Períodos de interferência das plantas daninhas na cultura da cana-de-açúcar: III - capim-braquiária (Brachiaria decumbens) e capim-colonião (Panicum maximum)

Um experimento foi conduzido em São João da Boa Vista-SP, com o objetivo de determinar o período anterior à interferência (PAI) e o período total de prevenção à interferência (PTPI) das plantas daninhas na cultura da cana-de-açúcar. A cana foi plantada em abril de 1995, na época de plantio caracterizada por maior deficiência hídrica. A comunidade infestante presente foi variada, sendo Brachiaria decumbens e Panicum maximum as espécies mais importantes. Essa comunidade tendeu a apresentar acúmulo crescente de matéria seca durante todo o período de avaliação e reduziu em até 40% a produtividade de colmos da cana-de-açúcar. A cultura conviveu com a comunidade infestante até 74 dias após o plantio, sem sofrer redução significativa na produtividade (PAI). O período mínimo de controle para garantir a produtividade foi de 127 DAP (PTPI). Dessa forma, o controle das plantas daninhas foi crítico no período compreendido entre 74 e 127 dias após o plantio.

Mapeamento da distribuição espacial da infestação de Panicum maximum durante a colheita da cultura de milho

Metodologias de mapeamento de plantas daninhas em áreas agrícolas estão sendo utilizados a fim de gerar mapas de aplicação localizada de herbicidas, sendo que, este mapeamento vem sendo feito através de ferramentas da agricultura de precisão. O mapeamento das plantas daninhas gera então mapas de tratamentos de herbicidas que comandam pulverizadores capazes de realizar a aplicação localizada de herbicidas, aproveitando o comportamento contagioso inerente da comunidade das plantas daninhas, porém poucos experimentos relatam a eficiência desses métodos. Este experimento teve como objetivo comparar metodologias de mapeamento do capim-colonião (Panicum maximum), com base na avaliação visual durante e após a colheita da cultura de milho. Durante a colheita foi conduzido o monitoramento com avaliação visual, feito por uma pessoa devidamente treinada e pelo operador antecipadamente orientado. Após a colheita, a avaliação visual foi feita por amostragens, numa grade regular de 20 x 20 m. Foi observada uma subestimação de 6% da área infestada, com uma infestação de mais de 80% de cobertura pelo método de mapeamento durante a colheita, quando comparado com o caminhamento na grade regular após a colheita. Os dois métodos foram coincidentes em 45% da área marcada.

Manejo de plantas daninhas no plantio direto da soja (Glycine max) sobre o milheto (Pennisetum maximum)

Com o objetivo de avaliar diferentes manejos de plantas daninhas no plantio direto da soja, cultivada sobre palha de milheto (manejada com rolo-faca ou glyphosate), foram realizados dois experimentos com dois cultivares de soja (Conquista e Celeste) e aplicação em pós-emergência da mistura formulada dos herbicidas fluazifop-p-butil + fomesafen (0, 100+125 e 200+250 g ha¹). Por meio da análise de variância conjunta dos experimentos, verificou-se predominância de diferentes espécies de plantas daninhas em função do manejo dado ao milheto, sendo a maior infestação destas verificada sob o manejo com rolo-faca associado à ausência de controle na cultura da soja. Há a possibilidade da redução da dose de fluazifop-p-butil + fomesafen para o controle de plantas daninhas na soja, desde que precedida da aplicação de glyphosate para formação da palha de milheto. Sob esta condição, verificou-se maior controle das espécies daninhas, em relação ao manejo mecânico (rolo-faca), resultando em maior produtividade da cultura, devido à maior quantidade de vagens por planta e de grãos por vagem.

Ação alelopática de extratos de embaúba (Cecropia pachystachya) no crescimento de capim-colonião (Panicum maximum)

Cecropia pachystachya (embaúba) é uma planta da família Urticaceae, característica de margens de florestas. Possui rápido desenvolvimento e é abundante em todo o território brasileiro. Neste estudo, foram analisados os potenciais alelopáticos dos extratos metanólicos da casca, do tronco e das raízes da embaúba por meio de bioensaios de germinação e medida do desenvolvimento da parte aérea do capim-colonião (Panicum maximum). O maior efeito foi observado no extrato das raízes na concentração de 150 ppm. Os principais constituintes voláteis identificados por CG/EM foram: na casca: geranilacetona, ácido láurico, ácido palmítico, octadecanal e alcanos de cadeia longa; nas raízes: geranilacetona, farnesol, farnesilacetona, ácido palmítico, octadecanal e alcanos de cadeia longa; e no tronco: geranilacetona, ácido palmítico e alcanos de cadeia longa.

Influência do oeríodo de cultivo de Panicum maximum (cultivar Tanzânia) na fitorremediação de solo contaminado com picloram

O objetivo deste trabalho foi avaliar a influência do tempo de cultivo de Panicum maximum (cultivar Tanzânia) sobre a fitorremediação de solo contaminado com picloram. O experimento foi conduzido em casa de vegetação no período de setembro de 2006 a fevereiro de 2007. Os fatores foram compostos pela combinação entre quatro períodos de cultivo da espécie vegetal Panicum maximum (cultivar Tanzânia) (0, 60, 80 e 100 dias) e três doses do picloram (0, 80 e 160 g ha-1), totalizando 12 tratamentos. O delineamento experimental utilizado foi o inteiramente casualizado em esquema fatorial 4 x 3, com quatro repetições. Como substrato utilizaram-se amostras de solo classificado como Latossolo Vermelho eutroférrico. Após o tempo estabelecido de atuação da espécie fitorremediadora, efetuou-se a semeadura das espécies bioindicadoras da presença do picloram: tomate e soja. As espécies bioindicadoras demonstraram alta sensibilidade à presença do picloram no solo, sendo inviável o cultivo dessas culturas em áreas contaminadas com esse herbicida sem a execução de algum procedimento remediador. O cultivo prévio de Tanzânia por 60 dias garantiu crescimento inicial satisfatório das plantas de soja e tomate quando a contaminação inicial não foi maior que 80 g ha-1 de picloram. Acima desse valor, a fitorremediação ocorrida proporcionou menor crescimento das plantas de soja e tomate, sendo necessário maior tempo de descontaminação.

Introduction of the T-10 static line parachuting capability to the NH90 helicopter

The purpose of this study was to investigate the suitability of the Finnish Defence Forces’ NH90 helicopter for parachuting operations with the T-10 static line parachute system. The work was based on the Army Command’s need to compensate for the reduction in the outsourced flight hours for the military static line parachuting training. The aim of the research was to find out the procedures and limitations with which the NH90 IOC+ or FOC version helicopter could be used for static line parachutist training with the T- 10B/MC1-1C parachutes. The research area was highly complicated and non-linear. Thus analytical methods could not be applied with sufficient confidence, even with present-day computing power. Therefore an empirical research method was selected, concentrating on flight testing supported with literature study and some calculated estimations. During three flights and 4.5 flight hours in Utti, Finland on 17−20 September 2012, a total of 44 parachute drops were made. These consisted of 16 dummy drops and 28 paratrooper jumps. The test results showed that when equipped with the floor mounted PASI-1 anchor line, the deflector bar of the NHIndustries’ Parachuting Kit and Patria’s floor protection panels the Finnish NH90 variant could be safely used for T-10B/MC1-1C static line parachuting operations from the right cabin door at airspeed range of 50−80 KIAS (∼90–150 km/h). The ceiling mounted anchor lines of the NHI’s Parachuting Kit were not usable with the T-10 system. This was due to the static lines’ unsafe behaviour in slipstream when connected to the cabin ceiling level. In conclusion, the NH90 helicopter can be used to meet the Army Command’s requirement for an additional platform for T-10 static line parachutist training. Material dropping, the effect of additional equipment and jumping from the rear ramp should be further studied.

Efeito do consórcio de milho com Panicum maximum na comunidade infestante e na cultura da soja em rotação

Objetivou-se com este trabalho estudar os efeitos do consórcio de milho com colonião (Panicum maximum cv. Aruana) na infestação de plantas daninhas e na cultura da soja em rotação. O experimento foi realizado em campo, no período de dezembro de 2008 a abril de 2010, em área experimental da UNESP, campus de Jaboticabal-SP. Utilizou-se o delineamento em blocos ao acaso, com quatro repetições, em esquema de parcela subdividida. Foram estudadas duas formas de semeadura (a lanço e em linha) de colonião nas parcelas e quatro quantidades de sementes (200, 400, 600 e 800 pontos de valor cultural - PVC) nas subparcelas, além de três testemunhas, representadas pelo monocultivo das espécies, como tratamentos adicionais. O cultivo consorciado não afetou o desenvolvimento do milho, comparado ao milho solteiro. Embora na colheita do milho houvesse maior matéria seca e densidade de plantas de colonião com a semeadura de 800 PVC, antes da semeadura da soja o acúmulo de massa não diferiu entre os tratamentos de consórcio. Portanto, a semeadura de 200 PVC de sementes de colonião, a lanço ou em linha, foi suficiente para a manutenção de quantidade (9,1 t ha-1) adequada de palha sobre o solo. Antecedendo a semeadura da soja, a infestação de plantas daninhas na testemunha de milho solteiro foi maior do que nos tratamentos de consórcio e nas testemunhas da forrageira solteira (a lanço e em linha). O mesmo foi observado para densidade de plantas daninhas após a instalação da cultura. Os sistemas de consórcio de milho com colonião não interferiram em nenhuma característica avaliada na cultura da soja cultivada em rotação. Da mesma forma, não foi observada diferença entre os tratamentos de consórcios e a testemunha de milho em monocultivo para produção de grãos de soja.

Neutronisäteilylle altistuminen käytetyn polttoaineen siirrossa Olkiluodon voimalaitoksella

Tässä työssä on tutkittu OL1/OL2-ydinvoimalaitosten käytetyn polttoaineen siirrossa aiheutuvaa altistusta neutronisäteilylle. Käytetty polttoaine siirretään vedellä täytetyssä käytetyn polttoaineen siirtosäiliössä Castor TVO:ssa OL1/OL2-laitoksilta käytetyn polttoaineen varastolle. Siirtotyön aikana useat eri ammattiryhmiin kuuluvat henkilöt työskentelevät siirtosäiliön välittömässä läheisyydessä, altistuen käytetystä polttoaineesta emittoituvalle fotoni- ja neutronisäteilylle. Aikaisemmista neutronisäteilyannosten mittauksista on todettu, ettei jatkuvalle altistuksen seurannalle ole ollut tarvetta. Tämän työn tarkoitus on selvittää teoreettisilla laskelmilla siirtotyöhön osallistuvan henkilön mahdollisuus saada kirjausrajan ylittävä annos neutronisäteilyä. Neutronisäteilyn annosnopeudet siirtosäiliötä ympäröivässä tilassa on laskettu yhdysvaltalaisella Monte Carlo-menetelmään perustuvalla MCNP-ohjelmalla. MCNP:llä mallinnettiin siirtosäiliö, siirtosäiliön sisältämä polttoaine ja ympäröivä tila kolmella jäähtymisajalla ja kolmella keskimääräisellä maksimipoistopalamalla. Polttoainenippujen isotooppikonsentraatiot ja säteilylähteiden voimakkuudet on laskettu Studsvik SNF-ohjelmalla. Simuloinnin perusteella voidaan todeta, ettei neutronisäteilyannosten jatkuvalle seurannalle ole tarvetta käytetyn polttoaineen siirrossa. Vaikka neutronisäteilyn annosnopeudet voivat nousta siirtosäiliön läheisyydessä suhteellisen suuriksi, ovat siirtosäiliön lähellä tehtävät työt niin lyhytaikaisia, että kirjausrajan ylitystä voidaan pitää hyvin epätodennäköisenä. Johtopäätökset varmistetaan työssä suunnitellulla mittausjärjestelyllä.

Efeito do hexazinone isolado e em mistura na eficiência fotossintética de Panicum maximum

Esta pesquisa teve como objetivo avaliar a velocidade e intensidade de ação do hexazinone isolado e em mistura com outros inibidores do fotossistema II, através da eficiência fotossintética de Panicum maximum em pós-emergência. O ensaio foi constituído de seis tratamentos: hexazinone (250 g ha-1), tebuthiuron (1,0 kg ha-1), hexazinone + tebuthiuron (125 g ha-1 + 0,5 kg ha-1), diuron (2.400 g ha-1), hexazinone + diuron (125 + 1.200 g ha-1), metribuzin (1.440 g ha-1), hexazinone + metribuzin (125 + 720 g ha-1) e uma testemunha. O experimento foi instalado em delineamento inteiramente casualizado, com quatro repetições. Após a aplicação dos tratamentos, as plantas foram transportadas para casa de vegetação sob condições controladas de temperatura e umidade, onde ficaram durante o período experimental, sendo realizadas as seguintes avaliações: taxa de transporte de elétrons e análise visual de intoxicação. A avaliação com o fluorômetro foi realizada nos intervalos de 1, 2, 6, 24, 48, 72, 120 e 168 horas após a aplicação, e as avaliações visuais, aos três e sete dias após a aplicação. Os resultados demonstraram diferença nos tratamentos, enfatizando a aplicação do diuron, que reduziu lentamente o transporte de elétrons comparado com os outros herbicidas e, em mistura com hexazinone, apresentou efeito sinérgico. Verificou-se com o uso do fluorômetro a intoxicação antecipada em plantas de P. maximum após a aplicação de herbicidas inibidores do fotossistema II de forma isolada e em mistura.

S-metolachlor efficacy on the control of Brachiaria decumbens, Digitaria horizontalis, and Panicum maximum in mechanically green harvested sugarcane

The aim of this study was to assess the efficacy of S-metolachlor applied in pre-emergence conditions for the control of Brachiaria decumbens, Digitaria horizontalis, and Panicum maximum in sugar cane mechanically harvested without previous burning of the crop (green harvest) with the crop residue either left or not on the soil surface. The experiments were established in the field according to a randomized complete block design with four repetitions in a 7 x 2 split-plot scheme. In the plots, five herbicide treatments were studied (S-metolachlor at 1.44, 1.92, and 2.40 kg ha-1, clomazone at 1.20 kg ha-1, and isoxaflutole at 0.188 kg ha-1), and two control treatments with no herbicide application. In the subplots, the presence or absence of sugar cane crop residue on the soil surface was evaluated. S-metolachlor efficacy was not hampered by either 14 or 20 t ha-1 of sugar cane crop residue on the soil surface. When sugar cane crop residue was covering the soil surface, S-metolachlor at a rate of 1.44 kg ha-1 resulted in weed control similar at their larger rates, where as without the presence of crop residue, S-metolachlor controlled B. decumbens, D. horizontalis, and P. maximum at the rates of 1.92, 1.44, and 1.92 kg ha-1, respectively. The herbicides clomazone and isoxaflutole were effective for the studied species, independently of the crop residue covering the soil surface. S-metolachlor caused no visible injury symptoms to the sugar cane plant. Clomazone and isoxaflutole caused visible injuries to the sugar cane plant. None of the herbicides negatively affected the number of viable culms m² or the culm height and diameter.

Transfer pricing documentation differences in Finland and China - Case company study

This Master’s Thesis deals with the topic of transfer pricing documentation in Finland and China. The goal of the research is to find what kind of differences exist in a single case company’s transfer pricing documentation when following Chinese or Finnish transfer pricing regulations. The study is carried out as a case study research. The theoretical framework consists of information from different transfer pricing topics and transfer pricing documentation regulations in China and Finland. The main research material was the case company’s transfer pricing documents with the support of open discus-sion with one of the case company’s employees. The study compared the 2009 and 2010 documents. The 2009 document was done based on the Finnish method while the 2010 document was based on the Chinese documentation principles. The conclusion made is that the content of the documents was heavily similar, while the main differences come in the way the content is presented and the level of detail used in the documents.

Russian SME technology transfer to Finland – Entrepreneurial challenges and motivation

The purpose of this thesis is to study the international technology transfer of transition economy SME entrepreneurs to the developed countries. The research aims to characterize the phenomenon by studying Russian SME technology transfer to Finland with the research methods from case studies. In addition to characterizing the phenomenon, the research finds out factors that motivate Russian entrepreneurs to conduct international technology transfer and what are the challenges the Russian entrepreneurs face when they enter the Finnish business environment. The qualitative data was collected from six semi-structured interviews with the entrepreneurs and several secondary data sources, considering four different technology transfer cases. The data and the analysis showed that the case companies in Finland are mostly linked to manufacturing of physical products. The entrepreneurs are motivated to come to Finland mainly by the opportunities and support the Finnish business and innovation environment provides to the entrepreneurs and by the personal gain that they get by establishing the company in Finland. Major challenges in the process include time constraints and capital requirements, difficulties on achieving sales on the Finnish market and finding skilled personnel to support the Russian management and owners.

Particle model for simulating limestone reactions in novel fluidised bed energy applications

The development of carbon capture and storage (CCS) has raised interest towards novel fluidised bed (FB) energy applications. In these applications, limestone can be utilized for S02 and/or CO2 capture. The conditions in the new applications differ from the traditional atmospheric and pressurised circulating fluidised bed (CFB) combustion conditions in which the limestone is successfully used for SO2 capture. In this work, a detailed physical single particle model with a description of the mass and energy transfer inside the particle for limestone was developed. The novelty of this model was to take into account the simultaneous reactions, changing conditions, and the effect of advection. Especially, the capability to study the cyclic behaviour of limestone on both sides of the calcination-carbonation equilibrium curve is important in the novel conditions. The significances of including advection or assuming diffusion control were studied in calcination. Especially, the effect of advection in calcination reaction in the novel combustion atmosphere was shown. The model was tested against experimental data; sulphur capture was studied in a laboratory reactor in different fluidised bed conditions. Different Conversion levels and sulphation patterns were examined in different atmospheres for one limestone type. The Conversion curves were well predicted with the model, and the mechanisms leading to the Conversion patterns were explained with the model simulations. In this work, it was also evaluated whether the transient environment has an effect on the limestone behaviour compared to the averaged conditions and in which conditions the effect is the largest. The difference between the averaged and transient conditions was notable only in the conditions which were close to the calcination-carbonation equilibrium curve. The results of this study suggest that the development of a simplified particle model requires a proper understanding of physical and chemical processes taking place in the particle during the reactions. The results of the study will be required when analysing complex limestone reaction phenomena or when developing the description of limestone behaviour in comprehensive 3D process models. In order to transfer the experimental observations to furnace conditions, the relevant mechanisms that take place need to be understood before the important ones can be selected for 3D process model. This study revealed the sulphur capture behaviour under transient oxy-fuel conditions, which is important when the oxy-fuel CFB process and process model are developed.

Wind Turbine Direct-Drive Permanent-Magnet Generator with Direct Liquid Cooling for Mass Reduction

Today’s electrical machine technology allows increasing the wind turbine output power by an order of magnitude from the technology that existed only ten years ago. However, it is sometimes argued that high-power direct-drive wind turbine generators will prove to be of limited practical importance because of their relatively large size and weight. The limited space for the generator in a wind turbine application together with the growing use of wind energy pose a challenge for the design engineers who are trying to increase torque without making the generator larger. When it comes to high torque density, the limiting factor in every electrical machine is heat, and if the electrical machine parts exceed their maximum allowable continuous operating temperature, even for a short time, they can suffer permanent damage. Therefore, highly efficient thermal design or cooling methods is needed. One of the promising solutions to enhance heat transfer performances of high-power, low-speed electrical machines is the direct cooling of the windings. This doctoral dissertation proposes a rotor-surface-magnet synchronous generator with a fractional slot nonoverlapping stator winding made of hollow conductors, through which liquid coolant can be passed directly during the application of current in order to increase the convective heat transfer capabilities and reduce the generator mass. This doctoral dissertation focuses on the electromagnetic design of a liquid-cooled direct-drive permanent-magnet synchronous generator (LC DD-PMSG) for a directdrive wind turbine application. The analytical calculation of the magnetic field distribution is carried out with the ambition of fast and accurate predicting of the main dimensions of the machine and especially the thickness of the permanent magnets; the generator electromagnetic parameters as well as the design optimization. The focus is on the generator design with a fractional slot non-overlapping winding placed into open stator slots. This is an a priori selection to guarantee easy manufacturing of the LC winding. A thermal analysis of the LC DD-PMSG based on a lumped parameter thermal model takes place with the ambition of evaluating the generator thermal performance. The thermal model was adapted to take into account the uneven copper loss distribution resulting from the skin effect as well as the effect of temperature on the copper winding resistance and the thermophysical properties of the coolant. The developed lumpedparameter thermal model and the analytical calculation of the magnetic field distribution can both be integrated with the presented algorithm to optimize an LC DD-PMSG design. Based on an instrumented small prototype with liquid-cooled tooth-coils, the following targets have been achieved: experimental determination of the performance of the direct liquid cooling of the stator winding and validating the temperatures predicted by an analytical thermal model; proving the feasibility of manufacturing the liquid-cooled tooth-coil winding; moreover, demonstration of the objectives of the project to potential customers.

Performance management through innovation capability in SMEs

Small and medium-sized enterprises (SMEs) are assuredly important to maintain strong economic growth. How to manage and maintain SMEs’ performance is a sizable challenge, and requires an understanding of the drivers of performance. Innovation capability has been suggested to be one of these key drivers. In order to manage innovation capability– performance relationship, it has to be measured. SMEs may have distinct characteristics that separate them being just smaller versions of large firms. Performance measurement and management of innovation capability is challenging, because SMEs usually have some drawbacks compared to large firms. Thus, it is unclear whether theories developed to understand large firms apply to SMEs. This research contributes to the existing discussion on performance management through innovation capability in the SME context. First, it aims at increasing understanding of the role of innovation capability in performance management. Second, it aims at clarifying the role of performance measurement in developing innovation capability. Thus, the main objective of the research is to study how to manage performance through measuring and managing innovation capability. The thesis is based on five research articles that follow a positivist approach. From a methodological point of view, quantitative and complementing conceptual methods of data collection are utilized. This research indicates that the performance management and measurement play a significant role in innovation capability in SMEs. This research makes three main contributions. First, it gives empirical evidence on the connection between innovation capability and SME performance. Second, it illustrates the connection between performance measurement and innovation capability. Thirdly, it clarifies how to measure the relationship between innovation capability and performance.