On the mechanical behavior of compacted pack ice : A theoretical and numerical investigation

Pack ice is an aggregate of ice floes drifting on the sea surface. The forces controlling the motion and deformation of pack ice are air and water drag forces, sea surface tilt, Coriolis force and the internal force due to the interaction between ice floes. In this thesis, the mechanical behavior of compacted pack ice is investigated using theoretical and numerical methods, focusing on the three basic material properties: compressive strength, yield curve and flow rule. A high-resolution three-category sea ice model is applied to investigate the sea ice dynamics in two small basins, the whole Gulf Riga and the inside Pärnu Bay, focusing on the calibration of the compressive strength for thin ice. These two basins are on the scales of 100 km and 20 km, respectively, with typical ice thickness of 10-30 cm. The model is found capable of capturing the main characteristics of the ice dynamics. The compressive strength is calibrated to be about 30 kPa, consistent with the values from most large-scale sea ice dynamic studies. In addition, the numerical study in Pärnu Bay suggests that the shear strength drops significantly when the ice-floe size markedly decreases. A characteristic inversion method is developed to probe the yield curve of compacted pack ice. The basis of this method is the relationship between the intersection angle of linear kinematic features (LKFs) in sea ice and the slope of the yield curve. A summary of the observed LKFs shows that they can be basically divided into three groups: intersecting leads, uniaxial opening leads and uniaxial pressure ridges. Based on the available observed angles, the yield curve is determined to be a curved diamond. Comparisons of this yield curve with those from other methods show that it possesses almost all the advantages identified by the other methods. A new constitutive law is proposed, where the yield curve is a diamond and the flow rule is a combination of the normal and co-axial flow rule. The non-normal co-axial flow rule is necessary for the Coulombic yield constraint. This constitutive law not only captures the main features of forming LKFs but also takes the advantage of avoiding overestimating divergence during shear deformation. Moreover, this study provides a method for observing the flow rule for pack ice during deformation.

Performance studies on mechanical + adsorption hybrid compression refrigeration cycles with HFC 134a

This paper presents the results of an investigation on the efficacy of hybrid compression process for refrigerant HFC 134a in cooling applications. The conventional mechanical compression is supplemented by thermal compression using a string of adsorption compressors. Activated carbon is the adsorbent for the thermal compression segment. The alternatives of bottoming either mechanical or thermal compression stages are investigated. It is shown that almost 40% energy saving is realizable by carrying out a part of the compression in a thermal compressor compared to the case when the entire compression is carried out in a single-stage mechanical compressor. The hybrid compression is feasible even when low grade heat is available. Some performance indictors are defined and evaluated for various configurations.

Simultaneous material selection and geometry design of statically determinate trusses using continuous optimization

In this work, we explore simultaneous geometry design and material selection for statically determinate trusses by posing it as a continuous optimization problem. The underlying principles of our approach are structural optimization and Ashby’s procedure for material selection from a database. For simplicity and ease of initial implementation, only static loads are considered in this work with the intent of maximum stiffness, minimum weight/cost, and safety against failure. Safety of tensile and compression members in the truss is treated differently to prevent yield and buckling failures, respectively. Geometry variables such as lengths and orientations of members are taken to be the design variables in an assumed layout. Areas of cross-section of the members are determined to satisfy the failure constraints in each member. Along the lines of Ashby’s material indices, a new design index is derived for trusses. The design index helps in choosing the most suitable material for any geometry of the truss. Using the design index, both the design space and the material database are searched simultaneously using gradient-based optimization algorithms. The important feature of our approach is that the formulated optimization problem is continuous, although the material selection from a database is an inherently discrete problem. A few illustrative examples are included. It is observed that the method is capable of determining the optimal topology in addition to optimal geometry when the assumed layout contains more links than are necessary for optimality.

Studies on the Cell Wall Structure and on the Mechanical Properties of Norway Spruce

The structure and the mechanical properties of wood of Norway spruce (Picea abies [L.] Karst.) were studied using small samples from Finland and Sweden. X-ray diffraction (XRD) was used to determine the orientation of cellulose microfibrils (microfibril angle, MFA), the dimensions of cellulose crystallites and the average shape of the cell cross-section. X-ray attenuation and x-ray fluorescence measurements were used to study the chemical composition and the trace element content. Tensile testing with in situ XRD was used to characterise the mechanical properties of wood and the deformation of crystalline cellulose within the wood cell walls. Cellulose crystallites were found to be 192 284 Å long and 28.9 33.4 Å wide in chemically untreated wood and they were longer and wider in mature wood than in juvenile wood. The MFA distribution of individual Norway spruce tracheids and larger samples was asymmetric. In individual cell walls, the mean MFA was 19 30 degrees, while the mode of the MFA distribution was 7 21 degrees. Both the mean MFA and the mode of the MFA distribution decreased as a function of the annual ring. Tangential cell walls exhibited smaller mean MFA and mode of the MFA distribution than radial cell walls. Maceration of wood material caused narrowing of the MFA distribution and removed contributions observed at around 90 degrees. In wood of both untreated and fertilised trees, the average shape of the cell cross-section changed from circular via ambiguous to rectangular as the cambial age increased. The average shape of the cell cross-section and the MFA distribution did not change as a result of fertilisation. The mass absorption coefficient for x-rays was higher in wood of fertilised trees than in that of untreated trees and wood of fertilised trees contained more of the elements S, Cl, and K, but a smaller amount of Mn. Cellulose crystallites were longer in wood of fertilised trees than in that of untreated trees. Kraft cooking caused widening and shortening of the cellulose crystallites. Tensile tests parallel to the cells showed that if the mean MFA is initially around 10 degrees or smaller, no systematic changes occur in the MFA distribution due to strain. The role of mean MFA in defining the tensile strength or the modulus of elasticity of wood was not as dominant as that reported earlier. Crystalline cellulose elongated much less than the entire samples. The Poisson ratio νca of crystalline cellulose in Norway spruce wood was shown to be largely dependent on the surroundings of crystalline cellulose in the cell wall, varying between -1.2 and 0.8. The Poisson ratio was negative in kraft cooked wood and positive in chemically untreated wood. In chemically untreated wood, νca was larger in mature wood and in latewood compared to juvenile wood and earlywood.

Overview No.144 - Mechanical behavior of amorphous alloys

The mechanical properties of amorphous alloys have proven both scientifically unique and of potential practical interest, although the underlying deformation physics of these materials remain less firmly established as compared with crystalline alloys. In this article, we review recent advances in understanding the mechanical behavior of metallic glasses, with particular emphasis on the deformation and fracture mechanisms. Atomistic as well as continuum modeling and experimental work on elasticity, plastic flow and localization, fracture and fatigue are all discussed, and theoretical developments are connected, where possible, with macroscopic experimental responses. The role of glass structure on mechanical properties, and conversely, the effect of deformation upon glass structure, are also described. The mechanical properties of metallic glass-derivative materials – including in situ and ex situ composites, foams and nanocrystal-reinforced glasses – are reviewed as well. Finally, we identify a number of important unresolved issues for the field.

A Success Story or a Failure? : Representing the European Integration in the Curricula and Textbooks of Five Countries

The economic, political and social face of Europe has been changing rapidly in the past decades. These changes are unique in the history of Europe, but not without challenges for the nation states. The support for the European integration varies among the countries. In order to understand why certain developments or changes are perceived as threatening or as desired by different member countries, we must consider the social representations of the European integration on the national level: how the EU is represented to its citizens in media and in educational systems, particularly in the curricula and textbooks. The current study is concerned with the social representations of the European integration in the curricula and school textbooks in five European countries: France, Britain, Germany, Finland and Sweden. Besides that, the first volume of the common Franco-German history textbook was analyzed, since it has been seen as a model for a common European history textbook. As the collective representations, values and identities are dominantly mediated and imposed through media and educational systems, the national curricula and textbooks make an interesting starting point for the study of the European integration and of national and European identities. The social representations theory provides a comprehensive framework for the study of the European integration. By analyzing the curricula and history and civics textbooks of major educational publishers, the study aimed to demonstrate what is written on the European integration and how it is portrayed how the European integration is understood, made familiar and concretized in the educational context in the five European countries. To grasp the phenomenon of the European integration in the textbooks in its entirety, it was investigated from various perspectives. The two analysis methods of content analysis, the automatic analysis with ALCESTE and a more qualitative theory-driven content analysis, were carried out to give a more vivid and multifaceted picture of the object of the research. The analysis of the text was complemented with the analysis of visual material. Drawing on quantitative and qualitative methods, the contents, processes, visual images, transformations and structures of the social representations of European integration, as well as the communicative styles of the textbooks were examined. This study showed the divergent social representations of the European integration, anchored in the nation states, in the five member countries of the European Union. The social representations were constructed around different central core elements: French Europe in the French textbooks, Ambivalent Europe in the British textbooks, Influential and Unifying EU in the German textbooks, Enabling and Threatening EU in the Finnish textbooks, Sceptical EU in the Swedish textbooks and EU as a World Model in the Franco-German textbook. Some elements of the representations were shared by all countries such as peace and economic aspects of the European cooperation, whereas other elements of representations were found more frequently in some countries than in others, such as ideological, threatening or social components of the phenomenon European integration. The study also demonstrated the linkage between social representations of the EU and national and European identities. The findings of this study are applicable to the study of the European integration, to the study of education, as well as to the social representation theory.

Low density polyethylene and grafted lignin polyblends using epoxy-functionalized compatibilizer: mechanical and thermal properties

Lignin was graft copolymerized with methyl methacrylate using manganic pyrophosphate as initiator. This modified lignin was then blended (up to 50 wt%) with low density polyethylene (LDPE) using a small quantity of poly[ethylene-co-(glycidyl methacrylate)] (PEGMA) compatibilizer. The mechanical properties of the blend were substantially improved by using modified lignin in contrast to untreated lignin. Differential scanning calorimetry studies showed loss of crystallinity of the LDPE phase owing to the interaction between the blend components. Thermogravimetric analysis showed higher thermal stability of modified lignin in the domain of blend processing. This suggested that there is scope for useful utilization of lignin, which could also lead to the development of eco-friendly products. (c) 2005 Society of Chemical Industry.

On the study of a third-order mechanical oscillator

In this paper, the study of a third-order mechanical oscillator is presented by demonstrating its equivalence to the well-known R.C. multivibrator with two additional reactive elements. The conditions for the oscillator's possession of periodic solutions are presented. It is also shown that under certain conditions, the study of the given third-order autonomous system can be reduced to the study of an equivalent second-order, non-autonomous system.

Espoo shootings: A failure of restraint

Argues that focus on the immigrant status of the Espoo shooter deflects attention from the failure of the relevant authorities to effectively respond to a foreseeable threat to public safety. Response to public discussion of New Year's Day shootings in Espoo shopping mall.

Espoo shootings: A failure of restraint

Argues that focus on the immigrant status of the Espoo shooter deflects attention from the failure of the relevant authorities to effectively respond to a foreseeable threat to public safety. Response to public discussion of New Year's Day shootings in Espoo shopping mall.

Cystatin C, a measure of renal function, as prognostic risk marker in acute heart failure : Studies on the cardiorenal syndrome

Acute heart failure (AHF) is a complex syndrome associated with exceptionally high mortality. Still, characteristics and prognostic factors of contemporary AHF patients have been inadequately studied. Kidney function has emerged as a very powerful prognostic risk factor in cardiovascular disease. This is believed to be the consequence of an interaction between the heart and kidneys, also termed the cardiorenal syndrome, the mechanisms of which are not fully understood. Renal insufficiency is common in heart failure and of particular interest for predicting outcome in AHF. Cystatin C (CysC) is a marker of glomerular filtration rate with properties making it a prospective alternative to the currently used measure creatinine for assessment of renal function. The aim of this thesis is to characterize a representative cohort of patients hospitalized for AHF and to identify risk factors for poor outcome in AHF. In particular, the role of CysC as a marker of renal function is evaluated, including examination of the value of CysC as a predictor of mortality in AHF. The FINN-AKVA (Finnish Acute Heart Failure) study is a national prospective multicenter study conducted to investigate the clinical presentation, aetiology and treatment of, as well as concomitant diseases and outcome in, AHF. Patients hospitalized for AHF were enrolled in the FINN-AKVA study, and mortality was followed for 12 months. The mean age of patients with AHF is 75 years and they frequently have both cardiovascular and non-cardiovascular co-morbidities. The mortality after hospitalization for AHF is high, rising to 27% by 12 months. The present study shows that renal dysfunction is very common in AHF. CysC detects impaired renal function in forty percent of patients. Renal function, measured by CysC, is one of the strongest predictors of mortality independently of other prognostic risk markers, such as age, gender, co-morbidities and systolic blood pressure on admission. Moreover, in patients with normal creatinine values, elevated CysC is associated with a marked increase in mortality. Acute kidney injury, defined as an increase in CysC within 48 hours of hospital admission, occurs in a significant proportion of patients and is associated with increased short- and mid-term mortality. The results suggest that CysC can be used for risk stratification in AHF. Markers of inflammation are elevated both in heart failure and in chronic kidney disease, and inflammation is one of the mechanisms thought to mediate heart-kidney interactions in the cardiorenal syndrome. Inflammatory cytokines such as interleukin-6 (IL-6) and tumor necrosis factor-alpha (TNF-α) correlate very differently to markers of cardiac stress and renal function. In particular, TNF-α showed a robust correlation to CysC, but was not associated with levels of NT-proBNP, a marker of hemodynamic cardiac stress. Compared to CysC, the inflammatory markers were not strongly related to mortality in AHF. In conclusion, patients with AHF are elderly with multiple co-morbidities, and renal dysfunction is very common. CysC demonstrates good diagnostic properties both in identifying impaired renal function and acute kidney injury in patients with AHF. CysC, as a measure of renal function, is also a powerful prognostic marker in AHF. CysC shows promise as a marker for assessment of kidney function and risk stratification in patients hospitalized for AHF.

On the discursive construction of success/failure in narratives of post-merger integration

This article concentrates on the discursive constmction of success and failure in narratives of post-merger integration. Drawing on extensive interview material from eight Finnish-Swedish mergers and acquisitions, the empirical analysis leads to distinguishing four types of discourse — 'rationalistic', 'cultural', 'role-bound' and 'individualistic' — that narrators employ in recounting their experiences. In particular, the empirical material illustrates how the discursive frameworks enable specific (di.scursive) strategies and moves for (re)framing the success/failure, justification/legitimization of one's own actions, and (re)constniction of responsibility when dealing with socio-psychological pressures associated with success/failtire. The analysis also suggests that, as a result of making use of these discursive strategies and moves, success stories are likely to lead to overly optimistic or, in the case of failure stories, overly pessimistic views on the management's ability to control these change processes. Tliese findings imply that we should take the discursive elements that both constrain our descriptions and explanations seriously, and provide opportunities for more or less intentional (re)interpretations of postmerger integration or other organizational change processes.

Mechanical and Thermal Properties of Eva Blended with Biodegradable Ethyl Cellulose

In this study, biodegradable blend of Poly (Ethylene-co-Vinyl Acetate) (EVA) and Ethyl Cellulose (EC) were prepared. Ethylene vinyl alcohol (EVOH) copolymer was used as an interfacial compatibilizer to enhance adhesion between EVA and EC. The melt blended compatibilized biocomposites were examined for mechanical and thermal properties as per the ASTM standards. It has been found that the EC has a reinforcing effect on EVA leading to enhanced tensile strength and also impart biodegradability. Thus, a high loading of 50% EC could be added without compromising Much on the mechanical properties. Analysis of the tensile data using predictive theories showed an enhanced interaction of the dispersed phase (EC) and the matrix (EVA). The compatibilizing effects of EVOH on these blends were confirmed by the significant improvement in the mechanical properties comparable with neat EVA as also observed by SEM microscopy. The TGA thermograms exhibits two-stage degradation and as EC content increases, the onset temperature for thermal degradation reduces. (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 116: 1044-1056, 2010

Somali State Failure: Players, Incentives and Institutions

In Somalia the central government collapsed in 1991 and since then state failure became a widespread phenomenon and one of the greatest political and humanitarian problems facing the world in this century. Thus, the main objective of this research is to answer the following question: What went wrong? Most of the existing literature on the political economy of conflict starts from the assumption that state in Africa is predatory by nature. Unlike these studies, the present research, although it uses predation theory, starts from the social contract approach of state definition. Therefore, rather than contemplating actions and policies of the rulers alone, this approach allows us to deliberately bring the role of the society – as citizens – and other players into the analyses. In Chapter 1, after introducing the study, a simple principal-agent model will be developed to check the logical consistence of the argument and to make the identification of causal mechanism easier. I also identify three main actors in the process of state failure in Somalia: the Somali state, Somali society and the superpowers. In Chapter 2, so as to understand the incentives, preferences and constraints of each player in the state failure game, I in some depth analyse the evolution and structure of three central informal institutions: identity based patronage system of leadership, political tribalism, and the Cold War. These three institutions are considered as the rules of the game in the Somali state failure. Chapter 3 summarises the successive civilian governments’ achievements and failures (1960-69) concerning the main national goals, national unification and socio-economic development. Chapter 4 shows that the military regime, although it assumed power through extralegal means, served to some extent the developmental interest of the citizens in the first five years of its rule. Chapter 5 shows the process, and the factors involved, of the military regime’s self-transformation from being an agent for the developmental interests of the society to a predatory state that not only undermines the interests of the society but that also destroys the state itself. Chapter 6 addresses the process of disintegration of the post-colonial state of Somalia. The chapter shows how the regime’s merciless reactions to political ventures by power-seeking opposition leaders shattered the entire country and wrecked the state institutions. Chapter 7 concludes the study by summarising the main findings: due to the incentive structures generated by the informal institutions, the formal state institutions fell apart.