Effectiveness of the KiVa Antibullying Program

According to the participant role approach (Salmivalli, Lagerspetz, Björkqvist, Österman, & Kaukiainen, 1996), bullying is a group phenomenon that is largely enabled and maintained by the classmates taking on different participant roles (e.g., reinforcers or assistants of the bully). There is, however, very little evidence on whether the bystander behaviors actually have an effect on the risk for victimization. Furthermore, the participant role approach implies that the bystanders should be used in putting an end to bullying. This view has been put into practice in the KiVa antibullying program, but it has not yet been investigated whether the program is effective. Four studies were conducted to investigate, (a) whether the behaviors of bystanders have an effect on the risk for victimization (Study I) and (b) whether the KiVa program reduces bullying and victimization and has other beneficial effects as well (Studies II–IV). The participants included large samples of elementary and lower secondary school students (Grades 1–9) from Finland. The assessments were done with web-based questionnaires including questions about bullying and victimization (both self- and peer reports), and about several bullying-related constructs. The results of this thesis suggest that bystander behaviors in bullying situations may influence the risk for victimization of vulnerable students. Moreover, the results indicate that the KiVa antibullying program is effective in reducing victimization and bullying. The program effects are larger in elementary schools than in lower secondary schools, whereas in Grades 8 and 9, they are larger for boys than girls for some peer-reported outcomes. The magnitude of the overall effects can be considered practically significant when obtained in a large-scale dissemination of the program.

The effectiveness of financial innovation support tools. Comparative study of Latvia and Finland

In the Innovation Union Scoreboard of 2011, Latvia ranked last amongst the EU countries in innovation performance. Even though there is sufficient scientific and technological basis, the results remain modest or low in most of the indicators concerning innovations. Several aspects influence the performance a national innovation system. In Latvia, the low effectiveness is often attributed to lack of financial support tools. As a comparison, Finland was chosen because of its well-established and documented innovation system. The aim of this study is to research the efficiency and effectiveness of the current financial innovation support tool system in Latvia from the point of view of an innovating company. It also attempts to analyze the support tool system of Latvia and compare to the relevant parts of the Finnish system. The study found that it is problematic for innovative companies in Latvia to receive the necessary funding especially for start-ups and SMEs due to the low number of grant programs, funds and lacking offer from banks, venture capital and business angels. To improve the situation, the Latvian government should restructure the funding mechanisms putting a bigger emphasis on innovative start-ups and SMEs. That would lay a foundation for future growth and boost research and scientific activities in Latvia.

Thermal Stress in a Roll-to-Roll Printed Electronics Substrate

The Roll-to-Roll process makes it possible to print electronic products continuously onto a uniform substrate. Printing components on flexible surfaces can bring down the costs of simple electronic devices such as RFID tags, antennas and transistors. The possibility of quickly printing flexible electronic components opens up a wide array of novel products previously too expensive to produce on a large scale. Several different printing methods can be used in Roll-to-Roll printing, such as gravure, spray, offset, flexographic and others. Most of the methods can also be mixed in one production line. Most of them still require years of research to reach a significant commercial level. The research for this thesis was carried out at the Konkuk University Flexible Display Research Center (KU-FDRC) in Seoul, Korea. A system using Roll-to-Roll printing requires that the motion of the web can be controlled in every direction in order to align different layers of ink properly. Between printers the ink is dried with hot air. The effects of thermal expansion on the tension of the web are studied in this work, and a mathematical model was constructed on Matlab and Simulink. Simulations and experiments lead to the conclusion that the thermal expansion of the web has a great influence on the tension of the web. Also, experimental evidence was gained that the particular printing machine used for these experiments at KU-FDRC may have a problem in controlling the speeds of the cylinders which pull the web.

Effectiveness of an illustrated home exercise guide on promoting urinary continence during pregnancy: a pragmatic randomized clinical trial

OBJETIVO: Avaliar a efetividade de um manual de orientação de exercícios domiciliares (MOED) para o assoalho pélvico (AP) na promoção da continência urinária em gestantes primigestas.MÉTODOS: Ensaio clínico com 87 participantes, avaliadas 6 vezes durante a gestação e divididas aleatoriamente em 3 grupos: Grupo supervisionado (Gsup), que praticou exercícios com supervisão; Grupo observado (Gobs), que praticou exercícios sem supervisão, e Grupo referência (Gref), que não praticou exercícios. Incontinência urinária (IU) (desfecho primário) e força muscular perineal (FMP) (desfecho secundário) foram avaliadas por intermédio de diário de perdas urinárias e perineometria, respectivamente. Foram utilizados o teste de Kruskal-Wallis, seguido do teste post hoc de Dunn, para variáveis contínuas, e o teste do χ2 e testes Z, com correções de Bonferroni, para proporções, com nível de significância de 5%.RESULTADOS: O Gsup e o Gobs apresentaram 6,9% de gestantes incontinentes, enquanto o Gref apresentou 96,6% de incontinentes. Quanto à FMP, o Gsup e o Gobs apresentaram valores médios de contração de 10 e 8,9 cmH2O, respectivamente, enquanto o Gref apresentou valor de 4,7 cmH2O. Ambos os resultados significantes.CONCLUSÃO: A utilização de um MOED é eficaz na promoção da continência urinária e no aumento da FMP em gestantes primigestas, independentemente de supervisão permanente.

Cost-effectiveness analysis in South Karelia Central Hospital

The target organization of this study, otherwise South-Karelia Social and Health Care District (Eksote) provides health, senior, family and social welfare services. South Karelia Central Hospital provides special health care and offers health services from all of the most important medical specialties. Eksote has in use 15D instrument to measure the health-related quality of life (HRQoL) of their patients before and after their interventions for observing the health effects of the medical care. Furthermore, 15D allows measuring the effectiveness and cost-effectiveness of health care when comparing these before and after results of the 15D measurements and adding the costs of the interventions into this research. The main purposes of this study were to analyze the effectiveness and cost-effectiveness of medical care in South Karelia Central Hospital by using the gathered 15D data to calculate effectiveness and cost-effectiveness ratios and to analyze the reliability and availability of the data. Study has been conducted using literature review and quantitative research methods. The results indicate that from the patients within the eight units selected to this study the 15D change information was available from the 52 %, the 15D change and the cost information from 38 % and the information of quality-adjusted life years (QALYs) produced and the cost information from 35 %. The effectiveness and cost-effectiveness of medical care were greatest at the units of Pain Outpatient Clinic and Rheumatic Diseases Outpatient Clinic. The most effective medical care is given in the unit where the average price of one produced QALY is the highest (Orthopedics). However, the calculated standard deviations pointed out that there are great variances in the effectiveness and cost-effectiveness within the units also.

Thermal radiation in combustion systems

A numerical procedure for solving the nongray radiative transfer equation (RTE) in two-dimensional cylindrical participating media is presented. Nongray effects are treated by using a narrow-band approach. Radiative emission from CO, CO2, H2O, CH4 and soot is considered. The solution procedure is applied to study radiative heat transfer in a premixed CH4-O2, laminar, flame. Temperature, soot and IR-active species molar fraction distributions are allowed to vary in the axial direction of the flame. From the obtained results it is possible to quantify the radiative loss in the flame, as well as the importance of soot radiation as compared to gaseous radiation. Since the solution procedure is developed for a two-dimensional cylindrical geometry, it can be applied to other combustion systems such as furnaces, internal combustion engines, liquid and solid propellant combustion.

Numerical and experimental investigation of thermal louvers for space applications

Thermal louvers, using movable or rotating shutters over a radiating surface, have gained a wide acceptance as highly efficient devices for controlling the temperature of a spacecraft. This paper presents a detailed analysis of the performance of a rectangular thermal louver with movable blades. The radiative capacity of the louver, determined by its effective emittance, is calculated for different values of the blades opening angle. Experimental results obtained with a prototype of a spacecraft thermal louver show good agreement with the theoretical values.

Overview on the Cost-effectiveness of Maritime Safety Policy Instruments

Maritime safety is an issue that has gained a lot of attention in the Baltic Sea area due to the dense maritime traffic and transportation of oil in the area. Lots of effort has been paid to enhance maritime safety in the area. The risk exists that excessive legislation and other requirements mean more costs for limited benefit. In order to utilize both public and private resources efficiently, awareness is required of what kind of costs maritime safety policy instruments cause and whether the costs are in relation to benefits. The aim of this report is to present an overview of the cost-effectiveness of maritime safety policy instruments focusing on the cost aspect: what kind of costs maritime safety policy causes, to whom, what affects the cost-effectiveness and how cost-effectiveness is studied. The study is based on a literature review and on the interviews of Finnish maritime experts. The results of this study imply that cost-effectiveness is a complicated issue to evaluate. There are no uniform practices for which costs and benefits should be included in the evaluation and how they should be valued. One of the challenges is how to measure costs and benefits during the course of a longer time period. Often a lack of data erodes the reliability of evaluation. In the prevention of maritime accidents, costs typically include investments in ship structures or equipment, as well as maintenance and labor costs. Also large investments may be justifiable if they respectively provide significant improvements to maritime safety. Measures are cost-effective only if they are implemented properly. Costeffectiveness is decreased if a measure causes overlapping or repetitious work. Costeffectiveness is also decreased if the technology isn’t user-friendly or if it is soon replaced with a new technology or another new appliance. In future studies on the cost-effectiveness of maritime safety policy, it is important to acknowledge the dependency between different policy instruments and the uncertainty of the factors affecting cost-effectiveness. The costs of a single measure are rarely relatively significant and the effect of each measure on safety tends to be positive. The challenge is to rank the measures and to find the most effective combination of different policy instruments. The greatest potential offered for the analysis of cost-effectiveness of individual measures is their implementation in clearly defined risk situations, in which different measures are truly alternative to each other. Overall, maritime safety measures do not seem to be considered burdening for the shipping industry in Finland at the moment. Generally actors in the Finnish shipping industry seem to find maintaining a high safety level important and act accordingly.

Ion mobility spectrometry in liquid analysis

Ion mobility spectrometry (IMS) is a straightforward, low cost method for fast and sensitive determination of organic and inorganic analytes. Originally this portable technique was applied to the determination of gas phase compounds in security and military use. Nowadays, IMS has received increasing attention in environmental and biological analysis, and in food quality determination. This thesis consists of literature review of suitable sample preparation and introduction methods for liquid matrices applicable to IMS from its early development stages to date. Thermal desorption, solid phase microextraction (SPME) and membrane extraction were examined in experimental investigations of hazardous aquatic pollutants and potential pollutants. Also the effect of different natural waters on the extraction efficiency was studied, and the utilised IMS data processing methods are discussed. Parameters such as extraction and desorption temperatures, extraction time, SPME fibre depth, SPME fibre type and salt addition were examined for the studied sample preparation and introduction methods. The observed critical parameters were extracting material and temperature. The extraction methods showed time and cost effectiveness because sampling could be performed in single step procedures and from different natural water matrices within a few minutes. Based on these experimental and theoretical studies, the most suitable method to test in the automated monitoring system is membrane extraction. In future an IMS based early warning system for monitoring water pollutants could ensure the safe supply of drinking water. IMS can also be utilised for monitoring natural waters in cases of environmental leakage or chemical accidents. When combined with sophisticated sample introduction methods, IMS possesses the potential for both on-line and on-site identification of analytes in different water matrices.

Thermal-Aware Networked Many-Core Systems

Advancements in IC processing technology has led to the innovation and growth happening in the consumer electronics sector and the evolution of the IT infrastructure supporting this exponential growth. One of the most difficult obstacles to this growth is the removal of large amount of heatgenerated by the processing and communicating nodes on the system. The scaling down of technology and the increase in power density is posing a direct and consequential effect on the rise in temperature. This has resulted in the increase in cooling budgets, and affects both the life-time reliability and performance of the system. Hence, reducing on-chip temperatures has become a major design concern for modern microprocessors. This dissertation addresses the thermal challenges at different levels for both 2D planer and 3D stacked systems. It proposes a self-timed thermal monitoring strategy based on the liberal use of on-chip thermal sensors. This makes use of noise variation tolerant and leakage current based thermal sensing for monitoring purposes. In order to study thermal management issues from early design stages, accurate thermal modeling and analysis at design time is essential. In this regard, spatial temperature profile of the global Cu nanowire for on-chip interconnects has been analyzed. It presents a 3D thermal model of a multicore system in order to investigate the effects of hotspots and the placement of silicon die layers, on the thermal performance of a modern ip-chip package. For a 3D stacked system, the primary design goal is to maximise the performance within the given power and thermal envelopes. Hence, a thermally efficient routing strategy for 3D NoC-Bus hybrid architectures has been proposed to mitigate on-chip temperatures by herding most of the switching activity to the die which is closer to heat sink. Finally, an exploration of various thermal-aware placement approaches for both the 2D and 3D stacked systems has been presented. Various thermal models have been developed and thermal control metrics have been extracted. An efficient thermal-aware application mapping algorithm for a 2D NoC has been presented. It has been shown that the proposed mapping algorithm reduces the effective area reeling under high temperatures when compared to the state of the art.

Growth and development of honey weed based on days or thermal units

This work was carried out with the objective of evaluating the growth and development of honey weed (Leonurus sibiricus) based on days or thermal units (growing degree days). Thus, two independent trials were developed to quantify the phenological development and total dry mass accumulation in increasing or decreasing photoperiod conditions. Considering only one growing season, honey weed phenological development was perfectly fit to day scale or growing degree days, but with no equivalence between seasons, with the plants developing faster at increasing photoperiods, and flowering 100 days after seeding. Even day-time scale or thermal units were not able to estimate general honey weed phenology during the different seasons of the year. In any growing condition, honey weed plants were able to accumulate a total dry mass of over 50 g per plant. Dry mass accumulation was adequately fit to the growing degree days, with highlights to a base temperature of 10 ºC. Therefore, a higher environmental influence on species phenology and a lower environmental influence on growth (dry mass) were observed, showing thereby that other variables, such as the photoperiod, may potentially complement the mathematical models.

Initial growth and development of southern sandbur based on thermal units

Availability of basic information on weed biology is an essential tool for designing integrated management programs for agricultural systems. Thus, this study was carried out in order to calculate the base temperature (Tb) of southern sandbur (Cenchrus echinatus), as well as fit the initial growth and development of the species to accumulated thermal units (growing degree days - GDD). For that purpose, experimental populations were sown six times in summer/autumn conditions (decreasing photoperiod) and six times in winter/spring condition (increasing photoperiod). Southern sandbur phenological evaluations were carried out, on alternate days, and total dry matter was measured when plants reached the flowering stage. All the growth and development fits were performed based on thermal units by assessing five base temperatures, as well as the absence of it. Southern sandbur development was best fit with Tb = 12 ºC, with equation y = 0,0993x, where y is the scale of phenological stage and x is the GDD. On average, flowering was reached at 518 GDD. Southern sandbur phenology may be predicted by using mathematical models based on accumulated thermal units, adopting Tb = 12 ºC. However, other environmental variables may also interfere with species development, particularly photoperiod.