Influence of microwave disinfection on the dimensional stability of intact and relined acrylic resin denture bases

Statement of problem. Microwave irradiation has been suggested as a method to disinfect denture bases. However, the effect of microwave heating on the dimensional stability of the relined denture bases is unknown.Purpose. The purpose of this study was to evaluate the dimensional stability of intact and relined acrylic resin denture bases after microwave disinfection.Material and methods. A standard brass cast simulating an edentulous maxillary arch was machined and used to fabricate 2- and 4-mm-thick denture bases (n=200), which were processed with heat-polymerized acrylic resin (Lucitone 550). The 2-mm thick-specimens (n=160) were relined with 2 mm of autopolymerizing resin (Tokuso Rebase Fast, Ufi Gel Hard, Kooliner, or New Truliner). Distances between 5 removable pins on the standard brass cast were measured with a Nikon optical comparator, and the area (mm(2)) formed by the distance between 5 pins was calculated and served as baseline. During fabrication, the pins were transferred to the intaglio surface of the specimens. Differences between the baseline area and those subsequently determined for the specimens were used to calculate the percent dimensional changes. The intact and relined denture bases were divided into 4 groups (n=10) and evaluated after: polymerization (control group P); 1 cycle of microwave disinfection (MW); daily microwave disinfection for 7 days (control group MW7); water storage for 7 days (WS7). Microwave irradiation was performed for 6 minutes at 650 W. Data were analyzed using 2-way ANOVA followed by Tukey's test (alpha=.05).Results. Intact specimens and those relined with Kooliner and New Truliner showed increased shrinkage after 1 (P=.05, .018, and .001, respectively) and 7 (P <.001, .003, and <.001, respectively) cycles of microwave disinfection. With the exception of specimens relined with Kooliner, intact specimens showed greater shrinkage than the relined specimens after 7 cycles of microwave disinfection.Conclusions. Microwave disinfection produced increased shrinkage of intact specimens and those relined with New Truliner and Kooliner.

Influence of thermal and mechanical stresses on the strength of intact and relined denture bases

Statement of problem. Denture bases may become increasingly weaker as a result of thermal stress and flexural cyclic loading. Information regarding this potential problem and its relationship to the denture base reline is limited.Purpose. This study evaluated the influence of thermal and mechanical stresses on the strength of intact and relined denture bases.Material and methods. Twenty-eight microwave-polymerized (Acron MC) intact denture bases were prepared in the shape of a 3-mm-thick maxillary denture. Additionally, fifty-six 2-mm-thick denture bases were relined with 1 mm of autopolymerizing resin (Tokuyama Rebase Fast II or New Truliner) (n = 28). Intact and relined specimens were divided into 4 groups (n = 7) as follows: without stress (control); a mechanical stress at 0.8 Hz for 10,000 cycles; 5000 thermal cycles between 5 degrees C and 55 degrees C; or a combination thermo-mechanical stress. The specimens were vertically loaded in compression with a rounded rod at 5 mm/min until failure, using a universal testing machine. Data on maximum fracture load (N), deflection at fracture (%), and fracture energy (N-mm) were analyzed by 2-way analysis of variance and Student-Newman-Keuls tests (alpha = .05).Results. The strength of the denture bases relined with New Truliner was not significantly affected by any of the experimental conditions, but comparing the control groups, New Truliner exhibited the lowest maximum fracture load values. The maximum fracture load of intact denture bases (P = .002) and those relined with Tokuyama Rebase Fast II (P = .01) showed a significant decrease after thermal stress. Additionally, cyclic loading significantly decreased the maximum fracture load (P < .001), deflection at fracture (P = .025), and fracture energy (P < .001) of intact denture bases and those relined with Tokuyama Rebase (P values of .002, .039, and .001, respectively).Conclusion. Thermal and mechanical stresses exert deleterious effects on the strength of intact and/or relined denture bases, which vary according to the relining material used.

Effect of disinfection by microwave irradiation on the strength of intact and relined denture bases and the water sorption and solubility of denture base and reline materials

This study evaluated the influence of microwave disinfection on the strength of intact and relined denture bases. Water sorption and solubility were also evaluated. A heat-polymerized acrylic resin (Lucitone 550) was used to construct 4-mm-thick (n = 40) and 2-mm-thick (n = 160) denture bases. Denture bases (2mm) were relined with an autopolymerizing resin (Tokuso Rebase Fast, Ufi Gel Hard, Kooliner, or New Truliner). Specimens were divided into four groups (n = 10): without treatment, one or seven cycles of microwave disinfection (650 W for 6 min), and water storage at 37 degrees C for 7 days. Specimens were vertically loaded (5 mm/min) until failure. Disc-shaped specimens (50 min x 0.5 mm) were fabricated (n = 10) to evaluate water sorption and solubility. Data on maximum fracture load (N), deflection (%), and solubility (%) were analyzed by two-way analysis of variance and Student-Newman-Keuls tests (alpha = 0.05). One cycle of microwave disinfection decreased the deflection at fracture and fracture energy of Tokuso Rebase Fast and New Truliner specimens. The strength of denture bases microwaved daily for 7 days was similar to the strength of those immersed in water for 7 days. Microwave disinfection increased the water sorption of all materials and affected the solubility of the reline materials. (C) 2007 Wiley Periodicals, Inc.

Physicochemical properties of endodontic sealers of different bases

Objective: To assess the setting time (ST), flow (FL), radiopacity (RD), solubility (SB) and dimensional change following setting (DC) of different sealers (AH Plus (R), Polifil, Apexit Plus (R), Sealapex (R), Endomethasone (R) and Endofill (R)) according to American National Standards Institute/American Dental Association (ANSI/ADA) Specification 57. Material and methods: Five samples of each material were used for each test. For ST, cast rings were filled with sealers and tested with a Gillmore needle. For FL, the sealer was placed on a glass plate. After 180 s, another plate with 20 g and a load of 100 g were applied on the material, and the diameters of the discs formed were measured. In RD, circular molds were filled with the sealers, radiographed and analyzed using Digora software. For SB, circular molds were filled with the sealers, a nylon thread was placed inside the material and another glass plate was positioned on the set, pressed and stored at 37 degrees C. Samples were weighed, placed in water, dried and reweighed. The water used for SB was analyzed by atomic absorption spectrometry. For DC, circular molds were filled with the sealers, covered by glass plates and stored at 37 degrees C. Samples were measured and stored in water for 30 days. After this period, they were dryed and measured again. Results: Regarding ST, AH Plus (R), Apexit (R) and Endofil (R) sealers are in accordance with ANSI/ADA standards. Endomethasone's manufacturer did not mention the ST; Polifil is an experimental sealer and Sealapex (R) did not set. Considering RD, SB and DC, all sealers were in accordance with ANSI/ADA. The spectrometric analysis showed that a significant amount of K+ and Zn2(+) ions was released from Apexit Plus (R) and Endofill (R), respectively. Conclusion: Except for DC, all other physicochemical properties of the tested sealers conformed to ANSI/ADA requirements.

A systematic study of transfection efficiency and cytotoxicity in HeLa cells using iron oxide nanoparticles prepared with organic and inorganic bases

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Vibrational-rotational analysis of the Hulthen potential using hydrogenic eigenfunction bases

Hulthen's potential admits analytical solutions for its energy eigenvalues and eigenfunctions corresponding to zero orbital angular momentum stales, but its non zero angular momentum states are not equally known. This work presents a vibrational-rotational analy sis of Hulthen's potential using hydrogenic eigenfunction bases, which may be of interest and useful to students of quantum mechanics at different stages.

A Nova Lei de Diretrizes e Bases e a formação de professores para a educação básica

Este artigo mostra os dispositivos legais inclusos na Nova Lei de Diretrizes e Bases da Educação Nacional (LDB), visando identificar, compreender e avaliar a intencionalidade de suas propostas para a adoção de posturas pertinentes. Contém observações que possam ser consideradas nos estudos e reflexões sobre os rumos dos cursos e programas de formação de professores para a educação básica.

Spectroscopic characterization of schiff base-copper complexes immobilized in smectite clays

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Somente um deve vencer: as bases de recrutamento dos candidatos à Prefeitura das capitais brasileiras em 2008

Não é segredo para os estudiosos e é reconhecido pelos atores envolvidos no jogo político que o Prefeito desempenha importantes atividades, podendo influenciar o dia-a-dia da população, a relação com outras esferas de governo e as eleições gerais. Tomando como universo empírico os candidatos ao cargo de Prefeito das capitais brasileiras em 2008, procuramos identificar e analisar as bases de recrutamento desses concorrentes ao principal posto político do município. As interpretações correntes na literatura concentram-se sobre os vencedores da disputa eleitoral, deixando de lado os derrotados. O que os vencedores têm que os derrotados não têm? Seria o perfil dos vencedores diferente daquele encontrado no grupo dos derrotados? Com o propósito de oferecer uma contribuição aos estudos das bases de recrutamento dos membros pertencentes às elites locais, o texto está organizado em uma única seção, onde vamos discutir três dimensões: (i) gênero, faixa etária e naturalidade; (ii) nível de instrução, grupo profissional e mandato executivo e (iii) gastos com campanha e tamanho do patrimônio. Essas características podem ajudar a construir um perfil sociopolítico dos membros pertencentes aos grupos dos vencedores e dos derrotados nas eleições municipais de 2008 para o cargo de Prefeito das capitais brasileiras. Além disso, o estudo desses atributos pode indicar quais predominaram na disputa eleitoral, isto é, quais deles podem mostrar as características que circundam o processo seletivo dos integrantes do distinto grupo político.

Bases epidemiológicas para análise das más oclusões morfológicas como fatores de risco no desenvolvimento das desordens temporomandibulares de origem articular

Dentre as pesquisas empreendidas no campo da epidemiologia, um grupo específico aborda patologias de etiologia desconhecida ou não totalmente compreendidas. É dentro deste grupo que estão situadas as desordens temporomandibulares (DTM). Três estratégias observacionais básicas têm sido utilizadas para abordar o papel etiológico da má oclusão no desenvolvimento das DTM, dentro do repertório epidemiológico. São elas: estudos do tipo transversal, estudos de caso controle e estudos de coorte. Alguns experimentos clínicos são realizados com base na remoção do fator etiológico suspeito. Com base em uma revisão estruturada da literatura, a partir da metodologia empregada nos estudos selecionados, podemos concluir que a definição dos possíveis fatores etiológicos relacionados a subgrupos específicos de DTM é fundamental para que o papel das más oclusões no desenvolvimento destas desordens, embora pareça pequeno quando baseado nas evidências disponíveis, não seja subestimado. Pode ser útil a caracterização de uma oclusão normal como aquela associada como o menor risco para o desenvolvimento de problemas de DTM, mas é provavelmente inapropriada a aplicação destes parâmetros para reverter um problema intra-capsular já estabelecido. O conceito de uma oclusão de baixo fator de risco implicaria em um pequeno desvio entre RC e MIH, pequeno transpasse horizontal, transpasse vertical positivo e ausência de mordida cruzada posterior. Este conceito é compatível com o conceito de oclusão normal defendido por décadas, embora uma variação do normal ao invés de um critério absoluto deva ser permitida. Embora provavelmente seja prudente estabelecer metas morfológicas terapêuticas que busquem o que é observado em oclusões não tratadas julgadas normais ou ideais, o estabelecimento de uma oclusão que alcance todos os critérios gnatológicos, por meio de tratamento ortodôntico, talvez seja impossível e provavelmente desnecessário.

Análise da qualidade de adesão de diferentes bases de braquetes metálicos

Diante das diferenças existentes nas características das bases dos braquetes usados atualmente, objetivou-se neste trabalho comparar entre si três tipos de bases de braquetes metálicos (Monobloc, Equilibrium e Dynalock). Foram utilizados 36 pré-molares humanos, divididos em 3 grupos de 12 dentes. Os dentes foram incluídos em troquéis com gesso pedra tipo IV e posicionados com suas faces vestibulares perpendiculares à base do troquel. Todos os braquetes foram colados com o compósito Concise Ortodôntico e submetidos ao ensaio de cisalhamento em uma Máquina Universal com uma velocidade de 0,5 mm por minuto. O braquete Monobloc obteve o maior valor médio de resistência adesiva (x = 28,19 Kgf/cm²), sendo superior estatisticamente aos braquetes Equilibrium (x = 18,07 Kgf/cm²) e Dynalock (x = 18,24 Kgf/cm²). em relação ao ARI (Índice de Remanescente Resinoso), não foi encontrada diferença estatística entre os braquetes testados.

Formação de populações-bases de aves para corte. I. Avaliação de melhoramento genético disponível no mercado

The present work aimed at studying the effect of five doses of zinc (0, 1.0, 2.0, 3.0 and 4.0 ppm) in three levels of soil correction. A Dark-Red Latosol, clay texture, oryginally recovered by cerrado vegetation was used. Soybean was used as test plant, cultivated in green-house conditions. The zinc dose affected dry matter production of aerial parts and grain only in the treatments that received the corrective. The concentration of the element in the soil increased linearly with the dose application, and the critical levels in soil (90% of the maximal yield) were between 0.27 and 0.37 ppm of zinc in the treatments with the equivalent to 2.0 t/ha and 3.2 t/ha of lime, respectively.