Modeling information in software languages

Ohjelmiston kehitystyökalut käyttävät infromaatiota kehittäjän tuottamasta lähdekoodista. Informaatiota hyödynnetään ohjelmistoprojektin eri vaiheissa ja eri tarkoituksissa. Moderneissa ohjelmistoprojekteissa käytetyn informaation määrä voi kasvaa erittäin suureksi. Ohjelmistotyökaluilla on omat informaatiomallinsa ja käyttömekanisminsa. Informaation määrä sekä erilliset työkaluinformaatiomallit tekevät erittäin hankalaksi rakentaa joustavaa työkaluympäristöä, erityisesti ongelma-aluekohtaiseen ohjelmiston kehitysprosessiin. Tässä työssä on analysoitu perusinformaatiometamalleja Unified Modeling language kielestä, Python ohjelmointikielestä ja C++ ohjelmointikielestä. Metainformaation taso on rajoitettu rakenteelliselle tasolle. Ajettavat rakenteet on jätetty pois. ModelBase metamalli on yhdistetty olemassa olevista analysoiduista metamalleista. Tätä metamallia voidaan käyttää tulevaisuudessa ohjelmistotyökalujen kehitykseen.

CRM tietojohtamisen näkökulmasta

Tämän tutkielman tarkoituksena on selvittää, miten tietojohtamisen konseptia voidaansoveltaa asiakassuhteiden hallinnassa. Tutkimusmenetelmänä olen käyttänyt kirjallisuustutkimusta, jota on täydennetty yhdellä tapaustutkimuksella. Tietojohtaminen voidaan jakaa kahteen osakokonaisuuteen: tietämyksen hallintaan ja tietohallintoon. Tietämyksen hallinta käsittää ihmiset ja organisaation, kun taas tietohallinto käsittää tietojärjestelmät ja sovellukset. Tätä jaottelua voidaan soveltaa myös asiakassuhteiden (asiakkuuksien) hallintaan. Asiakkuuden hallinta voidaansamaan tapaan jakaa asiakastietämyksen hallintaan ja sitä tukevaan tietohallintoon. Näin ollen tietojohtamisen kehittämiseen rakennetut mallit ja menetelmät ovat sovellettavissa myös asiakkuuden hallinnan kehittämiseen. Tietojohtamisen konseptin ja tapaustutkimuksen pohjalta johtamani asiakkuuden hallinnan konsepti poikkeaa jonkin verran yleisesti käytetyistä asiakkuuden hallinnan teoreettisista malleista. Konseptini arkkitehtuuri perustuu visioon, muutosta kuvaaviin strategioihin sekä yhteisesti sovittuihin mittareihin, joilla asiakkuuden hallinnan eriosa-alueiden tarkoituksenmukaisuutta ja tehokkuutta arvioidaan. Keskeisenä tavoitteena on varmistaa asiakastietämyksen kartuttaminen ja tehokas hyödyntäminen kaikissa asiakasrajapinnoissa. Tähän päästään yhdistämällä asiakasprosessit ja organisaation omat toimintaprosessit mahdollisimman saumattomaksi kokonaisuudeksi mm. tietohallinnon palveluja ja monikanavaisuuden ideaa hyödyntämällä. Asiakkuuden hallinnan kehittämisen kannalta on tärkeää ymmärtää, millaisia mahdollisuuksia tietojohtamisen eri mallit ja yleisemmin koko tietoyhteiskuntakehitys antavat organisaatioiden kilpailukyvyn tehostamiseen. Keskeistä on luoda edellytykset tiedon vapaalle virralle, verkostoitumiselle ja innovaatioille unohtamatta kuitenkaan analyysin ja systemaattisten toimintatapojen merkitystä yrityksen toiminnan kokonaisuudessa

"Soap-Bubble" visualization and quantitative analysis of 3D coronary magnetic resonance angiograms.

In order to compare coronary magnetic resonance angiography (MRA) data obtained with different scanning methodologies, adequate visualization and presentation of the coronary MRA data need to be ensured. Furthermore, an objective quantitative comparison between images acquired with different scanning methods is desirable. To address this need, a software tool ("Soap-Bubble") that facilitates visualization and quantitative comparison of 3D volume targeted coronary MRA data was developed. In the present implementation, the user interactively specifies a curved subvolume (enclosed in the 3D coronary MRA data set) that closely encompasses the coronary arterial segments. With a 3D Delaunay triangulation and a parallel projection, this enables the simultaneous display of multiple coronary segments in one 2D representation. For objective quantitative analysis, frequently explored quantitative parameters such as signal-to-noise ratio (SNR); contrast-to-noise ratio (CNR); and vessel length, sharpness, and diameter can be assessed. The present tool supports visualization and objective, quantitative comparisons of coronary MRA data obtained with different scanning methods. The first results obtained in healthy adults and in patients with coronary artery disease are presented.

Value added logistics in supply and demand chain. Smile. Part 2. eBusiness in a service business. Case: A maintenance and operations network in forest industry

VVALOSADE is a research project of professor Anita Lukka's VALORE research team in the Lappeenranta University of Technology. The VALOSADE includes the ELO technology program of Tekes. SMILE is one of four subprojects of the VALOSADE. The SMILE study focuses on the case of the company network that is composed of small and micro-sized mechanical maintenance service providers and forest industry as large-scale customers. The basic principle of the SMILE study is the communication and ebusiness in supply and demand networks. The aim of the study is to develop ebusiness strategy, ebusiness model and e-processes among the SME local service providers, and onthe other hand, between the local service provider network and the forest industry customers in a maintenance and operations service business. A literature review, interviews and benchmarking are used as research methods in this qualitative case study. The first SMILE report, 'Ebusiness between Global Company and Its Local SME Supplier Network', concentrated on creating background for the SMILE study by studying general trends of ebusiness in supply chains and networks of different industries. This second phase of the study concentrates on case network background, such as business relationships, information systems and business objectives; core processes in maintenance and operations service network; development needs in communication among the network participants; and ICT solutions to respond needs in changing environment. In the theory part of the report, different ebusiness models and frameworks are introduced. Those models and frameworks are compared to empirical case data. From that analysis of the empirical data, therecommendations for the development of the network information system are derived. In process industry such as the forest industry, it is crucial to achieve a high level of operational efficiency and reliability, which sets up great requirements for maintenance and operations. Therefore, partnerships or strategic alliances are needed between the network participants. In partnerships and alliances, deep communication is important, and therefore the information systems in the network also are critical. Communication, coordination and collaboration will increase in the case network in the future, because network resources must be optimised to improve competitive capability of the forest industry customers and theefficiency of their service providers. At present, ebusiness systems are not usual in this maintenance network. A network information system among the forest industry customers and their local service providers actually is the only genuinenetwork information system in this total network. However, the utilisation of that system has been quite insignificant. The current system does not add value enough either to the customers or to the local service providers. At present, thenetwork information system is the infomediary that share static information forthe network partners. The network information system should be the transaction intermediary, which integrates internal processes of the network companies; the network information system, which provides common standardised processes for thelocal service providers; and the infomediary, which share static and dynamic information on right time, on right partner, on right costs, on right format and on right quality. This study provides recommendations how to develop this system in the future to add value to the network companies. Ebusiness scenarios, vision, objectives, strategies, application architecture, ebusiness model, core processes and development strategy must be considered when the network information system will be developed in the next development step. The core processes in the case network are demand/capacity management, customer/supplier relationship management, service delivery management, knowledge management and cash flow management. Most benefits from ebusiness solutions come from the electrifying of operational level processes, such as service delivery management and cash flow management.

On the innovation capacity of technologyrelated knowledge-intensive business services. A case study of the technology and engineering consulting (TEC) sector in Singapore

Even though the research on innovation in services has expanded remarkably especially during the past two decades, there is still a need to increase understanding on the special characteristics of service innovation. In addition to studying innovation in service companies and industries, research has also recently focused more on services in innovation, as especially the significance of so-called knowledge intensive business services (KIBS) for the competitive edge of their clients, othercompanies, regions and even nations has been proved in several previous studies. This study focuses on studying technology-based KIBS firms, and technology andengineering consulting (TEC) sector in particular. These firms have multiple roles in innovation systems, and thus, there is also a need for in-depth studies that increase knowledge about the types and dimensions of service innovations as well as underlying mechanisms and procedures which make the innovations successful. The main aim of this study is to generate new knowledge in the fragmented research field of service innovation management by recognizing the different typesof innovations in TEC services and some of the enablers of and barriers to innovation capacity in the field, especially from the knowledge management perspective. The study also aims to shed light on some of the existing routines and new constructions needed for enhancing service innovation and knowledge processing activities in KIBS companies of the TEC sector. The main samples of data in this research include literature reviews and public data sources, and a qualitative research approach with exploratory case studies conducted with the help of the interviews at technology consulting companies in Singapore in 2006. These complement the qualitative interview data gathered previously in Finland during a larger research project in the years 2004-2005. The data is also supplemented by a survey conducted in Singapore. The respondents for the survey by Tan (2007) were technology consulting companies who operate in the Singapore region. The purpose ofthe quantitative part of the study was to validate and further examine specificaspects such as the influence of knowledge management activities on innovativeness and different types of service innovations, in which the technology consultancies are involved. Singapore is known as a South-east Asian knowledge hub and is thus a significant research area where several multinational knowledge-intensive service firms operate. Typically, the service innovations identified in the studied TEC firms were formed by several dimensions of innovations. In addition to technological aspects, innovations were, for instance, related to new client interfaces and service delivery processes. The main enablers of and barriers to innovation seem to be partly similar in Singaporean firms as compared to the earlier study of Finnish TEC firms. Empirical studies also brought forth the significance of various sources of knowledge and knowledge processing activities as themain driving forces of service innovation in technology-related KIBS firms. A framework was also developed to study the effect of knowledge processing capabilities as well as some moderators on the innovativeness of TEC firms. Especially efficient knowledge acquisition and environmental dynamism seem to influence the innovativeness of TEC firms positively. The results of the study also contributeto the present service innovation literature by focusing more on 'innovation within KIBs' rather than 'innovation through KIBS', which has been the typical viewpoint stressed in the previous literature. Additionally, the study provides several possibilities for further research.

Maximizing Benefits in Information Technology Outsourcing

Information Technology (IT) outsourcing has traditionally been seen as a means to acquire newresources and competencies to perform standard tasks at lowered cost. This dissertationchallenges the thought that outsourcing should be limited to non-strategic systems andcomponents, and presents ways to maximize outsourcing enabled benefits while minimizingassociated risks. In this dissertation IT outsourcing is approached as an efficiency improvement and valuecreationprocess rather than a sourcing decision. The study focuses on when and how tooutsource information technology, and presents a new set of critical success factors foroutsourcing project management. In a case study it re-validates the theory-based propositionthat in certain cases and situations it is beneficial to partly outsource also strategic IT systems. The main contribution of this dissertation is the validation of proposal that in companies wherethe level of IT competency is high, managerial support established and planning processes welldefined,it is possible to safely outsource also business critical IT systems. A model describing the critical success factors in such cases is presented based on existing knowledge on the fieldand the results of empirical study. This model further highlights the essence of aligning IT andbusiness strategies, assuming long-term focus on partnering, and the overall target ofoutsourcing to add to the strengths of the company rather than eliminating weaknesses.

Muscle transcriptomic profiles in pigs with divergent phenotypes for fatness traits

BACKGROUND: Selection for increasing intramuscular fat content would definitively improve the palatability and juiciness of pig meat as well as the sensorial and organoleptic properties of cured products. However, evidences obtained in human and model organisms suggest that high levels of intramuscular fat might alter muscle lipid and carbohydrate metabolism. We have analysed this issue by determining the transcriptomic profiles of Duroc pigs with divergent phenotypes for 13 fatness traits. The strong aptitude of Duroc pigs to have high levels of intramuscular fat makes them a valuable model to analyse the mechanisms that regulate muscle lipid metabolism, an issue with evident implications in the elucidation of the genetic basis of human metabolic diseases such as obesity and insulin resistance. RESULTS: Muscle gene expression profiles of 68 Duroc pigs belonging to two groups (HIGH and LOW) with extreme phenotypes for lipid deposition and composition traits have been analysed. Microarray and quantitative PCR analysis showed that genes related to fatty acid uptake, lipogenesis and triacylglycerol synthesis were upregulated in the muscle tissue of HIGH pigs, which are fatter and have higher amounts of intramuscular fat than their LOW counterparts. Paradoxically, lipolytic genes also showed increased mRNA levels in the HIGH group suggesting the existence of a cycle where triacylglycerols are continuously synthesized and degraded. Several genes related to the insulin-signalling pathway, that is usually impaired in obese humans, were also upregulated. Finally, genes related to antigen-processing and presentation were downregulated in the HIGH group. CONCLUSION: Our data suggest that selection for increasing intramuscular fat content in pigs would lead to a shift but not a disruption of the metabolic homeostasis of muscle cells. Future studies on the post-translational changes affecting protein activity or expression as well as information about protein location within the cell would be needed to to elucidate the effects of lipid deposition on muscle metabolism in pigs.

Improving Information Problem Solving skills in Secondary Education through embedded instruction

This empirical study consists in an investigation of the effects, on the development of Information Problem Solving (IPS) skills, of a long-term embedded, structured and supported instruction in Secondary Education. Forty secondary students of 7th and 8th grades (13–15 years old) participated in the 2-year IPS instruction designed in this study. Twenty of them participated in the IPS instruction, and the remaining twenty were the control group. All the students were pre- and post-tested in their regular classrooms, and their IPS process and performance were logged by means of screen capture software, to warrant their ecological validity. The IPS constituent skills, the web search sub-skills and the answers given by each participant were analyzed. The main findings of our study suggested that experimental students showed a more expert pattern than the control students regarding the constituent skill ‘defining the problem’ and the following two web search sub-skills: ‘search terms’ typed in a search engine, and ‘selected results’ from a SERP. In addition, scores of task performance were statistically better in experimental students than in control group students. The paper contributes to the discussion of how well-designed and well-embedded scaffolds could be designed in instructional programs in order to guarantee the development and efficiency of the students’ IPS skills by using net information better and participating fully in the global knowledge society.

Impact of extracardiac findings during cardiac MR on patient management and outcome.

BACKGROUND: Cardiac magnetic resonance (CMR) is increasingly used to assess heart diseases. Relevant non-cardiac diseases may also be incidentally found on CMR images. The aim of this study was to determine the prevalence and nature of incidental extra-cardiac findings (IEF) and their clinical impact in non-selected patients referred for CMR. MATERIAL/METHODS: MR images of 762 consecutive patients (515 men, age: 56±18 years) referred for CMR were prospectively interpreted by 2 radiologists blinded for any previous imaging study. IEFs were classified as major when requiring treatment, follow-up, or further investigation. Clinical follow-up was performed by checking hospital information records and by calling referring physicians. The 2 endpoints were: 1) non-cardiac death and new treatment related to major IEFs, and 2) hospitalization related to major IEFs during follow-up. RESULTS: Major IEFs were proven in 129 patients (18.6% of the study population), 14% of those being unknown before CMR. During 15±6 month follow-up, treatment of confirmed major IEFs was initiated in 1.4%, and no non-cardiac deaths occurred. Hospitalization occurred in 8 patients (1.0% of the study population) with confirmed major IEFs and none occurred in the remaining 110 patients with unconfirmed/unexplored major IEFs (p<0.001). CONCLUSIONS: Screening for major IEFs in a population referred for routine CMR changed management in 1.4% of patients. Major IEFs unknown before CMR but without further exploration, however, carried a favorable prognosis over a follow-up period of 15 months.

The development of an information infrastructure for cost estimating in the automotive industry

Työn tavoitteena on luoda yleinen informaatioinfrastruktuuri autoteollisuuden valmistuskustannusten arviointiin. Nykyään tämä kustannusarviointi on laajassa käytössä oleva menetelmä. Se mahdollistaa tuotekustannusten hallitsemisen, mikä lisää autovalmistajien kilpailukykyä. Kustannusarvioinnissa tarvitaan laadukasta tietoa, mutta suoritetussa tutkimuksessa paljastui, että useat seikat haittaavat tätä arviointia. Erityisesti resurssien vähyys, tiedonhankinta ja tiedon luotettavuuden varmentaminen aiheuttavat ongelmia. Nämä seikat ovat johtaneet kokemusperäisen asiantuntemuksen laajaan käyttöön, minkä johdosta erityisesti kokemattomilla kustannusarvioijilla on vaikeuksia ymmärtää kustannusarvioiden tietovaatimuksia. Tämän johdosta tutkimus tuo esiin kokeneiden kustannusarvioijien käyttämiä tietoja ja tietolähteitä päämääränä lisätä kustannusarvioiden ymmärtämistä. Informaatioinfrastruktuuri, joka sisältää tarvittavan tiedon järkevien ja luotettavien kustannusarvioiden luontiin, perustuu tutkimuksen tuloksiin. Infrastruktuuri määrittelee tarvittavan kustannustiedon ja niiden mahdolliset tietolähteet. Lisäksi se selvittää miksi tieto on tarpeellista ja miten tiedon oikeellisuus pitäisi varmentaa. Infrastruktuuria käytetään yhdessä yleisen kustannusarvioprosessimallin kanssa. Tämä integrointi johtaa tarkempiin ja selkeämpiin kustannusarvioihin autoteollisuudessa.

Web Services osana sovellusintegraatiota toiminnanohjausjärjestelmässä

Työssä esitellään Web Services -konseptia ja sovellusintegraatiota, sekä toteutetaan toiminnanohjausjärjestelmästä yrityksen asiakkaalle tietoja välittävään palveluun tuki Web Services -arkkitehtuurille. Palvelun tehtävänä on huolehtia yrityksen ja sen liiketoimintakumppaneiden välisestä XML-pohjaisesta viestiliikenteestä. Työn teoriaosassa perehdytään sovellusintegraatioon ja sen osa-alueisiin, Web Services -konseptiin ja -standardeihin sekä sen kanssa kilpaileviin tekniikoihin. Käytännön osuudessa toteutetaan paperiteollisuusyrityksen tilaus- ja toimitustietoja XML:n avulla lähettävään Java-pohjaiseen järjestelmään tuki SOAP-viesteille, sekä WSDL-kuvaukset palveluille. Työssä tutkitaan Web Services -arkkitehtuurin soveltuvuutta ja implementoinnin helppoutta toimintaohjausjärjestelmään. Tuloksena todetaan Web Services -arkkitehtuurin olevan mielenkiintoinen ja monella tapaa integrointia helpottava tekniikka. Arkkitehtuurin standardien puutteiden ja varhaisten versioiden takia tekniikan todetaan kuitenkin olevan monelta osin riittämätön ja epäkypsä toteuttamaan yritysten kriittisten järjestelmien integrointia.

Controlling Access to Personal Information

Tässä diplomityössä käsitellään henkilökohtaisen tiedon saannin kontrollointia ja tiedon kuvaamista. Työn käytännön osuudessa suunniteltiin XML –malli henkilökohtaisen tiedon kuvaamiseen. Henkilökohtaisten tietojen käyttäminen mahdollistaa henkilökohtaisen palvelun tarjoamisen ja myös palvelun automatisoinnin käyttäjälle. Henkilökohtaisen tiedon kuvaaminen on hyvin oleellista, jotta palvelut voivat kysellä ja ymmärtää tietoja. Henkilökohtaiseen tietoon vaikuttaa erilaisia tekijöitä, jotka on myös otettava huomioon tietoa kuvattaessa. Henkilökohtaisen tiedon leviäminen eri palveluiden tarjoajille tuo mukanaan myös riskejä. Henkilökohtaisen tiedon joutuminen väärän henkilön käsiin saattaa aiheuttaa vakaviakin ongelmia tiedon omistajalle. Henkilökohtaisen tiedon turvallisen ja luotettavan käytettävyyden kannalta onkin hyvin oleellista, että käyttäjällä on mahdollisuus kontrolloida kenelle hän haluaa luovuttaa mitäkin tietoa.

Multimedia Messaging Service Center in a Component Based Architecture

Multimedia-sanomanvälityspalvelu (MMS) on matkapuhelinten väliseen viestintään kehitetty palvelu, joka mahdollistaa yhteyden Internet maailmaan. Multimedia-sanomanvälityspalvelua voidaan käyttää luomaan yhteys matkapuhelimen käyttäjän ja ulkoisen sovelluspalvelimen välille. MMS voidaan nähdä sovelluksena, joka yhdistää multimediaviestin luonnin, käsittelyn sekä toimituksen monelle eri sisältö tyypille. Multimedia-viestikeskus (MMSC) on uusi verkkoelementti, joka on vastuussa multimediaviestien varastoinnista ja toimituksesta. Multimedia-viestikeskuksella on kolme loogista elementtiä, jotka ovat välityspalvelin, sovellusrajapinnat ja matkapuhelinverkkorajapinta. Operaattorit sekä kolmannen osapuolen sovelluskehittäjät voivat kehittää lisäarvopalveluita multimedia-sanomanvälityspalvelulle hyödyntämällä sovellusrajapintoja. Sovellusrajapinnat perustuvat olemassa oleviin Internet protokolliin. Tämä diplomityö tutkii Multimedia-sanomanvälityspalvelun verkkoelementtien rajapintoja. Tulevaisuudessa on tarkoitus lisätä Multimedia-sanomanvälityspalvelun verkkoelementtejä sähköisen kaupankäynnin kehysarkkitehtuuriin, joka perustuu komponentteihin.