L'intelligenza emotiva in età evolutiva

Emotional Intelligence (EI) has increasingly gained widespread popularity amongst both lay people and scientists in a wide range of contexts and across several research areas. In spite of rigorous inquiry into its applications in educational, social, health and clinical settings, substantial disagreement exists regarding the definition of EI, with respect to both terminology and operationalizations. Actually, there is a consensus about a conceptual distinction between Trait EI, or trait emotional self-efficacy (Petrides & Furnham, 2001), and Ability EI, or cognitive-emotional ability (Mayer & Salovey, 1997). Trait EI is measured via self-report questionnaires, whereas Ability EI is assessed via maximum performance tests. Moreover, EI is the broadest of the emotional constructs, and it subsumes various constructs, as Emotional Awareness (Lane & Schwartz, 1987). To date, EI research has focused primarily on adults, with fewer studies conducted with child samples. The aim of the present study is to investigate the role of different models of EI in childhood and early adolescence (N = 670; 353 females; Mage= 10.25 years ; SD = 1.57). In addition, a further goal is to evaluate the relationship of each construct with personality, non verbal cognitive intelligence, school performance, peer relationships, and affective disorders (anxiety and depression). Results shows significant correlations between Trait EI and Emotional Awareness, whereas Trait and Ability EI appear as independent constructs. We also found significant positive associations between age and Ablity EI and Emotional Awareness (although with add of verbal productivity), while gender differences emerged in favour of females in all EI-related measures. The results provide evidence that Trait EI is partially determined by all of the Big Five personality dimensions, but independent of cognitive ability. Finally, the present study highlights the role of EI on social interactions, school performance and, especially, a negative relationship between Trait EI and psychopathology.

Synthese von (Glyco-)Peptiden aus der homophilen Erkennungsregion des murinen LI-Cadherins mit und ohne chromophore Markierung

Im Rahmen der vorgelegten Arbeit wurden sowohl Peptide, als auch Glycopeptide aus der homophilen Erkennungsregion des LI-Cadherins der Maus synthetisiert. Die verwendeten tumorassoziierten Antigene: TN-, T-, Sialyl-TN, (2,6)-Sialyl-T- und (2,3)-Sialyl-T-Antigen wurden ausgehend von Galactose und L-Serin nach linearen Syntheserouten aufgebaut. Da neben der reinen Synthese auch die Konformation der dargestellten Peptide von Interesse war, sollten sie mittels FRET-Spektroskopie untersucht werden. Als Chromophore kamen neben dansyliertem L-Leucin und einem über einen Tetraethylenglycolspacer dansyliertem L-Leucin-Derivat auch ein modifiziertes Cumarinderivat zum Einsatz. Obwohl verschiedene Glycopeptide mit unterschiedlichen Saccharidstrukturen und unterschiedlichen Chromophoren-Paaren synthetisiert wurden, gelang es nicht, diese in löslicher Form zu erhalten, was die Reinigung und dementsprechend die Analyse mittels FRET unmöglich machte. Weiterhin wurden Glycopetide ohne Chromophore mit unterschiedlichen Antigenmotiven synthetisiert, deren zellbiologische Untersuchung noch aussteht.

Structuring of polymer surface by evaporation of sessile microdrops

In this thesis, we investigated the evaporation of sessile microdroplets on different solid substrates. Three major aspects were studied: the influence of surface hydrophilicity and heterogeneity on the evaporation dynamics for an insoluble solid substrate, the influence of external process parameters and intrinsic material properties on microstructuring of soluble polymer substrates and the influence of an increased area to volume ratio in a microfluidic capillary, when evaporation is hindered. In the first part, the evaporation dynamics of pure sessile water drops on smooth self-assembled monolayers (SAMs) of thiols or disulfides on gold on mica was studied. With increasing surface hydrophilicity the drop stayed pinned longer. Thus, the total evaporation time of a given initial drop volume was shorter, since the drop surface, through which the evaporation occurs, stays longer large. Usually, for a single drop the volume decreased linearly with t1.5, t being the evaporation time, for a diffusion-controlled evaporation process. However, when we measured the total evaporation time, ttot, for multiple droplets with different initial volumes, V0, we found a scaling of the form V0 = attotb. The more hydrophilic the substrate was, the more showed the scaling exponent a tendency to an increased value up to 1.6. This can be attributed to an increasing evaporation rate through a thin water layer in the vicinity of the drop. Under the assumption of a constant temperature at the substrate surface a cooling of the droplet and thus a decreased evaporation rate could be excluded as a reason for the different scaling exponent by simulations performed by F. Schönfeld at the IMM, Mainz. In contrast, for a hairy surface, made of dialkyldisulfide SAMs with different chain lengths and a 1:1 mixture of hydrophilic and hydrophobic end groups (hydroxy versus methyl group), the scaling exponent was found to be ~ 1.4. It increased to ~ 1.5 with increasing hydrophilicity. A reason for this observation can only be speculated: in the case of longer hydrophobic alkyl chains the formation of an air layer between substrate and surface might be favorable. Thus, the heat transport to the substrate might be reduced, leading to a stronger cooling and thus decreased evaporation rate. In the second part, the microstructuring of polystyrene surfaces by drops of toluene, a good solvent, was investigated. For this a novel deposition technique was developed, with which the drop can be deposited with a syringe. The polymer substrate is lying on a motorized table, which picks up the pendant drop by an upward motion until a liquid bridge is formed. A consecutive downward motion of the table after a variable delay, i.e. the contact time between drop and polymer, leads to the deposition of the droplet, which can evaporate. The resulting microstructure is investigated in dependence of the processes parameters, i.e. the approach and the retraction speed of the substrate and the delay between them, and in dependence of the intrinsic material properties, i.e. the molar mass and the type of the polymer/solvent system. The principal equivalence with the microstructuring by the ink-jet technique was demonstrated. For a high approach and retraction speed of 9 mm/s and no delay between them, a concave microtopology was observed. In agreement with the literature, this can be explained by a flow of solvent and the dissolved polymer to the rim of the pinned droplet, where polymer is accumulated. This effect is analogue to the well-known formation of ring-like stains after the evaporation of coffee drops (coffee-stain effect). With decreasing retraction speed down to 10 µm/s the resulting surface topology changes from concave to convex. This can be explained with the increasing dissolution of polymer into the solvent drop prior to the evaporation. If the polymer concentration is high enough, gelation occurs instead of a flow to the rim and the shape of the convex droplet is received. With increasing delay time from below 0 ms to 1s the depth of the concave microwells decreases from 4.6 µm to 3.2 µm. However, a convex surface topology could not be obtained, since for longer delay times the polymer sticks to the tip of the syringe. Thus, by changing the delay time a fine-tuning of the concave structure is accomplished, while by changing the retraction speed a principal change of the microtopolgy can be achieved. We attribute this to an additional flow inside the liquid bridge, which enhanced polymer dissolution. Even if the pendant drop is evaporating about 30 µm above the polymer surface without any contact (non-contact mode), concave structures were observed. Rim heights as high as 33 µm could be generated for exposure times of 20 min. The concave structure exclusively lay above the flat polymer surface outside the structure even after drying. This shows that toluene is taken up permanently. The increasing rim height, rh, with increasing exposure time to the solvent vapor obeys a diffusion law of rh = rh0  tn, with n in the range of 0.46 ~ 0.65. This hints at a non-Fickian swelling process. A detailed analysis showed that the rim height of the concave structure is modulated, unlike for the drop deposition. This is due to the local stress relaxation, which was initiated by the increasing toluene concentration in the extruded polymer surface. By altering the intrinsic material parameters i.e. the polymer molar mass and the polymer/solvent combination, several types of microstructures could be formed. With increasing molar mass from 20.9 kDa to 1.44 MDa the resulting microstructure changed from convex, to a structure with a dimple in the center, to concave, to finally an irregular structure. This observation can be explained if one assumes that the microstructuring is dominated by two opposing effects, a decreasing solubility with increasing polymer molar mass, but an increasing surface tension gradient leading to instabilities of Marangoni-type. Thus, a polymer with a low molar mass close or below the entanglement limit is subject to a high dissolution rate, which leads to fast gelation compared to the evaporation rate. This way a coffee-rim like effect is eliminated early and a convex structure results. For high molar masses the low dissolution rate and the low polymer diffusion might lead to increased surface tension gradients and a typical local pile-up of polymer is found. For intermediate polymer masses around 200 kDa, the dissolution and evaporation rate are comparable and the typical concave microtopology is found. This interpretation was supported by a quantitative estimation of the diffusion coefficient and the evaporation rate. For a different polymer/solvent system, polyethylmethacrylate (PEMA)/ethylacetate (EA), exclusively concave structures were found. Following the statements above this can be interpreted with a lower dissolution rate. At low molar masses the concentration of PEMA in EA most likely never reaches the gelation point. Thus, a concave instead of a convex structure occurs. At the end of this section, the optically properties of such microstructures for a potential application as microlenses are studied with laser scanning confocal microscopy. In the third part, the droplet was confined into a glass microcapillary to avoid evaporation. Since here, due to an increased area to volume ratio, the surface properties of the liquid and the solid walls became important, the influence of the surface hydrophilicity of the wall on the interfacial tension between two immiscible liquid slugs was investigated. For this a novel method for measuring the interfacial tension between the two liquids within the capillary was developed. This technique was demonstrated by measuring the interfacial tensions between slugs of pure water and standard solvents. For toluene, n-hexane and chloroform 36.2, 50.9 and 34.2 mN/m were measured at 20°C, which is in a good agreement with data from the literature. For a slug of hexane in contact with a slug of pure water containing ethanol in a concentration range between 0 and 70 (v/v %), a difference of up to 6 mN/m was found, when compared to commercial ring tensiometry. This discrepancy is still under debate.

Capitale sociale e sistema del valore: Il caso del pesce azzurro in Puglia

The aim of my project is to find operational strategies for increasing the commercial exploitation of fish in Apulia region and to acquire a thorough knowledge of several important aspects of this system order to propose concrete, suitable and appropriate development tools. The plan is to analyze the impact that the socio-economic context has on blue fish systems of fishing and marketing in the various maritime regions. The sector of fishery is typified by a settled downward trend due to both communitarian policies driving towards a reduction of the fishery effort and to reduction of fishing resources. In the same time in Italy a increasing of costs (expecially fuel) and a reduction of market prices, because of the increasing of imports, are observed. Although a big part of Italian fishing fleet is to be referred to Apulia region, this dynamics are worsen, here, also because of market inefficiency and lack of integration and cooperation among fishermen. In this first part of my work I have investigated two areas that are relevant for regional fishery. On a first step I have evaluated fish amount for each kind of dealer working in each one of the two areas than, according to Porter's value chain analysis theory. Than i have applied the approach of value system to evaluate the value chains of the firm's supplier, the firm of fishery itself, and the firms distribution channels. Distribution of value has been resulted different but very unfavorable to fisherman in both investigated areas. The second step of my study has been the evaluation of the social capital value in both areas, defining the networks of fishery consistence and number of their mutual relationship. Results lay stress on a relation to an higher social capital value and a distribution of value system more profitable for fishermen.

Pädagogische, musikpädagogische und curriculare Semantiken in systemtheoretischer Betrachtung - zum Umgang mit populärer Musik an allgemeinbildenden Schulen in Deutschland nach 1945

Die Dissertation untersucht die geistige Produktion im Erziehungssystem anhand des Unterrichtsgegenstands populäre Musik. Hiermit ist sie im Kernbereich der musikpädagogischen Disziplin angesiedelt – Musik und Schule. Ferner rückt die Festlegung auf populäre Musik den Schüler in seinem Alltagswissen in den Vordergrund der Betrachtung. Die Frage nach dem Umgang mit populärer Musik ist somit indirekt eine Frage nach dem Umgang mit schülernahen Erfahrungswelten in der Schule. Innerhalb dieses Forschungsprofils erhält die Arbeit ihre eigentliche Relevanz - sie zeigt auf, wie eine moderne, selbstreferentielle Musikpädagogik eigene bedeutsame Kommunikationen beobachten kann. Entworfen in Anlehnung an die Systemtheorie nach Niklas Luhmann, werden in der Arbeit die unikalen Reflexionszusammenhänge von Pädagogik und Musikpädagogik anhand der folgenden Operationsfelder offengelegt: pädagogische und musikpädagogische Fachliteratur, Lehrpläne und Schulbücher. Nach Luhmann ist es erforderlich verstehend in die Unikalität systemischer Reflexionsleistungen einzudringen, um inkonsistente Anforderungen an die Aufgabe (Musik-)Erziehung und ihre Gegenstände aufzudecken und zukünftige Systemhandlungen zu optimieren. Die Arbeit ist in drei große historische Zeitblöcke gegliedert, die ihrerseits in verschiedene disziplinäre Operationsfelder unterteilt sind. Mit Hilfe dieser zweidimensionalen historisch-interdisziplinären Sichtweise wird populäre Musik als Bezugsgröße aufgewiesen, an der die zentralen Debatten von Pädagogik und Musikpädagogik kondensieren. Anhand von Schlüsselbegriffen wie Kultur, Gesellschaft und Ästhetik aber auch didaktischen Prinzipien wie Schüler- und Handlungsorientierung oder ganzheitliche (Musik-)Pädagogik lässt sich die Vielfalt historisch gewachsener inkonsistenter/konsistenter Forderungen belegen. Aus den Beobachtungen im Umgang mit populärer Musik werden Aufgaben deutlich, die die Disziplinen, vor allem die Musikpädagogik, in der Zukunft zu leisten haben. Diese beschäftigen sich auf der einen Seite mit dem disziplinären Selbstverständnis und auf der anderen Seite mit unbeantworteten didaktischen Fragestellungen wie den Möglichkeiten und Grenzen des einzelnen populären Musikstücks im konkret-situativen Lernkontext von Musikunterricht.

A study of two Languages for Active Objects with Futures

In computer systems, specifically in multithread, parallel and distributed systems, a deadlock is both a very subtle problem - because difficult to pre- vent during the system coding - and a very dangerous one: a deadlocked system is easily completely stuck, with consequences ranging from simple annoyances to life-threatening circumstances, being also in between the not negligible scenario of economical losses. Then, how to avoid this problem? A lot of possible solutions has been studied, proposed and implemented. In this thesis we focus on detection of deadlocks with a static program analysis technique, i.e. an analysis per- formed without actually executing the program. To begin, we briefly present the static Deadlock Analysis Model devel- oped for coreABS−− in chapter 1, then we proceed by detailing the Class- based coreABS−− language in chapter 2. Then, in Chapter 3 we lay the foundation for further discussions by ana- lyzing the differences between coreABS−− and ASP, an untyped Object-based calculi, so as to show how it can be possible to extend the Deadlock Analysis to Object-based languages in general. In this regard, we explicit some hypotheses in chapter 4 first by present- ing a possible, unproven type system for ASP, modeled after the Deadlock Analysis Model developed for coreABS−−. Then, we conclude our discussion by presenting a simpler hypothesis, which may allow to circumvent the difficulties that arises from the definition of the ”ad-hoc” type system discussed in the aforegoing chapter.

Speziation mikrobiologisch alkylierter, leichtflüchtiger Selenverbindungen in Abhängigkeit der geochemischen Verfügbarkeit des Selens

Selen kann in verschiedenen Oxidationszuständen (+6, +4, ±0, -2) in unterschiedlichen Umweltkompartimenten auftreten. Verbundenen damit sind verschiedene Eigenschaften, wie z. B. die Wasserlöslichkeit, die in direktem Zusammenhang mit der Migrationsfähigkeit sowie der Bioverfügbarkeit steht. Im Rahmen der vorliegenden Arbeit wurden die Verfügbarkeit anorganischer Selenspezies und damit die Mobilisierbarkeit dieser in verschiedenen Laborexperimenten untersucht. Hierbei wurde an Goethit adsorbiertes Selenit sowohl mit einer Reinkultur des aktiv methylierenden Pilzes Alternaria alternata als auch mit einer angereicherten Umweltmischkultur inkubiert und die mikrobiologische Zugänglichkeit anhand der Bildung leichtflüchtiger, alkylierter Selenmetabolite wie z. B. Dimethylselenid und Dimethyldiselenid beobachtet. Zur Analyse dieser wurde eine cryotrapping-cryofocussing-GC-ICP-MS-Kopplung etabliert. Die Anteile der methylierten Selenverbindungen stiegen bei Verwendung von A. alternata mit der Inkubationszeit auf 10 % des gelösten Selens und 1 % des Gesamtselens an. Dieser Trend konnte während der Inkubation der Umweltmischkultur nicht beobachtet werden. Hier lagen die Anteile über den gesamten Untersuchungszeitraum bei ca. 0,5 % des gelösten bzw. 0,1 % des Gesamtselens, inklusive eines leichten Abwärtstrends, welcher wahrscheinlich durch die Nutzung der Alkylselenide als Kohlenstoffquelle hervorgerufen wurde. Weiterhin wurde das reduzierte Eisenselenidmineral Ferroselit eingesetzt, um dessen Stabilität gegenüber der Aktivität des sulfatreduzierenden Bakteriums Desulfovibrio gigas zu untersuchen. Mit zunehmender Inkubationszeit und damit verbundener, zunehmender Reduktion des im Nährmedium vorhandenen Sulfates konnte ein Anstieg leichtflüchtiger Organoselenverbindungen in der Gasphase der Kulturansätze festgestellt werden, die im unteren Nanogrammbereich lagen. Einhergehend damit wurde auch die Zunahme der Gehalte an gelöstem Selen und somit die biologisch bedingte Rücklösung aus der Mineral- in die Wasserphase beobachtet. Es konnte gezeigt werden, dass die Aktivität von Mikroorganismen einen deutlichen Einfluss auf die Stabilität von Oberflächenkomplexen des Selenits als auch von mineralischen Selenidspezies hat.

Film di silicon oxinitride (sion) per applicazioni fotovoltaiche, studio di transizioni ottiche.

I materiali per applicazioni fotovoltaiche hanno destato un interesse crescente nella comunità scienti�ca negli ultimi decenni. Le celle HIT (Het- erojunction Intrinsic Thin Layer ) sono dispositivi di ultima generazione che hanno raggiunto e�cienza elevata mantenendo bassi i costi di pro- duzione, e impiegano silicio amorfo (a-Si) come strato emettitore per il suo buon assorbimento della luce e silicio cristallino come regione attiva. La struttura amorfa del silicio presenta però una bassa conducibilità, oltre ad e�etti di degradazione che limitano considerevolmente la durevolezza di una cella. Per questo motivo si stanno cercando possibili alternative al silicio amorfo, in particolare strutture multifase e composti di silicio, ossigeno ed azoto. In questo lavoro sono esposti i risultati dell'analisi di sottili lay- er di Silicon Oxynitride ossigenato (SiOx Ny :H), in forma microcristallina, deposti tramite PECVD (P lasma-Enhanced Chemical Vapor Deposition) su vetro presso l'università di Costanza. La forma microcristallina è una distribuzione di agglomerati cristallini dell'ordine di grandezza di un mi- crometro in una matrice di silicio amorfo, e attualmente le sue proprietà ottiche ed elettroniche non sono ancora state studiate in maniera appro- fondita. Nonostante ciò, è invece evidente che la fase microstallina non presenta tanti difetti intrinseci come la forma amorfa e ne è quindi una val- ida alternativa. In questa ottica, si è svolto uno studio sperimentale delle proprietà ottiche di layers in forma microcristallina di SiOx Ny :H, quali la misura del gap energetico. I risultati sperimentali, volti a trovare la dipen- denza delle caratteristiche dai parametri di deposizione dei layers, hanno mostrato una riduzione del gap energetico con la concentrazione di N2 O, uno dei gas precursori utilizzati nella deposizione dei layers in camera di processo. In conclusione si può dire che il μc−SiOx Ny :H ha le buone carat- teristiche tipiche dei semiconduttori cristallini, che unite alla possibilità di regolare il valore del gap energetico in base alle scelte in fase di deposizione, gli conferisce buone prospettive per applicazioni in celle fotovoltaiche, come emettitore in celle ad eterogiunzione.

Design and development of the new composite-material mainplane of the Dallara T12 race car

Abstract (US) Composite material components design and production techniques are discussed in the present graduation paper. In particular, this paper covers the design process and the production process of a carbon-fiber composite material component for a high performance car, more specifically, the Dallara T12 race car. This graduation paper is split in two. After a brief introduction on existing composite materials (their origins and applications), the first part of the present paper covers the main theoretical concepts behind the design of composite material components: particular focus will be given to carbon-fiber composites. The second part of the present paper covers the whole design and production process that the candidate carried out to create the new front mainplane of the Dallara T12 race car. This graduation paper is the result of a six-months-long internship that the candidate conducted as Design Office Trainee inside Dallara Automobili S.p.A. Abstract (ITA) La presente tesi di laurea discute le metodologie progettuali e produttive legate alla realizzazione di un componente in materiale composito. Nello specifico, viene discussa la progettazione e la produzione di un componente in fibra di carbonio destinato ad una vettura da competizione. La vettura in esame è la Dallara T12. Il lavoro è diviso in due parti. Nella prima parte, dopo una breve introduzione sull’origine e le tipologie di materiali compositi esistenti, vengono trattati i concetti teorici fondamentali su cui si basa la progettazione di generici componenti in materiale composito, con particolare riguardo ai materiali in fibra di carbonio. Nella seconda parte viene discusso tutto il processo produttivo che il candidato ha portato a termine per realizzare il nuovo alettone anteriore della Dallara T12. La presente tesi di laurea è il risultato del lavoro di progettazione che il candidato ha svolto presso l’Ufficio Tecnico di Dallara Automobili S.p.A. nel corso di un tirocinio formativo di sei mesi.

Interacting bosons and fermions in three-dimensional optical lattice potentials

This thesis reports on the realization, characterization and analysis of ultracold bosonic and fermionic atoms in three-dimensional optical lattice potentials. Ultracold quantum gases in optical lattices can be regarded as ideal model systems to investigate quantum many-body physics. In this work interacting ensembles of bosonic 87Rb and fermionic 40K atoms are employed to study equilibrium phases and nonequilibrium dynamics. The investigations are enabled by a versatile experimental setup, whose core feature is a blue-detuned optical lattice that is combined with Feshbach resonances and a red-detuned dipole trap to allow for independent control of tunneling, interactions and external confinement. The Fermi-Hubbard model, which plays a central role in the theoretical description of strongly correlated electrons, is experimentally realized by loading interacting fermionic spin mixtures into the optical lattice. Using phase-contrast imaging the in-situ size of the atomic density distribution is measured, which allows to extract the global compressibility of the many-body state as a function of interaction and external confinement. Thereby, metallic and insulating phases are clearly identified. At strongly repulsive interaction, a vanishing compressibility and suppression of doubly occupied lattice sites signal the emergence of a fermionic Mott insulator. In a second series of experiments interaction effects in bosonic lattice quantum gases are analyzed. Typically, interactions between microscopic particles are described as two-body interactions. As such they are also contained in the single-band Bose-Hubbard model. However, our measurements demonstrate the presence of multi-body interactions that effectively emerge via virtual transitions of atoms to higher lattice bands. These findings are enabled by the development of a novel atom optical measurement technique: In quantum phase revival spectroscopy periodic collapse and revival dynamics of the bosonic matter wave field are induced. The frequencies of the dynamics are directly related to the on-site interaction energies of atomic Fock states and can be read out with high precision. The third part of this work deals with mixtures of bosons and fermions in optical lattices, in which the interspecies interactions are accurately controlled by means of a Feshbach resonance. Studies of the equilibrium phases show that the bosonic superfluid to Mott insulator transition is shifted towards lower lattice depths when bosons and fermions interact attractively. This observation is further analyzed by applying quantum phase revival spectroscopy to few-body systems consisting of a single fermion and a coherent bosonic field on individual lattice sites. In addition to the direct measurement of Bose-Fermi interaction energies, Bose-Bose interactions are proven to be modified by the presence of a fermion. This renormalization of bosonic interaction energies can explain the shift of the Mott insulator transition. The experiments of this thesis lay important foundations for future studies of quantum magnetism with fermionic spin mixtures as well as for the realization of complex quantum phases with Bose-Fermi mixtures. They furthermore point towards physics that reaches beyond the single-band Hubbard model.

Quantitative risk analysis as a tool in process design

La Quantitative Risk Analysis costituisce un valido strumento per la determinazione del rischio associato ad un’installazione industriale e per la successiva attuazione di piani di emergenza. Tuttavia, la sua applicazione nella progettazione di un lay-out richiede la scelta di un criterio in grado di valutare quale sia la disposizione ottimale al fine di minimizzare il rischio. In tal senso, le numerose procedure esistenti, sebbene efficaci, risultano piuttosto faticose e time-consuming. Nel presente lavoro viene dunque proposto un criterio semplice ed oggettivo per comparare i risultati di QRA applicate a differenti designs. Valutando l’area racchiusa nelle curve iso-rischio, vengono confrontate dapprima le metodologie esistenti per lo studio dell’effetto domino, e successivamente, viene applicata al caso di serbatoi in pressione una procedura integrata di Quantitative Risk Domino Assessment. I risultati ottenuti dimostrano chiaramente come sia possibile ridurre notevolmente il rischio di un’attività industriale agendo sulla disposizione delle apparecchiature, con l’obiettivo di limitare gli effetti di possibili scenari accidentali.

Progettazione del layout di un nuovo stabilimento produttivo: il caso Fiorini Industries S.r.l.

Progettazione del nuovo layout per un nuovo stabilimento produttivo, in cui il gruppo Fiorini Industries S.r.l., in un'ottica di espansione e miglioramento dei parametri tecnici e dei flussi aziendali, si insedia lasciando la sua storica sede produttiva. Questo bisogno nasce dall'impossibilità di espansione dello stabilimento odierno e dalla necessità di ridurre i costi di movimentazione dei materiali durante il ciclo di produzione. La tesi si colloca in questo contesto di necessità di verificare le prestazioni del lay-out attuale, valutandone le problematiche e le criticità al fine di potere identificare delle valide soluzioni di layout per la nuova sede produttiva dal punto di vista tecnico-economico e ambientale. Il CAPITOLO1 è volto ad inquadrare il problema affrontato nella situazione odierna; mettendo in evidenza la rilevanza del lay-out. Viene poi spiegato in maniera approfondita l'approccio di progettazione seguito. Al CAPITOLO 2 spetta la presentazione dell'azienda, della sua storia, della sua gamma di prodotti e dei suoi reparti di lavorazione. L'inquadramento aziendale è necessario al fine di capire le esigenze aziendali di cui si dovrà tenere conto durante lo svolgimento del lavoro. Nel CAPITOLO 3 si procede con l'analisi della situazione attuale, recuperando i dati di input necessari alla determinazione del mix produttivo offerto al mercato, quindi con l'analisi dei cicli produttivi, dei flussi e delle risorse impiegate per le movimentazioni. Il CAPITOLO 4 illustra il nuovo polo industriale del gruppo e presenta le alternative di lay-out individuate, che vengono analizzate dal punto di vista economico per individuare il possibile saving economico annuo rispetto alla situazione attuale. Per completezza di informazione vengono presentate anche aree che non vengono progettate tramite l'analisi tecnico economica (Blocco 2 e Uffici). Il capitolo termina con la scelta del nuovo layout per la nuova sede, dove vengono studiati i saving annui in base ai mezzi di movimentazioni attuali e quelli implementabili. L'ultima parte dell'elaborato valuta le emissioni di anidride carbonica dovute alle movimentazioni interne e valuta la possibile riduzione di emissioni di CO2 con il nuovo layout.

Experimental characterization of carbon-fiber-reinforced polymer laminates

The goal of this thesis is to make static tensile test on four Carbon Fiber Reinforced Polymer laminates, in such a way as to obtain the ultimate tensile strength of these laminates; in particular, the laminates analyzed were produced by Hand Lay-up technology. Testing these laminates we have a reference point on which to compare other laminates and in particular CFRP laminate produced by RTM technology.

Eggshell colour is more strongly affected by maternal identity than by dietary antioxidants in a captive poultry system

1.Biologists have long puzzled over the apparent conspicuousness of blue-green eggshell coloration in birds. One candidate explanation is the sexual signalling hypothesis that the blue-green colour of eggshells can reveal an intrinsic aspect of females' physiological quality, with only high-quality females having sufficient antioxidant capacity to pigment their eggs with large amounts of biliverdin. Subsequent work has argued instead that eggshell colour might signal condition-dependent traits based on diet. 2.Using Araucana chickens that lay blue-green eggs, we explored (i) whether high levels of dietary antioxidants yield eggshells with greater blue-green reflectance, (ii) whether females differ from one another in eggshell coloration despite standardized environments, diets and rearing conditions, and (iii) the relative strength with which diet vs. female identity affects eggshell coloration. 3.We reared birds to maturity and then placed them on either a high- or low-antioxidant diet, differing fourfold in Vitamin E acetate and Vitamin A retinol. After 8 weeks, the treatments were reversed, such that females laid eggs on both diets in an order-balanced design. We measured the reflectance spectra of 545 eggs from 25 females. 4.Diet had a very limited effect on eggshell spectral reflectance, but individual females differed strongly and consistently from one another, despite having been reared under uniform conditions. However, predictions from avian visual modelling suggest that most of the egg colour differences between females, and nearly all of the differences between diets, are unlikely to be visually discriminable. 5.Our data suggest that eggshell reflectance spectra may carry information on intrinsic properties of the female that laid the eggs, but the utility of this coloration as a signal to conspecifics in this species may be limited by the sensitivity of a receiver to detect it.

Block of the hERG channel by bupivacaine: Electrophysiological and modeling insights towards stereochemical optimization

The hERG voltage-gated potassium channel mediates the cardiac I(Kr) current, which is crucial for the duration of the cardiac action potential. Undesired block of the channel by certain drugs may prolong the QT interval and increase the risk of malignant ventricular arrhythmias. Although the molecular determinants of hERG block have been intensively studied, not much is known about its stereoselectivity. Levo-(S)-bupivacaine was the first drug reported to have a higher affinity to block hERG than its enantiomer. This study strives to understand the principles underlying the stereoselectivity of bupivacaine block with the help of mutagenesis analyses and molecular modeling simulations. Electrophysiological measurements of mutated hERG channels allowed for the identification of residues involved in bupivacaine binding and stereoselectivity. Docking and molecular mechanics simulations for both enantiomers of bupivacaine and terfenadine (a non-stereoselective blocker) were performed inside an open-state model of the hERG channel. The predicted binding modes enabled a clear depiction of ligand-protein interactions. Estimated binding affinities for both enantiomers were consistent with electrophysiological measurements. A similar computational procedure was applied to bupivacaine enantiomers towards two mutated hERG channels (Tyr652Ala and Phe656Ala). This study confirmed, at the molecular level, that bupivacaine stereoselectively binds the hERG channel. These results help to lay the foundation for structural guidelines to optimize the cardiotoxic profile of drug candidates in silico.