A bridge-monitoring tool based on bridge and vehicle accelerations

Previous research on damage detection based on the response of a structure to a moving load has reported decay in accuracy with increasing load speed. Using a 3D vehicle – bridge interaction model, this paper shows that the area under the filtered acceleration response of the bridge increases with increasing damage, even at highway load speeds. Once a datum reading is established, the area under subsequent readings can be monitored and compared with the baseline reading, if an increase is observed it may indicate the presence of damage. The sensitivity of the proposed approach to road roughness and noise is tested in several damage scenarios. The possibility of identifying damage in the bridge by analysing the acceleration response of the vehicle traversing it is also investigated. While vehicle acceleration is shown to be more sensitive to road roughness and noise and therefore less reliable than direct bridge measurements, damage is successfully identified in favourable scenarios.

Simulation of three-dimension cutting force and tool deflection in the end milling operation based on finite element method

This paper presents a 3D simulation system which is employed in order to predict cutting forces and tool deflection during end-milling operation. In order to verify the accuracy of 3D simulation, results (cutting forces and tool deflection) were compared with those based on the theoretical relationships, in terms of agreement with experiments. The results obtained indicate that the simulation is capable of predicting the cutting forces and tool deflection.

Comparative study of tool life and hole quality in drilling of CFRP/titanium stack using coated carbide drill

The use of hybrid materials including carbon fiber reinforced plastics (CFRPs) and lightweight metals such as titanium are increasing particularly in aerospace applications. Multi-material stacks require a number of holes for the assembly purposes. In this research, drilling trials have been carried out in CFRP, Ti-6Al-4V and CFRP/Ti-6Al-4V stack workpieces using AlTiN coated tungsten carbide drill bit. The effects of process parameters have been investigated. The thrust force, torque, burr formation, delamination, surface roughness and tool wear have been analyzed at various processing condition. The experimental results have shown that the thrust force, torque, burr formation and the average surface roughness increase with the increased feed rate and decrease with the increased cutting speed in drilling of Ti-6Al-4V. In drilling CFRP, delamination and the average surface roughness has similar tendency with the cutting parameters however thrust force and torque rises with the increased cutting speed. The results showed that after making 15 holes in CFRP/Ti-6Al-4V stack, measured thrust forces were increased by 20% in CFRP and by 45% in Ti-6Al-4V. Delamination was found to be much smaller in drilling of CFRP in stack from compared to drilling single CFRP. Tool life was significantly shortened in drilling of stack due to the combination of the wear mechanisms.

Teachers’ Perspectives on Moving Image as a digital literacy tool in Creative Classrooms

Eight Creative Classroom (CCR) elements are used as a framework for analysing teachers’ current attitudes towards the use of moving images as a tool for teaching digital literacy to pupils aged 11-18 years in the context of ‘Creative Classrooms’. This paper reports on the challenges being faced by innovative teachers willing to adopt moving image (as a new ICT) into their teaching, and highlights the gaps currently present in the systemic support structures in schools which need to be addressed for innovative pedagogical practices to occur in these Creative Classrooms. By ensuring educators learn from their experiences of poor ICT uptake in the past and utilise these lessons for future innovations in classrooms, it is hoped that the transition to moving image, and its associated digital literacy skills, will be smooth and beneficial to the learners.

An Enchanted Tool? Humanitarian Assistance and the ILC Draft Articles on the Protection of Persons in the Event of Disasters

Despite previous attempts at codification of international law regarding international responses to natural and human-made disasters, there is currently no binding international legal framework to regulate the provision of humanitarian assistance outside armed conflicts. Nevertheless, since the International Law Commission (ILC) included the protection of persons in the event of disasters on its programme of work in 2006, it has provisionally adopted eleven draft articles that have the potential to create binding obligations on states and humanitarian actors in disaster settings. Draft articles adopted include the definition of ‘a disaster’, the relationship of the draft articles to the international humanitarian law of armed conflict, recognition of the inherent dignity of the human person, and the duty of international cooperation. However, the final form of the draft articles has not been agreed. The Codification Division of the UN Office of Legal Affairs has proposed a framework convention format, which has seen support in the ILC and the UN General Assembly Sixth Committee. The overall aim of this article is to provide an analysis of the potential forms of international regulation open to the ILC and states in the context of humanitarian responses to disasters. However to avoid enchanting the ILC draft articles with unwarranted power, any examination of form requires an understanding of the substantive subject matter of the planned international regulation. The article therefore provides an overview of the international legal regulation of humanitarian assistance following natural and human-made disasters, and the ILC’s work to date on the topic. It then examines two key issues that remain to be addressed by the ILC and representatives of states in the UN General Assembly Sixth Committee. Drawing on the UN Guiding Principles on Internal Displacement, the development and implications of binding and non-binding international texts are examined, followed by an analysis of the suggested framework convention approach identified by the Special Rapporteur as a potential outcome of the ILC work.

Integrated Earth Resistivity Tomography (ERT) and Multilevel Gas Sampling: A Tool to Map Geogenic and Anthropogenic Methane Accumulation on Brownfield Sites

Soil gas emissions of methane and carbon dioxide on brownfield sites are usually attributed to anthropogenic activities; however geogenic sources of soil gas are often not considered during site investigation and risk management strategies. This paper presents a field study at a redeveloped brownfield site on a flood plain to identify accumulations of methane biogas trapped in underlying sediments. The investigation is based on a multidisciplinary approach using direct multi-level sampling measurements and Earth resistivity tomography . Resistivity imaging was applied to evaluate the feasibility of identifying the size and spatial continuity of soil gas accumulations in anthropogenic and naturally occurring deposits. As a result, biogas accumulations are described within both anthropogenic deposits and pristine organic sediments. This result is important to identify the correct approaches to identify and manage risks associated with soil gas emissions on brownfield and pristine sites. The organic-rich sediments in Quaternary fluvial environments of São Paulo Basin in particular the Tietê River, biogas reservoirs can be generated and trapped beneath geogenic and anthropogenic layers, potentially requiring the management of brownfield developments across this region.

Targeted Impersonation As A Tool For The Detection Of Biometric System Vulnerabilities

This paper argues that biometric verification evaluations can obscure vulnerabilities that increase the chances that an attacker could be falsely accepted. This can occur because existing evaluations implicitly assume that an imposter claiming a false identity would claim a random identity rather than consciously selecting a target to impersonate. This paper shows how an attacker can select a target with a similar biometric signature in order to increase their chances of false acceptance. It demonstrates this effect using a publicly available iris recognition algorithm. The evaluation shows that the system can be vulnerable to attackers targeting subjects who are enrolled with a smaller section of iris due to occlusion. The evaluation shows how the traditional DET curve analysis conceals this vulnerability. As a result, traditional analysis underestimates the importance of an existing score normalisation method for addressing occlusion. The paper concludes by evaluating how the targeted false acceptance rate increases with the number of available targets. Consistent with a previous investigation of targeted face verification performance, the experiment shows that the false acceptance rate can be modelled using the traditional FAR measure with an additional term that is proportional to the logarithm of the number of available targets.

‘Bricolage’: reclaiming a conceptual tool

This article provides the genealogy of bricolage and underscores the modifications it has undergone within the sociologies of culture and religion. It draws on the study of three new religious movements that teach unconventional versions of Hinduism and kabbalah, to show that the current understanding of bricolage in the studies of popular culture and religion overestimates its eclectic and personal nature and neglects its sociocultural logics. It tends to take for granted the availability of cultural resources used in bricolage, and finally it fails to understand the social significance of individualism, overlooking the ways in which norms and power could be expressed through culture in the contemporary world. This article suggests that it would be best reclaiming bricolage’s original meaning, prompting questions about the contexts that make certain elements available, social patterns that may organise bricolage, who ‘bricole’, what for, who is empowered, from what and by using whose tradition.