Past, present and future - assessing changes in aquatic environments using subfossil diatoms

The deterioration of surface waters is one of the most important issues in the environmental management of the European Union. Thus, the EU Water Framework Directive 2000/60/EC (WFD) requires “good ecological and chemical status” of surface waters by 2015 allowing only a slight departure from ecological reference conditions characterized by the biological communities typical for the conditions of minimal anthropogenic impact. The WFD requires the determination of ecological reference conditions and the present ecological status of surface waters. To meet this legislative demand, sedimentary diatom assemblages were used in these studies with various methods 1) to assess natural and human activity induced environmental changes, 2) to characterize background conditions 3) to evaluate the present ecological status and 4) to predict the future of the water bodies in the light of palaeolimnological data. As the WFD refers to all surface waters, both coastal and inland sites were included. Two long and two short sediment cores from the Archipelago Sea in the northern Baltic Sea were examined for their siliceous microfossils in order to assess (1) the Holocene palaeoenvironmental history and (2) the recent eutrophication of the area. The diatom record was divided into local diatom assemblage zones (LDAZ, long cores) and diatom assemblage zones (DAZ, short cores). Locally weighted weighted averaging regression and calibration (LWWA) was applied for the quantitative reconstruction of past TN concentrations (short cores). An age model for the long cores was constructed by using independent palaeomagnetic and AMS-14C methods. The short cores were dated using radiometric (210Pb, 226Ra and 137Cs) methods. The long cores date back to the early history of the Archipelago Sea, which was freshwater – no salinity increase referable to the brackish phase of the Yoldia Sea is recognized. The nutrient status of the lacustrine phase was slightly higher in the Archipelago Sea than in the Baltic Proper. Initial brackish-water influence is observed at 8 150 ±80 cal. BP (LDAZ4), but fully brackish conditions were established at 7 700 ±80 cal. BP (LDAZ5). The diatom assemblages indicate increasing salinity, warming climate and possible eutrophic conditions during the lacustrine to brackish-water transition. The decreasing abundance of Pseudosolenia calcar-avis (Schultze) Sundström and the increasing abundance of the ice-cover indicator species Pauliella taeniata (Grunow) Round and Basson indicate decreasing salinity and climatic cooling after ca. 5 000 cal. BP. Signs of eutrophication are visible in the most recent diatom assemblage zones of both short cores. Diatom-inferred total nitrogen (DI-TN) reconstructions partially fail to trace the actual measured total nitrogen concentrations especially from the late 1980s to the mid 1990s. This is most likely due to the dominating diatom species Pauliella taeniata, Thalassiosira levanderi Van Goor and Fragilariopsis cylindrus (Grunow) W. Krieger being more influenced by factors such as the length of the ice-season rather than nutrient concentrations. It is concluded that the diatom assemblages of the study sites are principally governed by climate fluctuations, with a slight influence of eutrophication visible in the most recent sediments. There are indications that global warming, with reduced ice cover, could impact the spring blooming diatom species composition in the Archipelago Sea. In addition, increased sediment accumulation in the early 90s coincides with the short ice-seasons suggesting that warming climate with decreasing ice-cover may increase sedimentation in the study area. The diverse diatom assemblages dominated by benthic species (54 %) in DAZ1 in the Käldö Fjärd core can be taken as background diatom assemblages for the Archipelago Sea. Since then turbidity has increased and the diatom assemblages have been dominated by planktonic diatoms from around the mid 1800s onwards. The reconstructed reference conditions for the total nitrogen concentrations fluctuate around 400 μg l-1. Altogether two short sediment cores and eight short cores for top-bottom analysis were retrieved from Lake Orijärvi and Lake Määrjärvi to assess the impact of the acid mine drainage (AMD) derived metals from the Orijärvi mine tailings on the diatom communities of the lakes. The Cu (Pb, Zn) mine of Orijärvi (1757 – 1956) was the first one in Finland where flotation techniques (1911 – 1955) were used to enrich ore and large quantities of tailings were produced. The AMD derived metal impact to the lakes was found to be among the heaviest thus far recorded in Finland. Concentrations of Cu, Pb and Zn in Lake Orijärvi sediments are two to three orders of magnitude higher than background values. The metal inputs have affected Lake Orijärvi and Lake Määrjärvi diatom communities at the community levels through shifts in dominant taxa (both lakes) and at the individual level through alteration in frustule morphology (Lake Orijärvi). At present, lake water still has elevated heavy metal levels, indicating that the impact from the tailings area continues to affect both lakes. Lake Orijärvi diatom assemblages are completely dominated by benthic species and are lacking planktonic diatoms. In Lake Määrjärvi the proportion of benthic and tychoplanktonic diatoms has increased and the planktonic taxa have decreased in abundance. Achnanthidium minutissimum Kützing and Brachysira vitrea (Grun.) R. Ross in Hartley were the most tolerant species to increased metal concentrations. Planktonic diatoms are more sensitive to metal contamination than benthic taxa, especially species in the genus Cyclotella (Kützing) Brébisson. The ecological reference conditions assessed in this study for Lake Orijärvi and Lake Määrjärvi comprise diverse planktonic and benthic communitites typical of circumneutral oligotrophic lakes, where the planktonic diatoms belonging to genera Cyclotella , Aulacoseira Thwaites, Tabellaria Ehrenberg and Asterionella Hassall dominate in relative abundances up to ca. 70%. The benthic communities are more diverse than the planktonic consisting of diatoms belonging to the genera Achnanthes Bory, Fragilaria Lyngbye and Navicula St. Vincent. This study clearly demonstrates that palaeolimnological methods, especially diatom analysis, provide a powerful tool for the EU Water Frame Work Directive for defining reference conditions, natural variability and current status of surface waters. The top/bottom approach is a very useful tool in larger-scale studies needed for management purposes. This “before and after” type of sediment sampling method can provide a very time and cost effective assessment of ecological reference conditions of surface waters.

Future vision of information networks according to EU 7th framework

The purpose of this thesis is to investigate projects funded in European 7th framework Information and Communication Technology- work programme. The research has been limited to issue ”Pervasive and trusted network and service infrastructure” and the aim is to find out which are the most important topics into which research will concentrate in the future. The thesis will provide important information for the Department of Information Technology in Lappeenranta University of Technology. First in this thesis will be investigated what are the requirements for the projects which were funded in “Pervasive and trusted network and service infrastructure” – programme 2007. Second the projects funded according to “Pervasive and trusted network and service infrastructure”-programme will be listed in to tables and the most important keywords will be gathered. Finally according to the keyword appearances the vision of the most important future topics will be defined. According to keyword-analysis the wireless networks are in important role in the future and core networks will be implemented with fiber technology to ensure fast data transfer. Software development favors Service Oriented Architecture (SOA) and open source solutions. The interoperability and ensuring the privacy are in key role in the future. 3D in all forms and content delivery are important topics as well. When all the projects were compared, the most important issue was discovered to be SOA which leads the way to cloud computing.

Teknologinen kehitys hyvinvointivaltiossa

Tämän diplomityön tavoitteena on luoda poikkitieteellinen katsaus teknologisen kehityksen vaikutuksiin hyvinvointivaltion perusrakenteille, kuten työnteko, yrityskulttuuri, peruskoulutus sekä innovaatiopolitiikka. Työ pyrkii osoittamaan myös hyvinvointivaltion roolin Suomen kilpailu- ja innovaatiokyvyn kannalta. Työn viitekehys rakentuu teknisten-, yhteiskuntatieteiden, sosiologian sekä tämän päivän heikkojen signaalien varaan. Työ yhdistää erilaiset näkökulmat yhdeksi kokonaisuudeksi, josta myös lukija voi luoda oman näkemyksensä. Johtopäätöksinä työssä huomataan hyvinvointivaltion roolin suuruus puhuttaessa suomalaisesta innovaatio- ja kilpailukyvystä. Tasa-arvoinen peruskoulutusjärjestelmä, tulonsiirrot sekä sosiaalinen turvaverkko ovat olleet luomassa pohjaa nykyiselle hyvinvoinnillemme sekä kilpailukyvyllemme. Kuitenkin nämä järjestelmät ovat jäämässä ajastaan jälkeen, sillä niitä ei ole suunniteltu kansallisvaltioiden väliseen kilpailuun. Yksityistäminen ja globaalille kilpailulle avautuminen ovat nähty maailmalla ratkaisuna tähän ongelmaan, kuten Englannissa tehtiin 40 vuotta sitten. Yksityistämisen vaikutukset hyvinvointivaltioon ovat kuitenkin arvaamattomia, sillä hyvinvointivaltio on vielä varsin tutkimaton käsite. Teknologinen kehitys on ollut luomassa kilpailuetuamme ja siitä voidaan olettaa myös luovan tulevaa kilpailuetua. Suomeen on saatava uudenlainen johtamisen- ja yhteiskunnallisen ymmärtämisen kulttuuri, joka huomioi myös globalisaation mukanaan tuomia muutoksia. Se yhdistettynä teknologian kehitykseen ja innovaatiopolitiikkaan saattaa olla Suomen tulevaisuuden kannalta ratkaiseva innovatiivinen kilpailuetu.

An Overview Of British Automotive Industry: Implications From History and Recommendations for Future

This thesis is a literary research, which aims to uncover reasons for the downfall of automotive industry in the United Kingdom in the late 20th century. First, there is a short review on the history of the industry in the UK and then there are more present cases presented in the form of BMW-Rover and Tata-Jaguar Land Rover. Finally, the thesis suggests some ideas to which the UK should work towards in order to ensure future competitiveness. The automotive industry in the United Kingdom is one of the oldest in the world, but as the end of last millennium was approaching it was not doing too well. Industry that was still flourishing in the mid-century was soon heading down river and by the end of the century all large English car manufacturers had either closed down or were forced under foreign ownership. The thesis suggests possible targets for future prospects from the literary review and from the conclusions made. These are to ensure the continuity of the industry and the competitiveness on an international level. The suggestions are for long term and are mainly focused around research and development of renewable energy forms.

Kompressoriyksiköiden mekaaninen kunnonhallinta

Kunnossapidon kuluista suurimman osan aiheuttavat koneiden ennakoimattomat rikkoutumiset ja niiden tuomat tuotannonpysäytykset. Kunnossapidon suunnitelmallisuutta ja vikojen ennustettavuutta pyritään parantamaan erilaisin kunnonvalvonnallisin keinoin. Havaitsemalla alkava vikaantuminen ajoissa ja seuraamalla sen kehittymistä luodaan mahdollisuus korjaustoimenpiteiden ja -ajankohdan hallittuun suunnitteluun ja tätä kautta kustannussäästöihin. Tässä työssä on tutkittu kompressoriyksiköiden (kaasuturbiini ja keskipakokompressori) ja niiden apulaitteiden kunnossapidon menetelmiä, niiden hyödynnettävyyttä sekä mahdollisuuksia kehittää mekaanista kunnonhallintaa. Työssä päädyttiin johtopäätökseen, että käytettävien menetelmien hyödynnettävyydessä on kehitettävää. Kunnonvalvonnan ohjeistuksia tarkennettiin vastaamaan tämän päivän tavoitteita. Todettiin myös, että värähtelynvalvontaan perustuva kunnonvalvontajärjestelmä soveltuu hyvin kompressoriyksiköiden kunnonvalvonnan järjestelmäksi. Värähtelynvalvontaan perustuva kunnonvalvontajärjestelmä luo mahdollisuuden turvallisen käyttöajan ennustamiseen. Kunnonvalvonnan kehittämisen ja käyttövarmuuden parantamisen kannalta jatkotutkimuksen tekeminen kompressoriyksiköiden mekaanistenlaitteiden turvallisen käyttöajan ennustamiseksi on perusteltua.

Career satisfaction among medical school professors: a case study in Brazil

OBJECTIVE: To investigate the career satisfaction of medical school professors in relation to initial motivation, satisfaction factors, and the desire to remain in the profession. METHODOLOGY: A qualitative methodology was used, based on questionnaires and semi-structured interviews with faculty members at a federal institution of higher education in Brazil. RESULTS: For 42.86% of the sample, teaching began while they were medical students; 80% had chosen teaching either as a vocation or due to influence from families or professors; 20% chose teaching as a professional opportunity. The majority, 57.14%, stated they were happy with teaching, and 51.42% did not plan to leave the career. Factors involved in satisfaction with teaching were: the possibility of remaining up-to-date in the medical profession, the feeling of doing their duty, their contribution to training future doctors, and contact with young people and the university setting. Factors leading to dissatisfaction were pedagogical (33.33%), economic (30.95%), institutional (14.28%), and relational (14.28%). CONCLUSIONS: Subjects expressed a positive attitude towards teaching, and because of their great personal satisfaction with the career, they did not plan to leave it. These findings should shed light on factors that interfere with career satisfaction and help increase those that promote satisfaction, thus improving the productivity and well-being of medical professors.

The Productivity, Economy and Quality of Welding in the Different Geographical Areas of China - Today and in the Future

This master’s thesis gives out the real situation of the China welding industry and factories nowadays in different geographical areas, in order to inform the Finnish companies who have the willing to find a Chinese welding subcontractor a proper and correct selection concept by analyzing and supplying the information of different scale and form welding factories in different Chinese areas. The first section of this thesis gives out the general situation about the co-operation between China and Finland in the welding industry, also includes the general introduction of the Chinese welding industry. The second section gives out the geographical compartmentalization result of Chinese welding industry, which is where and how many areas will be studied in this thesis. The main body of this thesis is the real information of welding productivity, welding cost, and welding quality in China. All the information was collected from real factories in China by the author. The last section of this thesis is the improvements to the Chinese welding factories that have the willing to become a subcontractor, and the suggestions to the Finnish companies who may find a Chinese welding factory as their subcontractor in future.

Future revenue models: Transformation from textbooks to digital solutions in the educational publishing industry, Case Sanoma Learning

This study was conducted in order to learn how companies’ revenue models will be transformed due to the digitalisation of its products and processes. Because there is still only a limited number of researches focusing solely on revenue models, and particularly on the revenue model change caused by the changes at the business environment, the topic was initially approached through the business model concept, which organises the different value creating operations and resources at a company in order to create profitable revenue streams. This was used as the base for constructing the theoretical framework for this study, used to collect and analyse the information. The empirical section is based on a qualitative study approach and multiple-case analysis of companies operating in learning materials publishing industry. Their operations are compared with companies operating in other industries, which have undergone comparable transformation, in order to recognise either similarities or contrasts between the cases. The sources of evidence are a literature review to find the essential dimensions researched earlier, and interviews 29 of managers and executives at 17 organisations representing six industries. Based onto the earlier literature and the empirical findings of this study, the change of the revenue model is linked with the change of the other dimen-sions of the business model. When one dimension will be altered, as well the other should be adjusted accordingly. At the case companies the transformation is observed as the utilisation of several revenue models simultaneously and the revenue creation processes becoming more complex.

Future prospects of short distance rail based passenger transport in Northern Europe

The worlds’ population is increasing and cities have become more crowded with people and vehicles. Communities in the fringe of metropolitans’ increase the traffic done with private cars, but also increase the need for public transportation. People have typically needs traveling to work located in city centers during the morning time, and return to suburbs in the afternoon or evening. Rail based passenger transport is environmentally friendly transport mode with high capacity to transport large volume of people. Railways have been regulated markets with national incumbent having monopoly position. Opening the market for competition is believed to have a positive effect by increasing the efficiency of the industry. National passenger railway market is opened for competition only in few countries, where as international traffic in EU countries was deregulated in 2010. The objective of this study is to examine the passenger railway market of three North European countries, Sweden, Denmark and Estonia. The interest was also to get an understanding of the current situation and how the deregulation has proceeded. Theory of deregulation is unfolded with literature analyses and empirical part of the study is constructed from two parts. Customer satisfaction survey was chosen as a method to collect real life experiences from the passengers and measure their knowledge of the market situation and possible changes appeared. Interviews of experts from the industry and labor unions give more insights and able better understanding for example of social consequences caused from opening the market for competition. Expert interviews were conducted by using semi-structured theme interview. Based on the results of this study, deregulation has proceeded quite differently in the three countries researched. Sweden is the most advanced country, where the passenger railway market is open for new entrants. Denmark and Estonia are lagging behind. Opening the market is considered positive among passengers and most of the experts interviewed. Common for the interviews were the labour unions negative perspective concerning deregulation. Despite the fact deregulation is considered positive among the respondents of the customer satisfaction survey, they could not name railway undertakings operating in their country. Generally respondents were satisfied with the commuter trains. Ticket price, punctuality of trains and itinerary affect the most to customer satisfaction.