Impacts of elevated CO2 on particulate and dissolved organic matter production: microcosm experiments using iron-deficient plankton communities in open subarctic waters

Response of phytoplankton to increasing CO2 in seawater in terms of physiology and ecology is key to predicting changes in marine ecosystems. However, responses of natural plankton communities especially in the open ocean to higher CO2 levels have not been fully examined. We conducted CO2 manipulation experiments in the Bering Sea and the central subarctic Pacific, known as high nutrient and low chlorophyll regions, in summer 2007 to investigate the response of organic matter production in iron-deficient plankton communities to CO2 increases. During the 14-day incubations of surface waters with natural plankton assemblages in microcosms under multiple pCO2 levels, the dynamics of particulate organic carbon (POC) and nitrogen (PN), and dissolved organic carbon (DOC) and phosphorus (DOP) were examined with the plankton community compositions. In the Bering site, net production of POC, PN, and DOP relative to net chlorophyll-a production decreased with increasing pCO2. While net produced POC:PN did not show any CO2-related variations, net produced DOC:DOP increased with increasing pCO2. On the other hand, no apparent trends for these parameters were observed in the Pacific site. The contrasting results observed were probably due to the different plankton community compositions between the two sites, with plankton biomass dominated by large-sized diatoms in the Bering Sea versus ultra-eukaryotes in the Pacific Ocean. We conclude that the quantity and quality of the production of particulate and dissolved organic matter may be altered under future elevated CO2 environments in some iron-deficient ecosystems, while the impacts may be negligible in some systems.

Global distributions of Phaeocystis sp. abundance and biomass - Gridded data product (NetCDF) - Contribution to the MAREDAT World Ocean Atlas of Plankton Functional Types

The planktonic haptophyte Phaeocystis has been suggested to play a fundamental role in the global biogeochemical cycling of carbon and sulphur, but little is known about its global biomass distribution. We have collected global microscopy data of the genus Phaeocystis and converted abundance data to carbon biomass using species-specific carbon conversion factors. Microscopic counts of single-celled and colonial Phaeocystis were obtained both through the mining of online databases and by accepting direct submissions (both published and unpublished) from Phaeocystis specialists. We recorded abundance data from a total of 1595 depth-resolved stations sampled between 1955-2009. The quality-controlled dataset includes 5057 counts of individual Phaeocystis cells resolved to species level and information regarding life-stages from 3526 samples. 83% of stations were located in the Northern Hemisphere while 17% were located in the Southern Hemisphere. Most data were located in the latitude range of 50-70° N. While the seasonal distribution of Northern Hemisphere data was well-balanced, Southern Hemisphere data was biased towards summer months. Mean species- and form-specific cell diameters were determined from previously published studies. Cell diameters were used to calculate the cellular biovolume of Phaeocystis cells, assuming spherical geometry. Cell biomass was calculated using a carbon conversion factor for Prymnesiophytes (Menden-Deuer and Lessard, 2000). For colonies, the number of cells per colony was derived from the colony volume. Cell numbers were then converted to carbon concentrations. An estimation of colonial mucus carbon was included a posteriori, assuming a mean colony size for each species. Carbon content per cell ranged from 9 pg (single-celled Phaeocystis antarctica) to 29 pg (colonial Phaeocystis globosa). Non-zero Phaeocystis cell biomasses (without mucus carbon) range from 2.9 - 10?5 µg l-1 to 5.4 - 103 µg l-1, with a mean of 45.7 µg l-1 and a median of 3.0 µg l-1. Highest biomasses occur in the Southern Ocean below 70° S (up to 783.9 µg l-1), and in the North Atlantic around 50° N (up to 5.4 - 103 µg l-1).

Aiming at improving access to research output through the institutional repository

The paper is to introduce the institutional repository (IR) as a powerful tool to support the researchers of the institution to archive and disseminate their research findings freely to the scholarly community on the Internet. The IR can improve the access to an institution’s research output enormously. The operations of an IR also require various interactions with researchers, which enables the library to gain a solid understanding of research needs and expectations. Through such interaction, the relationship and mutual trust between researchers and the library are strengthened. The experiences of the Institute of Developing Economies (IDE) library can be useful to other special libraries.

Seed Dispersal Spectrum of Woody Species in South Ecuadorian Dry Forests: Environmental Correlates and the Effect of Considering Species Abundance

This study examines the seed dispersal spectrum of the tropical dry forests of Southern Ecuador, in an effort to contribute to the knowledge of the complex dynamics of tropical dry forests. Seed dispersal spectrum was described for a total number of 160 species. Relationships of dispersal syndromes with plant growth form and climatic seasonality were explored. For a subset of 97 species, we determined whether dispersal spectrum changes when species abundance, in addition to species number, is taken into account. The same subset was used to relate dispersal syndromes with the environmental conditions. Zoochorous species dominated in the studied community. When considering the individual abundance of each species, however, anemochory was the prevalent dispersal syndrome. We found a significant difference in the frequency of dispersal syndromes among plant growth forms, with epizoochory only occurring in shrub species. The dispersal spectrum was dependent on climatic seasonality. The largest proportion of anemochorous species fructified during the dry season, while zoochorous diaspores dominated during the rainy season. A fourth-corner analysis indicated that the seed dispersal spectrum of Southern Ecuador dry forests is controlled by environmental conditions such as annual precipitation, annual temperature range or topography. Our results suggest that spatio-temporal changes in the environmental conditions may affect important ecological processes for dispersal. Thus, the predominance of one syndrome or another may depend on the spatial variation of environmental conditions.

Auto component supply chain: a path to global India

Supply chain management works to bring the supplier, the distributor, and the customer into one cohesive process. The Supply Chain Council defined supply chain as ‘Supply Chain: The flow and transformation of raw materials into products from suppliers through production and distribution facilities to the ultimate consumer., and then Sunil Chopra and Meindl, (2001) have define Supply chain management as ‘Supply Chain Management involves the flows between and among stages in a supply chain to maximize total profitability.’ After 1950, supply chain management got a boost with the production and manufacturing sector getting highest attention. The inventory became the responsibility of the marketing, accounting and production areas. Order processing was part of accounting and sales. Supply chain management became one of the most powerful engines of business transformation. It is the one area where operational efficiency can be gained. It reduces organizations costs and enhances customer service. With the liberalization of world trade, globalization, and emergence of the new markets, many organizations have customers and competitions throughout the world, either directly or indirectly. Business communities are aware that global competitiveness is the key to the success of a business. Competitiveness is ability to produce, distribute and provide products and services for the open market in competition with others. The supply chain, a critical link between supplier, producer and customer is emerged now as an essential business process and a strategic lever, potential value contributor a differentiator for the success of any business. Supply chain management is the management of all internal and external processes or functions to satisfy a customer’s order (from raw materials through conversion and manufacture through logistics delivery.). Goods-either in raw form or processed, whole sale or retailed distribution, business or technology services, in everyday life- in the business or household- directly or indirectly supply chain is ubiquitously associated in expanding socio-economic development. Supply chain growth competitive performance and supporting strong growth impulse at micro as well as micro economic levels. Keeping the India vision at the core of the objective, the role of supply chain is to take up social economic challenges, improve competitive advantages, develop strategies, built capabilities, enhance value propositions, adapt right technology, collaborate with stakeholders and deliver environmentally sustainable outcomes with minimum resources.

A Lagrangian descriptor applied to the Kuroshio current

The understanding of the circulation of ocean currents, the exchange of CO2 between atmosphere and oceans, and the in uence of the oceans on the distribution of heat on a global scale is key to our ability to predict and assess the future evolution of climate.

Bases metodológicas para un sistema de apoyo a la selección de especies en la restauración de la vegetación

RESUMEN El apoyo a la selección de especies a la restauración de la vegetación en España en los últimos 40 años se ha basado fundamentalmente en modelos de distribución de especies, también llamados modelos de nicho ecológico, que estiman la probabilidad de presencia de las especies en función de las condiciones del medio físico (clima, suelo, etc.). Con esta tesis se ha intentado contribuir a la mejora de la capacidad predictiva de los modelos introduciendo algunas propuestas metodológicas adaptadas a los datos disponibles actualmente en España y enfocadas al uso de los modelos en la selección de especies. No siempre se dispone de datos a una resolución espacial adecuada para la escala de los proyectos de restauración de la vegetación. Sin embrago es habitual contar con datos de baja resolución espacial para casi todas las especies vegetales presentes en España. Se propone un método de recalibración que actualiza un modelo de regresión logística de baja resolución espacial con una nueva muestra de alta resolución espacial. El método permite obtener predicciones de calidad aceptable con muestras relativamente pequeñas (25 presencias de la especie) frente a las muestras mucho mayores (más de 100 presencias) que requería una estrategia de modelización convencional que no usara el modelo previo. La selección del método estadístico puede influir decisivamente en la capacidad predictiva de los modelos y por esa razón la comparación de métodos ha recibido mucha atención en la última década. Los estudios previos consideraban a la regresión logística como un método inferior a técnicas más modernas como las de máxima entropía. Los resultados de la tesis demuestran que esa diferencia observada se debe a que los modelos de máxima entropía incluyen técnicas de regularización y la versión de la regresión logística usada en las comparaciones no. Una vez incorporada la regularización a la regresión logística usando penalización, las diferencias en cuanto a capacidad predictiva desaparecen. La regresión logística penalizada es, por tanto, una alternativa más para el ajuste de modelos de distribución de especies y está a la altura de los métodos modernos con mejor capacidad predictiva como los de máxima entropía. A menudo, los modelos de distribución de especies no incluyen variables relativas al suelo debido a que no es habitual que se disponga de mediciones directas de sus propiedades físicas o químicas. La incorporación de datos de baja resolución espacial proveniente de mapas de suelo nacionales o continentales podría ser una alternativa. Los resultados de esta tesis sugieren que los modelos de distribución de especies de alta resolución espacial mejoran de forma ligera pero estadísticamente significativa su capacidad predictiva cuando se incorporan variables relativas al suelo procedente de mapas de baja resolución espacial. La validación es una de las etapas fundamentales del desarrollo de cualquier modelo empírico como los modelos de distribución de especies. Lo habitual es validar los modelos evaluando su capacidad predictiva especie a especie, es decir, comparando en un conjunto de localidades la presencia o ausencia observada de la especie con las predicciones del modelo. Este tipo de evaluación no responde a una cuestión clave en la restauración de la vegetación ¿cuales son las n especies más idóneas para el lugar a restaurar? Se ha propuesto un método de evaluación de modelos adaptado a esta cuestión que consiste en estimar la capacidad de un conjunto de modelos para discriminar entre las especies presentes y ausentes de un lugar concreto. El método se ha aplicado con éxito a la validación de 188 modelos de distribución de especies leñosas orientados a la selección de especies para la restauración de la vegetación en España. Las mejoras metodológicas propuestas permiten mejorar la capacidad predictiva de los modelos de distribución de especies aplicados a la selección de especies en la restauración de la vegetación y también permiten ampliar el número de especies para las que se puede contar con un modelo que apoye la toma de decisiones. SUMMARY During the last 40 years, decision support tools for plant species selection in ecological restoration in Spain have been based on species distribution models (also called ecological niche models), that estimate the probability of occurrence of the species as a function of environmental predictors (e.g., climate, soil). In this Thesis some methodological improvements are proposed to contribute to a better predictive performance of such models, given the current data available in Spain and focusing in the application of the models to selection of species for ecological restoration. Fine grained species distribution data are required to train models to be used at the scale of the ecological restoration projects, but this kind of data are not always available for every species. On the other hand, coarse grained data are available for almost every species in Spain. A recalibration method is proposed that updates a coarse grained logistic regression model using a new fine grained updating sample. The method allows obtaining acceptable predictive performance with reasonably small updating sample (25 occurrences of the species), in contrast with the much larger samples (more than 100 occurrences) required for a conventional modeling approach that discards the coarse grained data. The choice of the statistical method may have a dramatic effect on model performance, therefore comparisons of methods have received much interest in the last decade. Previous studies have shown a poorer performance of the logistic regression compared to novel methods like maximum entropy models. The results of this Thesis show that the observed difference is caused by the fact that maximum entropy models include regularization techniques and the versions of logistic regression compared do not. Once regularization has been added to the logistic regression using a penalization procedure, the differences in model performance disappear. Therefore, penalized logistic regression may be considered one of the best performing methods to model species distributions. Usually, species distribution models do not consider soil related predictors because direct measurements of the chemical or physical properties are often lacking. The inclusion of coarse grained soil data from national or continental soil maps could be a reasonable alternative. The results of this Thesis suggest that the performance of the models slightly increase after including soil predictors form coarse grained soil maps. Model validation is a key stage of the development of empirical models, such as species distribution models. The usual way of validating is based on the evaluation of model performance for each species separately, i.e., comparing observed species presences or absence to predicted probabilities in a set of sites. This kind of evaluation is not informative for a common question in ecological restoration projects: which n species are the most suitable for the environment of the site to be restored? A method has been proposed to address this question that estimates the ability of a set of models to discriminate among present and absent species in a evaluation site. The method has been successfully applied to the validation of 188 species distribution models used to support decisions on species selection for ecological restoration in Spain. The proposed methodological approaches improve the predictive performance of the predictive models applied to species selection in ecological restoration and increase the number of species for which a model that supports decisions can be fitted.

A methodology proposal to obtain operational parameter forecasts and operational risk assessment in container terminals

Las terminales de contenedores son sistemas complejos en los que un elevado número de actores económicos interactúan para ofrecer servicios de alta calidad bajo una estricta planificación y objetivos económicos. Las conocidas como "terminales de nueva generación" están diseñadas para prestar servicio a los mega-buques, que requieren tasas de productividad que alcanzan los 300 movimientos/ hora. Estas terminales han de satisfacer altos estándares dado que la competitividad entre terminales es elevada. Asegurar la fiabilidad de las planificaciones del atraque es clave para atraer clientes, así como reducir al mínimo el tiempo que el buque permanece en el puerto. La planificación de las operaciones es más compleja que antaño, y las tolerancias para posibles errores, menores. En este contexto, las interrupciones operativas deben reducirse al mínimo. Las principales causas de dichas perturbaciones operacionales, y por lo tanto de incertidumbre, se identifican y caracterizan en esta investigación. Existen una serie de factores que al interactuar con la infraestructura y/o las operaciones desencadenan modos de fallo o parada operativa. Los primeros pueden derivar no solo en retrasos en el servicio sino que además puede tener efectos colaterales sobre la reputación de la terminal, o incluso gasto de tiempo de gestión, todo lo cual supone un impacto para la terminal. En el futuro inmediato, la monitorización de las variables operativas presenta gran potencial de cara a mejorar cualitativamente la gestión de las operaciones y los modelos de planificación de las terminales, cuyo nivel de automatización va en aumento. La combinación del criterio experto con instrumentos que proporcionen datos a corto y largo plazo es fundamental para el desarrollo de herramientas que ayuden en la toma de decisiones, ya que de este modo estarán adaptadas a las auténticas condiciones climáticas y operativas que existen en cada emplazamiento. Para el corto plazo se propone una metodología con la que obtener predicciones de parámetros operativos en terminales de contenedores. Adicionalmente se ha desarrollado un caso de estudio en el que se aplica el modelo propuesto para obtener predicciones de la productividad del buque. Este trabajo se ha basado íntegramente en datos proporcionados por una terminal semi-automatizada española. Por otro lado, se analiza cómo gestionar, evaluar y mitigar el efecto de las interrupciones operativas a largo plazo a través de la evaluación del riesgo, una forma interesante de evaluar el effecto que eventos inciertos pero probables pueden generar sobre la productividad a largo plazo de la terminal. Además se propone una definición de riesgo operativo junto con una discusión de los términos que representan con mayor fidelidad la naturaleza de las actividades y finalmente, se proporcionan directrices para gestionar los resultados obtenidos. Container terminals are complex systems where a large number of factors and stakeholders interact to provide high-quality services under rigid planning schedules and economic objectives. The socalled next generation terminals are conceived to serve the new mega-vessels, which are demanding productivity rates up to 300 moves/hour. These terminals need to satisfy high standards because competition among terminals is fierce. Ensuring reliability in berth scheduling is key to attract clients, as well as to reduce at a minimum the time that vessels stay the port. Because of the aforementioned, operations planning is becoming more complex, and the tolerances for errors are smaller. In this context, operational disturbances must be reduced at a minimum. The main sources of operational disruptions and thus, of uncertainty, are identified and characterized in this study. External drivers interact with the infrastructure and/or the activities resulting in failure or stoppage modes. The later may derive not only in operational delays but in collateral and reputation damage or loss of time (especially management times), all what implies an impact for the terminal. In the near future, the monitoring of operational variables has great potential to make a qualitative improvement in the operations management and planning models of terminals that use increasing levels of automation. The combination of expert criteria with instruments that provide short- and long-run data is fundamental for the development of tools to guide decision-making, since they will be adapted to the real climatic and operational conditions that exist on site. For the short-term a method to obtain operational parameter forecasts in container terminals. To this end, a case study is presented, in which forecasts of vessel performance are obtained. This research has been entirely been based on data gathered from a semi-automated container terminal from Spain. In the other hand it is analyzed how to manage, evaluate and mitigate disruptions in the long-term by means of the risk assessment, an interesting approach to evaluate the effect of uncertain but likely events on the long-term throughput of the terminal. In addition, a definition for operational risk evaluation in port facilities is proposed along with a discussion of the terms that better represent the nature of the activities involved and finally, guidelines to manage the results obtained are provided.

Posibilidades de cultivo de nuevas especies marinas en el área mediterránea

La acuicultura, el cultivo y cría de animales y plantas acuáticas, representa en la actualidad una fuente esencial de proteína animal y vegetal altamente saludable y nutritiva, proporcionando un sistema de vida y de ingresos en todo el mundo. La acuicultura además de ser un motor para el desarrollo social y económico de las áreas costeras marinas y fluviales mundiales, supone en muchas regiones subdesarrolladas una garantía de alimento de alta calidad y es clave en la seguridad alimentaria de sus poblaciones. El desarrollo de la acuicultura se ha realizado fundamentalmente en los últimos 50 años, y ha sido sobre todo en la década de los años 80, cuando la acuicultura ha experimentado un fuerte crecimiento con tasas anuales que superan el 6%. Con el estancamiento de la producción pesquera y el incremento de la población mundial, la acuicultura se presenta como la única fuente posible de suministro de proteínas (vegetales y animales) de alta calidad, ricas en aceites omega 3 (EPA y DHA) de origen acuático. En la actualidad la producción procedente de la acuicultura supera los 95 millones de toneladas anuales, siendo ligeramente superior a los 94 millones de toneladas anuales provenientes de la pesca extractiva. De este total mundial acuícola, la producción asiática representa el 89%, mientras que la europea el 4,2% Aunque el 46% de la producción mundial acuícola se concentra únicamente en solo 10 especies, una de las principales características de la acuicultura es la gran diversidad de especies cultivadas, más de 500, realizándose su cría bajo diferentes tecnologías y sistemas productivos. El ámbito de esta tesis, es únicamente la acuicultura marina que se desarrolla en las aguas del mar mediterráneo, indistintamente de los sistemas y tecnología de producción utilizados. Los principales grupos de cultivo que se realizan en las aguas del Mediterráneo son los moluscos y los peces, siendo muy escasos los cultivos de otros grupos como crustáceos y macroalgas. La piscicultura marina mediterránea está dominada por el cultivo en jaulas flotantes de dos especies, la dorada (Sparus auratus) y la lubina (Dicentrarchus labrax). Estas dos especies y tras 30 años de experiencia de cultivo, mantienen todavía una ineficiencia productiva alta (reducida selección genética, lento crecimiento hasta talla comercial, alto factor de conversón del pienso…) y además ocupan un estrecho nicho de mercado, ya que prácticamente toda la comercialización de la dorada y lubina se realiza en fresco y sin elaborar ni transformar, a una talla media de 500 g. Para dar respuesta desde la acuicultura mediterránea al alto consumo y a la creciente demanda que en la Unión Europea existe de los productos acuícolas, y en especial los productos elaborados y transformados, es necesario de manera urgente, un aumento de la producción de las especies ya cultivadas (dorada y lubina) mediante la mejora de su eficiencia productiva, al mismo tiempo que se debe iniciar la producción industrial de nuevas especies piscícolas, mediante la diversificación de los cultivos. Para llevar a cabo esta diversificación, se hace necesario el establecimiento de una metodología clara, que asegure una selección de especies apropiadas y rentables para la industria acuícola mediterránea, cuyo cultivo sostenible debiera cumplir con los desafíos que el sector tiene. Nuevas especies que complementen y cubran las demandas actuales y futuras del mercado Europeo e Internacional de productos acuícolas. Nuevas especies con parámetros productivos eficientes, que garanticen unos costes productivos competitivos. Nuevas especies que puedan ser cultivadas utilizando como base la tecnología de producción ya existente en el sector. El objetivo de esta tesis es la definición y desarrollo de una metodología sencilla para la selección de nuevas especies piscícolas marinas para su cultivo eficiente y sostenible Y bajo la aplicación de esta metodología, la selección de un grupo de especies piscícolas para su cultivo rentable a corto y medio plazo (6-8 años) en el Mediterráneo. Para ello se ha definido y aplicado una metodología con la que se han evaluado diez especies candidatas, previamente escogidas de una serie de listas previas originadas en los distintos estudios y trabajos de diversificación realizados con anterioridad por otros equipos de investigación. Estas especies candidatas han sido: Seriola dumerili. (Seriola) , Argyrosomus regius (Corvina), Polyprion americanus (Cherna), Ephinephelus marginatus (Mero), Dentex dentex (Dentón), Pagrus pagrus (Pargo), Solea senegalensis (Lenguado del Senegal), Thunnus thynnus (Atún rojo), Mugil cephalus (Lisa), Coryphaena hippurus (Lampuga). El conjunto de estas especies ocupa un amplio y variado espectro dentro de las distintas áreas de mercado, productiva, tecnológica, y medioambiental . Y en todas ellas existe una experiencia mínima en sus diferentes fases de cultivo. En el desarrollo de la metodología de selección, en esta tesis se han definido diversos parámetros de evaluación, considerados como los más significativos y sencillos de aplicar. Los parámetros se han agrupado en tres bloques, el comercial, el productivo y el medioambiental. El Bloque de Mercado, comprende aquellos criterios que están relacionados con la comercialización de la especie. Calidad de la carne del pescado. Competencia con otras especies en el mercado. Potencial de Transformado. Precio de venta del pescado. El bloque Medioambiental incluye criterios del grado de idoneidad de la especie en la región y del grado de impacto ambiental de su cultivo. Rango de temperaturas del agua óptimo para el cultivo. Potencial impacto ambiental de su cultivo. Eslabón trófico de la especie.. El bloque Productivo, engloba los criterios y parámetros relacionados con el nivel de conocimiento y control que sobre su cultivo existen ( larvario, engorde, tecnología) Grado de control de la fase larvaria. Disponibilidad de alevines en el sector Crecimiento. Factor de conversión Aprovechamiento de la capacidad productiva instalada, Coste de inversión. Previa a la evaluación se han descrito las principales características de las especies candidatas en función del estado y experiencia actual sus cultivos. En la aplicación de estos criterios se han establecido matrices de evaluación y a cada criterio se le ha asignado un valor diferente en función de sus características y propiedades selectivas. Los resultados obtenidos mediante la aplicación de la metodología de evaluación propuesta, han señalado la seriola y la corvina como especies más recomendadas para su puesta en cultivo en el Mediterráneo a corto y medio plazo. Las otras dos especies seleccionadas han sido la lisa y la lampuga. Como conclusión final podemos señalar que el cultivo de nuevas especies es fundamentalmente para el desarrollo sostenible de la acuicultura mediterránea. Esta diversificación debe basarse en la aplicación de una metodología sencilla y práctica, que garantice una selección de especies cuyo cultivo sea rentable y abarquen nuevos segmentos de mercado. ABSTRACT Aquaculture, the cultivation and breeding of aquatic animals and plants, currently represents an essential source of highly nutritious and healthy protein that provides a way of life and income all over the world. Apart from being a social and economic driver in coastal and marine areas, it also entails a guaranteed high quality nourishment in many undeveloped areas being key to the alimentary safety of their population. Aquaculture has developed mainly in the last 50 years and experienced a high growth especially during the Eighties when the annual rates were above 6%. With fishing production stagnating and the global population increasing, aquaculture emerges as the only possible animal and vegetable protein source of aquatic origin, high in quality and omega 3 oils (EPA and DHA). Here and now, aquaculture production is over 95 million tons per year, which is slightly higher than the 94 million tons per year that come from extractive fisheries. From this aquaculture total, Asiatic production represents 89% while Europe´s is only 4.2%. Even though 46% of the global aquaculture production focuses just on 10 species, one of the main characteristics of aquaculture is the wide diversity of cultivated species –over 500– using different technologies and production systems. This PhD’s scope is only marine aquaculture in Mediterranean water, regardless of the technology or systems used. The main crop groups in the Mediterranean sea are molluscs and finfish, while crustacean and macroalgae cultivations are very limited. Mediterranean fish culture is dominated by the cultivation in floating cages of two species: Bream (Sparus auratus) and Bass (Dicentrarchus labrax). After 30 years of farming, these two species still keep a high productive inefficiency –reduced genetic selection, slow growth to marketable size, high feed conversion rate– and fill a narrow niche market as practically all bream and bass is sold fresh and whole, unprocessed and untransformed, with an average size of 500 grams. To meet the high consumption and growing demand of aquaculture products, in the European Union (especially those prepared and transformed), Mediterranean aquaculture needs to urgently increase the production of the species already under cultivation (Bass and Bream) by means of improving its productive efficiency and at the same time begin initiating industrial production of new species by diversifying the cultivation. To carry out this diversification it is necessary to establish a clear methodology that ensures the selection of adapted and profitable species for the Mediterranean aquaculture industry. The sustainable farming of these new species needs to meet the challenges this sector faces: New species that complement and meet the current and future needs of the European and International markets for aquaculture products. New species with efficient production parameters that ensure competitive production costs. New species that can be cultivated using already existing production technologies. The aim of this PhD is to define and develop a simple methodology for the selection of new marine fish species for their efficient and sustainable cultivation. And by applying this methodology, to select a group of fish species for its profitable crop in the short and medium term (6-8 years) in the Mediterranean. For this, a methodology has been defined and applied evaluating ten candidate species selected from a series of lists originated from different studies and from diversification works previously conducted by other research teams. These candidate species are: Seriola dumerili. (Greater amberjack), Argyrosomus regius (Meagre), Polyprion americanus (Wreckfish), Ephinephelus marginatus (Dusky grouper), Dentex dentex (Common dentex), Pagrus pagrus (Red porgy), Solea senegalensis (Senegal sole), Thunnus thynnus (Bluefin tuna), Mugil cephalus (Grey mullet), Coryphaena hippurus (Dolphinfish). All these species occupy a broad and varied spectrum within different productive, technological and environmental market areas. There is minimal experience in their different stages of cultivation for all of them. While developing the selection methodology several evaluation parameters have been defined in this PhD, considered the most significant and simple to apply. The parameters are grouped in three blocks: commercial, productivity and environmental. Market block comprises criteria related to the marketing of the species. Quality of the fish meatCompetition with other species in the marketTransformation potentialFish selling price Environment block includes criteria related to the degree of suitability of the species in the region and the degree of environmental impact of their cultivation. Optimal water temperature range for cultivationPotential environmental impact of their cultivationTrophic chain level. Productivity block includes criteria and parameters related to the level of knowledge and control over their cultivation (larval, ongrowing, technology) Degree of control of the larval stageAvailability of alevin in the sector GrowthFeed conversion rate. Exploitation of installed capacityInvestment cost Prior to the evaluation, the main characteristics of the candidate species have been described based on the current status and experience of their cultivations. When applying these criteria evaluation matrices have been established assigning to each criteria a different value depending on their characteristics and selective properties. The results obtained by applying the proposed assessment methodology have identified the Greater Amberjack and Meagre as the most recommended species for farming in the Mediterranean in the short and medium term. The other two selected species were the Grey Mullet and the Dolphinfish. In conclusion, the cultivation of new species is crucial for the sustainable development of Mediterranean aquaculture. This diversification has to be based on the application of a simple and practical methodology that guarantees a selection of species whose cultivation is profitable and covers new market segments.

Del plan a la realidad: gobernanza y toma de decisiones en los procesos de regeneración urbana. El caso de Boston = From plan to reality: governance and decision-making in urban regeneration processes in Boston

En las últimas tres décadas, las dinámicas de restructuración económica a nivel global han redefinido radicalmente el papel de las ciudades. La transición del keynesianismo al neoliberalismo ha provocado un cambio en las políticas urbanas de los gobiernos municipales, que han abandonado progresivamente las tareas de regulación y redistribución para centrarse en la promoción del crecimiento económico y la competitividad. En este contexto, muchas voces críticas han señalado que la regeneración urbana se ha convertido en un vehículo de extracción de valor de la ciudad y está provocando la expulsión de los ciudadanos más vulnerables. Sin embargo, la regeneración de áreas consolidadas supone también una oportunidad de mejora de las condiciones de vida de la población residente, y es una política necesaria para controlar la expansión de la ciudad y reducir las necesidades de desplazamiento, promoviendo así ciudades más sostenibles. Partiendo de la hipótesis de que la gobernanza de los procesos de regeneración urbana es clave en el resultado final de las operaciones y determina el modelo de ciudad resultante, el objetivo de esta investigación es verificar si la regeneración urbana es necesariamente un mecanismo de extracción de valor o si puede mejorar la calidad de vida en las ciudades a través de la participación de los ciudadanos. Para ello, propone un marco de análisis del proceso de toma de decisiones en los planes de regeneración urbana y su impacto en los resultados de los planes, tomando como caso de estudio la ciudad de Boston, que desde los años 1990 trata de convertirse en una “ciudad de los barrios”, fomentando la participación ciudadana al tiempo que se posiciona en la escena económica global. El análisis se centra en dos operaciones de regeneración iniciadas a finales de los años 1990. Por un lado, el caso de Jackson Square nos permite comprender el papel de la sociedad civil y el tercer sector en la regeneración de los barrios más desfavorecidos, en un claro ejemplo de urbanismo “desde abajo” (bottom-up planning). Por otro, la reconversión del frente marítimo de South Boston para la construcción del Distrito de Innovación nos acerca a las grandes operaciones de regeneración urbana con fines de estímulo económico, tradicionalmente vinculadas a los centros financieros (downtown) y dirigidas por las élites gubernamentales y económicas (la growth machine) a través de procesos más tecnocráticos (top-down planning). La metodología utilizada consiste en el análisis cualitativo de los procesos de toma de decisiones y la relación entre los agentes implicados, así como de la evaluación de la implementación de dichas decisiones y su influencia en el modelo urbano resultante. El análisis de los casos permite afirmar que la gobernanza de los procesos de regeneración urbana influye decisivamente en el resultado final de las intervenciones; sin embargo, la participación de la comunidad local en la toma de decisiones no es suficiente para que el resultado de la regeneración urbana contrarreste los efectos de la neoliberalización, especialmente si se limita a la fase de planeamiento y no se extiende a la fase de ejecución, y si no está apoyada por una movilización política de mayor alcance que asegure una acción pública redistributiva. Asimismo, puede afirmarse que los procesos de regeneración urbana suponen una redefinición del modelo de ciudad, dado que la elección de los espacios de intervención tiene consecuencias sobre el equilibrio territorial de la ciudad. Los resultados de esta investigación tienen implicaciones para la disciplina del planeamiento urbano. Por una parte, se confirma la vigencia del paradigma del “urbanismo negociado”, si bien bajo discursos de liderazgo público y sin apelación al protagonismo del sector privado. Por otra parte, la planificación colaborativa en un contexto de “responsabilización” de las organizaciones comunitarias puede desactivar la potencia política de la participación ciudadana y servir como “amortiguador” hacia el gobierno local. Asimismo, la sustitución del planeamiento general como instrumento de definición de la ciudad futura por una planificación oportunista basada en la actuación en áreas estratégicas que tiren del resto de la ciudad, no permite definir un modelo coherente y consensuado de la ciudad que se desea colectivamente, ni permite utilizar el planeamiento como mecanismo de redistribución. ABSTRACT In the past three decades, the dynamics of global economic restructuring have radically redefined the role of cities. The transition from keynesianism to neoliberalism has caused a shift in local governments’ urban policies, which have progressively abandoned the tasks of regulation and redistribution to focus on promoting economic growth and competitiveness. In this context, many critics have pointed out that urban regeneration has become a vehicle for extracting value from the city and is causing the expulsion of the most vulnerable citizens. However, regeneration of consolidated areas is also an opportunity to improve the living conditions of the resident population, and is a necessary policy to control the expansion of the city and reduce the need for transportation, thus promoting more sustainable cities. Assuming that the governance of urban regeneration processes is key to the final outcome of the plans and determines the resulting city model, the goal of this research is to verify whether urban regeneration is necessarily a value extraction mechanism or if it can improve the quality of life in cities through citizens’ participation. It proposes a framework for analysis of decision-making in urban regeneration processes and their impact on the results of the plans, taking as a case study the city of Boston, which since the 1990s is trying to become a "city of neighborhoods", encouraging citizen participation, while seeking to position itself in the global economic scene. The analysis focuses on two redevelopment plans initiated in the late 1990s. The Jackson Square case allows us to understand the role of civil society and the third sector in the regeneration of disadvantaged neighborhoods, in a clear example of bottom-up planning. On the contrary, the conversion of the South Boston waterfront to build the Innovation District takes us to the big redevelopment efforts with economic stimulus’ goals, traditionally linked to downtowns and led by government and economic elites (the local “growth machine”) through more technocratic processes (top-down planning). The research is based on a qualitative analysis of the processes of decision making and the relationship between those involved, as well as the evaluation of the implementation of those decisions and their influence on the resulting urban model. The analysis suggests that the governance of urban regeneration processes decisively influences the outcome of interventions; however, community engagement in the decision-making process is not enough for the result of the urban regeneration to counteract the effects of neoliberalization, especially if it is limited to the planning phase and does not extend to the implementation of the projects, and if it is not supported by a broader political mobilization to ensure a redistributive public action. Moreover, urban regeneration processes redefine the urban model, since the choice of intervention areas has important consequences for the territorial balance of the city. The results of this study have implications for the discipline of urban planning. On the one hand, it confirms the validity of the "negotiated planning" paradigm, albeit under public leadership discourse and without a direct appeal to the leadership role of the private sector. On the other hand, collaborative planning in a context of "responsibilization" of community based organizations can deactivate the political power of citizen participation and serve as a "buffer" towards the local government. Furthermore, the replacement of comprehensive planning, as a tool for defining the city's future, by an opportunistic planning based on intervention in strategic areas that are supposed to induce change in the rest of the city, does not allow a coherent and consensual urban model that is collectively desired, nor it allows to use planning as a redistribution mechanism.

Solution structure of a 142-residue recombinant prion protein corresponding to the infectious fragment of the scrapie isoform

The scrapie prion protein (PrPSc) is the major, and possibly the only, component of the infectious prion; it is generated from the cellular isoform (PrPC) by a conformational change. N-terminal truncation of PrPSc by limited proteolysis produces a protein of ≈142 residues designated PrP 27–30, which retains infectivity. A recombinant protein (rPrP) corresponding to Syrian hamster PrP 27–30 was expressed in Escherichia coli and purified. After refolding rPrP into an α-helical form resembling PrPC, the structure was solved by multidimensional heteronuclear NMR, revealing many structural features of rPrP that were not found in two shorter PrP fragments studied previously. Extensive side-chain interactions for residues 113–125 characterize a hydrophobic cluster, which packs against an irregular β-sheet, whereas residues 90–112 exhibit little defined structure. Although identifiable secondary structure is largely lacking in the N terminus of rPrP, paradoxically this N terminus increases the amount of secondary structure in the remainder of rPrP. The surface of a long helix (residues 200–227) and a structured loop (residues 165–171) form a discontinuous epitope for binding of a protein that facilitates PrPSc formation. Polymorphic residues within this epitope seem to modulate susceptibility of sheep and humans to prion disease. Conformational heterogeneity of rPrP at the N terminus may be key to the transformation of PrPC into PrPSc, whereas the discontinuous epitope near the C terminus controls this transition.

Semaphorin 3A growth cone collapse requires a sequence homologous to tarantula hanatoxin

Axonal guidance is key to the formation of neuronal circuitry. Semaphorin 3A (Sema 3A; previously known as semaphorin III, semaphorin D, and collapsin-1), a secreted subtype of the semaphorin family, is an important axonal guidance molecule in vitro and in vivo. The molecular mechanisms of the repellent activity of semaphorins are, however, poorly understood. We have now found that the secreted semaphorins contain a short sequence of high homology to hanatoxin, a tarantula K+ and Ca2+ ion channel blocker. Point mutations in the hanatoxin-like sequence of Sema 3A reduce its capacity to repel embryonic dorsal root ganglion axons. Sema 3A growth cone collapse activity is inhibited by hanatoxin, general Ca2+ channel blockers, a reduction in extracellular or intracellular Ca2+, and a calmodulin inhibitor, but not by K+ channel blockers. Our data support an important role for Ca2+ in mediating the Sema 3A response and suggest that Sema 3A may produce its effects by causing the opening of Ca2+ channels.

Is sexual selection and species recognition a continuum? Mating behavior of the stalk-eyed fly Drosophila heteroneura

If behavioral isolation between species can evolve as a consequence of sexual selection within a species, then traits that are both sexually selected and used as a criterion of species recognition by females should be identifiable. The broad male head of the Hawaiian picture-winged fly Drosophila heteroneura is a novel sexual dimorphism that may be sexually selected and involved in behavioral isolation from D. silvestris. We found that males with broad heads are more successful in sexual selection, both through female mate choice and through aggressive interactions. However, female D. heteroneura do not discriminate against hybrids on the basis of their head width. Thus, this novel trait is sexually selected but is not a major contributor to species recognition. Our methods should be applicable to other species in which behavioral isolation is a factor.