Licenshantering av programvaror i enkommunal verksamhet : En fallstudie över licenshanteringen i Falu kommun

Forskningen visar att förändringar av informationsteknologin och en ökande anskaffning av nya programvaror har lett till underliggande problem som kan drabba heterogena programvarulicensmiljöer och stora organisationer. Underliggande problem i den stora kontexten är mjukvaruhantering. Licenshantering av programvaror är just en förgrening av det stora problemet. Stora organisationer som en kommunal verksamhet är drabbad av det här underliggande problemet på grund av komplexitet hos organisationens miljö. Att tillämpa förändringar i området programvarulicens är omöjligt utan att göra förändringar i hela den organisationsprocess som följer med det. Fallstudiens uppdrag är ett nytt omfattande område kring licenshantering av programvaror som kan vara väldigt lärorikt och en bra erfarenhet att ta del av. Uppsatsen beskriver hur en kommunal verksamhets licenshantering av programvaror ser ut och de problem som finns med den nuvarande licenshanteringsprocessen. Förarbetet med en litteraturstudie tillsammans med datagenereringsmetoderna intervjuer, dokumentstudier och observationer används för att studera fallet på djupet. Målet är att kunna ta fram de nuvarande problem som finns, analysera dem och ge rekommendation för åtgärder som det studerade fallobjektet, Falu Kommuns IT-kontor, kan använda. En rekommendation för en tydlig licenshanteringsprocessmodell anses vara ett bra akademiskt bidrag eftersom problemet med licenshanteringen av programvaror är ett generellt problem. Uppsatsens resultat är en processmodell om licenshantering av programvaror för organisationer med IT-tjänstkunder. Det är en generisk lösning som skulle kunna användas av andra kommunverksamheter och liknande organisationer.

En jämförelse av molnbaserade realtidsanalystjänster : Skillnader i användbarhet mellan multi-tenant och single-tenant arkitekturer

Internet of Things är ett samlingsbegrepp för den utveckling som innebär att olika typer av enheter kan förses med sensorer och datachip som är uppkopplade mot internet. En ökad mängd data innebär en ökad förfrågan på lösningar som kan lagra, spåra, analysera och bearbeta data. Ett sätt att möta denna förfrågan är att använda sig av molnbaserade realtidsanalystjänster. Multi-tenant och single-tenant är två typer av arkitekturer för molnbaserade realtidsanalystjänster som kan användas för att lösa problemen med hanteringen av de ökade datamängderna. Dessa arkitekturer skiljer sig åt när det gäller komplexitet i utvecklingen. I detta arbete representerar Azure Stream Analytics en multi-tenant arkitektur och HDInsight/Storm representerar en single-tenant arkitektur. För att kunna göra en jämförelse av molnbaserade realtidsanalystjänster med olika arkitekturer, har vi valt att använda oss av användbarhetskriterierna: effektivitet, ändamålsenlighet och användarnöjdhet. Vi kom fram till att vi ville ha svar på följande frågor relaterade till ovannämnda tre användbarhetskriterier: • Vilka likheter och skillnader kan vi se i utvecklingstider? • Kan vi identifiera skillnader i funktionalitet? • Hur upplever utvecklare de olika analystjänsterna? Vi har använt en design and creation strategi för att utveckla två Proof of Concept prototyper och samlat in data genom att använda flera datainsamlingsmetoder. Proof of Concept prototyperna inkluderade två artefakter, en för Azure Stream Analytics och en för HDInsight/Storm. Vi utvärderade dessa genom att utföra fem olika scenarier som var för sig hade 2-5 delmål. Vi simulerade strömmande data genom att låta en applikation kontinuerligt slumpa fram data som vi analyserade med hjälp av de två realtidsanalystjänsterna. Vi har använt oss av observationer för att dokumentera hur vi arbetade med utvecklingen av analystjänsterna samt för att mäta utvecklingstider och identifiera skillnader i funktionalitet. Vi har även använt oss av frågeformulär för att ta reda på vad användare tyckte om analystjänsterna. Vi kom fram till att Azure Stream Analytics initialt var mer användbart än HDInsight/Storm men att skillnaderna minskade efter hand. Azure Stream Analytics var lättare att arbeta med vid simplare analyser medan HDInsight/Storm hade ett bredare val av funktionalitet.

Mått för att mäta kodkvalitet undersystemutvecklingsprocessen

Viljan att hålla en hög kvalitet på den kod som skrivs vid utveckling av system och applikationerär inte något nytt i utvecklingsvärlden. Flera större företag använder sig av olika mått för attmäta kvaliteten på koden i sina system med målet att hålla en hög driftsäkerhet.Trafikverket är en statlig myndighet som ansvarar för driften av bland annat de system somhåller igång Sveriges järnvägsnät. Eftersom systemen fyller en viktig del i att säkra driften ochse till att tågpositioner, planering av avgångar och hantering av driftstörningar fungerar dygnetrunt för hela landet anser de att det är viktigt att sträva efter att hålla en hög kvalitet påsystemen.Syftet med det här examensarbetet var att ta reda på vilka mått som kan vara möjliga attanvända under systemutvecklingsprocessen för att mäta kvaliteten på kod och hur måtten kananvändas för att öka kvaliteten på IT-lösningar. Detta för att redan på ett tidigt stadie kunnamäta kvaliteten på den kod som skrivs i både befintliga och nyutvecklade system.Studien är en fallstudie som utfördes på Trafikverket, de olika måtten som undersöktes varcode coverage, nivån på maintainability index och antalet inrapporterade incidenter för varjesystem. Mätningar utfördes på sju av Trafikverkets system som i analysen jämfördes motantalet rapporterade incidenter. Intervjuer utfördes för att ge en bild över hur arbetssättet vidutveckling kan påverka kvaliteten. Genom litteraturstudier kom det fram ett mått som inte kundeanvändas praktiskt i det här fallet men är högst intressant, detta är cyclomatic complexity somfinns som en del av maintainability index men som även separat påverkar möjligheten att skrivaenhetstest.Resultaten av studien visar att måtten är användbara för ändamålet men bör inte användassom enskilda mått för att mäta kvalitet eftersom de fyller olika funktioner. Det är viktigt attarbetssättet runt utveckling genomförs enligt en tydlig struktur och att utvecklarna både harkunskap om hur man arbetar med enhetstest och följer kodprinciper för strukturen. Tydligakopplingar mellan nivån på code coverage och inflödet av incidenter kunde ses i de undersöktasystemen där hög code coverage ger ett lägre inflöde av incidenter. Ingen korrelation mellanmaintainability index och incidenter kunde hittas.

A framework for ICT-based knowledge sharing in sustainable rural development : the case of Gilgit-Baltistan, Pakistan

Some 50% of the people in the world live in rural areas, often under harsh conditions and in poverty. The need for knowledge of how to improve living conditions is well documented. In response to this need, new knowledge of how to improve living conditions in rural areas and elsewhere is continuously being developed by researchers and practitioners around the world. People in rural areas, in particular, would certainly benefit from being able to share relevant knowledge with each other, as well as with stakeholders (e.g. researchers) and other organizations (e.g. NGOs). Central to knowledge management is the idea of knowledge sharing. This study is based on the assumption that knowledge management can support sustainable development in rural and remote regions. It aims to present a framework for knowledge management in sustainable rural development, and an inventory of existing frameworks for that. The study is interpretive, with interviews as the primary source for the inventory of stakeholders, knowledge categories and Information and Communications Technology (ICT) infrastructure. For the inventory of frameworks, a literature study was carried out. The result is a categorization of the stakeholders who act as producers and beneficiaries of explicit and indigenous development knowledge. Stakeholders are local government, local population, academia, NGOs, civil society and donor agencies. Furthermore, the study presents a categorization of the development knowledge produced by the stakeholders together with specifications for the existing ICT infrastructure. Rural development categories found are research, funding, agriculture, ICT, gender, institutional development, local infrastructure development, and marketing & enterprise. Finally, a compiled framework is presented, and it is based on ten existing frameworks for rural development that were found in the literature study, and the empirical findings of the Gilgit-Baltistan case. Our proposed framework is divided in four levels where level one consists of the identified stakeholders, level two consists of rural development categories, level three of the knowledge management system and level four of sustainable rural development based on the levels below. In the proposed framework we claim that the sustainability of rural development can be achieved through a knowledge society in which knowledge of the rural development process is shared among all relevant stakeholders.

Testing of combined heating systems for small houses: Improved procedures for whole system test methods : Deliverable 2.3

Dynamic system test methods for heating systems were developed and applied by the institutes SERC and SP from Sweden, INES from France and SPF from Switzerland already before the MacSheep project started. These test methods followed the same principle: a complete heating system – including heat generators, storage, control etc., is installed on the test rig; the test rig software and hardware simulates and emulates the heat load for space heating and domestic hot water of a single family house, while the unit under test has to act autonomously to cover the heat demand during a representative test cycle. Within the work package 2 of the MacSheep project these similar – but different – test methods were harmonized and improved. The work undertaken includes:  • Harmonization of the physical boundaries of the unit under test. • Harmonization of the boundary conditions of climate and load. • Definition of an approach to reach identical space heat load in combination with an autonomous control of the space heat distribution by the unit under test. • Derivation and validation of new six day and a twelve day test profiles for direct extrapolation of test results.   The new harmonized test method combines the advantages of the different methods that existed before the MacSheep project. The new method is a benchmark test, which means that the load for space heating and domestic hot water preparation will be identical for all tested systems, and that the result is representative for the performance of the system over a whole year. Thus, no modelling and simulation of the tested system is needed in order to obtain the benchmark results for a yearly cycle. The method is thus also applicable to products for which simulation models are not available yet. Some of the advantages of the new whole system test method and performance rating compared to the testing and energy rating of single components are:  • Interaction between the different components of a heating system, e.g. storage, solar collector circuit, heat pump, control, etc. are included and evaluated in this test. • Dynamic effects are included and influence the result just as they influence the annual performance in the field. • Heat losses are influencing the results in a more realistic way, since they are evaluated under "real installed" and representative part-load conditions rather than under single component steady state conditions.   The described method is also suited for the development process of new systems, where it replaces time-consuming and costly field testing with the advantage of a higher accuracy of the measured data (compared to the typically used measurement equipment in field tests) and identical, thus comparable boundary conditions. Thus, the method can be used for system optimization in the test bench under realistic operative conditions, i.e. under relevant operating environment in the lab.   This report describes the physical boundaries of the tested systems, as well as the test procedures and the requirements for both the unit under test and the test facility. The new six day and twelve day test profiles are also described as are the validation results.

Development, capabilities and technology : an evaluative framework

In this paper we present a framework to be used for evaluation of Information and Communication Technology for Development (ICT4D) projects. The framework is based on Sen´s notion of development as freedom where human capabilities and functionings are seen as key aspects to development. Sen´s capability approach presents an alternative way of seeing and evaluating development (alternative to more traditional ways of measuring development). The approach is based on expanding freedoms, or eliminating unfreedoms, for people so that they can live a life that they have reason to value. Even though Sen is referenced a lot in ICT4D literature the analysis rarely goes further then stating that Sen presents an alternative to traditional ways of development. Reasons can be that the capability approach does not specifically mention technology, in addition to the lack of guidelines presented by Sen on how to use the framework. The aim of this paper is to operationalize the evaluation process and to include a clear role for technology in Sen´s capability framework. The framework is validated with a case on distance education from Bangladesh. 

Automatic spiral analysis for objective assessment of motor symptoms in Parkinson's disease

A challenge for the clinical management of advanced Parkinson’s disease (PD) patients is the emergence of fluctuations in motor performance, which represents a significant source of disability during activities of daily living of the patients. There is a lack of objective measurement of treatment effects for in-clinic and at-home use that can provide an overview of the treatment response. The objective of this paper was to develop a method for objective quantification of advanced PD motor symptoms related to off episodes and peak dose dyskinesia, using spiral data gathered by a touch screen telemetry device. More specifically, the aim was to objectively characterize motor symptoms (bradykinesia and dyskinesia), to help in automating the process of visual interpretation of movement anomalies in spirals as rated by movement disorder specialists. Digitized upper limb movement data of 65 advanced PD patients and 10 healthy (HE) subjects were recorded as they performed spiral drawing tasks on a touch screen device in their home environment settings. Several spatiotemporal features were extracted from the time series and used as inputs to machine learning methods. The methods were validated against ratings on animated spirals scored by four movement disorder specialists who visually assessed a set of kinematic features and the motor symptom. The ability of the method to discriminate between PD patients and HE subjects and the test-retest reliability of the computed scores were also evaluated. Computed scores correlated well with mean visual ratings of individual kinematic features. The best performing classifier (Multilayer Perceptron) classified the motor symptom (bradykinesia or dyskinesia) with an accuracy of 84% and area under the receiver operating characteristics curve of 0.86 in relation to visual classifications of the raters. In addition, the method provided high discriminating power when distinguishing between PD patients and HE subjects as well as had good test-retest reliability. This study demonstrated the potential of using digital spiral analysis for objective quantification of PD-specific and/or treatment-induced motor symptoms.

Flipped classroom and learning strategies

This paper seeks to answer the research question "How does the flipped classroom affect students’ learning strategies?" In e-learning research, several studies have focused on how students and teachers perceive the flipped classroom approach. In general, these studies have reported pleasing results. Nonetheless, few, if any, studies have attempted to find out the potential effects of the flipped classroom approach on how students learn. This study was based on two cases: 1) a business modelling course and 2) a research methodology course. In both cases, participating students were from information systems courses at Dalarna University in Sweden. Recorded lectures replaced regular lectures. The recorded lectures were followed by seminars that focused on the learning content of each lecture in various ways. Three weeks after the final seminar, we arranged for two focus group interviews to take place in each course, with 8 to 10 students participating in each group. We asked open questions on how the students thought they had been affected and more dedicated questions that were generated from a literature study on the effects of flipped classroom courses. These questions dealt with issues about mobility, the potential for repeating lectures, formative feedback, the role of seminars, responsibility, empowerment, lectures before seminars, and any problems encountered. Our results show that, in general, students thought differently about learning after the courses in relation to more traditional approaches, especially regarding the need to be more active. Most students enjoyed the mobility aspect and the accessibility of recorded lectures, although a few claimed it demanded a more disciplined attitude. Most students also expressed a feeling of increased activity and responsibility when participating in seminars. Some even felt empowered because they could influence seminar content. The length of and possibility to navigate in recorded lectures was also considered important. The arrangement of the seminar rooms should promote face-to-face discussions. Finally, the types of questions and tasks were found to affect the outcomes of the seminars. The overall conclusion with regard to students’ learning strategies is that to be an active, responsible, empowered, and critical student you have to be an informed student with possibilities and mandate to influence how, where and when to learn and be able to receive continuous feedback during the learning process. Flipped classroom can support such learning.