Limpeza da superfície de corte de rebolos por um sistema de ar comprimido na retificação cilíndrica externa de mergulho de materiais cerâmicos refrigerados com a técnica da mínima quantidade de lubrificante (MQL)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comportamento de parâmetros fisiológicos de homens e mulheres em condições de estresse laboral submetidos à técnica Watsu

The physiological variations of parameters in situations of laboral stress can function like indicator in the sprouting of disorder. Those conditions have led researchers to investigate alternatives that can favor the quality of life in persons under stress laboral. The present research had as objectives investigate the physiological behavior of parameters (blood pressure, heart hat and respiratory hat) of men and women in condition of stress laboral submitted to the technique Watsu. It was used a experimental methodology with a group formed by men and women in reproductive age, that work as salesclerk in a supermarket net in Natal/RN. The seven individuals selected were submitted to the three phases of the study (dependent groups), that consisted of the phase 1 of obtaining from the measure basal (control 1), in the phase 2 of immersion in the water (control 2), and phase 3 from the application the technique Watsu (experimental phase). It was verified that during the phase basal (condition 1) the physiological parameters (BPS, BPD, HH and RH) of both sexes evaluated showed the medium values of the women (average±detour-standard: BSP = 104.1±7.92; BPD = 70.83 ±7.92; HH = 77.58 ±3.87; RH = 19.83 ±2.58) similar those presented by the men (BPS = 118.75 ±7.55; BPD = 75.00 ±9.91; HH = 71.75 ±14.95; RH = 16.62 ±3.99). The evaluation of those parameters before and after immersion of the volunteers in the water (condition 2) showed a significant reduction (W = 3.0: p≤0.05) barely for the values of BPS presented by the sex females after immersion. In the men group, all of the physiological parameters analyzed did not vary significantly. Regarding the profile of those variables before and after application of the watsu (condition 3), was verified a significant increase (W= 0,0: p≤0.05) for the BPS one and SABP in the women. The Men did not show significant variation for all of the physiological parameters. Faced with the results presented, we are able to conclude that the systolic and diastolic blood pressures were the physiological parameters that are on influence from the Technique Watsu, only for the kind females

Reflexões sobre a formação clínica fenomenológico-existencial na era da técnica

Phenomenology is the focus of this study for its critique of the limits of positivist science, which guides most of the fields of study including Psychology. The clinical formation process in Psychology courses is especially difficult for students-interns who adopt phenomenology as their clinical framework. Such difficulty is due to the incompatibility between theory provided in Psychology courses a science traditionally based on paradigms of scientism , and the theoretical-methodological proposal adopted by the aforementioned approach. As a backdrop for our study, we carefully examined the thought of philosopher Martin Heidegger, especially the Era of Technique. This contemporary technicism society was studied so that we could understand the socio-cultural status where this formation lies. Thus, we questioned if this panorama upon which Clinical Psychology rests favors the development of a phenomenological attitude and a special look at the meanings of existence, as defined in phenomenological clinical practice. Knowing such limits, our research aimed at understanding the experience of formation of clinical psychologists who take part in internships in the field of phenomenology-existentialism. Such study was, then, a phenomenological-hermeneutic research based on Heideggerian ontology and used a semi-structured interview as access tool. Six students of the UFRN higher-degree Psychology course who were doing their supervised internship in clinical psychology and the referred approach took part in this research. The research revealed that the phenomenological-existential formation phase opens a door to discoveries on the part of the intern that transcend the dimension of the other, for they show a self disclosure while a person in the word. Despite the initial discomforts caused by the course curriculum itself and by the freedom for clinical practice, so characteristic of phenomenology, the narratives demonstrate that such difficulties may start a process of search for new meanings, which show a search for sharpening their practices and for a path in balance with the existence of the other

Fidelidade à área e padrão de associação em Sotalia guianensis, baseado na técnica de foto-identificação

The behavioral patterns follow to environmental changes, including area fidelity and individuals association patterns. Several techniques are used to record these behavioral patterns and the photo-identification has been suggested as a proper tool because of its various advantages. Based on this technique, this research verified, between August of 2005 and January of 2006, area fidelity and association patterns of Sotalia guianensis, at Distrito de Pipa s bays, Rio Grande do Norte State south coast. Besides, we measured the association patterns by using the Jaccard index or Half-Weight Index (HWI). According the observation, 22 individuals were not resighted, 11 were resighted, and 36 new individuals were recorded. Nowadays, 69 individuals are cataloged. The residency rate indicated heterogeneity on studied area permanence and the association patterns between photo-identified seem to be context-specific. In addiction, the comparison of associations between two different age classes showed some individuals more frequently interacting with immature individuals. We also observed fluidity on association patterns among our individuals. We suggest that S. guianensis population from Pipa shows plasticity

Técnica de parametrização geométrica para o fluxo de carga continuado baseado nas variáveis tensão nodal e fator de carregamento

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aplicação da técnica eletroanalítica de pulso diferencial usando o eletrodo de carbono vítreo modificado com cisteína para monitorar a degradação eletroquímica de ácido oxálico

In this paper, the technique of differential pulse voltammetry (DPV) has been studied for monitoring the concentration of oxalic acid (OA) during their electrochemical oxidation (EO) in acidic medium using platinum anode supported on titanium (Ti / Pt). The DPV was standardized and optimized using a glassy carbon electrode modified with cysteine. The modification with cysteine was developed electrochemically, forming a polymeric film on the surface of the glassy carbon electrode. The formation of the polymer film was confirmed by analysis of scanning electron microscope and atomic force microscope, confirming the modification of the electrode. The electrochemical degradation was developed using different current densities 10, 20 30 and 40 mA cm -2 electrode with Ti / Pt observing the degradation of oxalic acid, and monitored using the method of KMnO4 titration. However, the analyzes with DPV showed the same behavior elimination of oxalic acid titration. Compared with the titration method classical observed and DPV could be a good fit, confidence limits of detection and confirming the applicability of the technique electroanalytical for monitoring the degradation of oxalic acid

Análise comparativa na influência da técnica de moldagem funcional em arcos parcialmente edêntulos sobre os pontos de contato oclusais, a integridade da fibromucosa e a extensão da base da prótese

There is a lack of clinical studies evaluating techniques of functional impression for partially edentulous arches. The aim of this double-blind non-randomized controlled clinical trial was to compare the efficacy of altered cast impression (ACI) and direct functional impression (DFI) techniques. The efficacy was evaluated regarding the number of occlusal units on denture teeth, mucosa integrity at 24-hour follow-up and denture base extension. The sample included 51 patients (female and male) with mean age of 58.96 years treated at Dental Department of UFRN. The patients, exhibiting edentulous maxilla and mandibular Kennedy class I, were divided into two groups (group ACI, n=29; group DFI, n=22). Clinical evaluation was based on the number of occlusal units on natural and/or artificial teeth, mucosa integrity at 24-hour follow-up, and denture base extension. Statistical analysis was conducted using the software SPSS 17.0® (SPSS Inc., Chicago, Illinois). Student T-test was used to reveal association between number of occlusal units and impression technique while chi-square test showed association between mucosa integrity and impression technique. Fischer s exact test was applied for association between denture base extension and impression technique at 95% level of significance. No significant difference was observed between the groups regarding number of occlusal units, mucosa integrity and denture base extension. The altered cast technique did not provide significant improvement in comparison to the direct technique when the number of occlusal units, mucosa integrity and denture base extension

Avaliação clínica de pacientes submetidos à colocação de implantes zigomáticos pela técnica de Stella & Warner

This study aimed to evaluate patients who underwent placement of zygomatic implants technique by Stella & Warner, considering the survival of conventional and zygomatic implants, sinus health and level of patient satisfaction in relation to oral rehabilitation. We evaluated 28 patients where 14 had received conventional and zygomatic implants, being rehabilitated with implant-fixed dentures (group 1) and 14 were rehabilitated only with conventional implants and implant-fixed dentures (group 2). The study had four phases, represented by radiographic evaluation of implants (stage I), clinical evaluation (stage II), assessing the health of the maxillary sinus (stage III) and a questionnaire to measure satisfaction of rehabilitation with fixed prosthesis implant Total -backed (stage IV). Group 2 underwent only stage IV, while group 1 participated in all stages. Descriptive analysis and statistics were performed, using the t test for independent samples in the evaluation of phase IV. The results demonstrated that the technique of Stella & Warner proved effective, allowing a high survival rate of conventional implants and zygomatic (100%), considering a minimum follow-up of 15 months and maximum 53 months after prosthetic rehabilitation. There were no pathological changes in tissues periimplants conventional and zygomatic implants analyzed. Radiographic findings showed satisfactory levels bone implants in the oral rehabilitation with conventional zygomatic implants and a good positioning of the apex of the zygomatic implants over the zygomatic bone. The presence of the zygomatic implant did not cause sinus and the t test showed a satisfaction index lower in group 1 compared with group 2. The zygomatic implant placement technique by Stella & Warner proved to be a predictable technique with high survival rate in patients with atrophic jaws, necessitating long-term follow-up to confirm the initial findings of the study

Influência da técnica de fabricação e dos materiais sobre o ajuste da interface pilar/implante em infraestruturas implantossuportadas

The aim of this study was to compare the misfit vertical, horizontal and passivity of zirconia and cobalt-chromium frameworks fabricated for CAD / CAM technology and conventional method of casting. Sixteen frameworks in one-piece, were obtained from a metallic matrix containing three Brånemark compatible implants with regular platform (Titamax Cortical Ti, Neodent). Eight frameworks were fabricated by CAD / CAM system (NeoShape, Neodent): four in zirconia (ZirCAD) and four cobalt-chromium (CoCrcad). Eight other frameworks were obtained by conventional casting method: four cobalt-chromium with UCLA abutment premachined Co-Cr (CoCrUCci) and four cobalt-chromium with UCLA abutment castable (CoCrUCc). The fit vertical, horizontal and passivity by one-screw test were measured using scanning electron microscopy with magnification of 250x. Initially evaluated the passivity by one-screw test and subsequently to assess the vertical and horizontal misfit, tightened all the screws with a torque of 20 Ncm. Mean, standard deviation, minimum and maximum values were calculated for each group. Measurements of horizontal misfit were transformed into cumulative frequency for categorization of the variable and the group later comparison groups. To evaluate the existence of quantitative differences between the groups tested for vertical misfit and passivity, we used the Kruskal-Wallis test. The Mann-Whitney test was used to compare group to group statistical differences (p <0.05). Were observed the respective mean and standard deviation for vertical misfit and passivity in micrometers: ZirCAD (5.9 ± 3.6, 107.2 ± 36), CoCrcad (1.2 ± 2.2, 107.5 ± 26 ), CoCrUCci (11.8 ± 9.8, 124.7 ± 74), CoCrUCc (12.9 ± 11.0, 108.8 ± 85). There were statistical differences in measures of vertical misfit (p = 0.000). The Mann-Whitney test revealed statistical differences (p <0.05) between all groups except between CoCrUCci and CoCrUCc (p = 0.619). No statistical difference was observed for the passivity. In relation to the horizontal misfit groups ZirCAD and CoCrcad did not show best values in relation to CoCrUCci and CoCrUCc. Based on the results it can be concluded that frameworks fabricated by CAD / CAM technology had better values of vertical fit than those manufactured by the casting method, nevertheless, the passivity was not influenced by manufacturing technique and material used. The horizontal fit obtained by frameworks manufactured by CAD / CAM was not superior to those manufactured by casting. A lower variability in vertical adjustment and passivity was observed when frameworks were fabricated by CAD / CAM technology

Análises técnica e econômica da cultura da bananeira 'Maçã' (Musa spp.) na região noroeste do Estado de São Paulo

Este trabalho foi realizado no Escritório de Desenvolvimento Rural - Jales, região noroeste do Estado de São Paulo, com o objetivo de efetuar um levantamento do potencial da cultura da banana 'Maçã' na região, determinando-se indicadores técnicos e econômicos de dois sistemas de produção, os quais utilizam, no plantio, mudas micropropagadas e convencional. O levantamento de dados necessários à realização da pesquisa nos aspectos ligados à elaboração das matrizes de coeficientes técnicos, base para estimativas de custos de produção, foi obtido diretamente junto a produtores da região, e a metodologia de custos foi baseada no custo total de produção. Os resultados econômicos mostraram-se satisfatórios na região para os dois sistemas de produção, mas a receita líquida obtida com a utilização de mudas micropropagadas foi 34% maior que a obtida no sistema convencional.

Análise técnica e econômica do cultivo do cajueiro-anão (Anacardium occidentale L.) na regional de Jales-SP

Objetivou-se estimar os custos de produção e lucratividade do caju in natura na Regional de Jales, noroeste do Estado de São Paulo. Os dados foram levantados junto a produtores, a partir da aplicação de questionário e da elaboração de planilhas, para caracterizar todo o processo produtivo e realizar análise econômica. A produção de fruta para mesa exige um sistema de cultivo mais intensivo, principalmente no controle de pragas e doenças; por sua vez, eleva o custo de produção que, via de regra, é compensada pelos preços alcançados. Os custos de produção são altos, mas o que deve ser destacada é a participação relativa das embalagens que pode chegar a um terço do custo operacional efetivo, seguido pelos custos pós-colheita. Os indicadores de lucratividade mostram que a produção de caju é rentável nesta região, e o índice de lucratividade foi de 46,50%.

A assistência técnica e extensão rural no assentamento modelo: proposição e realidade

This discourse analyzes the technical assistance concerning the rural settlement, which is seen as a demand of the social movement that claims for agrarian reformation, and is a goal of II PNRA, launched in may 2004, as a essential national public politics on process of building and consolidation of settlement and familiar agriculture, proposing the return of technical assistance service and rural extension in Brazil, which were started in the and of 1940 s. We analyze, in particular, the technical assistance program, social and environmental agrarian reformation, on model settlement, a program created, especially, to the rural settlements, coordinated by INCRA. Based on the documental analyze and local study, it is noticed that the experience of technical assistance implemented on model settlement shows the non continuation and fragility on technical assistance actions to rural workers. This context goes against the lately technical assistance governmental apparatus, which ensures to make settlements stronger, to support and to get important the familiar agriculture system. This way, technical assistance execution, trough the tertiary service, follows the neoliberal strategy and, the State, besides decreases the estimate to public politics, takes its actions control from the State to the shared control through partnership and transferring of responsibility, expressing its historic lack of attention to the worker class demands. In spite of workers resistance, expectative and hope, the lack of these services, as well as the other politics deficiencies, which are necessary to the settlements, are endangering its activities and threatening its survival in the settlement

Cooperação técnica internacional: aportes teóricos

Induzidos por uma mudança estrutural na dinâmica da sociedade internacional, muitos municípios, por meio do exercício da chamada paradiplomacia ou diplomacia federativa, vêm elaborando instrumentos de gestão municipal para captar recursos via experiências de Cooperação Técnica Internacional (CTI). Nesse contexto, o objetivo deste artigo é mapear conceitualmente o fenômeno de CTI, visando a facilitar sua compreensão e suas consequências práticas para a sociedade brasileira.

Tratamento da síndrome do roubo devido a fístula arteriovenosa para hemodiálise em membro inferior por meio da técnica de ligadura arterial e revascularização distal (técnica de DRIL)

RESUMO A fístula arteriovenosa com bom fluxo sangüíneo é de fundamental importância para os pacientes portadores de insuficiência renal crônica em tratamento hemodialítico. Uma das complicações da fístula arteriovenosa é a síndrome do roubo, mas esta é de ocorrência incomum, e o seu tratamento está diretamente indicado quando há sintomas manifestos. Vários métodos foram propostos para sua correção nos membros superiores, sendo considerada a revascularização distal com ligadura arterial o procedimento de escolha. Neste relato de caso inédito, descreve-se o tratamento da síndrome do roubo de uma fístula arteriovenosa realizada em membro inferior, tratada com sucesso por meio da mesma técnica indicada para os membros superiores.

Implementação da técnica de software pipelining na rede em chip IPNoSyS

Alongside the advances of technologies, embedded systems are increasingly present in our everyday. Due to increasing demand for functionalities, many tasks are split among processors, requiring more efficient communication architectures, such as networks on chip (NoC). The NoCs are structures that have routers with channel point-to-point interconnect the cores of system on chip (SoC), providing communication. There are several networks on chip in the literature, each with its specific characteristics. Among these, for this work was chosen the Integrated Processing System NoC (IPNoSyS) as a network on chip with different characteristics compared to general NoCs, because their routing components also accumulate processing function, ie, units have functional able to execute instructions. With this new model, packets are processed and routed by the router architecture. This work aims at improving the performance of applications that have repetition, since these applications spend more time in their execution, which occurs through repeated execution of his instructions. Thus, this work proposes to optimize the runtime of these structures by employing a technique of instruction-level parallelism, in order to optimize the resources offered by the architecture. The applications are tested on a dedicated simulator and the results compared with the original version of the architecture, which in turn, implements only packet level parallelism