Thoracic wall reconstruction using ultrasound images to model/bend the thoracic prosthesis for correction of pectus excavatum

Pectus excavatum is the most common congenital deformity of the anterior thoracic wall. The surgical correction of such deformity, using Nuss procedure, consists in the placement of a personalized convex prosthesis into sub-sternal position to correct the deformity. The aim of this work is the CT-scan substitution by ultrasound imaging for the pre-operative diagnosis and pre-modeling of the prosthesis, in order to avoid patient radiation exposure. To accomplish this, ultrasound images are acquired along an axial plane, followed by a rigid registration method to obtain the spatial transformation between subsequent images. These images are overlapped to reconstruct an axial plane equivalent to a CT-slice. A phantom was used to conduct preliminary experiments and the achieved results were compared with the corresponding CT-data, showing that the proposed methodology can be capable to create a valid approximation of the anterior thoracic wall, which can be used to model/bend the prosthesis

Collecting system percutaneous access using real-time tracking sensors: first pig model in vivo experience

Purpose: Precise needle puncture of the renal collecting system is an essential but challenging step for successful percutaneous nephrolithotomy. We evaluated the efficiency of a new real-time electromagnetic tracking system for in vivo kidney puncture. Materials and Methods: Six anesthetized female pigs underwent ureterorenoscopy to place a catheter with an electromagnetic tracking sensor into the desired puncture site and ascertain puncture success. A tracked needle with a similar electromagnetic tracking sensor was subsequently navigated into the sensor in the catheter. Four punctures were performed by each of 2 surgeons in each pig, including 1 each in the kidney, middle ureter, and right and left sides. Outcome measurements were the number of attempts and the time needed to evaluate the virtual trajectory and perform percutaneous puncture. Results: A total of 24 punctures were easily performed without complication. Surgeons required more time to evaluate the trajectory during ureteral than kidney puncture (median 15 seconds, range 14 to 18 vs 13, range 11 to 16, p ¼ 0.1). Median renal and ureteral puncture time was 19 (range 14 to 45) and 51 seconds (range 45 to 67), respectively (p ¼ 0.003). Two attempts were needed to achieve a successful ureteral puncture. The technique requires the presence of a renal stone for testing. Conclusions: The proposed electromagnetic tracking solution for renal collecting system puncture proved to be highly accurate, simple and quick. This method might represent a paradigm shift in percutaneous kidney access techniques

«Corruption» and social and economic criminal law: criminology, criminal policy, political science and law&economics - a new idea about criminal liability of legal entities

Abstract: If we think there is a significant number of legal offshore in the globalized world, then there is not even a global consensus about what «corruption» is. The «illegal corruption» in a country may be legal in another. Moreover, the great global corruption is above the law or above democratic States. And not all democratic States are «Rule of Law». Therefore, the solution is global earlier in time and space law, democratic, free and true law. While the human being does not reach a consensus of what «corruption» really is, the discussion will not go further than a caricature. One of the other problems about «corruption» is that it is very difficult to establish the imputation of crimes, including «corruption» (v.g. Portugal) on some «companies», corporations. We have a juridical problem in the composition of the art. 11. of the Portuguese Penal Code.

A creative solution for rapid and inexpensive model-making in product design processes

Rapid prototyping (RP) is an approach for automatically building a physical object through solid freeform fabrication. Nowadays, RP has become a vital aspect of most product development processes, due to the significant competitive advantages it offers compared to traditional manual model making. Even in academic environments, it is important to be able to quickly create accurate physical representations of concept solutions. Some of these can be used for simple visual validation, while others can be employed for ergonomic assessment by potential users or even for physical testing. However, the cost of traditional RP methods prevents their use in most academic environments on a regular basis, and even for very preliminary prototypes in many small companies. That results in delaying the first physical prototypes to later stages, or creating very rough mock-ups which are not as useful as they could be. In this paper we propose an approach for rapid and inexpensive model-making, which was developed in an academic context, and which can be employed for a variety of objects.

A generic model for integration of Quality, Environment and Safety Management Systems

Purpose – The purpose of this paper is to propose a generic model of Integrated Management System of Quality, Environment and Safety (IMS-QES) that can be adapted and progressively to assimilate various Management Systems, of which highlights: ISO 9001 for Quality; ISO 14001 for Environment; OHSAS 18001 for Occupational Health and Safety. Design/methodology/approach – The model was designed in the real environment of a Portuguese Organization and 160 employees were surveyed. The rate response was equal to 86 percent. The conceived model was implemented in a first phase for the integration of Quality, Environment and Safety Management Systems. Findings – Among the main findings of the survey the paper highlights: the elimination of conflicts between individual systems with resources optimization; creation of added value to the business by eliminating several types of wastes; the integrated management of sustainability components in a global market; the improvement of partnerships with suppliers of goods and services; reducing the number of internal and external audits. Originality/value – This case study is one of the first Portuguese empirical researches about IMS-QES and the paper believes that it can be useful in the creation of a Portuguese guideline for integration, namely the Quality Management Systems; Environmental Management Systems and Occupational Health and Safety Management Systems among others.

Profiling consumer behaviour in cross-border tourism destinations

Tourism is a phenomenon that moves millions of people around the world, taking as a major driver of the global economy. Such relevance is reflected in the proliferation of studies in the overall area known as tourism, under various perspectives and backgrounds. In the light of such multitude of insights our study aims at gaining a deeper understanding of customer profiling and behavior in cross-border tourism destinations. Previous studies conducted in such contexts suggest that cross-border regions (CBRs) are an attractive and desirable idea, yet requiring further theoretical and empirical research. The new configuration of many CBRs calls for a debate on issues concerning its development, raising up important dimensions, such as, organization and planning of common tourism destinations. There is still a gap in the understanding of destination management in CBRs and the customer profile and motivations. Overall this research aims at attaining a deeper understanding of the profile and behavior of consumers in tourism settings, addressing the predisposition for the destination. The study addresses the following research question: “What factors influence customer behavior and attitudes in a CBRs tourism destination?” To address our question we will take an interdisciplinary perspective bringing together inputs from marketing, tourism and local economics. When addressing consumer behavior in tourism previous studies considered the following constructs: involvement, place attachment, satisfaction and destination loyalty. In order to establish the causal relationships in our theoretical model, we intend to develop a predominant quantitative design, yet we plan to conduct exploratory interviews. In the analysis and discussion of results, we intend to use Structural Equation Modeling. It will further allow understanding how the constructs in the research model relate to each other in the specified context. Results are also expected to have managerial implications. Consequently our results may assist decision makers in developing their local policies.

Destinos turísticos transfronteiriços: uma abordagem ao consumidor

Tourism activities are among the most relevant drivers for economical growth and development in various economies. Every year, competition increases tourist destinations (Farhangmehr & Simões, 1999), making it an increasingly complex and geographically diverse range of activities (Pearce, 1991).Such relevance is reflected in the proliferation of studies in the overall area known as tourism, under various perspectives and backgrounds. Previous studies conducted in such contexts suggest that cross-border regions are an attractive and desirable idea, yet requiring further theoretical and empirical research (Studzieniecki & Mazurek, 2007). The new configuration of many cross-border regions calls for a debate on issues concerning its development, raising up important dimensions, such as, organization and planning of common tourism destinations. In particular, there is still a gap in the understanding of destination management in cross-border regions and the customer profile and motivations. Overall this research aims at attaining a deeper understanding of the profile and behavior of consumers in tourism settings, addressing the predisposition for the destination. To address our question we will take an interdisciplinary perspective bringing together inputs from areas, such as, marketing, tourism and local/regional economics. We developed a theoretical model entailing the following constructs: involvement, place attachment, destination satisfaction and loyalty. We then establish potential the relationships among these variables. We suggest that involvement has a positive and direct effect in the two dimensions of place attachment, as well as indirectly, through the construct of satisfaction. Additionally, satisfaction has a direct effect on destination loyalty. Implications for future research are presented.

Consumer behavior and profile in cross border tourism destinations

Tourism is a phenomenon that moves millions of people around the world, taking as a major driver of the global economy. Such relevance is reflected in the proliferation of studies in the overall area known as tourism, under various perspectives and backgrounds. In the light of such multitude of insights our study aims at gaining a deeper understanding of customer profiling and behavior in cross-border tourism destinations. Previous studies conducted in such contexts suggest that cross-border regions (CBRs) are an attractive and desirable idea, yet requiring further theoretical and empirical research. The new configuration of many CBRs calls for a debate on issues concerning its development, raising up important dimensions, such as, organization and planning of common tourism destinations. There is still a gap in the understanding of destination management in CBRs and the customer profile and motivations. Overall this research aims at attaining a deeper understanding of the profile and behavior of consumers in tourism settings, addressing the predisposition for the destination. The study addresses the following research question: “What factors influence customer behavior and attitudes in a CBRs tourism destination?” To address our question we will take an interdisciplinary perspective bringing together inputs from marketing, tourism and local economics. When addressing consumer behavior in tourism previous studies considered the following constructs: involvement, place attachment, satisfaction and destination loyalty. In order to establish the causal relationships in our theoretical model, we intend to develop a predominant quantitative design, yet we plan to conduct exploratory interviews. In the analysis and discussion of results, we intend to use Structural Equation Modeling. It will further allow understanding how the constructs in the research model relate to each other in the specified context. Results are also expected to have managerial implications. Consequently our results may assist decision makers in developing their local policies.

Towards a model for the measurement of data quality in websites

Websites are, nowadays, the face of institutions, but they are often neglected, especially when it comes to contents. In the present paper, we put forth an investigation work whose final goal is the development of a model for the measurement of data quality in institutional websites for health units. To that end, we have carried out a bibliographic review of the available approaches for the evaluation of website content quality, in order to identify the most recurrent dimensions and the attributes, and we are currently carrying out a Delphi Method process, presently in its second stage, with the purpose of reaching an adequate set of attributes for the measurement of content quality.

A model for the evaluation of data quality in health unit website

This article presents a research work, the goal of which was to achieve a model for the evaluation of data quality in institutional websites of health units in a broad and balanced way. We have carried out a literature review of the available approaches for the evaluation of website content quality, in order to identify the most recurrent dimensions and the attributes, and we have also carried out a Delphi method process with experts in order to reach an adequate set of attributes and their respective weights for the measurement of content quality. The results obtained revealed a high level of consensus among the experts who participated in the Delphi process. On the other hand, the different statistical analysis and techniques implemented are robust and attach confidence to our results and consequent model obtained.

Collecting system percutaneous access using real-time tracking sensors: first pig model in vivo experience

Purpose: Precise needle puncture of the renal collecting system is an essential but challenging step for successful percutaneous nephrolithotomy. We evaluated the efficiency of a new real-time electromagnetic tracking system for in vivo kidney puncture. Materials and Methods: Six anesthetized female pigs underwent ureterorenoscopy to place a catheter with an electromagnetic tracking sensor into the desired puncture site and ascertain puncture success. A tracked needle with a similar electromagnetic tracking sensor was subsequently navigated into the sensor in the catheter. Four punctures were performed by each of 2 surgeons in each pig, including 1 each in the kidney, middle ureter, and right and left sides. Outcome measurements were the number of attempts and the time needed to evaluate the virtual trajectory and perform percutaneous puncture. Results: A total of 24 punctures were easily performed without complication. Surgeons required more time to evaluate the trajectory during ureteral than kidney puncture (median 15 seconds, range 14 to 18 vs 13, range 11 to 16, p ¼ 0.1). Median renal and ureteral puncture time was 19 (range 14 to 45) and 51 seconds (range 45 to 67), respectively (p ¼ 0.003). Two attempts were needed to achieve a successful ureteral puncture. The technique requires the presence of a renal stone for testing. Conclusions: The proposed electromagnetic tracking solution for renal collecting system puncture proved to be highly accurate, simple and quick. This method might represent a paradigm shift in percutaneous kidney access techniques.

Survival Analysis Employed in Predicting Corporate Failure: A Forecasting Model Proposal

In face of the current economic and financial environment, predicting corporate bankruptcy is arguably a phenomenon of increasing interest to investors, creditors, borrowing firms, and governments alike. Within the strand of literature focused on bankruptcy forecasting we can find diverse types of research employing a wide variety of techniques, but only a few researchers have used survival analysis for the examination of this issue. We propose a model for the prediction of corporate bankruptcy based on survival analysis, a technique which stands on its own merits. In this research, the hazard rate is the probability of ‘‘bankruptcy’’ as of time t, conditional upon having survived until time t. Many hazard models are applied in a context where the running of time naturally affects the hazard rate. The model employed in this paper uses the time of survival or the hazard risk as dependent variable, considering the unsuccessful companies as censured observations.

IDEA MANAGEMENT SYSTEM - AN ESSENTIAL COMPONENT IN THE CONTINUOUS IMPROVEMENT OF QUALITY AND INNOVATION

It is known the power of ideas is tremendous. But there are employees in many companies who have good ideas but not put them into practice. On the other hand, there are many others who have good ideas and are encouraged to contribute their ideas for innovation in the company. This study attempts to identify factors that contribute to success in managing ideas and consequent business innovation. The method used was the case study applied to two companies. During the investigation, factors considered essential for the success of an idea management program were identified, of which we highlight, among others, evidences the results, involvement of the top management, establishment of goals and objectives; recognition; dissemination of good results. Companies with these implemented systems, capture the best ideas from their collaborators and apply them internally. This study intends to contribute to business innovation in enterprises through creation and idea management, mainly through collecting the best ideas of their own employees. The results of this study can be used to help improving deployed suggestions systems, as well as, all managers who wish to implement suggestions systems/ideas management systems.