Satisfaction with Life Scale among adolescents and young adults in Portugal: extending evidence of construct validity

The paper presents three empirical studies designed to extend the test of the construct validity of the Satisfaction With Life Scale (SWLS) among Portuguese students. In the first study, the responses of 461 elementary and secondary education students were submitted to a principal component analysis. A solution of one single factor was chosen, accounting for 55.7 % of the total variance, with Cronbach alpha coefficient and inter-item correlation above .70 and .20, respectively. The second study used a sample of 317 undergraduate students and registered a similar factor solution for SWLS (/pq = 0.99), which accounted for 65.6 % of the total variance (Cronbach alpha .89 and inter-item correlation above .20). A test–retest analysis registered coefficients of .70 (T2) and .77 (T3) and no significant statistically differences between T2, T3 and T1. The third study used a sample of 107 foster care youths from elementary and secondary education. Confirmatory factor analysis results indicate adequate fit indexes for the one-factor solution (v2/df = 2.70, GFI = .96, CFI = .96), which showed convergent validity, reliability and homogeneity. In conclusion, there is psychometric evidence for the one-factor structure of the SWLS in Portugal.

Rapid assessment of fruit-color selection by birds using artificial fruits at local scale in Central Amazonia

Modeling clays have been used in several ecological experiments and have proved to be an important tool to variables control. The objective of our study was to determine if fruit color in isolated and grouped displays influences the fruit selection by birds in the field using artificial fruits. Data were collected in six plots distributed homogeneously in 3 km long trails with a minimum distance of 0.5 km. We used a paired experimental design to establish our experiments, so that all treatments were available to the local bird community in each plot. Overall, red was more pecked than brown and white. Isolated red and brown displays were significantly more pecked than others display. Even though our study was conducted in small spatial scales, artificial fruits appeared to be efficient in register fruit consumption attempts by bird. Although inconclusive about selective forces that sharp the dynamics of fruit color polymorphisms and choice by frugivorous birds, our findings corroborate recent studies wherein birds showed preferences by high- over low-contrast fruit signals.

Gram-scale isolation of isobrucein B and neosergeolide from Picrolemma sprucei Hook. f.

Quassinoids neosergeolide and isobrucein B, obtained from Picrolemma sprucei, have proven in vitro antitumor, antimalarial, anthelminthic, cytotoxic, insecticide and leishmanicidal activities. There is interest in the in vivo pharmacological study of these natural compounds and their semi-synthetic derivatives, however, the quantities obtained in previous extraction processes have been shown to be a limiting factor for continuation of these studies. Herein, we describe a method for obtaining grams of these quassinoids whose purification relies only on recrystallization.

Search for low-scale gravity signatures in multi-jet final states with the ATLAS detector at s√ = 8 TeV

We search for evidence of physics beyond the Standard Model in the production of final states with multiple high transverse momentum jets, using 20.3 fb−1 of proton-proton collision data recorded by the ATLAS detector at s√ = 8 TeV. No excess of events beyond Standard Model expectations is observed, and upper limits on the visible cross-section for non-Standard Model production of multi-jet final states are set. Using a wide variety of models for black hole and string ball production and decay, the limit on the cross-section times acceptance is as low as 0.16 fb at the 95% CL for a minimum scalar sum of jet transverse momentum in the event of about 4.3 TeV. Using models for black hole and string ball production and decay, exclusion contours are determined as a function of the production mass threshold and the gravity scale. These limits can be interpreted in terms of lower-mass limits on black hole and string ball production that range from 4.6 to 6.2 TeV.

Measuring university-to-work success: development of a new scale

Purpose – The purpose of this paper is to develop a subjective multidimensional measure of early career success during university-to-work transition. Design/methodology/approach – The construct of university-to-work success (UWS) was defined in terms of intrinsic and extrinsic career outcomes, and a three-stage study was conducted to create a new scale. Findings – A preliminary set of items was developed and tested by judges. Results showed the items had good content validity. Factor analyses indicated a four-factor structure and a second-order model with subscales to assess: career insertion and satisfaction, confidence in career future, income and financial independence, and adaptation to work. Third, the authors sought to confirm the hypothesized model examining the comparative fit of the scale and two alternative models. Results showed that fits for both the first- and second-order models were acceptable. Research limitations/implications – The proposed model has sound psychometric qualities, although the validated version of the scale was not able to incorporate all constructs envisaged by the initial theoretical model. Results indicated some direction for further refinement. Practical implications – The scale could be used as a tool for self-assessment or as an outcome measure to assess the efficacy of university-to-work programs in applied settings. Originality/value – This study provides a useful single measure to assess early career success during the university-to-work transition, and might facilitate testing of causal models which could help identify factors relevant for successful transition.

Development of a methodology to incorporate risk and uncertainty in electricity power planning

Dissertação de mestrado em Engenharia Industrial

Dynamic modelling and analysis of hydraulic forces in radial blood pumps

Dissertação de mestrado integrado em Biomedical Engineering Biomaterials, Biomechanics and Rehabilitation

Numerical and experimental analysis of full scale arches reinforced with GFRP materials

In this contribution, original limit analysis numerical results are presented dealing with some reinforced masonry arches tested at the University of Minho-UMinho, PT. Twelve in-scale circular masonry arches were considered, reinforced in various ways at the intrados or at the extrados. GFRP reinforcements were applied either on undamaged or on previously damaged elements, in order to assess the role of external reinforcements even in repairing interventions. The experimental results were critically discussed at the light of limit analysis predictions, based on a 3D FE heterogeneous upper bound approach. Satisfactory agreement was found between experimental evidences and the numerical results, in terms of failure mechanisms and peak load.

Modelling tyre-road noise with data mining techniques

The research aimed to establish tyre-road noise models by using a Data Mining approach that allowed to build a predictive model and assess the importance of the tested input variables. The data modelling took into account three learning algorithms and three metrics to define the best predictive model. The variables tested included basic properties of pavement surfaces, macrotexture, megatexture, and uneven- ness and, for the first time, damping. Also, the importance of those variables was measured by using a sensitivity analysis procedure. Two types of models were set: one with basic variables and another with complex variables, such as megatexture and damping, all as a function of vehicles speed. More detailed models were additionally set by the speed level. As a result, several models with very good tyre-road noise predictive capacity were achieved. The most relevant variables were Speed, Temperature, Aggregate size, Mean Profile Depth, and Damping, which had the highest importance, even though influenced by speed. Megatexture and IRI had the lowest importance. The applicability of the models developed in this work is relevant for trucks tyre-noise prediction, represented by the AVON V4 test tyre, at the early stage of road pavements use. Therefore, the obtained models are highly useful for the design of pavements and for noise prediction by road authorities and contractors.

Modelling Z→ττ processes in ATLAS with τ-embedded Z→μμ data

This paper describes the concept, technical realisation and validation of a largely data-driven method to model events with Z→ττ decays. In Z→μμ events selected from proton-proton collision data recorded at s√=8 TeV with the ATLAS experiment at the LHC in 2012, the Z decay muons are replaced by τ leptons from simulated Z→ττ decays at the level of reconstructed tracks and calorimeter cells. The τ lepton kinematics are derived from the kinematics of the original muons. Thus, only the well-understood decays of the Z boson and τ leptons as well as the detector response to the τ decay products are obtained from simulation. All other aspects of the event, such as the Z boson and jet kinematics as well as effects from multiple interactions, are given by the actual data. This so-called τ-embedding method is particularly relevant for Higgs boson searches and analyses in ττ final states, where Z→ττ decays constitute a large irreducible background that cannot be obtained directly from data control samples.

Tradução e adaptação cultural da Barratt Impulsiveness Scale (BIS-11) para aplicação em adultos brasileiros

OBJETIVOS: Os objetivos deste estudo foram traduzir, adaptar culturalmente e verificar a equivalência literal, semântica e idiomática da Barratt Impulsiveness Scale (BIS-11), que avalia a presença de manifestações da impulsividade tendo como base o modelo teórico proposto por Ernst Barratt. MÉTODOS: Inicialmente, a versão original em inglês da BIS-11 foi traduzida para o português por seis pesquisadores bilíngues. Em seguida, foi realizada uma tradução reversa para o inglês por uma tradutora de origem norte-americana. As versões original, traduzida e retraduzida foram avaliadas por um comitê de juízes especialistas, os quais emitiram pareceres com as observações pertinentes, o que culminou em uma versão final traduzida da BIS-11. As versões original e traduzida foram aplicadas em duas amostras da população geral com proficiência na língua inglesa, a fim de investigar a equivalência literal, semântica e idiomática da versão traduzida por meio de análises de correlação. CONCLUSÃO: Os resultados das análises quantitativas indicaram que a versão final do instrumento é satisfatória.

Validity of the Brazilian Portuguese version of the bipolar spectrum diagnostic scale

OBJECTIVE: Bipolar spectrum disorders (BSDs) are prevalent and frequently unrecognized and undertreated. This report describes the development and validation of the Brazilian version of the bipolar spectrum diagnostic scale (B-BSDS), a screening instrument for bipolar disorders, in an adult psychiatric population. METHOD: 114 consecutive patients attending an outpatient psychiatric clinic completed the B-BSDS. A research psychiatrist, blind to the B-BSDS scores, interviewed patients by means of a modified version of the mood module of the Structured Clinical Interview for DSM-IV ("gold standard"). Subthreshold bipolar disorders were defined as recurrent hypomania without a major depressive episode or with fewer symptoms than those required for threshold hypomania. RESULTS: The internal consistency of the B-BSDS evaluated with Cronbach's alpha coefficient was 0.89 (95% CI; 0.86-0.91). On the basis of the modified SCID, 70 patients (61.4%) of the sample received a diagnosis of BSDs. A B-BSDS screening score of 16 or more items yielded: sensitivity of 0.79 (95% CI; 0.72-0.85), specificity of 0.77 (95% CI; 0.70-0.83), a positive predictive value of 0.85 (95% CI; 0.78-0.91) and a negative predictive value of 0.70 (95% CI; 0.63-0.75). CONCLUSION: The present data demonstrate that the B-BSDS is a valid instrument for the screening of BSDs.

Development of procedures for the design, optimization and manufacturing of customized orthopaedic and trauma implants: Geometrical/anatomical modelling from 3D medical imaging

Tese de Doutoramento (Programa Doutoral em Engenharia Biomédica)

Joint modelling of longitudinal and survival data on breast cancer

Tese de Doutoramento em Ciências (Especialidade em Matemática)

Tradução e adaptação semântica da Compulsive Buying Scale para o português brasileiro

OBJETIVO: A Compulsive Buying Scale (Escala de Compras Compulsivas), instrumento breve e de fácil aplicação, apresenta como vantagem abarcar as principais dimensões do transtorno, sendo elas a compulsão pelas compras e o comportamento impulsivo. O presente estudo tem como objetivo a adaptação transcultural para o português do Brasil da Escala de Compras Compulsivas. MÉTODOS: Para a etapa de adaptação semântica, dois psicólogos bilíngues e um tradutor fluente em português e inglês traduziram a escala de seu idioma de origem, o inglês, para o português. Em um segundo momento, foi realizada a retrotradução da escala por dois tradutores e um psicólogo. Finalmente, a escala foi aplicada em 20 participantes, de modo que pudessem ser feitos ajustes semânticos no instrumento em questão. RESULTADOS: A colaboração entre profissionais especialistas em tradução bilíngue fluentes nos idiomas inglês e português brasileiro, e psicólogos clínicos capacitados à avaliação sobre o constructo a ser mensurado, possibilitou o ajuste dos termos utilizados na versão final da escala para o idioma português, assegurando adequação semântica do instrumento. Assim, todos os itens obtiveram aprovação superior a 90% em sua aplicação experimental. CONCLUSÃO: A versão da escala de compras compulsivas adaptada para o idioma português foi elaborada com êxito.