Is my hand connected to my body? The impact of body continuity and arm alignment on the virtual hand illusion

When a rubber hand is placed on a table top in a plausible position as if part of a person"s body, and is stroked synchronously with the person"s corresponding hidden real hand, an illusion of ownership over the rubber hand can occur (Botvinick and Cohen 1998). A similar result has been found with respect to a virtual hand portrayed in a virtual environment, a virtual hand illusion (Slater et al. 2008). The conditions under which these illusions occur have been the subject of considerable study. Here we exploited the flexibility of virtual reality to examine four contributory factors: visuo-tactile synchrony while stroking the virtual and the real arms, body continuity, alignment between the real and virtual arms, and the distance between them. We carried out three experiments on a total of 32 participants where these factors were varied. The results show that the subjective illusion of ownership over the virtual arm and the time to evoke this illusion are highly dependent on synchronous visuo-tactile stimulation and on connectivity of the virtual arm with the rest of the virtual body. The alignment between the real and virtual arms and the distance between these were less important. It was found that proprioceptive drift was not a sensitive measure of the illusion, but was only related to the distance between the real and virtual arms.

Subjectively adapted high capacity lossless image data hiding based on prediction errors

This article reports on a lossless data hiding scheme for digital images where the data hiding capacity is either determined by minimum acceptable subjective quality or by the demanded capacity. In the proposed method data is hidden within the image prediction errors, where the most well-known prediction algorithms such as the median edge detector (MED), gradient adjacent prediction (GAP) and Jiang prediction are tested for this purpose. In this method, first the histogram of the prediction errors of images are computed and then based on the required capacity or desired image quality, the prediction error values of frequencies larger than this capacity are shifted. The empty space created by such a shift is used for embedding the data. Experimental results show distinct superiority of the image prediction error histogram over the conventional image histogram itself, due to much narrower spectrum of the former over the latter. We have also devised an adaptive method for hiding data, where subjective quality is traded for data hiding capacity. Here the positive and negative error values are chosen such that the sum of their frequencies on the histogram is just above the given capacity or above a certain quality.

The assessment of spirituality and religiousness in schizophrenia.

To assess religious coping in schizophrenia, we developed and tested a clinical grid, as no validated questionnaire exists for this population. One hundred fifteen outpatients were interviewed. Results obtained by 2 clinicians were compared. Religion was central in the lives of 45% of patients, 60% used religion extensively to cope with their illness. Religion is a multifaceted construct. Principal component analysis elicited 4 factors: subjective dimension, collective dimension, synergy with psychiatric treatment, and ease of talking about religion with psychiatrist. Different associations were found between these factors and psychopathology, substance abuse, and psychosocial adaptation. The high prevalence of spirituality and religious coping clearly indicates the necessity of addressing spirituality in patient care. Our clinical grid is suitable for this purpose. It proved its applicability to a broad diversity of religious beliefs, even pathological ones. Interjudge reliability and construct validity were high and specific training is not required.

Termination of pregnancy among teenagers - why more surgical terminations?

Introduction: In 2012, a study by K. Chatziioannidou and S-C. Renteria showed that teenagers chose to undergo a surgical termination of pregnancy (TOP) more often than a medical TOP (mifepristone followed by misoprostol) when they decided to terminate a pregnancy. It also showed that the teenagers' choice for a medical versus surgical method is inversely proportional to the adults' choice although the efficiency of the medical method showed even better results for teenagers than for adults. According to the hypothesis made, the reasons for this choice might be influenced by the following facts: (i) the belated call to make an appointment, the medical procedure not being available after 9 weeks of gestation; (ii) the imperative request for confidentiality; (iii) the beliefs and subjective appreciation of the medical staff. Objectives: The aim of this retrospective and qualitative study is to analyse the reasons why, in case of a TOP, teenagers chose the surgical method more often than their adult counterparts. Material: (i) All teenagers who were admitted for an abortive procedure during 2011 in the in- or outpatient ward. (ii) The professional team (midwives and sexual and reproductive counsellors) in charge in the case of a TOP request. Methods: The information about the patient's history and the biopsycho- social data was retrieved from the patient files filled out by midwives and sexual and reproductive health counsellors during the first appointment for a TOP request or during its process. The professionals' appreciation was evaluated by means of a semi-structured questionnaire. Results: Concerning the choice of the method for a pregnancy termination, the results of our research show that: (i) Out of 47 teenagers, 27 chose the surgical method and 17 the medical method. (ii) Three had a second trimester abortion (which includes use of the medical method). (iii) Fifteen teenagers out of the 27 who chose a surgical method consulted between the 9th and 14th weeks of amenorrhoea and therefore did not have any other choice. The reasons for their 'late arrival' will be explained in detail. The 12 teenagers who arrived before the 8th week of amenorrhoea and chose to undertake abortion by suction & curettage under general anaesthesia did it for the following reasons: (i) Four were afraid of bleeding and pain. (ii) Five thought that the organisation of the surgical procedure was easier. (iii) Two did not trust the abortion pill. (iv) One was taken to her mother's gynaecologist where she had a D&C. Confidentiality was requested nine times out of 27 when choosing the surgical method, and six times out of 17 when choosing the medical method. Therefore, although confidentiality concerns a third of the teenagers' pregnancy termination requests, it does not seem to be a significant element for the choice of the method. As for the subjective appreciation of the professionals, the first results of the discussions seem to show that teenagers were reluctant or resistant towards the medical method. Conclusion: This study shows that the reasons why teenagers still prefer the use of the surgical over the medical method compared to adults, seem to include the late request for an appointment, fear of pain and bleeding and organisational issues. Confidentiality does not seem to greatly influence the teenagers' choice. Nonetheless, medical professionals seem to favour the suction curettage procedure performed under anesthesia because they associate young age with vulnerability and psychological frailty and consequently diminished ability to cope with pain and emotional distress during the medical procedures.

Treatment of brain metastases from non-small cell lung cancer with whole-brain radiotherapy (wbrt) in combination with gefitinib (gft) or temozolomide (tmz): a randomized multicenter phase ii trial of the swiss group of clinical cancer research (sakk #70/03)

BACKGROUND: Patients with BM rarely survive .6 months and are commonly excluded from clinical trials. We aimed at improving outcome by exploring 2 combined modality regimens with at the time novel agents for which single-agent activity had been shown. METHODS: NSCLC patients with multiple BM were randomized to WBRT (10 × 3 Gy) and either GFT 250 mg p.o. daily or TMZ 75 mg/m2 p.o. daily ×21/28 days, starting on Day 1 of RT and to be continued until PD. Primary endpoint was overall survival, a Simon's optimal 2-stage design was based on assumptions for the 3-month survival rate. Cognitive functioning and quality of life were also evaluated. RESULTS: Fifty-nine patients (36 M, 23 F; 9 after prior chemo) were included. Median age was 61 years (range 46-82), WHO PS was 0 in 18 patients, 1 in 31 patients, and 2 in 10 patients. All but 1 patients had extracranial disease; 33 of 43 (TMZ) and 15 of 16 (GFT) had adenocarcinoma histology. GFT arm was closed early after stage 1 analysis when the prespecified 3-mo survival rate threshold (66%) was not reached, causes of death were not GFT related. Main causes of death were PD in the CNS 24%, systemic 41%, both 8%, and toxicity 10% [intestinal perforation (2 patients), pneumonia (2), pulmonary emboli (1), pneumonitis NOS (1), seizure (1)]. We summarize here other patients' characteristics for the 2 trial arms: TMZ (n ¼ 43)/GFT (n ¼ 16); median treatment duration: 1.6 /1.8 mo; Grade 3-4 toxicity: lymphopenia 5 patients (12%)/0; fatigue 8 patients (19%)/2 patients (13%). Survival data for TMZ/GFT arms: 3-month survival rate: 58.1% (95% CI 42.1-73)/62.5% (95% CI 35- 85); median OS: 4.9 months (95% CI 2.5-5.6)/6.3 months (95% CI 2.2- 14.6); median PFS: 1.8 months (95% CI 1.5-1.8)/1.8 (95% CI 1.1-3.9); median time to neurol. progr.: 8.0 months (95% CI 2.2-X)/4.8 (95% CI 3.9-10.5). In a model to predict survival time including the variables' age, PS, number of BM, global QL, total MMSE score, and subjective cognitive function, none of the variables accounted for a significant improvement in survival time. CONCLUSIONS: The combinations of WBRT with GFT or TMZ were feasible. However, in this unselected patient population, survival remains poor and a high rate of complication was observed. Four patients died as a result of high-dose corticosteroids. Preliminary evaluation of cognitive function andQL failed to show significant improvement. Indications and patient selection for palliative treatment should be revisited and careful monitoring and supportive care is required. Research and progress for this frequent clinical situation is urgently needed. Trial partly supported by AstraZeneca (Switzerland), Essex Chemie (Switzerland) and Swiss Federal Government.

The INTERMED questionnaire for predicting return to work after a multidisciplinary rehabilitation program for chronic low back pain.

OBJECTIVES: To evaluate the performance of the INTERMED questionnaire score, alone or combined with other criteria, in predicting return to work after a multidisciplinary rehabilitation program in patients with non-specific chronic low back pain. METHODS: The INTERMED questionnaire is a biopsychosocial assessment and clinical classification tool that separates heterogeneous populations into subgroups according to case complexity. We studied 88 patients with chronic low back pain who followed an intensive multidisciplinary rehabilitation program on an outpatient basis. Before the program, we recorded the INTERMED score, radiological abnormalities, subjective pain severity, and sick leave duration. Associations between these variables and return to full-time work within 3 months after the end of the program were evaluated using one-sided Fisher tests and univariate logistic regression followed by multivariate logistic regression. RESULTS: The univariate analysis showed a significant association between the INTERMED score and return to work (P<0.001; odds ratio, 0.90; 95% confidence interval, 0.86-0.96). In the multivariate analysis, prediction was best when the INTERMED score and sick leave duration were used in combination (P=0.03; odds ratio, 0.48; 95% confidence interval, 0.25-0.93). CONCLUSION: The INTERMED questionnaire is useful for evaluating patients with chronic low back pain. It could be used to improve the selection of patients for intensive multidisciplinary programs, thereby improving the quality of care, while reducing healthcare costs.

Réserves à propos de la notion d'objectivité en lien avec l'incertitude et les probabilités rencontrées dans le procès pénal

Cette contribution présente quelques conceptions de la notion dite d' "objectivité", couramment rencontrées parmi les juristes et scientifiques, et les effets inopportuns de ces perceptions sur une vision cohérente de l'incertitude et sa gestion par les probabilités dans le procès pénal. En invoquant des positions formulées par des célèbres probabilistes du 20ème siècle, mais occasionnellement négligées dans les discussions contemporaines, les auteurs argumentent ici en faveur d'une approche alternative, pragmatique et opérationnelle : la probabilité subjective.

Product Line Profitability- Case Halton Indoors

Diplomityön tavoitteena on rakentaa malli kohdeyrityksen yhden strategisen liiketoimintayksikön tuoteryhmänkohtaisten kannattavuuksien selvittämiseksi yli kokotoimitusketjun. Työssä on keskitytty vain välillisiin kustannuksiin ja välittömien kustannusten osalta on luotettu toiminnanohjausjärjestelmän antamiin tietoihin. Työn lähtökohtana ja teoreettisena viitekehikkona on toimintoperustainen kustannuslaskenta, jonka periaatteita noudattaen kannattavuusmalli rakennettiin. Mallin periaatteet on esitetty työssä mutta sen tuottamia tuloksia ei ole syvemmin analysoitu. Ongelma osoittautui haasteelliseksi ja tulosten verifiointi lähes mahdottomaksi käytettyjen subjektiivisten arvioiden ja ennalta odottamattomien välittömien tuotekustannusten suurten virheiden vuoksi. Työn johtopäätöksissä keskitytään sisäisen laskentatoimen kulttuurin kehittämiseen tuotekustannuslaskennan ja yleisen kustannusvalvonnan näkökulmasta kohdeyrityksessä.

The building blocks of the full body ownership illusion

Previous work has reported that it is not difficult to give people the illusion of ownership over an artificial body, providing a powerful tool for the investigation of the neural and cognitive mechanisms underlying body perception and self consciousness. We present an experimental study that uses immersive virtual reality (IVR) focused on identifying the perceptual building blocks of this illusion. We systematically manipulated visuotactile and visual sensorimotor contingencies, visual perspective, and the appearance of the virtual body in order to assess their relative role and mutual interaction. Consistent results from subjective reports and physiological measures showed that a first person perspective over a fake humanoid body is essential for eliciting a body ownership illusion. We found that the illusion of ownership can be generated when the virtual body has a realistic skin tone and spatially substitutes the real body seen from a first person perspective. In this case there is no need for an additional contribution of congruent visuotactile or sensorimotor cues. Additionally, we found that the processing of incongruent perceptual cues can be modulated by the level of the illusion: when the illusion is strong, incongruent cues are not experienced as incorrect. Participants exposed to asynchronous visuotactile stimulation can experience the ownership illusion and perceive touch as originating from an object seen to contact the virtual body. Analogously, when the level of realism of the virtual body is not high enough and/or when there is no spatial overlap between the two bodies, then the contribution of congruent multisensory and/or sensorimotor cues is required for evoking the illusion. On the basis of these results and inspired by findings from neurophysiological recordings in the monkey, we propose a model that accounts for many of the results reported in the literature.

Unexplored aspects of bureaucratic autonomy: a state of the field and ways forward

This article first provides a selective overview of the literature on bureaucratic autonomy and identifies different approaches to this topic. The second section discusses three major sets of open questions, which will be tackled in the contributions to this special issue: the subjective, dynamic and relational nature of autonomy; the complex linkages between tasks, organizational forms, and national path dependencies on the one hand and autonomy and performance on the other hand; and the interplay between autonomy, accountability and democratic legitimacy.

Automatic Comparison and Evaluation of Impressions Left by a Firearm on Fired Cartridge Cases

Recent years have been characterized by a series of publications in the field of firearms investigation questioning the reliability and objectivity of such examination. This research investigates new solutions to decrease the subjective component affecting the evaluation that follows the comparison of impressions left by a firearm on the surface of spent cartridge cases. An automatic comparison system based on 3D measurements has been developed and coupled to a bivariate evaluative model allowing assigning likelihood ratios. Based on a dataset of 79 pistols (all SIG Sauer 9 mm Luger caliber), the system shows a very high discriminating power and the LRs that it provides are very indicative of the true state under both the prosecution and the defense propositions. For example, likelihood ratios exceeding a billion are predominantly obtained when impressions originating from the same source are compared. The system is also characterized by relatively low rates (≤1%) of misleading evidence depending on the firearm considered.

Experimental and clinical radiofrequency ablation: proposal for standardized description of coagulation size and geometry.

BACKGROUND: Radiofrequency (RF) ablation is used to obtain local control of unresectable tumors in liver, kidney, prostate, and other organs. Accurate data on expected size and geometry of coagulation zones are essential for physicians to prevent collateral damage and local tumor recurrence. The aim of this study was to develop a standardized terminology to describe the size and geometry of these zones for experimental and clinical RF. METHODS: In a first step, the essential geometric parameters to accurately describe the coagulation zones and the spatial relationship between the coagulation zones and the electrodes were defined. In a second step, standard terms were assigned to each parameter. RESULTS: The proposed terms for single-electrode RF ablation include axial diameter, front margin, coagulation center, maximal and minimal radius, maximal and minimal transverse diameter, ellipticity index, and regularity index. In addition a subjective description of the general shape and regularity is recommended. CONCLUSIONS: Adoption of the proposed standardized description method may help to fill in the many gaps in our current knowledge of the size and geometry of RF coagulation zones.

Modelling the Knowledge Interface between Sales and Production Functions of a Company. Case: New Service Development Process.

Yrityksen sisäisten rajapintojen tunteminen mahdollistaa tiedonvaihdon hallinnan läpi organisaation. Idean muokkaaminen kannattavaksi innovaatioksi edellyttää organisaation eri osien läpi kulkevaa saumatonta prosessiketjua sekä tietovirtaa. Tutkielman tavoitteena oli mallintaa organisaation kahden toiminnallisesti erilaisen osan välinen tiedon vaihto. Tiedon vaihto kuvattiin rajapintana, tietoliittymänä. Kolmiulotteinen organisaatiomalli muodosti tutkimuksen pääteorian. Se kytkettiin yrityksen tuotanto- ja myyntiosiin, kuten myös BestServ-projektin kehittämään uuteen palvelujen kehittämisen prosessiin. Uutta palvelujen kehittämisen prosessia laajennettiin ISO/IEC 15288 standardin kuvaamalla prosessimallilla. Yritysarkkitehtuurikehikoita käytettiin mallintamisen perustana. Tietoliittymä nimenä kuvastaa näkemystä siitä, että tieto [tietämys] on olemukseltaan yksilöiden tai ryhmien välistä. Mallinnusmenetelmät eivät kuitenkaan vielä mahdollista tietoon [tietämykseen] liittyvien kaikkien ominaisuuksien mallintamista. Tietoliittymän malli koostuu kolmesta osasta, joista kaksi esitetään graafisessa muodossa ja yksi taulukkona. Mallia voidaan käyttää itsenäisesti tai osana yritysarkkitehtuuria. Teollisessa palveluliiketoiminnassa sekä tietoliittymän mallinnusmenetelmä että sillä luotu malli voivat auttaa konepajateollisuuden yritystä ymmärtämään yrityksen kehittämistarpeet ja -kohteet, kun se haluaa palvelujen tuottamisella suuremman roolin asiakasyrityksen liiketoiminnassa. Tietoliittymän mallia voidaan käyttää apuna organisaation tietovarannon ja tietämyksen mallintamisessa sekä hallinnassa ja näin pyrkiä yhdistämään ne yrityksen strategiaa palvelevaksi kokonaisuudeksi. Tietoliittymän mallinnus tarjoaa tietojohtamisen kauppatieteelliselle tutkimukselle menetelmällisyyden tutkia innovaatioiden hallintaa sekä organisaation uudistumiskykyä. Kumpikin tutkimusalue tarvitsevat tarkempaa tietoa ja mahdollisuuksia hallita tietovirtoja, tiedon vaihtoa sekä organisaation tietovarannon käyttöä.

De l'étranger au musulman. Immigration et intégration de l'islam en Suisse

A l'instar de ses voisins européens, la Suisse abrite une population de confession musulmane d'une importance démographique croissante. Souvent présentée comme une communauté monolithique, communautariste et rigoriste, cette thèse de doctorat s'est proposée d'apporter une contribution à une appréhension plus nuancée et contrastée de l'identité musulmane. Partant du postulat constructiviste que l'identité n'est pas un état, mais un processus dynamique et complexe s'échelonnant sur les différentes étapes de la vie d'un individu, cette enquête a insisté sur les différentes stratégies identitaires que peuvent mettre en place les individus selon les contextes dans lesquels il vivent et les situations qu'ils rencontrent. Sur la base d'une analyse d'entretiens effectués auprès d'un échantillon de 15 musulmans en Suisse romande, cette recherche a par exemple montré que l'identité musulmane en Suisse était la combinaison subjective et dynamique de quatre types d'identification, à savoir une identification religieuse, une identification psychologique, une identification sociétale et une identification culturelle. L'identification religieuse témoigne des rapports différenciés à Dieu, à l'altérité religieuse, à la société et à soi que peuvent entretenir les musulmans interrogés. En ceci, elle s'exprime tour à tour ou simultanément par une religiosité institutionnelle, sociale, intellectualisée ou spirituelle. Il est aussi à relever que l'identification religieuse semble avoir un poids considérable dans l'identité des musulmans interrogés, ceci quel que soit leur degré de pratique religieuse ou l'intensité de leurs convictions. L'identification psychologique participe à la construction du soi personnel par le triple processus de similarisation, de différenciation et de singularisation. En ceci, le développement de la personnalité individuelle y joue un rôle d'avant-poste. L'identification sociétale consiste essentiellement en la construction du soi comme acteur social. Elle désigne la capacité et la volonté de l'individu de se considérer non seulement comme membre, mais véritablement comme sujet actif de la société dans laquelle il vit. En ceci, l'identification sociétale s'est intéressée aux tendances et aux valeurs de la société helvétique qu'ont intégrées dans leur identité les musulmans de l'enquête. L'identification culturelle a principalement illustré le rôle des origines nationales ou culturelles et des allégeances familiales dans la construction de son identité individuelle de musulman. C'est principalement par la métaphore du « chapiteau islamique » et la relation existant entre l'appartenance confessionnelle et l'appartenance nationale qu'a été développée cette quatrième forme d'identification. Finalement relevons que le religieux islamique en Suisse ne constitue pas un cas particulier mais qu'il s'inscrit dans la dynamique général du champ religieux helvétique et du religieux en modernité tardive.

R&D Performance Analysis: Case Studies on the Challenges and Promotion of the Evaluation and Measurement of R&D

Due to the intense international competition, demanding, and sophisticated customers, and diverse transforming technological change, organizations need to renew their products and services by allocating resources on research and development (R&D). Managing R&D is complex, but vital for many organizations to survive in the dynamic, turbulent environment. Thus, the increased interest among decision-makers towards finding the right performance measures for R&D is understandable. The measures or evaluation methods of R&D performance can be utilized for multiple purposes; for strategic control, for justifying the existence of R&D, for providing information and improving activities, as well as for the purposes of motivating and benchmarking. The earlier research in the field of R&D performance analysis has generally focused on either the activities and considerable factors and dimensions - e.g. strategic perspectives, purposes of measurement, levels of analysis, types of R&D or phases of R&D process - prior to the selection of R&Dperformance measures, or on proposed principles or actual implementation of theselection or design processes of R&D performance measures or measurement systems. This study aims at integrating the consideration of essential factors anddimensions of R&D performance analysis to developed selection processes of R&D measures, which have been applied in real-world organizations. The earlier models for corporate performance measurement that can be found in the literature, are to some extent adaptable also to the development of measurement systemsand selecting the measures in R&D activities. However, it is necessary to emphasize the special aspects related to the measurement of R&D performance in a way that make the development of new approaches for especially R&D performance measure selection necessary: First, the special characteristics of R&D - such as the long time lag between the inputs and outcomes, as well as the overall complexity and difficult coordination of activities - influence the R&D performance analysis problems, such as the need for more systematic, objective, balanced and multi-dimensional approaches for R&D measure selection, as well as the incompatibility of R&D measurement systems to other corporate measurement systems and vice versa. Secondly, the above-mentioned characteristics and challenges bring forth the significance of the influencing factors and dimensions that need to be recognized in order to derive the selection criteria for measures and choose the right R&D metrics, which is the most crucial step in the measurement system development process. The main purpose of this study is to support the management and control of the research and development activities of organizations by increasing the understanding of R&D performance analysis, clarifying the main factors related to the selection of R&D measures and by providing novel types of approaches and methods for systematizing the whole strategy- and business-based selection and development process of R&D indicators.The final aim of the research is to support the management in their decision making of R&D with suitable, systematically chosen measures or evaluation methods of R&D performance. Thus, the emphasis in most sub-areas of the present research has been on the promotion of the selection and development process of R&D indicators with the help of the different tools and decision support systems, i.e. the research has normative features through providing guidelines by novel types of approaches. The gathering of data and conducting case studies in metal and electronic industry companies, in the information and communications technology (ICT) sector, and in non-profit organizations helped us to formulate a comprehensive picture of the main challenges of R&D performance analysis in different organizations, which is essential, as recognition of the most importantproblem areas is a very crucial element in the constructive research approach utilized in this study. Multiple practical benefits regarding the defined problemareas could be found in the various constructed approaches presented in this dissertation: 1) the selection of R&D measures became more systematic when compared to the empirical analysis, as it was common that there were no systematic approaches utilized in the studied organizations earlier; 2) the evaluation methods or measures of R&D chosen with the help of the developed approaches can be more directly utilized in the decision-making, because of the thorough consideration of the purpose of measurement, as well as other dimensions of measurement; 3) more balance to the set of R&D measures was desired and gained throughthe holistic approaches to the selection processes; and 4) more objectivity wasgained through organizing the selection processes, as the earlier systems were considered subjective in many organizations. Scientifically, this dissertation aims to make a contribution to the present body of knowledge of R&D performance analysis by facilitating dealing with the versatility and challenges of R&D performance analysis, as well as the factors and dimensions influencing the selection of R&D performance measures, and by integrating these aspects to the developed novel types of approaches, methods and tools in the selection processes of R&D measures, applied in real-world organizations. In the whole research, facilitation of dealing with the versatility and challenges in R&D performance analysis, as well as the factors and dimensions influencing the R&D performance measure selection are strongly integrated with the constructed approaches. Thus, the research meets the above-mentioned purposes and objectives of the dissertation from the scientific as well as from the practical point of view.