The phase diagram of the mercury-indium alloy system

The mercury-indium phase diagram has been investigated over the whole composition range from -78°C to the melting point of indium, using thermal analysis, X-ray and superconductivity techniques. This is believed to be the first application of superconductivity measurements to phase diagram investigations. A compound, HgIn, of very limited range of composition, melts congruently at -19.3°C; and gives rise to eutectics at 61.5 at. % indium and -31°C, and at 34.7% indium and -37.2°C. The β phase extends from 2.5 to 19.1 % indium and has a maximum melting point of -14.2°C at 14.2% indium. It forms a peritectic or eutectic at a temperature indistinguishable from the melting point of pure mercury with a solid solution in mercury containing some, but less than 0.3%, indium. A transition from face-centred tetragonal to face-centred cubic in the indium-rich solid solutions at about 93% indium gives rise to a peritectic at 108°C. The solubility of mercury in this face-centred cubic phase falls from about 22% at-31°C to 13% at -78°C. © 1963.

Proteomics in the assessment of the therapeutic response of antineoplastic drugs: strategies and practical applications

Uncovering mechanisms of unknown pathological mechanisms and body response to applied medication are the drive forces toward personalized medicine. In this post-genomic era, all eyes are tuned to proteomic field, searching for the answers and explanations by investigating the final physiological functional units – proteins and their proteoforms. Development of cutting-edge mass spectrometric technologies and powerful bioinformatics tools, allowed life-science community mining of disease-specific proteins as biomarkers, which are often hidden by high complexity of the samples and/or small abundance. Nowadays, there are several proteomics-based approaches to study the proteome. This chapter focuses on gold standard proteomics strategies and related issues towards candidate biomarker discovery, which may have diagnostic/prognostic as well as mechanistic utility.

Improvement of the yeast slide culture technique

Este trabalho tem como objetivo melhorar a técnica de cultura em lâmina para ser usada na avaliação da viabilidade de leveduras sob diferentes condições fisiológicas. Inicialmente, foram otimizadas as condições ideais para o cultivo em lâmina de uma estirpe laboratorial (BY4741) e de uma estirpe industrial (NCYC 1214) da levedura Saccharomyces cerevisiae. O melhor protocolo foi obtido utilizando: YEPD agar com uma espessura de cerca de 2 mm; 20 μL de uma suspensão de 1 x 105 células/mL para a estirpe BY4741 ou de 5 x 104 células/mL para a estirpe NCYC 1214; uma câmara de humedecimento com 100 μL de água desionizada e um tempo de incubação de 24 h, a 25 ° C. Com o objetivo de facilitar a contagem das microcolónias, foi adicionado um corante (calcofluor white, CFW) ao meio YEPD agar. Ensaios preliminares, em YEPD líquido, contendo diferentes concentrações de CFW, permitiram verificar que o corante, até 5,0 μg/L, não inibe o crescimento da levedura. Uma concentração de 2,5 μg/L de CFW permitiu a coloração da parede das leveduras, não se observando células com morfologia alterada, sendo esta a concentração de CFW selecionado nos estudos subsequentes. A técnica de cultura em lâmina, com ou sem CFW, foi aplicada para avaliar a viabilidade de células saudáveis (células em fase exponencial de crescimento), células submetidas a stress de etanol [células expostas a 20% (v/v) de etanol, a 25 ºC, durante 2 h] e células envelhecidas (células incubadas em água, a 25 ° C, durante 48 h), da estirpe laboratorial. A percentagem de células viáveis não foi significativamente diferente entre as duas técnicas (com ou sem CFW), após uma incubação de 24 horas. Finalmente, a técnica de cultura de lâmina, contendo CFW, foi comparada com duas técnicas habitualmente usadas na indústria cervejeira: fermentação de curta duração e determinação da percentagem de células gemuladas. Os resultados obtidos através da técnica de cultura de lâmina, desenvolvida, seguem um padrão similar aos obtidos nos ensaios de fermentação de curta duração e aos da determinação da percentagem de células gemuladas. Os resultados obtidos sugerem que a técnica de cultura em lâmina, combinada com CFW, parece ser uma alternativa, fácil, rápida (em 24 h) e reprodutível, relativamente ao método convencional (técnica de plaqueamento), para a avaliação da viabilidade de células de levedura. Deverá ser realizado trabalho adicional a fim de validar o método com estirpes industriais.

A series of trials in the UK as part of the Ofcom TV white spaces pilot

“Copyright © [2014] IEEE. Reprinted from 1st International Workshop on Cognitive Cellular Systems 2014 . ISBN: 978-1-4799-4139-1 .This material is posted here with permission of the IEEE. Internal or personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution must be obtained from the IEEE by writing to pubs-permissions@ieee.org. By choosing to view this document, you agree to all provisions of the copyright laws protecting it.”

A Comparative Study on the Homeroom Teachers’ Perception of the School guidance in Korea and Finland

This study has four major purposes. First, it compares school guidance of homeroom teachers in Korea and Finland, in order to understand the reality of education, based on the teachers’ perceptions. Secondly, it also considers the topic within its historical, social, and cultural backgrounds, from a critical standpoint. Thirdly, it investigates the direction of the improvement of school guidance, based on the analysis of similarities and differences between Korea and Finland, with regards to the meaning, practice, and environmental factors of the school guidance. Lastly, the influential factors surrounding the school guidance are noted by analysing empirical data from a microscopic approach, and extending the understanding of it into a social context. As for the methods, it employs thematic analysis approach through 10 homeroom teacher interviews in the lower secondary schools. As a result, firstly, the teachers in both countries assumed similarly, that the role of the teacher was not only to teach the subject, but also to care about every aspects of the students’ development in their school life. In addition, they accepted the fact that school guidance became more significant. However, the school guidance became the top priority for the Korean teachers, while teaching subject is the main task for the Finnish teachers. Secondly, the homeroom teachers in both countries hoped to have a better working environment, to perform school guidance concerning education budget for the resources of school guidance, tight curriculum, and increasing the teachers’ tasks. Thirdly, the school guidance in Korea seemed to be influenced by social expectation and government demand, whereas, the Finnish teachers considered school guidance in more aspects of adjustment and academic motivation, rather than resolving the social problems. Fourthly, the Korean teachers perceived that the trust and respect from the society and home became weakened, also expressing doubts about the educational policies and the attitude of the government with regards to school guidance. On the other hand, the Finnish teachers believed that they were trusted and respected by the society. However, blurred lines in the roles and accountability between the homeroom teachers, home, and the society were also controversial among the teachers in both countries. To sum up, Finland needs to ameliorate the system and conditions for school guidance of the homeroom teachers. The consensus on the role and tasks of Finnish homeroom teachers for school guidance seem to be also necessary. Meanwhile, Korea should improve the social system and social consciousness of the teacher, school guidance, and schooling, preceding the reform of the education system or conditions.

A pilot study on the productivity and behavior of the gestating sow housed in a flex stall

Animal welfare is a controversial topic in modern animal agriculture, partly because it generates interest from both the scientific community and the general public. The housing of gestating sows, particularly individual housing, is one of the most critical concerns in farm animal welfare. We hypothesize that the physical size of the standard gestation stall may limit movement and evoke demands and challenges on the sow to affect the physiological and psychological well-being of the individually housed sow. Thus, improvements in the design of the individual gestation stall system that allow more freedom to move, such as increasing stall width or designing a stall that could accommodate the changing size of the pregnant sow, may improve sow welfare. The objective of this pilot study was to evaluate the effects of a width adjustable stall (FLEX) on productivity and behavior of dry sows. The experiment consisted of 3 replications (block 1, n=4 sows; block 2, n=4 sows; block 3, n=8 sows), and multi-parious sows were allotted to either a FLEX stall or standard gestation stall for 1 gestation period. Sow mid-girth (top of the back to bottom of the udder) was measured 5-6 times throughout gestation to determine the best time points for FLEX stall width expansions. FLEX stall width was adjusted according to mid-girth measurements, and expanded to achieve an additional 2 cm of space between the bottom of the sow’s udder and floor of the stall so that sows could lie in full lateral recumbency without touching the sides of the stall. Productivity data recorded included: sow body weight (BW) and BW gain, number of piglets born and born alive, proportions of piglets stillborn, mummified, lost between birth and weaning, and weaned, and litter and mean piglet birth BW, weaning BW, and average BW gain from birth-to-weaning. Lesions were recorded on d 21 and d 111 of gestation. Sub-pilot behavior data were observed and registered for replicate 1 sows using continuous video-records for the l2 hour lights on period (period 1, 0600-1000; period 2, 1000-1400; period 3, 1400-1800) prior FLEX stall adjustment and 12 hour lights on period post adjustment on d 21, 22, 23, 43, 44, 45, 93, 94, 95. A randomized complete block design with a 2 × 2 factorial arrangement for treatments was used to analyze sow productivity and performance traits. Data were analyzed using the Mixed Models procedure of SAS. A preliminary analysis of data means and numerical trends was used to analyze sow behavior measurements. Sows housed in a FLEX stall had more (P < 0.05) total born and a tendency for more piglets born alive (P = 0.06) than sows housed in a standard stall. Sow body weight also tended to be higher (P = 0.06) for sows housed in a FLEX stall compared to sows housed in a standard stall. There were numerical trends for mean durations of sit, lay, lay (OUT), and eat behaviors to be greater for sows housed in a FLEX stall compared with sows housed in a standard stall. The mean duration of lay (IN) behavior tended to be numerically less for sows housed in a FLEX stall compared with sows housed in a standard stall. There were numerical trends for the mean durations of stand and drink behaviors to be greater for sows housed in a standard stall compared with sows housed in a FLEX stall. The mean frequencies of postural changes and mean durations of oral-nasal-facial and sham-chew behaviors were numerically similar between types of gestation stall. Mean durations and numerical trends indicate that time of day influenced all of the behaviors assessed in this study. The results of this pilot study indicate that the adjustable FLEX stall may affect sow productivity and behavior differently than the standard gestation stall, and thus potentially improve sow well-being. Future research should continue to compare the new FLEX stall design to current housing systems in use and examine physiological traits and immune status in addition to behavioral and productivity traits to assess the effects that this housing system has on the overall welfare of the gestating sow.

Evaluation of the reaction of watermelon parent and F1 plants to Meloidogyne enterolobii.

The aim of this study was to evaluate the performance of progenies from Citrullus lanatus var. lanatus (cultivated watermelons) when crossed with progenies from C. lanatus var. citroides (fodder watermelon with a historic of resistance to the nematode Meloidogyne enterolobii). The parents and their F1s were evaluated for resistance to this nematode. In the initial stages of eleven treatments, watermelon seedlings plantlets were transplanted to plastic bags of six kilograms once the first leaves developed. Ten inoculated plants with 5,200 eggs in the soil near the stem of the plant and four non-inoculated ones were used in each treatment, in a complete block design. Sixty-two days after sowing, the following characteristics were evaluated: the length of the aerial part of the plant (LAP, in m), fresh mass of the aerial part (FMAP, in g), root fresh mass (RFM, in g), egg number (EN) and reproduction factor (RF). A comparison between the averages of inoculated and non-inoculated plants was performed using Scott-Knott test at 5% and the diallelic analysis was performed using the GENES program. The morphological characteristics did not allow for the identification of the parent plants or the F1s with respect to nematode resistance, but the variables EN and RF were useful for such identification. The analyses of the general and specific combining abilities indicate highly significant effects with respect to this resistance, showing additive gene effects as well as dominance and epistatic gene effects, allowing for identification of parents and F1s that can be used in watermelon breeding programs to improve resistance to the M. enterolobii.

Indium-Mediated Cleavage of the Trityl Group from Protected 1H-Tetrazoles

On treatment with indium metal in MeOH–THF, trityl groups undergo reductive removal from 1H-protected tetrazoles (including aliphatic, aromatic, and heteroaromatic substituents), affording the corresponding free tetrazoles in excellent yields, without any decomposition of the tetrazole ring or reduction of any other group.

HOG CHAINS AND MARK TWAINS: A STUDY OF LABOR HISTORY, ARCHAEOLOGY, AND INDUSTRIAL ETHNOGRAPHY OF THE STEAMBOAT ERA OF THE MONONGAHELA VALLEY 1811-1950

This dissertation examines a unique working class in the United States, the men and women who worked on the steamboats from the Industrial Revolution until the demise of steam-powered boats in the mid-20th century. The steamboat was the beginning of a technological system that was developed in America and used in such great numbers that it made the rapid population of the Trans-Appalachian West possible. The steamboat was forever romanticized by images of the antebellum South or the quick wit of Samuel Clemens and his sentimental book, Life on the Mississippi. The imagination swirls with thoughts of boats, bleach white, slowly churning the calm waters of some Spanish moss covered river. The reality of the boats and the experience of those who worked on them has been lost in this nostalgic vision. This research details the history of the western steamboat in the Monongahela Valley, the birthplace of the commercial steamboat industry. The first part of this dissertation examines the literature of authors in the field of labor history and Industrial Archaeology to place this work into the larger context of published literature. The second builds a framework for understanding the various eras that the steamboat went through both in terms of technological change, but also the change the workers experienced as their identity as a working class was being shaped. The third part details the excavations of two steamboat captains houses, those of Captain James Gormley and Captain Michael A. Cox. Both men represented a time in which the steamboat was in an era of transition. Excavations at their homes yield clues to their class status and how integrated they were in the local community. The fourth part of this study documents the oral histories of steamboat workers, both men and women, and their experience on the boats and on the river. Their rapidly declining population of those who lived and worked on the boats gives urgency for their lives to be documented. Finally, this study concludes with a synthesis of how worker identity solidified in the face of technological, socio-economic, and ideological change especially during their push for unionization and the introduction of the diesel towboat.

Investigating the Roles and Requirements, Manifestations and Management of Metadata in the Creation of Reliable and Preservation of Authentic Electronic Entities Created by Dynamic, Interactive and Experiential Systems: Report on the Work and Findings of the Interpares 2 Description Cross Domain Group

Metadata that is associated with either an information system or an information object for purposes of description, administration, legal requirements, technical functionality, use and usage, and preservation, plays a critical role in ensuring the creation, management, preservation and use and re-use of trustworthymaterials, including records. Recordkeeping1 metadata, of which one key type is archival description, plays a particularly important role in documenting the reliability and authenticity of records and recordkeeping systemsas well as the various contexts (legal-administrative, provenancial, procedural, documentary, and technical) within which records are created and kept as they move across space and time. In the digital environment, metadata is also the means by which it is possible to identify how record components – those constituent aspects of a digital record that may be managed, stored and used separately by the creator or the preserver – can be reassembled to generate an authentic copy of a record or reformulated per a user’s request as a customized output package.Issues relating to the creation, capture, management and preservation of adequate metadata are, therefore, integral to any research study addressing the reliability and authenticity of digital entities, regardless of the community, sector or institution within which they are being created. The InterPARES 2 Description Cross-Domain Group (DCD) examined the conceptualization, definitions, roles, and current functionality of metadata and archival description in terms of requirements generated by InterPARES 12. Because of the needs to communicate the work of InterPARES in a meaningful way across not only other disciplines, but also different archival traditions; to interface with, evaluate and inform existing standards, practices and other research projects; and to ensure interoperability across the three focus areas of InterPARES2, the Description Cross-Domain also addressed its research goals with reference to wider thinking about and developments in recordkeeping and metadata. InterPARES2 addressed not only records, however, but a range of digital information objects (referred to as “entities” by InterPARES 2, but not to be confused with the term “entities” as used in metadata and database applications) that are the products and by-products of government, scientific and artistic activities that are carried out using dynamic, interactive or experiential digital systems. The nature of these entities was determined through a diplomatic analysis undertaken as part of extensive case studies of digital systems that were conducted by the InterPARES 2 Focus Groups. This diplomatic analysis established whether the entities identified during the case studies were records, non-records that nevertheless raised important concerns relating to reliability and authenticity, or “potential records.” To be determined to be records, the entities had to meet the criteria outlined by archival theory – they had to have a fixed documentary format and stable content. It was not sufficient that they be considered to be or treated as records by the creator. “Potential records” is a new construct that indicates that a digital system has the potential to create records upon demand, but does not actually fix and set aside records in the normal course of business. The work of the Description Cross-Domain Group, therefore, addresses the metadata needs for all three categories of entities.Finally, since “metadata” as a term is used today so ubiquitously and in so many different ways by different communities, that it is in peril of losing any specificity, part of the work of the DCD sought to name and type categories of metadata. It also addressed incentives for creators to generate appropriate metadata, as well as issues associated with the retention, maintenance and eventual disposition of the metadata that aggregates around digital entities over time.

Villains of the piece

Welcome to the first of what will be a regular review essay on films about journalism, covering recent releases as well as looking back at established classics and under-rated obscurities.

IODP Expedition 339 in the Gulf of Cadiz and off West Iberia : decoding the environmental significance of the Mediterranean outflow water and its global influence

IODP Expedition 339 drilled five sites in the Gulf of Cadiz and two off the west Iberian margin (November 2011 to January 2012), and recovered 5.5 km of sediment cores with an average recovery of 86.4%. The Gulf of Cadiz was targeted for drilling as a key location for the investigation of Mediterranean outflow water (MOW) through the Gibraltar Gateway and its influence on global circulation and climate. It is also a prime area for understanding the effects of tectonic activity on evolution of the Gibraltar Gateway and on margin sedimentation. We penetrated into the Miocene at two different sites and established a strong signal of MOW in the sedimentary record of the Gulf of Cadiz, following the opening of the Gibraltar Gateway. Preliminary results show the initiation of contourite deposition at 4.2–4.5 Ma, although subsequent research will establish whether this dates the onset of MOW. The Pliocene succession, penetrated at four sites, shows low bottom current activity linked with a weak MOW. Significant widespread unconformities, present in all sites but with hiatuses of variable duration, are interpreted as a signal of intensified MOW, coupled with flow confinement. The Quaternary succession shows a much more pronounced phase of contourite drift development, with two periods of MOW intensification separated by a widespread unconformity. Following this, the final phase of drift evolution established the contourite depositional system (CDS) architecture we see today. There is a significant climate control on this evolution of MOW and bottom-current activity. However, from the closure of the Atlantic–Mediterranean gateways in Spain and Morocco just over 6 Ma and the opening of the Gibraltar Gateway at 5.3 Ma, there has been an even stronger tectonic control on margin development, downslope sediment transport and contourite drift evolution. The Gulf of Cadiz is the world's premier contourite laboratory and thus presents an ideal testing ground for the contourite paradigm. Further study of these contourites will allow us to resolve outstanding issues related to depositional processes, drift budgets, and recognition of fossil contourites in the ancient record on shore. The expedition also verified an enormous quantity and extensive distribution of contourite sands that are clean and well sorted. These represent a relatively untapped and important exploration target for potential oil and gas reservoirs.

Comparison of eight published static finite element models of the intact lumbar spine : predictive power of models improves when combined together

Finite element (FE) model studies have made important contributions to our understanding of functional biomechanics of the lumbar spine. However, if a model is used to answer clinical and biomechanical questions over a certain population, their inherently large inter-subject variability has to be considered. Current FE model studies, however, generally account only for a single distinct spinal geometry with one set of material properties. This raises questions concerning their predictive power, their range of results and on their agreement with in vitro and in vivo values. Eight well-established FE models of the lumbar spine (L1-5) of different research centres around the globe were subjected to pure and combined loading modes and compared to in vitro and in vivo measurements for intervertebral rotations, disc pressures and facet joint forces. Under pure moment loading, the predicted L1-5 rotations of almost all models fell within the reported in vitro ranges, and their median values differed on average by only 2° for flexion-extension, 1° for lateral bending and 5° for axial rotation. Predicted median facet joint forces and disc pressures were also in good agreement with published median in vitro values. However, the ranges of predictions were larger and exceeded those reported in vitro, especially for the facet joint forces. For all combined loading modes, except for flexion, predicted median segmental intervertebral rotations and disc pressures were in good agreement with measured in vivo values. In light of high inter-subject variability, the generalization of results of a single model to a population remains a concern. This study demonstrated that the pooled median of individual model results, similar to a probabilistic approach, can be used as an improved predictive tool in order to estimate the response of the lumbar spine.

Crystal structure of poly[[di-mu2-aqua-aquasodium] 4-amino-3,5,6-trichloropyridine-2-carboxylate trihydrate], the sodium salt of the herbicide picloram

In the structure of the title complex [[Na(H2O)3]+ (C6H2Cl3N2O2)-^ . 3(H2O)]n, the Na salt of the herbicide picloram, the cation is a polymeric chain structure, based on doubly water-bridged NaO5 trigonal bipyramidal complex units which have in addition, a singly-bonded monodentate water molecule. Each of the bridges within the chain which lies along the a cell direction is centrosymmetric with Na...Na separations of 3.4807(16) and 3.5109(16)Ang. In the crystal, there are three water molecules of solvation and these, as well as the coordinated water molecules and the amino group of the 4-amino-3,5,6-trichloropicolinate anion are involved in extensive inter-species hydrogen-bonding interactions with carboxyl and water O-atoms as well as the pyridine N-atom. Among these association is a centrosymmetric cyclic tetra-water R4/4(8) ring , resulting in an overall three-dimensional structure.