A virtual backbone based approach for cooperative caching in mobile ad hoc networks

Cache look up is an integral part of cooperative caching in ad hoc networks. In this paper, we discuss a cooperative caching architecture with a distributed cache look up protocol which relies on a virtual backbone for locating and accessing data within a cooperate cache. Our proposal consists of two phases: (i) formation of a virtual backbone and (ii) the cache look up phase. The nodes in a Connected Dominating Set (CDS) form the virtual backbone. The cache look up protocol makes use of the nodes in the virtual backbone for effective data dissemination and discovery. The idea in this scheme is to reduce the number of nodes involved in cache look up process, by constructing a CDS that contains a small number of nodes, still having full coverage of the network. We evaluated the effect of various parameter settings on the performance metrics such as message overhead, cache hit ratio and average query delay. Compared to the previous schemes the proposed scheme not only reduces message overhead, but also improves the cache hit ratio and reduces the average delay

A location aided cooperative caching protocol for mobile ad hoc networks

Cooperative caching is an attractive solution for reducing bandwidth demands and network latency in mobile ad hoc networks. Deploying caches in mobile nodes can reduce the overall traffic considerably. Cache hits eliminate the need to contact the data source frequently, which avoids additional network overhead. In this paper we propose a data discovery and cache management policy for cooperative caching, which reduces the caching overhead and delay by reducing the number of control messages flooded in to the network. A cache discovery process based on location of neighboring nodes is developed for this. The cache replacement policy we propose aims at increasing the cache hit ratio. The simulation results gives a promising result based on the metrics of studies

PEER TO PEER CACHE RESOLUTION MECHANISM FOR MOBILE AD HOC NETWORKS

In this paper we investigate the problem of cache resolution in a mobile peer to peer ad hoc network. In our vision cache resolution should satisfy the following requirements: (i) it should result in low message overhead and (ii) the information should be retrieved with minimum delay. In this paper, we show that these goals can be achieved by splitting the one hop neighbours in to two sets based on the transmission range. The proposed approach reduces the number of messages flooded in to the network to find the requested data. This scheme is fully distributed and comes at very low cost in terms of cache overhead. The experimental results gives a promising result based on the metrics of studies.

Energy Efficient Cache Discovery in Wireless Mobile Ad oc Networks

Data caching is an attractive solution for reducing bandwidth demands and network latency in mobile ad hoc networks. Deploying caches in mobile nodes can reduce the overall traf c considerably. Cache hits eliminate the need to contact the data source frequently, which avoids additional network overhead. In this paper we propose a data discovery and cache management policy for cooperative caching, which reduces the power usage, caching overhead and delay by reducing the number of control messages flooded into the network .A cache discovery process based on position cordinates of neighboring nodes is developed for this .The stimulstion results gives a promising result based on the metrics of the studies.

A Framework of Statistical Machine Translator from English to Malayalam

In this paper we describe the methodology and the structural design of a system that translates English into Malayalam using statistical models. A monolingual Malayalam corpus and a bilingual English/Malayalam corpus are the main resource in building this Statistical Machine Translator. Training strategy adopted has been enhanced by PoS tagging which helps to get rid of the insignificant alignments. Moreover, incorporating units like suffix separator and the stop word eliminator has proven to be effective in bringing about better training results. In the decoder, order conversion rules are applied to reduce the structural difference between the language pair. The quality of statistical outcome of the decoder is further improved by applying mending rules. Experiments conducted on a sample corpus have generated reasonably good Malayalam translations and the results are verified with F measure, BLEU and WER evaluation metrics

English to Malayalam Translation: A Statistical Approach

This paper underlines a methodology for translating text from English into the Dravidian language, Malayalam using statistical models. By using a monolingual Malayalam corpus and a bilingual English/Malayalam corpus in the training phase, the machine automatically generates Malayalam translations of English sentences. This paper also discusses a technique to improve the alignment model by incorporating the parts of speech information into the bilingual corpus. Removing the insignificant alignments from the sentence pairs by this approach has ensured better training results. Pre-processing techniques like suffix separation from the Malayalam corpus and stop word elimination from the bilingual corpus also proved to be effective in training. Various handcrafted rules designed for the suffix separation process which can be used as a guideline in implementing suffix separation in Malayalam language are also presented in this paper. The structural difference between the English Malayalam pair is resolved in the decoder by applying the order conversion rules. Experiments conducted on a sample corpus have generated reasonably good Malayalam translations and the results are verified with F measure, BLEU and WER evaluation metrics

A framework for translating English text into Malayalam using statistical models

A methodology for translating text from English into the Dravidian language, Malayalam using statistical models is discussed in this paper. The translator utilizes a monolingual Malayalam corpus and a bilingual English/Malayalam corpus in the training phase and generates automatically the Malayalam translation of an unseen English sentence. Various techniques to improve the alignment model by incorporating the morphological inputs into the bilingual corpus are discussed. Removing the insignificant alignments from the sentence pairs by this approach has ensured better training results. Pre-processing techniques like suffix separation from the Malayalam corpus and stop word elimination from the bilingual corpus also proved to be effective in producing better alignments. Difficulties in translation process that arise due to the structural difference between the English Malayalam pair is resolved in the decoding phase by applying the order conversion rules. The handcrafted rules designed for the suffix separation process which can be used as a guideline in implementing suffix separation in Malayalam language are also presented in this paper. Experiments conducted on a sample corpus have generated reasonably good Malayalam translations and the results are verified with F measure, BLEU and WER evaluation metrics

Extension schemes for the Alignment Model of English-Malayalam Statistical Machine Translator

In Statistical Machine Translation from English to Malayalam, an unseen English sentence is translated into its equivalent Malayalam sentence using statistical models. A parallel corpus of English-Malayalam is used in the training phase. Word to word alignments has to be set among the sentence pairs of the source and target language before subjecting them for training. This paper deals with certain techniques which can be adopted for improving the alignment model of SMT. Methods to incorporate the parts of speech information into the bilingual corpus has resulted in eliminating many of the insignificant alignments. Also identifying the name entities and cognates present in the sentence pairs has proved to be advantageous while setting up the alignments. Presence of Malayalam words with predictable translations has also contributed in reducing the insignificant alignments. Moreover, reduction of the unwanted alignments has brought in better training results. Experiments conducted on a sample corpus have generated reasonably good Malayalam translations and the results are verified with F measure, BLEU and WER evaluation metrics.

Impact of Node Mobility on Routing Protocols for Wireless Sensor Networks

Wireless sensor networks monitor their surrounding environment for the occurrence of some anticipated phenomenon. Most of the research related to sensor networks considers the static deployment of sensor nodes. Mobility of sensor node can be considered as an extra dimension of complexity, which poses interesting and challenging problems. Node mobility is a very important aspect in the design of effective routing algorithm for mobile wireless networks. In this work we intent to present the impact of different mobility models on the performance of the wireless sensor networks. Routing characteristics of various routing protocols for ad-hoc network were studied considering different mobility models. Performance metrics such as end-to-end delay, throughput and routing load were considered and their variations in the case of mobility models like Freeway, RPGM were studied. This work will be useful to figure out the characteristics of routing protocols depending on the mobility patterns of sensors

Techniques to Improve the word alignments in Statistical Machine Translation from English to Malayalam

In Statistical Machine Translation from English to Malayalam, an unseen English sentence is translated into its equivalent Malayalam translation using statistical models like translation model, language model and a decoder. A parallel corpus of English-Malayalam is used in the training phase. Word to word alignments has to be set up among the sentence pairs of the source and target language before subjecting them for training. This paper is deals with the techniques which can be adopted for improving the alignment model of SMT. Incorporating the parts of speech information into the bilingual corpus has eliminated many of the insignificant alignments. Also identifying the name entities and cognates present in the sentence pairs has proved to be advantageous while setting up the alignments. Moreover, reduction of the unwanted alignments has brought in better training results. Experiments conducted on a sample corpus have generated reasonably good Malayalam translations and the results are verified with F measure, BLEU and WER evaluation metrics

Automatic Image Annotation Using SURF Descriptors

In recent years there is an apparent shift in research from content based image retrieval (CBIR) to automatic image annotation in order to bridge the gap between low level features and high level semantics of images. Automatic Image Annotation (AIA) techniques facilitate extraction of high level semantic concepts from images by machine learning techniques. Many AIA techniques use feature analysis as the first step to identify the objects in the image. However, the high dimensional image features make the performance of the system worse. This paper describes and evaluates an automatic image annotation framework which uses SURF descriptors to select right number of features and right features for annotation. The proposed framework uses a hybrid approach in which k-means clustering is used in the training phase and fuzzy K-NN classification in the annotation phase. The performance of the system is evaluated using standard metrics.

Measuring Value in Product Development

“What is value in product development?” is the key question of this paper. The answer is critical to the creation of lean in product development. By knowing how much value is added by product development (PD) activities, decisions can be more rationally made about how to allocate resources, such as time and money. In order to apply the principles of Lean Thinking and remove waste from the product development system, value must be precisely defined. Unfortunately, value is a complex entity that is composed of many dimensions and has thus far eluded definition on a local level. For this reason, research has been initiated on “Measuring Value in Product Development.” This paper serves as an introduction to this research. It presents the current understanding of value in PD, the critical questions involved, and a specific research design to guide the development of a methodology for measuring value. Work in PD value currently focuses on either high-level perspectives on value, or detailed looks at the attributes that value might have locally in the PD process. Models that attempt to capture value in PD are reviewed. These methods, however, do not capture the depth necessary to allow for application. A methodology is needed to evaluate activities on a local level to determine the amount of value they add and their sensitivity with respect to performance, cost, time, and risk. Two conceptual tools are proposed. The first is a conceptual framework for value creation in PD, referred to here as the Value Creation Model. The second tool is the Value-Activity Map, which shows the relationships between specific activities and value attributes. These maps will allow a better understanding of the development of value in PD, will facilitate comparison of value development between separate projects, and will provide the information necessary to adapt process analysis tools (such as DSM) to consider value. The key questions that this research entails are: · What are the primary attributes of lifecycle value within PD? · How can one model the creation of value in a specific PD process? · Can a useful methodology be developed to quantify value in PD processes? · What are the tools necessary for application? · What PD metrics will be integrated with the necessary tools? The research milestones are: · Collection of value attributes and activities (September, 200) · Development of methodology of value-activity association (October, 2000) · Testing and refinement of the methodology (January, 2001) · Tool Development (March, 2001) · Present findings at July INCOSE conference (April, 2001) · Deliver thesis that captures a formalized methodology for defining value in PD (including LEM data sheets) (June, 2001) The research design aims for the development of two primary deliverables: a methodology to guide the incorporation of value, and a product development tool that will allow direct application.

Clustering compositional data trajectories

Our essay aims at studying suitable statistical methods for the clustering of compositional data in situations where observations are constituted by trajectories of compositional data, that is, by sequences of composition measurements along a domain. Observed trajectories are known as “functional data” and several methods have been proposed for their analysis. In particular, methods for clustering functional data, known as Functional Cluster Analysis (FCA), have been applied by practitioners and scientists in many fields. To our knowledge, FCA techniques have not been extended to cope with the problem of clustering compositional data trajectories. In order to extend FCA techniques to the analysis of compositional data, FCA clustering techniques have to be adapted by using a suitable compositional algebra. The present work centres on the following question: given a sample of compositional data trajectories, how can we formulate a segmentation procedure giving homogeneous classes? To address this problem we follow the steps described below. First of all we adapt the well-known spline smoothing techniques in order to cope with the smoothing of compositional data trajectories. In fact, an observed curve can be thought of as the sum of a smooth part plus some noise due to measurement errors. Spline smoothing techniques are used to isolate the smooth part of the trajectory: clustering algorithms are then applied to these smooth curves. The second step consists in building suitable metrics for measuring the dissimilarity between trajectories: we propose a metric that accounts for difference in both shape and level, and a metric accounting for differences in shape only. A simulation study is performed in order to evaluate the proposed methodologies, using both hierarchical and partitional clustering algorithm. The quality of the obtained results is assessed by means of several indices

Revisiting the compositional data. Some fundamental questions and new prospects in Archaeometry and Archaeology

In this paper we examine the problem of compositional data from a different starting point. Chemical compositional data, as used in provenance studies on archaeological materials, will be approached from the measurement theory. The results will show, in a very intuitive way that chemical data can only be treated by using the approach developed for compositional data. It will be shown that compositional data analysis is a particular case in projective geometry, when the projective coordinates are in the positive orthant, and they have the properties of logarithmic interval metrics. Moreover, it will be shown that this approach can be extended to a very large number of applications, including shape analysis. This will be exemplified with a case study in architecture of Early Christian churches dated back to the 5th-7th centuries AD

Sistema distribuido colaborativo para la recuperación de documentación educativa.

Sobre la base del estudio de esquemas de comunicación asincrónicos, el presente artículo propone un framework basado en servicios web para la recuperación de documentación educativa en forma colaborativa en ambientes distribuidos, y más concretamente 1) propone describir explícitamente la intención de los mensajes entre procesos utilizando para ello performatives del estándar FIPA, y sobre la base de dicha descripción 2) presenta un conjunto de métricas que evalúan la gestión de la información y 3) define dos algoritmos que mejoran la calidad del servicio del intercambio de información en función de la mejora del proceso de recuperación de documentación educativa.