Electromagnetic Shielding Properties of Nano Carbon Filled Silicone Rubber Composites

Electromagnetic shielding has become important for various electrical systems because of the electromagnetic pollution caused by the large scale use of electronic devices operating at different frequencies and power levels. Traditionally used metallic shields lack flexibility and hence may not be the right choice for certain applications. In such situations, filled polymer composites provide a good alternative for electromagnetic shielding applications. Being polymer based, they are easy to manufacture and can be molded into the required geometry and shape. In this study, the shielding properties of multiwalled carbon nanotubes and carbon nanofibers filled silicone rubber are studied. The conductivity and the shielding effectiveness of the composites were measured at different filler loadings. Both the fillers are able to make the base polymer conducting even at very low filler loadings. The conductivity and the shielding effectiveness improved when the filler loading was above the percolation threshold.

Mechanically tunable conjugated polymer distributed feedback lasers

Herein we report a low-threshold organic laser device based on semiconducting poly(9, 9′ -dioctylfluoren-2,7-diyl-alt-benzothiadiazole) (F8BT) encapsulated in a mechanically stretchable polydimethylsiloxane (PDMS) matrix. We take advantage of the natural flexibility of PDMS to alter the periodicity of the distributed feedback grating which in turn tunes the gain wavelength at which the resonant feedback is obtained. This way, we demonstrate that low-threshold lasing [6.1 μJ cm-2 (5.3 nJ)] is maintained over a large stretching range of 0%-7% which translates into a tuning range of about 20 nm. © 2010 American Institute of Physics.

High quality assembly of phase-only liquid crystal on silicon ((LCOS) devices

Liquid crystal on silicon (LCOS) for phase-only holography is ideally made to better optical tolerance than that for conventional amplitude modulating applications. Die-level assembly is suited to custom devices and pre-production prototypes because of its flexibility and efficiency in conserving the silicon backplane. Combined with automated assembly, it will allow high reproducibility and fast turnaround time, paving the way for pre-production testing and customer sampling before mass production. Pre-assembly optical testing is the key element in the process. By taking into account the flatness of both the backplane and the front glass plate, we have assembled high quality LCOS devices. We have reached our aim of less than one quarter wavelength phase distortion across the active area. © 2011 IEEE.

Desempleo y políticas del mercado laboral. Análisis internacional de políticas públicas : algunos casos exitosos

Resumen: En los últimos quince años, mientras la mayoría de los países del mundo sufrieron un aumento o estabilidad en el nivel de desempleo, algunos países han logrado mejorar significativamente su situación. Este trabajo lleva a cabo una revisión de la literatura con respecto a las políticas de empleo y del mercado laboral de esos países con el objetivo de extraer algunas lecciones de estas ‘buenas prácticas’. Cabe aclarar que el objetivo no consiste en recomendar políticas específicas para Argentina sino simplemente destacar la relevancia de algunas características comunes que presentan estos casos exitosos. Los países exitosos, además de experimentar una buena performance en términos de crecimiento económico, implementaron un conjunto de políticas que van desde políticas del mercado laboral activas a un amplio sistema de seguridad social, mayor flexibilidad laboral y políticas salariales moderadas.

Analysis of the legislative framework in the Brazilian policymaking process

Analisa os aspectos da estrutura política brasileira que contribuem para falhas nos processos decisórios e ineficácia nos resultados finais de políticas de governo, com ênfase nos problemas institucionais do poder legislativo. Aborda os seguintes tópicos: fragmentação do sistema partidário, infidelidade partidária, modelo de federalismo, preenchimento de cargos públicos, larga utilização de medidas provisórias, disfunções do processo legislativo.

基于柔度修正的局部刚体化结构动力模型简化方法

提出一种基于柔度修正的局部刚体化结构动力模型简化方法.以复杂工程结构的有限元模型为基础,根据运动同步性假设将结构分成若干同步性区域,对每个区域引入准刚体模态,实现对结构的简化.同时对简化方法进行误差分析,利用柔度修正的思路实现对简化变化矩阵的修正,得到更精确的简化结果.以海洋平台结构作为算例应用该方法,得到了比较满意的简化结果.

El outsourcing y su influencia en los objetivos de la estrategia de operaciones. Una aplicación empírica

[ES] El outsourcing de servicios permite mejorar los recursos y capacidades de la empresa, al obtener una mejor calidad de los servicios externalizados y un mejor resultado, ya que permite a la empresa centrarse en lo que realmente sabe hacer. Este artículo trata de ver las percepciones que tienen los directivos del sector hotelero acerca de la influencia que puede tener la externalización en la estrategia de operaciones y concretamente en los objetivos de operaciones relacionados con la reducción del coste, la mejora de la calidad, el aumento de la flexibilidad y el aumento del servicio. El estudio demuestra que los directivos consideran que la externalización tiene un gran potencial al presentar una influencia no sólo en la reducción del coste, sino también en los otros objetivos de la estrategia de operaciones, dando así un carácter más estratégico a la externalización.

Análisis de la flexibilidad de la oferta de formación en gestión del País Vasco

El contenido de este trabajo deriva del proyecto de investigación UE-1998-23, «Oferta y Demanda de Formación en Gestión Empresarial para Directivos en la CAPV» y del contrato de investigación «Análisis de la Oferta de Formación en Gestión y en Gestión del Conocimiento». El proyecto era perteneciente a la convocatoria de 1998 de ayudas del Gobierno Vasco a Proyectos de Investigación e Innovacion Tecnológica entre Universidades y Empresas, en su elaboración y desarrollo participaron la Universidad del País Vasco-Euskal Herriko Unibertsitatea, la Universidad de Deusto (ESTE) y el Cluster del Conocimiento, como empresa.

Dinámica de las Redes Virtuales de Fabricación Global en la Industria Aeronáutica

[ES] Las redes virtuales de fabricación global (RVFGs) están formadas por empresas independientes las cuales establecen entre sí relaciones de tipo horizontal y vertical, pudiendo incluso ser competidores, donde no es necesario mantener internamente grandes recursos fabriles sino gestionar y compartir eficientemente los recursos de la red.

Fishing effort validation and substitution possibilities among components: the case study of the VIII division European anchovy fishery

Command and control regulation programs, particularly input constraints, typically fail to achieve stated objectives, because fishermen may substitute unregulated for regulated inputs. It is, thus, essential to have an understanding of the internal structure of production technology. A primal formulation is used to estimate a translog production function at the vessels level that includes fishing effort and fisherman’s skill. The flexibility of the selected functional permits the analysis of the substitution possibilities among inputs by estimating the elasticity of substitution with no prior constraints. Particular attention is paid to the empirical validation of fishing effort as an aggregate input, which implies either, the acceptation of the joint hypothesis that inputs making up effort are weakly separable from the inputs out of the subgroup or considering that effort is an intermediate input produced by a non-separable two stage technology. Cross sectional data from the Spanish purse seine fleet operating in the VIII Division European anchovy fishery provide evidence of limited input substitution possibilities among the inputs making up the empirically validated fishing effort translog micro-production function.

2002-03 Florida Keys National Marine Sanctuary science report: An ecosystem report card after five years of marine zoning

Executive Summary: Circulation and Exchange of Florida Bay and South Florida Coastal Waters The coastal ecosystem of South Florida is comprised of distinct marine environments. Circulation of surface waters and exchange processes, which respond to both local and regional forcings, interconnect different coastal environments. In addition, re-circulating current systems within the South Florida coastal ecosystem such as the Tortugas Gyre contribute to retention of locally spawned larvae. Variability in salinity, chlorophyll, and light transmittance occurs on a wide range of temporal and spatial scales, in response to both natural forcing, such as seasonal precipitation and evaporation and interannual “El Niño” climate signals, and anthropogenic forcing, such as water management practices in south Florida. The full time series of surface property maps are posted at www.aoml.noaa.gov/sfp. Regional surface circulation patterns, shown by satellite-tracked surface drifters, respond to large-scale forcing such as wind variability and sea level slopes. Recent patterns include slow flow from near the mouth of the Shark River to the Lower Keys, rapid flow from the Tortugas to the shelf of the Carolinas, and flow from the Tortugas around the Tortugas Gyre and out of the Florida Straits. The Southwest Florida Shelf and the Atlantic side of the Florida Keys coastal zone are directly connected by passages between the islands of the Middle and Lower Keys. Movement of water between these regions depends on a combination of local wind-forced currents and gravitydriven transports through the passages, produced by cross-Key sea level differences on time scales of several days to weeks, which arise because of differences in physical characteristics (shape, orientation, and depth) of the shelf on either side of the Keys. A southeastward mean flow transports water from western Florida Bay, which undergoes large variations in water quality, to the reef tract. Adequate sampling of oceanographic events requires both the capability of near real-time recognition of these events, and the flexibility to rapidly stage targeted field sampling. Capacity to respond to events is increasing, as demonstrated by investigations of the 2002 “blackwater” event and a 2003 entrainment of Mississippi River water to the Tortugas. (PDF contains 364 pages.)

Developing alternatives for optimal representation of seafloor habitats and associated communities in Stellwagen Bank National Marine Sanctuary

The implementation of various types of marine protected areas is one of several management tools available for conserving representative examples of the biological diversity within marine ecosystems in general and National Marine Sanctuaries in particular. However, deciding where and how many sites to establish within a given area is frequently hampered by incomplete knowledge of the distribution of organisms and an understanding of the potential tradeoffs that would allow planners to address frequently competing interests in an objective manner. Fortunately, this is beginning to change. Recent studies on the continental shelf of the northeastern United States suggest that substrate and water mass characteristics are highly correlated with the composition of benthic communities and may therefore, serve as proxies for the distribution of biological biodiversity. A detailed geo-referenced interpretative map of major sediment types within Stellwagen Bank National Marine Sanctuary (SBNMS) has recently been developed, and computer-aided decision support tools have reached new levels of sophistication. We demonstrate the use of simulated annealing, a type of mathematical optimization, to identify suites of potential conservation sites within SBNMS that equally represent 1) all major sediment types and 2) derived habitat types based on both sediment and depth in the smallest amount of space. The Sanctuary was divided into 3610 0.5 min2 sampling units. Simulations incorporated constraints on the physical dispersion of sampling units to varying degrees such that solutions included between one and four site clusters. Target representation goals were set at 5, 10, 15, 20, and 25 percent of each sediment type, and 10 and 20 percent of each habitat type. Simulations consisted of 100 runs, from which we identified the best solution (i.e., smallest total area) and four nearoptimal alternates. We also plotted total instances in which each sampling unit occurred in solution sets of the 100 runs as a means of gauging the variety of spatial configurations available under each scenario. Results suggested that the total combined area needed to represent each of the sediment types in equal proportions was equal to the percent representation level sought. Slightly larger areas were required to represent all habitat types at the same representation levels. Total boundary length increased in direct proportion to the number of sites at all levels of representation for simulations involving sediment and habitat classes, but increased more rapidly with number of sites at higher representation levels. There were a large number of alternate spatial configurations at all representation levels, although generally fewer among one and two versus three- and four-site solutions. These differences were less pronounced among simulations targeting habitat representation, suggesting that a similar degree of flexibility is inherent in the spatial arrangement of potential protected area systems containing one versus several sites for similar levels of habitat representation. We attribute these results to the distribution of sediment and depth zones within the Sanctuary, and to the fact that even levels of representation were sought in each scenario. (PDF contains 33 pages.)

The part-time phenomenon:evidence from the UK and the EU

When, in the early 1990s, the European Commission began to promote part-time working as an important strategy for job creation and enhancing labour market flexibility, this mode of working already accounted for a large and growing share of total employment in the EU.

Control of gene expression by modulated self-assembly

Numerous transcription factors self-assemble into different order oligomeric species in a way that is actively regulated by the cell. Until now, no general functional role has been identified for this widespread process. Here, we capture the effects of modulated self-assembly in gene expression with a novel quantitative framework. We show that this mechanism provides precision and flexibility, two seemingly antagonistic properties, to the sensing of diverse cellular signals by systems that share common elements present in transcription factors like p53, NF-kappa B, STATs, Oct and RXR. Applied to the nuclear hormone receptor RXR, this framework accurately reproduces a broad range of classical, previously unexplained, sets of gene expression data and corroborates the existence of a precise functional regime with flexible properties that can be controlled both at a genome-wide scale and at the individual promoter level.

The Economics of Gasification: A Market-Based Approach

This paper deals with the economics of gasification facilities in general and IGCC power plants in particular. Regarding the prospects of these systems, passing the technological test is one thing, passing the economic test can be quite another. In this respect, traditional valuations assume constant input and/or output prices. Since this is hardly realistic, we allow for uncertainty in prices. We naturally look at the markets where many of the products involved are regularly traded. Futures markets on commodities are particularly useful for valuing uncertain future cash flows. Thus, revenues and variable costs can be assessed by means of sound financial concepts and actual market data. On the other hand, these complex systems provide a number of flexibility options (e.g., to choose among several inputs, outputs, modes of operation, etc.). Typically, flexibility contributes significantly to the overall value of real assets. Indeed, maximization of the asset value requires the optimal exercise of any flexibility option available. Yet the economic value of flexibility is elusive, the more so under (price) uncertainty. And the right choice of input fuels and/or output products is a main concern for the facility managers. As a particular application, we deal with the valuation of input flexibility. We follow the Real Options approach. In addition to economic variables, we also address technical and environmental issues such as energy efficiency, utility performance characteristics and emissions (note that carbon constraints are looming). Lastly, a brief introduction to some stochastic processes suitable for valuation purposes is provided.