Exchange, know-hows, and interpersonal segmentation : an assessment of the archaic component of the Gaudreau (BkEu-8) site, Weedon, Quebec

Le site Gaudreau est un site perturbé et à occupations multiples situé dans le sud-est du Québec, et présente des occupations datant du Paléoindien Récent jusqu’à la période historique. Les occupations Archaïques du site, noté par la présence de bifaces diagnostiques de l’Archaïque Supérieur et de l’Archaïque Terminal et par des Macrooutils de l’Archaïque Moyen et de l’Archaïque Supérieur, sont le sujet principal de ce mémoire. Puisqu’aucune occupation ne peut être différencié horizontalement ni verticalement, et qu’aucun objet non-diagnostique ne peut être associé avec certitude, seul un échantillon de 32 objets ont été observés. Étant donné la faible taille de l’échantillon analysé, il est fort probable qu’un plus grand nombre de sources de matières premières aient été utilisés durant les occupations de l’Archaïque. Toutefois, un réseau de matières premières lithiques similaire à ceux des sites du Lac Mégantic a été observé, avec une forte représentation de la rhyolite Kineo-Traveller et des cherts Appalachiens. Des cherts des Grands Lacs et le quartzite de Cheshire sont aussi présents. Le mudstone silicifié d’origine locale et le quartz sont par contre faiblement représentés dans l’échantillon, probablement dû à un biais de proximité de source. L’analyse technique de l’échantillon, sans contrôle pour les pratiques techno-économiques, dénote plusieurs récurrences techniques à l’intérieur des unités typologiques, sans toutefois appuyer des différences récurrentes significatives entre les matières premières de régions différentes. À cause de la taille de l’échantillon et du contexte perturbé, la pertinence des fortes similarités entre certains objets est douteuse. La segmentation interpersonnelle des chaînes opératoires ne pouvait être déterminée dans l’échantillon. Cependant, les résultats incitent plutôt à croire que les matières premières devaient circuler sous diverses formes. Il peut être considéré que, en dehors des matières premières locales, les occupants Archaïques du site Gaudreau n’avaient pas d’accès direct aux matières premières exogènes.

A comparative study of alginate beads and an ion-exchange resin for the removal of heavy metals from a metal plating effluent

The capacity of dry protonated calcium alginate beads to sorb metals from an industrial effluent was studied and compared with a commercial ion-exchange resin (Lewatit TP 207). Both sorbents decreased zinc, nickel, iron and calcium concentrations in the effluent, and released sodium during treatment. Alginate beads removed lower amounts of heavy metals than the resin, but exhibited faster uptake kinetics. Zinc desorption from the sorbents was achieved in 30 minutes using 0.1 M HCl or 0.1 M H(2)SO(4). Desorption ratios with these acids varied between 90 and 100% for alginate, and 98 to 100% for the ion-exchange resin. Reusability tests with HCl showed that alginate beads can stand acid desorption and recover binding capacity. Overall, the comparison of dry protonated alginate beads with the resin supports the potential of the biosorbent for the treatment of industrial effluents.

A next application prediction service using the BaranC framework

Predicting user behaviour enables user assistant services provide personalized services to the users. This requires a comprehensive user model that can be created by monitoring user interactions and activities. BaranC is a framework that performs user interface (UI) monitoring (and collects all associated context data), builds a user model, and supports services that make use of the user model. A prediction service, Next-App, is built to demonstrate the use of the framework and to evaluate the usefulness of such a prediction service. Next-App analyses a user's data, learns patterns, makes a model for a user, and finally predicts, based on the user model and current context, what application(s) the user is likely to want to use. The prediction is pro-active and dynamic, reflecting the current context, and is also dynamic in that it responds to changes in the user model, as might occur over time as a user's habits change. Initial evaluation of Next-App indicates a high-level of satisfaction with the service.

A service-oriented user interaction analysis framework supporting adaptive applications

A comprehensive user model, built by monitoring a user's current use of applications, can be an excellent starting point for building adaptive user-centred applications. The BaranC framework monitors all user interaction with a digital device (e.g. smartphone), and also collects all available context data (such as from sensors in the digital device itself, in a smart watch, or in smart appliances) in order to build a full model of user application behaviour. The model built from the collected data, called the UDI (User Digital Imprint), is further augmented by analysis services, for example, a service to produce activity profiles from smartphone sensor data. The enhanced UDI model can then be the basis for building an appropriate adaptive application that is user-centred as it is based on an individual user model. As BaranC supports continuous user monitoring, an application can be dynamically adaptive in real-time to the current context (e.g. time, location or activity). Furthermore, since BaranC is continuously augmenting the user model with more monitored data, over time the user model changes, and the adaptive application can adapt gradually over time to changing user behaviour patterns. BaranC has been implemented as a service-oriented framework where the collection of data for the UDI and all sharing of the UDI data are kept strictly under the user's control. In addition, being service-oriented allows (with the user's permission) its monitoring and analysis services to be easily used by 3rd parties in order to provide 3rd party adaptive assistant services. An example 3rd party service demonstrator, built on top of BaranC, proactively assists a user by dynamic predication, based on the current context, what apps and contacts the user is likely to need. BaranC introduces an innovative user-controlled unified service model of monitoring and use of personal digital activity data in order to provide adaptive user-centred applications. This aims to improve on the current situation where the diversity of adaptive applications results in a proliferation of applications monitoring and using personal data, resulting in a lack of clarity, a dispersal of data, and a diminution of user control.

Modelling and simulations of ductile iron solidification-induced variations in mechanical behaviour on component and microstructural level

The mechanical behaviour and performance of a ductile iron component is highly dependent on the local variations in solidification conditions during the casting process. Here we show a framework which combine a previously developed closed chain of simulations for cast components with a micro-scale Finite Element Method (FEM) simulation of the behaviour and performance of the microstructure. A casting process simulation, including modelling of solidification and mechanical material characterization, provides the basis for a macro-scale FEM analysis of the component. A critical region is identified to which the micro-scale FEM simulation of a representative microstructure, generated using X-ray tomography, is applied. The mechanical behaviour of the different microstructural phases are determined using a surrogate model based optimisation routine and experimental data. It is discussed that the approach enables a link between solidification- and microstructure-models and simulations of as well component as microstructural behaviour, and can contribute with new understanding regarding the behaviour and performance of different microstructural phases and morphologies in industrial ductile iron components in service.

Deindustrialisation and industrial communities: the Lanarkshire coalfields c.1947-1983

This thesis examines deindustrialisation, the declining contribution of industrial activities to economic output and employment, in Lanarkshire, Scotland’s largest coalfield between the early nineteenth and mid-twentieth century. It focuses on contraction between the National Coal Board’s (NCB) vesting in 1947 and the closure of Lanarkshire’s last colliery, Cardowan, in 1983. Deindustrialisation was not the natural outcome of either market forces or geological exhaustion. Colliery closures and falling coal employment were the result of policy-makers’ decisions. The thesis consists of four thematic chapters: political economy, moral economy, class and community, and generation and gender. The analysis is based on archival sources including Scottish Office reports and correspondence relating to regional policy, and NCB records. These are supported by National Union of Mineworkers Scottish Area and STUC meeting minutes, and oral history testimonies from over 30 men and women with Lanarkshire coalfield backgrounds, as well as two focus groups. The first two chapters analyse the process of deindustrialisation, with the first offering a top-down perspective and the second a bottom-up viewpoint. In chapter one deindustrialisation is analysed through changes in political economy. Shifts in labour market structure are examined through the development of regional policy and its administration by the Scottish Office. The analysis centres upon a policy network of Scottish business elites and civil servants who shaped a vision of modernisation via industrial diversification through attracting inward investment. In chapter two the perspective shifts to community and workforce. It analyses responses to coalfield contraction through a moral economy of customary rights to colliery employment. A detailed investigation of Lanarkshire colliery closures between the 1940s and 1980s emphasises the protracted nature of deindustrialisation. Chapters three and four consider the social and cultural structures which shaped the moral economy but were heavily altered by deindustrialisation. Chapter three focuses on the dense networks that linked occupation, community, and class consciousness. Increasing coalfield centralisation and remote control of pits from NCB headquarters in London, and mounting hostility to coal closures, contributed to an accentuated sense of Scottish-ness. Chapter four illuminates gender and generational dimensions. The differing experiences of cohorts of men who faced either early retirement, redundancy or transfer to alternative sectors, or those who never attained anticipated industrial employment due to final closures, are analysed in terms of constructions of masculinity and the endurance of cultural as well as material losses. This is counterpoised to women who gained industrial work in assembly plants and the perceived gradual attainment of an improved economic and social position whilst continuing to navigate structures of patriarchy.

The significant role of third-party logistics (3pl) operators as fosterers of organizational performance in colombian companies

La eliminación de barreras entre países es una consecuencia que llega con la globalización y con los acuerdos de TLC firmados en los últimos años. Esto implica un crecimiento significativo del comercio exterior, lo cual se ve reflejado en un aumento de la complejidad de la cadena de suministro de las empresas. Debido a lo anterior, se hace necesaria la búsqueda de alternativas para obtener altos niveles de productividad y competitividad dentro de las empresas en Colombia, ya que el entorno se ha vuelto cada vez más complejo, saturado de competencia no sólo nacional, sino también internacional. Para mantenerse en una posición competitiva favorable, las compañías deben enfocarse en las actividades que le agregan valor a su negocio, por lo cual una de las alternativas que se están adoptando hoy en día es la tercerización de funciones logísticas a empresas especializadas en el manejo de estos servicios. Tales empresas son los Proveedores de servicios logísticos (LSP), quienes actúan como agentes externos a la organización al gestionar, controlar y proporcionar actividades logísticas en nombre de un contratante. Las actividades realizadas pueden incluir todas o parte de las actividades logísticas, pero como mínimo la gestión y ejecución del transporte y almacenamiento deben estar incluidos (Berglund, 2000). El propósito del documento es analizar el papel de los Operadores Logísticos de Tercer nivel (3PL) como promotores del desempeño organizacional en las empresas colombianas, con el fin de informar a las MIPYMES acerca de los beneficios que se obtienen al trabajar con LSP como un medio para mejorar la posición competitiva del país.

Propuesta para el mejoramiento de la seguridad de Inversiones ABC S.A.S

Inversiones ABC S.A.S es una empresa colombiana situada en la ciudad de Bogotá, la cual ofrece servicios cambiarios y de intermediación financiera al segmento específico de las empresas de transporte terrestre de carga en la capital del país. La actividad principal de la empresa consiste en el cambio de cheques y la compra de facturas (factoring). Derivados de dicha actividad se ofrecen los siguientes servicios; servicio por ventanilla, servicio puerta a puerta (a domicilio) y consignaciones y giros en bancos y otras entidades como Efecty, Super giros, Western Union (giros y finanzas) y demás casas de giros presentes actualmente en el país. Con base en lo anterior, es posible afirmar que la liquidez constituye en elemento fundamental para el óptimo funcionamiento de los procesos de la compañía. Sin embargo, la tenencia de altas sumas de dinero en efectivo supone también una serie de riesgos asociados a la problemática de inseguridad en la capital del país. Anteriormente, se han presentado asaltos a la sede principal los cuales generalmente resultan en pérdidas económicas que afectan los resultados de la compañía al igual que acciones violentas contra los empleados que atentan contra su integridad física. 1 Teniendo en cuenta que la inseguridad en Bogotá es una amenaza constante, que afecta la operación de la empresa y podría inclusive amenazar su perdurabilidad, el presente trabajo tiene como fin determinar estrategias viables que permitan a la compañía contrarrestar el accionar delictivo de los grupos criminales que amenazan su operación.

Accidentes de trabajo e índice de masa corporal en vigilantes atendidos en una I.P.S. de salud ocupacional, Bogotá - Colombia, 2015

INTRODUCCIÓN: Todos los individuos dentro de una sociedad tienen derecho a disfrutar de una integridad física, mental y de sus bienes materiales, que en principio debe ser garantizada por el Estado, sin embargo, debido a la ineficacia y falta de alcance en la disponibilidad de hombres y mujeres para cuidar a cada persona y empresa, la Seguridad Privada ha surgido como actividad económica para garantizar éste servicio de manera individualizada. No obstante a ello, poco se sabe acerca de las características de las personas que desempeñan ésta labor, así como las demandas inherentes a ésta actividad económica; sin embargo, en poblaciones económicamente similares, se documenta a través de la literatura la aparente relación entre la condición física del individuo y la presentación de accidentes de trabajo. OBJETIVO: Establecer la relación entre los accidentes de trabajo y el índice de masa corporal (IMC) en vigilantes atendidos en una I.P.S. de Salud Ocupacional en la ciudad de Bogotá-Colombia, durante el año 2015. MATERIALES Y MÉTODOS: Se llevó a cabo un estudio de corte transversal, con datos secundarios de una base de datos de 76 registros, procedentes de las historias clínicas médico ocupacionales realizadas a una población de trabajadores del sector de la Vigilancia o Seguridad Privada, durante su atención en una Institución Prestadora de Salud (I.P.S.) de Salud Ocupacional. Se incluyeron variables sociodemográficas, ocupacionales, las relacionadas con los accidentes de trabajo y el índice de masa corporal. Se obtuvieron las frecuencias univariadas y para las variables de tipo cuantitativo, medidas de tendencia central y dispersión, además de buscar potenciales asociaciones estadísticas, para conocer las variables que se relacionan con el evento estudiado. RESULTADOS: En éste proyecto se destaca que de los trabajadores que desempeñan la actividad económica de Vigilancia y Seguridad Privada, se encuentran en el grupo de 20 a 39 años (56.5%) y pertenecen al género masculino (84.2%); dichos factores contribuyen a la ocurrencia de los accidentes de trabajo (OR de 1.7 y 2.0 respectivamente). Además el I.M.C. de sobrepeso (OR 1.8), la obesidad (OR 1.4); y en sí el cargo de Vigilante concurren a la accidentalidad laboral (OR de 1.1) y con ello al incremento de incapacidad laboral en un 85.5% de 0 a 60 días. CONCLUSIONES: Se deben establecer medidas encaminadas al emprendimiento de sistemas de vigilancia epidemiológica que mitiguen y minimicen el riesgo, con ello la presencia de eventos no deseados en el ámbito laboral para ésta población y la disminución del ausentismo laboral.

Evaluación de la exposición laboral a material particulado en empresas pertenecientes a diferentes sectores económicos en Colombia, 2014

Introducción El material particulado son partículas sólidas y líquidas emitidas al aire, las cuales pueden generar diferentes alteraciones en la salud, variando desde cuadros respiratorios alérgicos, a episodios asmáticos, dermatitis o inclusive llegar a facilitar la génesis de enfermedades de tipo neoplásico. Estos pueden tener origen natural e industrial, encontrandose en diferentes actividades económicas. Objetivo Evaluar la exposición laboral a material particulado en empresas pertenecientes a diferentes sectores económicos afiliadas a una ARL en Colombia, en el periodo comprendido entre 2011 al 2014 Metodología Es un estudio de corte transversal, analizando una base de datos de 257 empresas con 1108 mediciones de material particulado, recolectados entre 2011 – 2014. Las variables usadas fueron: región, actividad económica, área, oficio, tiempo de exposición y concentración de material particulado. Se realizó distribuciones de frecuencia, medidas de tendencia central y de dispersión. Se evaluaron las diferencias de las distribuciones de los tiempos de exposición y el porcentaje de exposición entre los grupos con y sin riesgo (los que sobrepasaban o no los límites permisibles), con la prueba asintótica no paramétrica de Mann Whitney. Resultados Las principales mediciones ambientales en las empresas fueron en la industria química con un 31%, siendo 2 de cada 3 datos pertenecientes a la región andina, las cuales tienen como principales contaminantes químicos las partículas no fraccionadas con el 70,9%. Respecto a las concentraciones ambientales de material particulado en las empresas participantes, se encontró un promedio de 1,72 mg/m3 ± 3,613, con una mediana de 0,480 mg/m3 y un coeficiente de variación de 210,05%. El 2,9% sobrepasaron los valores límites establecidos por la ACGIH (American Conference of Governmental Industrial Hygienists) y el 92,5% según los límites de la EPA (Agencia de Protección del Ambiente), presentando mayor riesgo en el personal operativo con 93,3% (p= 0,002). Conclusión El riesgo según los límites establecidos por la ACGIH para las mediciones realizadas en Colombia fue bajo, aunque al utilizar los parámetros de la EPA, el riesgo fue alto, por lo cual se requiere hacer un seguimiento específico a estas empresas y fomentar la implementación del sistema de gestión en seguridad y salud en el trabajo.

Previsione dell'evoluzione della microstruttura in processi industriali di estrusione delle leghe di alluminio serie AA6XXX

Nell’ambito di questa ricerca sono stati sviluppati modelli in grado di prevedere le dimensioni dei grani dopo il processo di estrusione di alcune leghe serie 6XXX, in particolare AA6060, AA6063 e AA6082. Alcuni modelli matematici proposti in letteratura sono stati presi in considerazione e implementati su Qform, codice FEM in grado di simulare processi di deformazione plastica. Sono state condotte diverse campagne sperimentali, tra cui una di visioplasticità necessaria per ottenere dati sperimentali che permettessero la validazione del Codice (modellazione dell’attrito, dello scambio termico, del flow stress del materiale). Altre prove di microestrusione ed estrusione inversa hanno fornito dati sperimentali che sono stati messi in correlazione con i risultati numerici di una serie di simulazioni. Infine è stata effettuata una campagna sperimentale di estrusione industriale a tutti gli effetti, ottenendo un profilo dalla geometria piuttosto complessa in lega AA6063, i dati ricavati hanno permesso : • la validazione di un modello unico di ricristallizzazione dinamica, • la valutazione di modelli per la predizione del comportamento durante recristallizzazione statica

Design, development, and analysis of hybrid metal-composite tube for industrial application

In the aerospace, automotive, printing, and sports industries, the development of hybrid Carbon Fiber Reinforced Polymer (CFRP)-metal components is becoming increasingly important. The coupling of metal with CFRP in axial symmetric components results in reduced production costs and increased mechanical properties such as bending, torsional stiffness, mass reduction, damping, and critical speed compared to the single material-built ones. In this thesis, thanks to a novel methodology involving a rubbery/viscoelastic interface layer, several hybrid aluminum-CFRP prototype tubes were produced. Besides, an innovative system for the cure of the CFRP part has been studied, analyzed, tested, and developed in the company that financed these research activities (Reglass SRL, Minerbio BO, Italy). The residual thermal stresses and strains have been investigated with numerical models based on the Finite Element Method (FEM) and compared with experimental tests. Thanks to numerical models, it was also possible to reduce residual thermal stresses by optimizing the lamination sequence of CFRP and determining the influence of the system parameters. A novel software and methodology for evaluating mechanical and damping properties of specimens and tubes made in CFRP were also developed. Moreover, to increase the component's damping properties, rubber nanofibers have been produced and interposed throughout the lamination of specimens. The promising results indicated that the nanofibrous mat could improve the material damping factor over 77% and be adopted in CFRP components with a negligible increment of weight or losing mechanical properties.

Metal additive manufacturing of soft magnetic material for electric machines

This research work concerns the application of additive manufacturing (AM) technologies in new electric mobility sectors. The unmatched freedom that AM offers can potentially change the way electric motors are designed and manufactured. The thesis investigates the possibility of creating optimized electric machines that exploit AM technologies, with potential in various industrial sectors, including automotive and aerospace. In particular, we will evaluate how the design of electric motors can be improved by producing the rotor core using Laser Powder Bed Fusion (LPBF) and how the resulting design choices affect component performance. First, the metallurgical and soft magnetic properties of the pure iron and silicon iron alloy parts (Fe-3% wt.Si) produced by LPBF will be defined and discussed, considering the process parameters and the type of heat treatment. This research shows that using LPBF, both pure iron and iron silicon, the parts have mechanical and magnetic properties different from the laminated ones. Hence, FEM-based modeling will be employed to design the rotor core of an SYN RM machine to minimize torque ripple while maintaining structural integrity. Finally, we suggest that further research should extend the field of applicability to other electrical devices.

Automated service provisioning in programmable network infrastructures

Modern networks are undergoing a fast and drastic evolution, with software taking a more predominant role. Virtualization and cloud-like approaches are replacing physical network appliances, reducing the management burden of the operators. Furthermore, networks now expose programmable interfaces for fast and dynamic control over traffic forwarding. This evolution is backed by standard organizations such as ETSI, 3GPP, and IETF. This thesis will describe which are the main trends in this evolution. Then, it will present solutions developed during the three years of Ph.D. to exploit the capabilities these new technologies offer and to study their possible limitations to push further the state-of-the-art. Namely, it will deal with programmable network infrastructure, introducing the concept of Service Function Chaining (SFC) and presenting two possible solutions, one with Openstack and OpenFlow and the other using Segment Routing and IPv6. Then, it will continue with network service provisioning, presenting concepts from Network Function Virtualization (NFV) and Multi-access Edge Computing (MEC). These concepts will be applied to network slicing for mission-critical communications and Industrial IoT (IIoT). Finally, it will deal with network abstraction, with a focus on Intent Based Networking (IBN). To summarize, the thesis will include solutions for data plane programming with evaluation on well-known platforms, performance metrics on virtual resource allocations, novel practical application of network slicing on mission-critical communications, an architectural proposal and its implementation for edge technologies in Industrial IoT scenarios, and a formal definition of intent using a category theory approach.

Edge and Big Data technologies for Industry 4.0 to create an integrated pre-sale and after-sale environment

The fourth industrial revolution, also known as Industry 4.0, has rapidly gained traction in businesses across Europe and the world, becoming a central theme in small, medium, and large enterprises alike. This new paradigm shifts the focus from locally-based and barely automated firms to a globally interconnected industrial sector, stimulating economic growth and productivity, and supporting the upskilling and reskilling of employees. However, despite the maturity and scalability of information and cloud technologies, the support systems already present in the machine field are often outdated and lack the necessary security, access control, and advanced communication capabilities. This dissertation proposes architectures and technologies designed to bridge the gap between Operational and Information Technology, in a manner that is non-disruptive, efficient, and scalable. The proposal presents cloud-enabled data-gathering architectures that make use of the newest IT and networking technologies to achieve the desired quality of service and non-functional properties. By harnessing industrial and business data, processes can be optimized even before product sale, while the integrated environment enhances data exchange for post-sale support. The architectures have been tested and have shown encouraging performance results, providing a promising solution for companies looking to embrace Industry 4.0, enhance their operational capabilities, and prepare themselves for the upcoming fifth human-centric revolution.