Development of modular roll service concepts

The goal of this study was to find and develop new or improved service concepts for rolls in a paper machine and secondary targets were to find out what the KPIs and values of the concepts are. Two methodologies were utilized in researching this problem; firstly sales personnel were interviewed about customer values and KPIs and a questionnaire about service modules were sent out to four BSI (basic sales item) responsible persons. Throughout the research process differences in geographic regions were identified and several customer KPIs and values were discovered. The interviews showed that the main concern for customers is the cost of operations. The goal is to produce the same or in some cases more tons with smaller operating costs. The questionnaire standardized the data about service modules and made it possible to link these values, KPIs and concerns of customers to Valmet’s service offering. Eventually these service modules were used to create a service concepts that offer flexibility, cost savings, safety and peace of mind for the customers. With this new conceptual approach Valmet can more flexibly answer to customer quotations and modify the offering to better generate customer value and customer satisfaction. In addition a new BSI was defined and proposed for pilot projects.

Dependency of military capabilities on technological development

Our goal is to get better understanding of different kind of dependencies behind the high-level capability areas. The models are suitable for investigating present state capabilities or future developments of capabilities in the context of technology forecasting. Three levels are necessary for a model describing effects of technologies on military capabilities. These levels are capability areas, systems and technologies. The contribution of this paper is to present one possible model for interdependencies between technologies. Modelling interdependencies between technologies is the last building block in constructing a quantitative model for technological forecasting including necessary levels of abstraction. This study supplements our previous research and as a result we present a model for the whole process of capability modelling. As in our earlier studies, capability is defined as the probability of a successful task or operation or proper functioning of a system. In order to obtain numerical data to demonstrate our model, we conducted a questionnaire to a group of defence technology researchers where interdependencies between seven representative technologies were inquired. Because of a small number of participants in questionnaires and general uncertainties concerning subjective evaluations, only rough conclusions can be made from the numerical results

Development of Project Logistics in Engineering, Procurement and Construction Projects

The aim of this Master’s Thesis is to develop project logistics functions in large scale en-gineering, procurement and construction projects. The background of the research topic is compounded from two separate subjects; OPAL Program and case study of an actual EPC project. The purpose is to examine Project Logistics process in accordance with OPAL Program as well as logistics process in focus EPC project. Both entities are researched by using the case study research methodology. Logistics process of the focus EPC project is described as well as presented and in addi-tion, logistics related findings and observations are introduced. Significant findings and observations are found from logistics costs as well as shipment volume estimations in the early phase of the focus ECP project. A notable finding is also that because goods were transported as readily assembled as possible it caused expensive oversized cargo deliveries. From findings and observation of the focus EPC project it can be derived that logistics has to be involved in the early sales phase in order to receive more accurate logistics cost esti-mations for project deliveries. It is also noticed that in order to obtain savings in logistics costs, oversized deliveries must be avoided.

Press forming of paperboard – advancement of converting tools and process control

Press forming is nowadays one of the most common industrial methods in use for producing deeper trays from paperboard. Demands for material properties like recyclability and sustainability have increased also in the packaging industry, but there are still limitations related to the formability of paperboard. A majority of recent studies have focused on material development, but the potential of the package manufacturing process can also be improved by the development of tooling and process control. In this study, advanced converting tools (die cutting tools and the press forming mould) are created for production scale paperboard tray manufacturing. Also monitoring methods that enable the production of paperboard trays with enhanced quality, and can be utilized in process control are developed. The principles for tray blank preparation, including creasing pattern and die cutting tool design are introduced. The mould heating arrangement and determination of mould clearance are investigated to improve the quality of the press formed trays. The effect of the spring back of the tray walls on the tray dimensions can be managed by adjusting the heat-related process parameters and estimating it at the mould design stage. This enables production speed optimization as the process parameters can be adjusted more freely. Real-time monitoring of pressing force by using multiple force sensors embedded in the mould structure can be utilized in the evaluation of material characteristics on a modified production machinery. Comprehensive process control can be achieved with a combination of measurement of the outer dimensions of the trays and pressing force monitoring. The control method enables detection of defects and tracking changes in the material properties. The optimized converting tools provide a basis for effective operation of the control system.

Sustainable development: conceptualizations and measurement

The paper builds up from a review of some expected, but other quite surprising results regarding country estimates for the year 2000 of genuine saving, a sustainability indicator developed by a World Bank research team. We examine this indicator, founded on neoclassical welfare theory, and discuss one of its major problems. Theoretical developments from ecological economics are then considered, together with insights from Georgescu-Roegen's approach to the production process, in search for an alternative approach. A model with potentially fruitful contributions in this direction is reviewed; it points the course efforts could take enable sustainability evaluations based on a more realistic set of interrelated monetary and biophysical indicators.

Successful new venturing process implemented by the founding entrepreneur: A case of Finnish sawmill industry

The fundamental purpose of this research is to emphasise a founding entrepreneur’s own role in the construction of a successful business story, with the focus being on the analysis of the entrepreneur’s activities. The theoretical section sheds light on the heterogeneous nature of existing performance research and, thereby, opens the way for the behavioural approach research of entrepreneurs in the field of new venture performance research. This research can be seen to be in line with the latest trends in entrepreneurship research, which question the applicability of different organisational theories in entrepreneurship research. For this reason, the founding entrepreneur has been chosen, instead of the company, to be the unit of analysis in this research in order to lighten the link in question while developing and refining new knowledge in the field of entrepreneurship. The empirical section of this research focuses on the entrepreneur’s own actions or behaviours that can be seen to be associated with the company’s success. Although some of these actions may resemble the strategic actions of a company as defined in strategic management literature, these actions taken by the entrepreneur themselves must be distinguished from the different organisational actions. Usually, an entrepreneur makes decisions rather independently, mainly on basis of their own intuition and prevailing market conditions, whereas organisational actions are very systematic, and each decision involves many different people. For this reason, an entrepreneur’s actions must be distinguished from organisational actions. In additional to different action paths, the empirical data collected for this research also offers almost unambiguous proof that the actions taken by an entrepreneur at the different stages of a company’s development do play a crucial role in the success of the companies studied in this research. In this way, it is possible to identify a significant link between the behavioural approach research of entrepreneurs and new venture performance research. Due to a lack of behavioural research into founding entrepreneurs, this research has utilised a qualitative (hermeneutic) research approach. The researcher strove to establish a particularly close connection with the entrepreneurs that were studied here and, thus, understand the actions taken at the different stages of their companies’ development as well as the motives and fundamental purposes of these actions. It would not have been possible to manage such profound data that focuses on causalities by using quantitative methods. In addition to interviews, this research used corporate histories of the companies for collecting some of the research data. These corporate histories can be considered excellent tools for the researcher to obtain a preliminary understanding and can, thereby, be seen to have laid the ground for more in-depth and diverse analyses.

Industry specific lifecycle services for process critical motors

This Master’s Thesis examines industrial service business and studies how Global Technical Support Center Finland, part of ABB Oy, can develop its lifecycle services based on availability related customer needs. Focus is in three most business critical industry segments OGP (Oil, Gas and Petrochemical), Power and Metals. The research was conducted as a qualitative case study, including literature review and empirical part. The literature review explores industrial service business, product lifecycle services and related customer needs, product effectiveness and maintenance. This study contains also characteristics of constructive research. Primary material was gathered through internal and external interviews. Both theme and semi-structured interviews were performed. This research has shown that customers have different needs depending of the industry segment where they operate. Most remarkable differences are related to maintenance schedules. The main outcomes of the study are the industry specific lifecycle service models that combine company recommendations with customer specific needs. Other development needs were related to proactivity, condition based monitoring, information sharing and lifecycle estimations.

Applying software performance engineering methods to development of IT device management systems

Ohjelmiston suorituskyky on kokonaisvaltainen asia, johon kaikki ohjelmiston elinkaaren vaiheet vaikuttavat. Suorituskykyongelmat johtavat usein projektien viivästymisiin, kustannusten ylittymisiin sekä joissain tapauksissa projektin täydelliseen epäonnistumiseen. Software performance engineering (SPE) on ohjelmistolähtöinen lähestysmistapa, joka tarjoaa tekniikoita suorituskykyisen ohjelmiston kehittämiseen. Tämä diplomityö tutkii näitä tekniikoita ja valitsee niiden joukosta ne, jotka soveltuvat suorituskykyongelmien ratkaisemiseen kahden IT-laitehallintatuotteen kehityksessä. Työn lopputuloksena on päivitetty versio nykyisestä tuotekehitysprosessista, mikä huomioi sovellusten suorituskykyyn liittyvät haasteet tuotteiden elinkaaren eri vaiheissa.

From restrained golden age to creeping platinum age: A periodization of Latin American development in the Robinsonian tradition

ABSTRACTThis paper analyzes Joan Robinson's growth model, and then adapted in order to provide an exploratory taxonomy of Growth Eras. The Growth Eras or Ages were for Robinson a way to provide logical connections among output growth, capital accumulation, the degree of thriftiness, the real wage and illustrate a catalogue of growth possibilities. This modified taxonomy follows the spirit of Robinson's work, but it takes different theoretical approaches, which imply that some of her classifications do not fit perfectly the ones here suggested. Latin America has moved from a Golden Age in the 1950s and 1960s, to a Leaden Age in the 1980s, having two traverse periods, one in which the process of growth and industrialization accelerated in the late 1960s and early 1970s, which is here referred to as a Galloping Platinum Age, and one in which a process of deindustrialization, and reprimarization and maquilization of the productive structure took place, starting in the 1990s, which could be referred to as a Creeping Platinum Age.

Consumer-led new product development. Case: Dairy Industry

This thesis focuses on consolidation the recommendations on the integration of consumer in new product development (NPD) given in the academic literature, and on the example of the three NPD projects in the case company. The empirical findings advocate that the case company fulfills the principles of consumer-led NPD, and it is only one-step away of the full consumer empowerment strategy. Therefore, its NPD can be seen as an example of consumer-led NPD implementation. The findings also suggest that the product can be developed in consumer-led way regardless of the source of an idea (product- or need-driven), the target audience and resources assigned, in case when consumer mindset is integrated on all levels of organisation: strategic, cultural, operational and process. It is possible with top-management commitment, internal consumer research group, and the sophisticated consumer research methods. The specific managerial recommendations are given on developing consumer-led culture, strategy, NPD process and the appropriate consumer research methods and techniques.

Real-time adaptive control of ultra-fast laser scribing process with spectrometer online monitoring

There exist several researches and applications about laser welding monitoring and parameter control but not a single one have been created for controlling of laser scribing processes. Laser scribing is considered to be very fast and accurate process and thus it would be necessary to develop accurate turning and monitoring system for such a process. This research focuses on finding out whether it would be possible to develop real-time adaptive control for ultra-fast laser scribing processes utilizing spectrometer online monitoring. The thesis accurately presents how control code for laser parameter tuning is developed using National Instrument's LabVIEW and how spectrometer is being utilized in online monitoring. Results are based on behavior of the control code and accuracy of the spectrometer monitoring when scribing different steel materials. Finally control code success is being evaluated and possible development ideas for future are presented.

User Experience Patterns for/of Innovation by Design: A Survey on Design Practices in the Software Development and Innovation Lifecycle

The User Experience (UX) designers are undoubtedly aware of how many UX design methods currently exist and that sometimes it becomes a problem to choose an appropriate one. What are all of methods that designers have in their “arsenal”? When can they use them? This thesis presents the research on the design methods in the contemporary context of User Experience (UX) and Innovations by using a survey approach. The study is limited to cover the domain of consumer mobile services development and provider companies around the world. The study follows 2 clear objectives: (1) to understand what design methods are currently used in that context and to what extent they are used (2) to identify at what stage according to the UX design thinking process for creating innovations they are placed. The study contributes to the research in the field of UX design and Innovations and extends the knowledge in that field together with communities’ (UXPA, SIGCHI, SIGSOFT) members’ cooperation. The research is vital due to lack of information on design practices and their application in the chosen context.

Collaborative reflection : supporting one practitioner's development of online learning communities /

This is a study of one participant's reflective practice as she worked to develop online communities in a face-to-face science course. Her process of reflective practice was examined in order to address factors that influenced her learning path, and the benefits and challenges of collaborative action research. These research goals were pursued using a collaborative action research methodology, initially chosen for its close match with Schon's (1983) model of reflective practice. The participant's learning fit vnth Mezirow's (1991) model of transformative learning. She began with beliefs that matched her goals, and she demonstrated significant learning in three areas. First, she demonstrated instrumental learning around the constraints of workload and time, and achieving online learning community indicators. Second, she demonstrated communicative learning that helped her to see her own needs for feedback and communication more clearly, and how other process partners had been a support to her. Third, her emancipatory learning saw her revisiting and questioning her goals. It was through the reflective conversation during the planned meetings and the researcher's reframing and interrogation of that reflection that the participant was able to clarify and extend her thinking, and in so doing, critically reflect on her practice as she worked to develop online learning communities. In this way, the collaborative action research methodology was an embodiment of co-constructivism through collaborative reflective practice. Schon's (1983) model of reflective practice positions a lone practitioners moving through cycles ofplan-act-observe-reflect. The results fi"om this study suggest that collaboration is an important piece of the reflective practice model.

A critical examination of the involvement of Canadian high-performance athletes in the development of anti-doping policy

The use of certain perfonnance enhancing substances and methods has been defined as a major ethical breach by parties involved in the governance of highperfonnance sport. As a result, elite athletes worldwide are subject to rules and regulations set out in international and national anti-doping policies. Existing literature on the development of policies such as the World Anti-Doping Code and The Canadian antiDoping Program suggests a sport system in which athletes are rarely meaningfully involved in policy development (Houlihan, 2004a). Additionally, it is suggested that this lack of involvement is reflective of a similar lack of involvement in other areas of governance concerning athletes' lives. The purpose ofthis thesis is to examine the history and current state of athletes' involvement in the anti-doping policy process in Canada's high-perfonnance sport system. It includes discussion and analysis of recently conducted interviews with those involved in the policy process as well as an analysis of relevant documents, including anti-doping policies. The findings demonstrate that Canadian athletes have not been significantly involved in the creation of recently developed antidoping policies and that a re-evaluation of current policies is necessary to more fully recognize the reality of athletes' lives in Canada's high-perfonnance sport system and their rights within that system.

Learning experience and identity development as a research assistant /

What research learning experiences do current students have as research assistants (RAs) in the Faculty of Education at Brock University? How do the experiences of research assistants contribute to the formation of a researcher identity and influence future research plans? Despite the importance of these questions, there seems to be very little research conducted or written about the experiences of research assistants as they engage in the research process. There are few resources to which research assistants or their advisors can refer regarding graduate student research learning experiences. The purpose of this study was to understand the kinds of learning experiences that 4 RAs (who are enrolled in the Faculty of Education at Brock University, St. Catharines, Ontario) have and how those experiences contribute to their identities as researchers. Through interviews with participants, observations of participants, and textual documents produced by participants, I have (a) discovered what 4 RAs have learned while engaged in one or more research assistantships and (b) explored how these 4 RAs' experiences have shaped their identities as new researchers. My research design provided a separate case study for each participant RA, including myself as a research participant. Then as a collective, I studied all 4 cases as a case study in itself in the form of a cross-analysis to identify similarities and differences between cases. Using a variety of writing forms and visual narratives, I analyzed and interpreted the experiences of my participants utilizing arts-based literature to inform my analysis and thesis format. The final presentation includes electronic diagrams, models, poetry, a newsletter, a website presentation, and other representational arts-based forms.This thesis is a resource for current and future research assistants who can learn from the research assistant experiences presented in the research. Faculty members who hire research assistants to assist them with their research will also benefit from reading about RAs' learning experiences from the RAs' perspective. The information provided in this thesis document is a resource to inform future policies and research training initiatives in faculty departments and offices at universities. Consequently, this thesis also informs researchers (experienced and inexperienced) about how to conduct research in ways that benefit all parties and provide insight into potential ways to improve research assistantship practices.