Porous polyurethane coatings bonded onto surface-modified titanium substrates for the growth of an endothelial cell layer

Cardiovascular diseases refer to the class of diseases that involve the heart or blood vessels (arteries and veins). Examples of medical devices for treating the cardiovascular diseases include ventricular assist devices (VADs), artificial heart valves and stents. Metallic biomaterials such as titanium and its alloy are commonly used for ventricular assist devices. However, titanium and its alloy show unacceptable thrombosis, which represents a major obstacle to be overcome. Polyurethane (PU) polymer has better blood compatibility and has been used widely in cardiovascular devices. Thus one aim of the project was to coat a PU polymer onto a titanium substrate by increasing the surface roughness, and surface functionality. Since the endothelium of a blood vessel has the most ideal non-thrombogenic properties, it was the target of this research project to grow an endothelial cell layer as a biological coating based on the tissue engineering strategy. However, seeding endothelial cells on the smooth PU coating surfaces is problematic due to the quick loss of seeded cells which do not adhere to the PU surface. Thus it was another aim of the project to create a porous PU top layer on the dense PU pre-layer-coated titanium substrate. The method of preparing the porous PU layer was based on the solvent casting/particulate leaching (SCPL) modified with centrifugation. Without the step of centrifugation, the distribution of the salt particles was not uniform within the polymer solution, and the degree of interconnection between the salt particles was not well controlled. Using the centrifugal treatment, the pore distribution became uniform and the pore interconnectivity was improved even at a high polymer solution concentration (20%) as the maximal salt weight was added in the polymer solution. The titanium surfaces were modified by alkli and heat treatment, followed by functionlisation using hydrogen peroxide. A silane coupling agent was coated before the application of the dense PU pre-layer and the porous PU top layer. The ability of the porous top layer to grow and retain the endothelial cells was also assessed through cell culture techniques. The bonding strengths of the PU coatings to the modified titanium substrates were measured and related to the surface morphologies. The outcome of the project is that it has laid a foundation to achieve the strategy of endothelialisation for the blood compatibility of medical devices. This thesis is divided into seven chapters. Chapter 2 describes the current state of the art in the field of surface modification in cardiovascular devices such as ventricular assist devices (VADs). It also analyses the pros and cons of the existing coatings, particularly in the context of this research. The surface coatings for VADs have evolved from early organic/ inorganic (passive) coatings, to bioactive coatings (e.g. biomolecules), and to cell-based coatings. Based on the commercial applications and the potential of the coatings, the relevant review is focused on the following six types of coatings: (1) titanium nitride (TiN) coatings, (2) diamond-like carbon (DLC) coatings, (3) 2-methacryloyloxyethyl phosphorylcholine (MPC) polymer coatings, (4) heparin coatings, (5) textured surfaces, and (6) endothelial cell lining. Chapter 3 reviews the polymer scaffolds and one relevant fabrication method. In tissue engineering, the function of a polymeric material is to provide a 3-dimensional architecture (scaffold) which is typically used to accommodate transplanted cells and to guide their growth and the regeneration of tissue. The success of these systems is dependent on the design of the tissue engineering scaffolds. Chapter 4 describes chemical surface treatments for titanium and titanium alloys to increase the bond strength to polymer by altering the substrate surface, for example, by increasing surface roughness or changing surface chemistry. The nature of the surface treatment prior to bonding is found to be a major factor controlling the bonding strength. By increasing surface roughness, an increase in surface area occurs, which allows the adhesive to flow in and around the irregularities on the surface to form a mechanical bond. Changing surface chemistry also results in the formation of a chemical bond. Chapter 5 shows that bond strengths between titanium and polyurethane could be significantly improved by surface treating the titanium prior to bonding. Alkaline heat treatment and H2O2 treatment were applied to change the surface roughness and the surface chemistry of titanium. Surface treatment increases the bond strength by altering the substrate surface in a number of ways, including increasing the surface roughness and changing the surface chemistry. Chapter 6 deals with the characterization of the polyurethane scaffolds, which were fabricated using an enhanced solvent casting/particulate (salt) leaching (SCPL) method developed for preparing three-dimensional porous scaffolds for cardiac tissue engineering. The enhanced method involves the combination of a conventional SCPL method and a step of centrifugation, with the centrifugation being employed to improve the pore uniformity and interconnectivity of the scaffolds. It is shown that the enhanced SCPL method and a collagen coating resulted in a spatially uniform distribution of cells throughout the collagen-coated PU scaffolds.In Chapter 7, the enhanced SCPL method is used to form porous features on the polyurethane-coated titanium substrate. The cavities anchored the endothelial cells to remain on the blood contacting surfaces. It is shown that the surface porosities created by the enhanced SCPL may be useful in forming a stable endothelial layer upon the blood contacting surface. Chapter 8 finally summarises the entire work performed on the fabrication and analysis of the polymer-Ti bonding, the enhanced SCPL method and the PU microporous surface on the metallic substrate. It then outlines the possibilities for future work and research in this area.

Listening to late discovery adoption and donor offspring stories : adoption, ethics and implications for contemporary donor insemination practices

For most of the 20th Century a ‘closed’ system of adoption was practised throughout Australia and other modern Western societies. This ‘closed’ system was characterised by sealed records; amended birth certificates to conceal the adoption, and prohibited contact with all biological family. Despite claims that these measures protected these children from the taint of illegitimacy the central motivations were far more complex, involving a desire to protect couples from the stigma of infertility and to provide a socially acceptable family structure (Triseliotis, Feast, & Kyle, 2005; Marshall & McDonald, 2001). From the 1960s significant evidence began to emerge that many adopted children and adults were experiencing higher incidences of psychological difficulties, characterised by problems with psychological adjustment, building self-esteem and forming a secure personal identity. These difficulties became grouped under the term ‘genealogical bewilderment’. As a result, new policies and practices were introduced to try to place the best interests of the child at the forefront. These changes reflected new understandings of adoption; as not only an individual process but also as a social and relational process that continues throughout life. Secrecy and the withholding of birth information are now prohibited in the overwhelming majority of all domestic adoptions processed in Australia (Marshall & McDonald, 2001). One little known consequence of this ‘closed’ system of adoption was the significant number of children who were never told of their adoptive status. As a consequence, some have discovered or had this information disclosed to them, as adults. The first study that looked at the late discovery of genetic origins experiences was conducted by the Post Adoption Resource Centre in New South Wales in 1999. This report found that the participants in their study expressed feelings of disbelief, confusion, anger, sorrow and loss. Further, the majority of participants continued to struggle with issues arising from this intentional concealment of their genetic origins (Perl & Markham, 1999). A second and more recent study (Passmore, Feeney & Foulstone, 2007) looked at the issue of secrecy in adoptive families as part of a broader study of 144 adult adoptees. This study found that secrecy and/or lies or misinformation on the part of adoptive parents had negative effects on both personal identity and relationships with others. The authors noted that those adoptees who found out about their adoption as adults were ‘especially likely to feel a sense of betrayal’ (p.4). Over recent years, stories of secrecy and late discovery have also started to emerge from sperm donor conceived adults (Spencer, 2007; Turner & Coyle, 2000). Current research evidence shows that although a majority of couples during the donor assisted conception process indicate that they intend to tell the offspring about their origins, as many as two-thirds or more of couples continue to withhold this information from their children (Akker, 2006; Gottlieb, A. McWhinnie, 2001; Salter-Ling, Hunter, & Glover, 2001). Why do they keep this secret? Infertility involves a range of complex factors that are often left unresolved or poorly understood by those choosing insemination by donor as a form of family building (Schaffer, J. A., & Diamond, R., 1993). These factors may only impact after the child is born, when resemblance talk becomes most pronounced. Resemblance talk is an accepted form of public discourse and a social convention that legitimises the child as part of the family and is part of the process of constructing the child’s identity within the family. Couples tend to become focused on resemblance as this is where they feel most vulnerable, and the lack of resemblance to the parenting father may trigger his sense of loss (Becker, Butler, & Nachtigall, 2005).

Food insecurity in Brisbane : the single mother’s struggle

Using a feminist reflexive approach this paper reports on interviews with single mother’s in the Brisbane area about their experiences with food shopping and household food security. Preliminary findings suggest that most experience significant stress around the amount of money they have available for food. As the price of food and other costs of living increase, the only budget item that is flexible – groceries - is squeezed tighter. All women expressed a reluctance to ask for help from strangers at agencies instead relying on the support of family and friends to keep them food secure. Sometimes family and friends had no spare resources to help or were not aware of the extent their friend or relative might be struggling. The increased risks of poverty and food insecurity mean many go without as feeding the children takes precedence. The quality of their diets is variable with many reporting on aiming for quantity rather than being concerned with nutritional balance. Exhaustion and stress from being over-committed doing three roles, mother, father and housekeeper was self-identified as a key factor leading to mental health conditions such as depression, burnout and break down. Female single parent households are vulnerable to reducing welfare benefits as children grow or child support changes. Current policy forces single parents out to work but many can only manage part-time work for lower wages and are barely able to cope with this extra burden often resenting the reduction in benefits it brings. Public perceptions, derision and the notions of choice surrounding single parenting leave the cohort divided and silent for fear of reprisals. In my investigation issues arise about welfare policy that keep benefits low and workplace patriarchal power that can contribute to systemic poverty and the widening of the gender gap in poverty. So far analysis suggests a better support system around community food security including some hands on home help services, nutritional information, cooking classes, community gardening and other social capital building activities are needed for these women in order to avoid long-term health problems and help them better care for the next generation.

Improving automatic speaker verification using SVM techniques

Automatic recognition of people is an active field of research with important forensic and security applications. In these applications, it is not always possible for the subject to be in close proximity to the system. Voice represents a human behavioural trait which can be used to recognise people in such situations. Automatic Speaker Verification (ASV) is the process of verifying a persons identity through the analysis of their speech and enables recognition of a subject at a distance over a telephone channel { wired or wireless. A significant amount of research has focussed on the application of Gaussian mixture model (GMM) techniques to speaker verification systems providing state-of-the-art performance. GMM's are a type of generative classifier trained to model the probability distribution of the features used to represent a speaker. Recently introduced to the field of ASV research is the support vector machine (SVM). An SVM is a discriminative classifier requiring examples from both positive and negative classes to train a speaker model. The SVM is based on margin maximisation whereby a hyperplane attempts to separate classes in a high dimensional space. SVMs applied to the task of speaker verification have shown high potential, particularly when used to complement current GMM-based techniques in hybrid systems. This work aims to improve the performance of ASV systems using novel and innovative SVM-based techniques. Research was divided into three main themes: session variability compensation for SVMs; unsupervised model adaptation; and impostor dataset selection. The first theme investigated the differences between the GMM and SVM domains for the modelling of session variability | an aspect crucial for robust speaker verification. Techniques developed to improve the robustness of GMMbased classification were shown to bring about similar benefits to discriminative SVM classification through their integration in the hybrid GMM mean supervector SVM classifier. Further, the domains for the modelling of session variation were contrasted to find a number of common factors, however, the SVM-domain consistently provided marginally better session variation compensation. Minimal complementary information was found between the techniques due to the similarities in how they achieved their objectives. The second theme saw the proposal of a novel model for the purpose of session variation compensation in ASV systems. Continuous progressive model adaptation attempts to improve speaker models by retraining them after exploiting all encountered test utterances during normal use of the system. The introduction of the weight-based factor analysis model provided significant performance improvements of over 60% in an unsupervised scenario. SVM-based classification was then integrated into the progressive system providing further benefits in performance over the GMM counterpart. Analysis demonstrated that SVMs also hold several beneficial characteristics to the task of unsupervised model adaptation prompting further research in the area. In pursuing the final theme, an innovative background dataset selection technique was developed. This technique selects the most appropriate subset of examples from a large and diverse set of candidate impostor observations for use as the SVM background by exploiting the SVM training process. This selection was performed on a per-observation basis so as to overcome the shortcoming of the traditional heuristic-based approach to dataset selection. Results demonstrate the approach to provide performance improvements over both the use of the complete candidate dataset and the best heuristically-selected dataset whilst being only a fraction of the size. The refined dataset was also shown to generalise well to unseen corpora and be highly applicable to the selection of impostor cohorts required in alternate techniques for speaker verification.

Mechanisms of change in negative thinking and urinary monoamines in depressed patients during acute treatment with group cognitive behavior therapy and antidepressant medication

This naturalistic study investigated the mechanisms of change in measures of negative thinking and in 24-h urinary metabolites of noradrenaline (norepinephrine), dopamine and serotonin in a sample of 43 depressed hospital patients attending an eight-session group cognitive behavior therapy program. Most participants (91%) were taking antidepressant medication throughout the therapy period according to their treating Psychiatrists' prescriptions. The sample was divided into outcome categories (19 Responders and 24 Non-responders) on the basis of a clinically reliable change index [Jacobson, N.S., & Truax, P., 1991. Clinical significance: a statistical approach to defining meaningful change in psychotherapy research. Journal of Consulting and Clinical Psychology, 59, 12–19.] applied to the Beck Depression Inventory scores at the end of the therapy. Results of repeated measures analysis of variance [ANOVA] analyses of variance indicated that all measures of negative thinking improved significantly during therapy, and significantly more so in the Responders as expected. The treatment had a significant impact on urinary adrenaline and metadrenaline excretion however, these changes occurred in both Responders and Non-responders. Acute treatment did not significantly influence the six other monoamine metabolites. In summary, changes in urinary monoamine levels during combined treatment for depression were not associated with self-reported changes in mood symptoms.

The mystery of polygamy

The economic literature on marriage identifies a number of benefits of marriage and discusses mechanisms that cause societies to prefer certain marital structures such as polygamy or monogamy. In principle, however, these benefits and mechanisms might lead societies towards polyandry and even cenogamy. The rareness of polyandry and the absence of cenogamy, however, clearly indicate that important aspects of marriage are omitted. This paper argues that the reproductive nature of marital arrangements must be taken into account when analyzing the foundations of marriage. Monogamy always achieves efficient parental investments in offspring. For polygamous arrangements this might be often true. It fails, however, in polyandry because paternity cannot be established with certainty. Cenogamy is shown to be an unstable arrangement.

A new definition for today’s Chinese independent cinema

Different terminologies have been used to characterize the Chinese independent cinema in the 1990s. These definitions focus on the experimental practices outside the official production system and independent of official ideology. The film industry has had distinctive development since the entry of WTO in 2001. Private investors have played essential role in cinematic economy; strict censorship has been obviously relaxed; the film industry is being divided into two opposing extremes. Thus, it is necessary to give a new definition of the Chinese independent cinema. The definition of independent cinema in today China I suggest in the light of American independence is that any film that has not been financed, produced and distributed by majors is independent. At least four corporations are majors in the Chinese film industry. They are China Film Group Corporation, Huayi Brothers Corporation, PolyBona Film Distribution Corporation and Shanghai Film Group Corporation. Except the four majors, all the other film production or distribution companies are independents.

Introduction

This is not a book about the perils of global warming and its impact on children, although climate change provides an impetus. Nor is it a response to environmental issues that shifts responsibilities from adults to children, asking them to fix what we leave behind. Instead, it is a book of positive ideas and actions that shows what early childhood educational communities can do when children, teachers and parents work together to address, arguably, one of the most serious issues of our time. It is about what early childhood education – and specifically, early childhood teacher education – can and must do to play its part in helping societies move towards sustainable living. It is about the emerging field of early childhood education for sustainability (ECEfS).

Efficient wireless broadband communications to rural area

This paper discusses how internet services can be brought one step closer to the rural dispersed communities by improving wireless broadband communications in those areas. To accomplish this objective we describe the use of an innovative Multi-User-Single-Antenna for MIMO (MUSA-MIMO) technology using the spectrum currently allocated to analogue TV. MUSA-MIMO technology can be considered as a special case of MIMO technology, which is beneficial when provisioning reliable and high-speed communication channels. This paper describes channel modelling techniques to characterise the MUSA-MIMO system allowing an effective deployment of this technology. Particularly, it describes the development of a novel MUSA MIMO channel model that takes into account temporal variations in the rural wireless environment. This can be considered as a novel approach tailor-maid to rural Australia for provisioning efficient wireless broadband communications.

Defining the public values in airport development decision-making

Residents, businesses, local, state and national government stakeholders all want to have their say when airports expand or develop. While stakeholder engagement is increasingly a strategy employed for managing the tensions attracted to airport development, different stakeholders have different expectations and demands of airports. This requires different approaches to stakeholder engagement. Identifying the public values that are at stake in developing airports provides an initial step towards building a platform for selecting and applying stakeholder engagement strategies in airport and more general infrastructure contexts. -------- This paper uses the existing literature of public values to build a general typology of public values for the stakeholders of airport development. A range of semi-privatised and state owned airport case studies from Europe have been used to demonstrate the universal nature of the identified values. The result is a framework that identifies both the substantive and procedural values, separated into local, state/regional and national levels of interest. The typology provides a generalised view of public values in airport development; however, the public values identified may be limited to more western oriented societies due to the skew of airport cases reviewed. --------- Contributions are made to the literature with a typology of public values derived from existing knowledge and explored using empirical case examples. The provided typology enables research of airport development decision-making to delineate public values both within and between stakeholder groups, and helps to explain the different perspectives that stakeholders have towards airport development. Future research may focus on refining the typology for different types of airport governance structures, such as differences between public values in state and market-led airport development; include more airport cases from eastern societies to draw parallels or differences between western and eastern societies; or utilise the typology as a framework for analysing changes in public values of airports over time.

Panel discussion and documentary screening to celebrate World Industrial Design Day (WIDD) 2010

This collaborative event was organised to coincide with International celebrations by the International Council of Societies of Industrial Design (ICSID). The panel discussion involved industrial designers from a variety of backgrounds including academics, theorists and practitioners. Each panel member was given time to voice their opinion surrounding the theme of WIDD2010 "Industrial Design: Humane Solutions for a Resilient World". The discussion was then extended to the audience through active question and answer time. The panel included: * Professor Vesna Popovic FDIA - Queensland University of Technology * Adam Doyle, Studio Manager - Infinity Design Development * Scott Cox MDIA, Creative Director - Formwerx * Alexander Lotersztain, Director - Derlot * Philip Whiting FDIA, Design Convenor - QCA * Professor Tony Fry, Director Team D/E/S & QCA After this, the documentary by Gary Hewtsit "Objectified" was then screened (75 min).

Music, media and making : humanising digital media in music education

This paper examines three functions of music technology in the study of music. Firstly, as a tool, secondly, as an instrument and, lastly, as a medium for thinking. As our societies become increasingly embroiled in digital media for representation and communication, our philosophies of music education need to adapt to integrate these developments while maintaining the essence of music. The foundation of music technology in the 1990s is the digital representation of sound. It is this fundamental shift to a new medium with which to represent sound that carries with it the challenge to address digital technology and its multiple effects on music creation and presentation. In this paper I suggest that music institutions should take a broad and integrated approach to the place of music technology in their courses, based on the understanding of digital representation of sound and these three functions it can serve. Educators should reconsider digital technologies such as synthesizers and computers as music instruments and cognitive amplifiers, not simply as efficient tools.

United States still no closer to database legislation

Last year European Intellectual Property Review published an article comparing the latest version of the proposed US database legislation, the Collections of Information Antipiracy Bill with the UK's Copyright and Rights in Database Regulations 1997. Subsequently a new US Bill, the Consumer and Investor Access to Information Act has emerged, the Antipiracy Bill has been amended and much debate has occurred, but the US seems no closer to enacting database legislation. This article briefly outlines the background to the US legislative efforts, examines the two Bills and draws some comparisons with the UK Regulations. A study of the US Bills clearly demonstrates the starkly divided opinion on database protection held by the Bills' proponents and the principal lobby groups driving the legislative efforts: the Antipiracy Bill is very protective of database producers' interests, whereas the Access Bill is heavily user-oriented. If the US experience is any indication there will be a long horizon involved in achieving any consensus on international harmonisation of this difficult area.

The Remnant

An Interactive Installation with holographic 3D projections, satellite imagery, surround sound and intuitive body driven interactivity. Remnant (v.1) was commissioned by the 2010 TreeLine ecoArt event - an initiative of the Sunshine Coast Council and presented at a remnant block of subtropical rainforest called ‘Mary Cairncross Scenic Reserve’ - located 100kms north of Brisbane near the township of Maleny. V2 was later commissioned for KickArts Gallery, Cairns, re-presenting the work in a new open format which allowed audiences to both experience the original power of the work and to also understand the construction of the work's powerful illusory, visual spaces. This art-science project focused upon the idea of remnant landscapes - isolated blocks of forest (or other vegetation types) typically set within a patchwork quilt of surrounding farmed land. Participants peer into a mysterious, long tunnel of imagery whilst navigating entirely through gentle head movements - allowing them to both 'steer' in three dimensions and also 'alight', as a butterfly might, upon a sector of landscape - which in turn reveals an underlying 'landscape of mind'. The work challenges audiences to re-imagine our conceptions of country in ways that will lead us to better reconnect and sustain today’s heavily divided landscapes. The research field involved developing new digital image projection methods, alternate embodied interaction and engagement strategies for eco-political media arts practice. The context was the creation of improved embodied and improvisational experiences for participants, further informed by ‘eco-philosophical’ and sustainment theories. By engaging with deep conceptions of connectivity between apparently disparate elements, the work considered novel strategies for fostering new desires, for understanding and re-thinking the requisite physical and ecological links between ‘things’ that have been historically shattered. The methodology was primarily practice-led and in concert with underlying theories. The work’s knowledge contribution was to question how new media interactive experience and embodied interaction might prompt participants to reflect upon appropriate resources and knowledges required to generate this substantive desire for new approaches to sustainment. This accentuated through the power of learning implied by the works' strongly visual and kinaesthetic interface (i.e. the tunnel of imagery and the head and torso operated navigation). The work was commissioned by the 2010 TreeLine ecoArt event - an initiative of the Sunshine Coast Council and the second version was commissioned by Kickarts Gallery, Cairns, specifically funded by a national optometrist chain. It was also funded in development by Arts Queensland and reviewed in Realtime.

A new multilevel converter configuration for high power and high quality applications

The Queensland University of Technology (QUT) allows the presentation of theses for the Degree of Doctor of Philosophy in the format of published or submitted papers, where such papers have been published, accepted or submitted during the period of candidature. This thesis is composed of ten published /submitted papers and book chapters of which nine have been published and one is under review. This project is financially supported by an Australian Research Council (ARC) Discovery Grant with the aim of investigating multilevel topologies for high quality and high power applications, with specific emphasis on renewable energy systems. The rapid evolution of renewable energy within the last several years has resulted in the design of efficient power converters suitable for medium and high-power applications such as wind turbine and photovoltaic (PV) systems. Today, the industrial trend is moving away from heavy and bulky passive components to power converter systems that use more and more semiconductor elements controlled by powerful processor systems. However, it is hard to connect the traditional converters to the high and medium voltage grids, as a single power switch cannot stand at high voltage. For these reasons, a new family of multilevel inverters has appeared as a solution for working with higher voltage levels. Besides this important feature, multilevel converters have the capability to generate stepped waveforms. Consequently, in comparison with conventional two-level inverters, they present lower switching losses, lower voltage stress across loads, lower electromagnetic interference (EMI) and higher quality output waveforms. These properties enable the connection of renewable energy sources directly to the grid without using expensive, bulky, heavy line transformers. Additionally, they minimize the size of the passive filter and increase the durability of electrical devices. However, multilevel converters have only been utilised in very particular applications, mainly due to the structural limitations, high cost and complexity of the multilevel converter system and control. New developments in the fields of power semiconductor switches and processors will favor the multilevel converters for many other fields of application. The main application for the multilevel converter presented in this work is the front-end power converter in renewable energy systems. Diode-clamped and cascade converters are the most common type of multilevel converters widely used in different renewable energy system applications. However, some drawbacks – such as capacitor voltage imbalance, number of components, and complexity of the control system – still exist, and these are investigated in the framework of this thesis. Various simulations using software simulation tools are undertaken and are used to study different cases. The feasibility of the developments is underlined with a series of experimental results. This thesis is divided into two main sections. The first section focuses on solving the capacitor voltage imbalance for a wide range of applications, and on decreasing the complexity of the control strategy on the inverter side. The idea of using sharing switches at the output structure of the DC-DC front-end converters is proposed to balance the series DC link capacitors. A new family of multioutput DC-DC converters is proposed for renewable energy systems connected to the DC link voltage of diode-clamped converters. The main objective of this type of converter is the sharing of the total output voltage into several series voltage levels using sharing switches. This solves the problems associated with capacitor voltage imbalance in diode-clamped multilevel converters. These converters adjust the variable and unregulated DC voltage generated by renewable energy systems (such as PV) to the desirable series multiple voltage levels at the inverter DC side. A multi-output boost (MOB) converter, with one inductor and series output voltage, is presented. This converter is suitable for renewable energy systems based on diode-clamped converters because it boosts the low output voltage and provides the series capacitor at the output side. A simple control strategy using cross voltage control with internal current loop is presented to obtain the desired voltage levels at the output voltage. The proposed topology and control strategy are validated by simulation and hardware results. Using the idea of voltage sharing switches, the circuit structure of different topologies of multi-output DC-DC converters – or multi-output voltage sharing (MOVS) converters – have been proposed. In order to verify the feasibility of this topology and its application, steady state and dynamic analyses have been carried out. Simulation and experiments using the proposed control strategy have verified the mathematical analysis. The second part of this thesis addresses the second problem of multilevel converters: the need to improve their quality with minimum cost and complexity. This is related to utilising asymmetrical multilevel topologies instead of conventional multilevel converters; this can increase the quality of output waveforms with a minimum number of components. It also allows for a reduction in the cost and complexity of systems while maintaining the same output quality, or for an increase in the quality while maintaining the same cost and complexity. Therefore, the asymmetrical configuration for two common types of multilevel converters – diode-clamped and cascade converters – is investigated. Also, as well as addressing the maximisation of the output voltage resolution, some technical issues – such as adjacent switching vectors – should be taken into account in asymmetrical multilevel configurations to keep the total harmonic distortion (THD) and switching losses to a minimum. Thus, the asymmetrical diode-clamped converter is proposed. An appropriate asymmetrical DC link arrangement is presented for four-level diode-clamped converters by keeping adjacent switching vectors. In this way, five-level inverter performance is achieved for the same level of complexity of the four-level inverter. Dealing with the capacitor voltage imbalance problem in asymmetrical diodeclamped converters has inspired the proposal for two different DC-DC topologies with a suitable control strategy. A Triple-Output Boost (TOB) converter and a Boost 3-Output Voltage Sharing (Boost-3OVS) converter connected to the four-level diode-clamped converter are proposed to arrange the proposed asymmetrical DC link for the high modulation indices and unity power factor. Cascade converters have shown their abilities and strengths in medium and high power applications. Using asymmetrical H-bridge inverters, more voltage levels can be generated in output voltage with the same number of components as the symmetrical converters. The concept of cascading multilevel H-bridge cells is used to propose a fifteen-level cascade inverter using a four-level H-bridge symmetrical diode-clamped converter, cascaded with classical two-level Hbridge inverters. A DC voltage ratio of cells is presented to obtain maximum voltage levels on output voltage, with adjacent switching vectors between all possible voltage levels; this can minimize the switching losses. This structure can save five isolated DC sources and twelve switches in comparison to conventional cascade converters with series two-level H bridge inverters. To increase the quality in presented hybrid topology with minimum number of components, a new cascade inverter is verified by cascading an asymmetrical four-level H-bridge diode-clamped inverter. An inverter with nineteen-level performance was achieved. This synthesizes more voltage levels with lower voltage and current THD, rather than using a symmetrical diode-clamped inverter with the same configuration and equivalent number of power components. Two different predictive current control methods for the switching states selection are proposed to minimise either losses or THD of voltage in hybrid converters. High voltage spikes at switching time in experimental results and investigation of a diode-clamped inverter structure raised another problem associated with high-level high voltage multilevel converters. Power switching components with fast switching, combined with hard switched-converters, produce high di/dt during turn off time. Thus, stray inductance of interconnections becomes an important issue and raises overvoltage and EMI issues correlated to the number of components. Planar busbar is a good candidate to reduce interconnection inductance in high power inverters compared with cables. The effect of different transient current loops on busbar physical structure of the high-voltage highlevel diode-clamped converters is highlighted. Design considerations of proper planar busbar are also presented to optimise the overall design of diode-clamped converters.