil (SAR/ANAC); Empresa Brasileira de Correios e Tel??grafos (ECT); Instituto de Pesquisa Econ??mica Aplicada (Ipea), Escola Nacional de Administra????o P??blica (Enap), Ag??ncia Brasileira de Desenvolvimento Industrial (ABDI); Secretaria Estadual de Planejamento e Gest??o de Minas Gerais (SEPLAG/MG); Pol??cia Civil de Minas Gerais (PCMG); Pol??cia Militar de Minas Gerais (PMMG).