Utilization of free and microencapsulated Rosmarinus oficinalis L. extracts as bioactives ingredientes for new functional foods developmen

Currently, many consumers search for food with functional characteristics beyond their nutritional properties. Thus, the concept of functional food becomes a hot topic, allowing the obtaining of health benefits, including disease prevention. In this context, plants are recognized as sources of a wide range of bioactives, mainly phenolic compounds. In particular, the Rosmarinus officina/is L., commonly referred as rosemary, has several phenolic compounds with different bioactive properties such as antioxidant, antiinflammatory and antimicrobial activities, among others [!]. Hence, this plant has great potential for incorporation into foods in order to confer bioactivity to the final products. However, it should be highlighted that the bioactive compounds if exposed to adverse environments, for example: light, moisture, extreme pH, storage, food processing conditions, can be degraded leading to the consequent loss of bioactivity [2]. The microencapsulation is an alternative to overcome this problematic of bioactive compounds, as also to ensure controlled release, or target deliver to a specific site [3]. In this work, lyophilized rosemary aqueous extract prepared by in:'usion was used as a functional ingredient for cottage cheeses, after proving that it possesses, both higher content in phenolic compounds and higher antioxidant activity, comparatively with the corresponding hydroethanolic extract. The rosemary aqueous extract revealed, for example, a DPPH scavenging activity with an EC50 value of 73.44±0.54j!g/mL and presented as main phenolic compound the caffeic acid dimer, commonly named as rosmarinic acid. For the functionalized cottage cheeses, a decrease of bioactivity was observed after seven days under storage in fridge, when the extracts were incorporated in its free form. Therefore, to preserve the antioxidant activity, the rosemary aqueous extract was efficiently microencapsulated by using an atomization/coagulation technique and alginate as the matrix material and thereafter incorporated into the cottage cheeses. The final microspheres showed a size, estimated by OM using a magnification of I OOx, ranging between 51.1 and 122.6 J!m and an encapsulation efficiency, estimated through an indirect method, approaching 100%. Overall, the introduction of both free and microencapsulated extracts did not change the nutritional value of cottage cheeses, providing bioactivity that was more preserved with microencapsulated extracts putting in evidence the importance of using microencapsulation to develop effective functional foods.

The concept of low glycemic index and glycemic load foods as panacea for type 2 diabetes mellitus; prospects, challenges and solutions.

Background: This article examines the concepts of low glycemic indices (GIs) and glycemic load (GL) foods as key drivers in the dietary management of type 2 diabetes as well as their shortcomings. The controversies arising from the analysis of glycemic index (GI) and GL of foods such as their reproducibility as well as their relevance to the dietary management of type 2 diabetes are also discussed. Methods: Search was conducted in relevant electronic databases such as: Pubmed, Google Scholar, HINARI, the Cochrane library, Popline, LILACS, CINAHL, EMBASE, etc to identify the current status of knowledge regarding the controversies surrounding management of diabetes with low GI and GL foods. Conclusion: This article suggests that in view of discrepancies that surround the results of GI versus GL of foods, any assay on the GI and GL of a food with the aim of recommending the food for the dietary management of type 2 diabetes, could be balanced with glycated hemoglobin assays before they are adopted as useful antidiabetic foods.

Effect of pre-treatments and post-treatments on drying products

Freeze drying technology can give good quality attributes of vegetables and fruits in terms of color, nutrition, volume, rehydration kinetics, stability during storage, among others, when compared with solely air dried ones. However, published scientific works showed that treatments applied before and after air dehydration are effective in food attributes, improving its quality. Therefore, the hypothesis of the present thesis was focus in a vast research of scientific work that showed the possibility to apply a pre-treatment and a post-treatment to food products combined with conventional air drying aiming being close, or even better, to the quality that a freeze dried product can give. Such attributes are the enzymatic inactivation, stability during storage, drying and rehydration kinetics, color, nutrition, volume and texture/structure. With regard to pre-treatments, the ones studied along the present work were: water blanching, steam blanching, ultrasound, freezing, high pressure and osmotic dehydration. High electric pulsed field was also studied but the food attributes were not explained on detailed. Basically, water and steam blanching showed to be adequate to inactivate enzymes in order to prevent enzymatic browning and preserve the product quality during long storage periods. With regard to ultrasound pre-treatment the published results pointed that ultrasound is an effective pre-treatment to reduce further drying times, improve rehydration kinetics and color retention. On the other hand, studies showed that ultrasound allow sugars losses and, in some cases, can lead to cell disruption. For freezing pre-treatment an overall conclusion was difficult to draw for some food attributes, since, each fruit or vegetable is unique and freezing comprises a lot of variables. However, for the studied cases, freezing showed to be a pre-treatment able to enhance rehydration kinetics and color attributes. High pressure pre-treatment showed to inactivate enzymes improving storage stability of food and showed to have a positive performance in terms of rehydration. For other attributes, when high pressure technology was applied, the literature showed divergent results according with the crops used. Finally, osmotic dehydration has been widely used in food processing to incorporate a desired salt or sugar present in aqueous solution into the cellular structure of food matrix (improvement of nutrition attribute). Moreover, osmotic dehydration lead to shorter drying times and the impregnation of solutes during osmose allow cellular strengthens of food. In case of post-treatments, puffing and a new technology denominated as instant controlled pressure drop (DIC) were reported in the literature as treatments able to improve diverse Abstract Effect of Pre-treatments and Post-treatments on Drying Products x food attributes. Basically, both technologies are similar where the product is submitted to a high pressure step and the process can make use of different heating mediums such as CO2, steam, air and N2. However, there exist a significant difference related with the final stage of both which can comprise the quality of the final product. On the other hand, puffing and DIC are used to expand cellular tissues improving the volume of food samples, helping in rehydration kinetics as posterior procedure, among others. The effectiveness of such pre and/or post-treatments is dependent on the state of the vegetables and fruits used which are also dependent of its cellular structure, variety, origin, state (fresh, ripe, raw), harvesting conditions, etc. In conclusion, as it was seen in the open literature, the application of pre-treatments and post-treatments coupled with a conventional air dehydration aim to give dehydrated food products with similar quality of freeze dried ones. Along the present Master thesis the experimental data was removed due to confidential reasons of the company Unilever R&D Vlaardingen

Prevalence of Listeria species in some foods and their rapid identification

Purpose: To investigate the occurrence of Listeria spp., (particularly L. monocytogenes ), in different foods and to compare diagnostic tools for their identification at species level. Methods: Samples of high protein foods such as raw meats and meat products and including beef products, chicken, fish and camel milk were analysed for the presence of Listeria spp. The isolates were characterised by morphological and cultural analyses, and confirmed isolates were identified by protein profiling and verified using API Listeria system. Protein profiling by SDS-PAGE was also used to identify Listeria spp. Results: Out of 40 meat samples, 14 (35 %) samples were contaminated with Listeria spp., with the highest incidence (50 %) occurring in raw beef products and raw chicken. Protein profiling by SDSPAGE was used to identify Listeria spp. The results were verified with API Listeria system. Approximately 25 % of the identified isolates were Listeria seeligeri , Listeria welshimeri , and Listeria grayi (three positive samples), while 16.66 % of the isolates were Listeria monocytogenes (two positive samples); 16.6 % of the isolates were Listeria innocua (two positive samples), while 8.3 % of the isolates were Listeria ivanovii (one positive sample). Conclusion: High protein foods contain different types of Listeria species; whole-cell protein profiles and API Listeria system can help in the identification of Listeria at the species level.

Determination of acrylamide levels in selected commercial and traditional foods in Syria

Purpose: To determine acrylamide (AA) levels in different brands of commercial and traditional foodstuffs available in Syria by ultra-performance liquid chromatography-mass spectrometery (UPLCMS). Methods: A total of 63 samples were analyzed. Food samples were defatted by hexane and then extracted with methanol 98 % in a vortex mixer. Thereafter, Carrez I and Carrez II were added to precipitate proteins from the co-extractives and then centrifuged to obtain a clear aqueous extract that was evaporated to dryness. The extract was dissolved in 1 mL of water, eluted through a preconditioned Oasis HLB cartridge and then filtered. The filtrate was analyzed by UPLC-MS/MS to determine AA content. Results: Among the commercial foods tested, the highest acrylamide quantity was found in potato products (396 ± 3.59 – 1844 ± 5.29 μg kg−1) and the lowest in corn products (183 ± 2.64 – 366 ± 4.58 μg kg−1). This was followed by biscuits (57 ± 2.64 – 1433 ± 2.51 μg kg−1), breakfast cereals (121 ± 8.73 – 245 ± 3.60 μg kg−1), bread (119 ± 1.73 – 263 ± 3.60 μg kg−1) and then coffee (113 ± 2.64 - 64 ± 3.05 μg kg−1). Regarding traditional foods, the highest level of AA was found in AL- Mshabak (481 ± 2.08 μg kg−1) and AL-Awamat (421 ± 2.64 μg kg−1) followed by AL-Namora (282 ± 4.35 μg kg−1) and AL-Kenafa (242 ± 2.64 μg kg−1). It was also observed that the lowest amount of AA was in fried bread (230 μg kg−1), AL-Fatayer (192 ± 3.51 μg kg−1) and AL-Baqlawa (172 ± 4.35 μg kg−1) while Eid Aqras (130 ± 4.58 μg kg−1) and AL-Brazeq (167 ± 3.78 μg kg−1) contained the least amount of AA. Conclusion: The results indicate that the highest levels of AA are found in the most commonly consumed foods. There was significant difference (p < 0.05) in AA levels among different food items and within different brands of the same product.

Un modelo de gestión de la creatividad que promueva la innovación en las organizaciones: caso Griffith Foods S.A.S.

En la actualidad las organizaciones se encuentran inmersas en un ambiente en extremo cambiante y competitivo que las obliga a estar siempre a la vanguardia y hacer de la innovación un proceso sistemático, que se alimenta no solo de las prospectivas científico-tecnológicas y la inteligencia competitiva, sino también del potencial creativo de su gente -- Pero ¿cómo se potencializa, entonces, la innovación en las organizaciones a partir de la gestión de la creatividad con sus colaboradores? Ése fue el gran interrogante que se planteó en este trabajo de investigación y para contribuir a su solución se diseñó y validó un modelo teórico conceptual que cruza variables que afectan la creatividad y potencializan la innovación, en el marco de posturas de autores reconocidos como Kerrie Unsworth, que trabaja diferentes tipos de creatividad en las personas a través de una matriz que relaciona los problemas de las organizaciones con el nivel de compromiso de los empleados, y Teresa Amabile, con su modelo de creatividad organizacional para la innovación, que permite identificar variables como la motivación, el engagement el liderazgo y la cultura organizacional, entre otras -- Dichas posturas se constituyeron en elementos importantes por considerar para la construcción del modelo, que con posterioridad se validó en dos momentos: el primero con expertos en el tema por medio del método Delphi y el segundo en la organización Griffith Foods S. A. S., a través de una face validity con los gerentes de la compañía -- Con estas validaciones se ajustó el modelo, lo que permitió incorporar otra variable que no se había considerado, el conocimiento, y se identificó la posibilidad de aplicarlo en las diferentes unidades de negocio en la organización -- Por último, como aplicación experimental del mismo, se formularon las recomendaciones para que fuese implementado, no sólo en la organización Griffith Foods S. A. S. como objeto de estudio, sino en otras que deseen potencializar la innovación a partir de la creatividad en las personas y en sus equipos de trabajo

From field to fermentation: characterisation and application of non-dairy cultures in dairy foods

This thesis investigates the phenotypic and genotypic diversity of non-dairy L. lactis strains and their application to dairy fermentations. A bank of non-dairy lactococci were isolated from grass, vegetables and the bovine rumen. Subsequent analysis of these L. lactis strains revealed seven strains to possess cremoris genotypes which did not correlate with their observed phenotypes. Multi-locus sequence typing (MLST) and average nucleotide identity (ANI) highlighted the genetic diversity of lactis and cremoris subspecies. The application of these non-dairy lactococci to cheese production was also assessed. In milk, non-dairy strains formed diverse volatile profiles and selected strains were used as adjuncts in a mini Gouda-type cheese system. Sensory analysis showed non-dairy strains to be strongly associated with the development of off-flavours and bitterness. However, microfluidisation appeared to reduce bitterness. A novel bacteriophage, ɸL47, was isolated using the grass isolate L. lactis ssp. cremoris DPC6860 as a host. The phage, a member of the Siphoviridae, possessed a long tail fiber, previously unseen in dairy lactococcal phages. Genome sequencing revealed ɸL47 to be the largest sequenced lactococcal phage to date and owing to the high % similarity with ɸ949, a second member of the 949 group. Finally, to identify and characterise specific genes which may be important in niche adaptation and for applications to dairy fermentations, comparative genome sequence analysis was performed on L. lactis from corn (DPC6853), the bovine rumen (DPC6853) and grass (DPC6860). This study highlights the contribution of niche specialisation to the intra-species diversity of L. lactis and the adaptation of this organism to different environments. In summary this thesis describes the genetic diversity of L. lactis strains from outside the dairy environment and their potential application in dairy fermentations.

Macroalgae and commercial macroalgal polysaccharides as potential functional ingredients in muscle foods

Ulva rigida (UR) and Palmaria palmata (PP) were included in farmed Atlantic salmon diets at levels of 0-15% for 19 and 16 weeks, respectively. Quality and shelf-life parameters of salmon fillets stored in modified atmosphere packs (MAP) (60% N2 : 40% CO2) at 4ºC were compared to controls fed astaxanthin. Salmon fillets were enhanced with a yellow/orange colour. Proximate composition, pH and lipid oxidation were unaffected by dietary UR and PP. Salmon fed 5% UR and 5-15% PP did not influence sensory descriptors (texture, odour, oxidation flavour and overall acceptability) of cooked salmon fillets. Pig diets were supplemented with commercial wet- and spray-dried macroalgal (Laminaria digitata) polysaccharide extracts containing laminarin (L, 500 mg/kg feed) and fucoidan (F, 420 mg/kg feed) (L/F-WS, L/F-SD) for 3 weeks and quality and shelf-life parameters of fresh pork steaks (longissimus thoracis et lumborum) stored in MAP (80% O2 : 20% CO2) were examined. Level (450 or 900 mg L and F/kg feed) and duration (3 or 6 weeks) of dietary L/F-WS and mechanisms of antioxidant activities in pork were investigated. L/F-WS reduced (p < 0.05) lipid oxidation and lowered levels of saturated fatty acids in fresh pork after 3 weeks feeding. L/F-SD was added directly to mince pork (0.01 - 0.5%) and quality and shelf-life parameters of fresh pork patties stored in MAP (80% O2 : 20% CO2) were assessed. Direct addition of the L/F-SD increased levels of lipid oxidation and decreased surface redness (a* values) of fresh pork patties. Lipid oxidation was reduced in cooked patties due to the formation of Maillard reaction products. Cooked pork patties containing L/F-SD were subjected to an in vitro digestion and a cellular transwell model to confirm bioaccessibility and uptake of antioxidant compounds. In mechanistic studies, fucoidan demonstrated antiand pro-oxidant activities on muscle lipids and oxymyoglobin, respectively.

Experimental and modeling studies of forced convection storage and drying systems for sweet potatoes

Sweet potato is an important strategic agricultural crop grown in many countries around the world. The roots and aerial vine components of the crop are used for both human consumption and, to some extent as a cheap source of animal feed. In spite of its economic value and growing contribution to health and nutrition, harvested sweet potato roots and aerial vine components has limited shelf-life and is easily susceptible to post-harvest losses. Although post-harvest losses of both sweet potato roots and aerial vine components is significant, there is no information available that will support the design and development of appropriate storage and preservation systems. In this context, the present study was initiated to improve scientific knowledge about sweet potato post-harvest handling. Additionally, the study also seeks to develop a PV ventilated mud storehouse for storage of sweet potato roots under tropical conditions. In study one, airflow resistance of sweet potato aerial vine components was investigated. The influence of different operating parameters such as airflow rate, moisture content and bulk depth at different levels on airflow resistance was analyzed. All the operating parameters were observed to have significant (P < 0.01) effect on airflow resistance. Prediction models were developed and were found to adequately describe the experimental pressure drop data. In study two, the resistance of airflow through unwashed and clean sweet potato roots was investigated. The effect of sweet potato roots shape factor, surface roughness, orientation to airflow, and presence of soil fraction on airflow resistance was also assessed. The pressure drop through unwashed and clean sweet potato roots was observed to increase with higher airflow, bed depth, root grade composition, and presence of soil fraction. The physical properties of the roots were incorporated into a modified Ergun model and compared with a modified Shedd’s model. The modified Ergun model provided the best fit to the experimental data when compared with the modified Shedd’s model. In study three, the effect of sweet potato root size (medium and large), different air velocity and temperature on the cooling/or heating rate and time of individual sweet potato roots were investigated. Also, a simulation model which is based on the fundamental solution of the transient equations was proposed for estimating the cooling and heating time at the centre of sweet potato roots. The results showed that increasing air velocity during cooling and heating significantly (P < 0.05) affects the cooling and heating times. Furthermore, the cooling and heating times were significantly different (P < 0.05) among medium and large size sweet potato roots. Comparison of the simulation results with experimental data confirmed that the transient simulation model can be used to accurately estimate the cooling and heating times of whole sweet potato roots under forced convection conditions. In study four, the performance of charcoal evaporative cooling pad configurations for integration into sweet potato roots storage systems was investigated. The experiments were carried out at different levels of air velocity, water flow rates, and three pad configurations: single layer pad (SLP), double layers pad (DLP) and triple layers pad (TLP) made out of small and large size charcoal particles. The results showed that higher air velocity has tremendous effect on pressure drop. Increasing the water flow rate above the range tested had no practical benefits in terms of cooling. It was observed that DLP and TLD configurations with larger wet surface area for both types of pads provided high cooling efficiencies. In study five, CFD technique in the ANSYS Fluent software was used to simulate airflow distribution in a low-cost mud storehouse. By theoretically investigating different geometries of air inlet, plenum chamber, and outlet as well as its placement using ANSYS Fluent software, an acceptable geometry with uniform air distribution was selected and constructed. Experimental measurements validated the selected design. In study six, the performance of the developed PV ventilated system was investigated. Field measurements showed satisfactory results of the directly coupled PV ventilated system. Furthermore, the option of integrating a low-cost evaporative cooling system into the mud storage structure was also investigated. The results showed a reduction of ambient temperature inside the mud storehouse while relative humidity was enhanced. The ability of the developed storage system to provide and maintain airflow, temperature and relative humidity which are the key parameters for shelf-life extension of sweet potato roots highlight its ability to reduce post-harvest losses at the farmer level, particularly under tropical climate conditions.

Sensor psychrometric approaches to mitigating aflatoxins in maize dried on farms in Kenya

Kenia liegt in den Äquatorialtropen von Ostafrika und ist als ein weltweiter Hot-Spot für Aflatoxinbelastung insbesondere bei Mais bekannt. Diese toxischen und karzinogenen Verbindungen sind Stoffwechselprodukte von Pilzen und so insbesondere von der Wasseraktivität abhängig. Diese beeinflusst sowohl die Trocknung als auch die Lagerfähigkeit von Nahrungsmitteln und ist somit ein wichtiger Faktor bei der Entwicklung von energieeffizienten und qualitätsorientierten Verarbeitungsprozessen. Die vorliegende Arbeit hat sich zum Ziel gesetzt, die Veränderung der Wasseraktivität während der konvektiven Trocknung von Mais zu untersuchen. Mittels einer Optimierungssoftware (MS Excel Solver) wurde basierend auf sensorerfassten thermo-hygrometrischen Daten der gravimetrische Feuchteverlust von Maiskolben bei 37°C, 43°C und 53°C vorausberechnet. Dieser Bereich stellt den Übergang zwischen Niedrig- und Hochtemperaturtrocknung dar. Die Ergebnisse zeigen deutliche Unterschiede im Verhalten der Körner und der Spindel. Die Trocknung im Bereich von 35°C bis 45°C kombiniert mit hohen Strömungsgeschwindigkeiten (> 1,5 m / s) begünstigte die Trocknung der Körner gegenüber der Spindel und kann daher für eine energieeffiziente Trocknung von Kolben mit hohem Anfangsfeuchtegehalt empfohlen werden. Weitere Untersuchungen wurden zum Verhalten unterschiedlicher Schüttungen bei der bei Mais üblichen Satztrocknung durchgeführt. Entlieschter und gedroschener Mais führte zu einem vergrößerten Luftwiderstand in der Schüttung und sowohl zu einem höheren Energiebedarf als auch zu ungleichmäßigerer Trocknung, was nur durch einen erhöhten technischen Aufwand etwa durch Mischeinrichtungen oder Luftumkehr behoben werden könnte. Aufgrund des geringeren Aufwandes für die Belüftung und die Kontrolle kann für kleine landwirtschaftliche Praxisbetriebe in Kenia daher insbesondere die Trocknung ganzer Kolben in ungestörten Schüttungen empfohlen werden. Weiterhin wurde in der Arbeit die Entfeuchtung mittels eines Trockenmittels (Silikagel) kombiniert mit einer Heizquelle und abgegrenztem Luftvolumen untersucht und der konventionellen Trocknung gegenüber gestellt. Die Ergebnisse zeigten vergleichbare Entfeuchtungsraten während der ersten 5 Stunden der Trocknung. Der jeweilige Luftzustand bei Verwendung von Silikagel wurde insbesondere durch das eingeschlossene Luftvolumen und die Temperatur beeinflusst. Granulierte Trockenmittel sind bei der Maistrocknung unter hygienischen Gesichtspunkten vorteilhaft und können beispielsweise mit einfachen Öfen regeneriert werden, so dass Qualitätsbeeinträchtigungen wie bei Hochtemperatur- oder auch Freilufttrocknung vermieden werden können. Eine hochwertige Maistrocknungstechnik ist sehr kapitalintensiv. Aus der vorliegenden Arbeit kann aber abgeleitet werden, dass einfache Verbesserungen wie eine sensorgestützte Belüftung von Satztrocknern, der Einsatz von Trockenmitteln und eine angepasste Schüttungshöhe praktikable Lösungen für Kleinbauern in Kenia sein können. Hierzu besteht, ggf. auch zum Aspekt der Verwendung regenerativer Energien, weiterer Forschungsbedarf.

Análisis del sector del food service a partir del modelo de competitividad de Michael Porter para determinar la viabilidad de incursión de la empresa Bakery Service Foods

Las Mipymes son un componente fundamental para el desarrollo económico y social de cualquier país, en especial de un país como Colombia en donde representan el 99,9% de las empresas actualmente constituidas, concentrando el 81% de los empleados a nivel nacional (Fedesarrollo, 2013). Aunque juegan un papel protagónico en la economía colombiana, las Mipymes aún deben recorrer un camino extenso para poder explotar todo el potencial con el que cuentan, puesto que presentan un alto índice de mortandad empresarial en los primeros años de funcionamiento, esto evidenciado en los resultados del estudio GEM (Global Entrepreneurship Monitor, 2009) en donde se encontró que sólo el 12,61% de los negocios lograron superar los 42 meses de permanencia en el mercado (El País, 2010) principalmente a causa de la ausencia de una planeación estratégica de largo plazo que les permita a los negocios emprendedores del país alcanzar la competitividad. Si bien es cierto que crear empresa es relativamente sencillo, son múltiples los retos tanto internos como externos que deben enfrentar las organizaciones para poder alcanzar una etapa de madurez empresarial, sobre todo en los primeros años de funcionamiento que son los más críticos y decisivos para el futuro de cualquier empresa, es por esto que se hace indispensable emplear estrategias que les permitan ser sostenibles a largo plazo, en un entorno altamente competitivo por empresas tanto nacionales como internacionales, siendo este uno de los propósitos fundamentales al que deberían apostar los empresarios colombianos para crear un impacto positivo en la sociedad y aportar a la competitividad nacional. Bakery Service Foods, es una empresa dedicada a la comercialización y distribución de insumos de panadería con sede en el barrio Carvajal en la ciudad de Bogotá. Desde su constitución, el 29 de diciembre de 2008, la empresa ha buscado posicionarse en un mercado en donde tanto empresas grandes como Grasco, Grupo Team, Sigra, Duquesa, Conaceites, Alvarado, Aceites Finos; así como microempresas sin infraestructura ni solidez económica, componen un entorno altamente competitivo y hacinado que representa un desafío para una pequeña empresa familiar que no cuenta con un músculo financiero significativo. Por otra parte, Bakery Service Foods a traviesa por un período de alta incertidumbre debido a que el proveedor que representa el 85% de las ventas de los productos a los cuales representan, FANAGRA S.A, atraviesa por una completa reestructuración debido a la venta de dicha empresa a una multinacional suiza. Esta situación representa un alto riesgo para la compañía y exige que se emprendan acciones oportunas que les permitan reducir la alta dependencia en un único proveedor. Teniendo en cuenta que una de las ambiciones desde la fundación de la compañía ha sido incursionar y ser una empresa competitiva en el mercado de Food Service, que perdure en el tiempo, ¿Qué tan viable es diversificar el portafolio de la empresa Bakery Service Foods (BSF) en el mercado Food Service? Con este proyecto se busca diseñar una propuesta de diversificación de portafolio para la empresa Bakery Service Foods (BSF) analizando el mercado Food Service, por medio del modelo de Ventaja Competitiva de Michael Porter; lo anterior, con el propósito de que la empresa se consolide en este mercado como un aliado estratégico para sus clientes y representados, y con un modelo de negocio sostenible a largo plazo. Finalmente, se espera que a través de la propuesta de mejora para Bakery Service Foods, se afiancen los conocimientos administrativos obtenidos durante el pregrado en Administración de Empresas, aplicando satisfactoriamente las herramientas, metodologías y bases conceptuales adquiridas, para enriquecer el proceso de aprendizaje profesional y aportar valor a una empresa colombiana desde el mercado de Food Service.

Oral food perception and polyphenol-rich foods acceptance - the importance of knowing individuals saliva characteristics for promoting consumption

Polyphenols are widely present in fruits, vegetables, cereals and beverages. Their study gained scientific interest because of their beneficial effects on health. Although there is currently no official dietary recommendation for polyphenol intake, health professionals recommend the consumption of 5-8 daily portions of fruits and vegetables. This is not always achieved and, despite possible causes associated to practical schedule difficulties, the aversive bitter and astringent sensations associated to polyphenols may also lead to avoidance. As such, a better understanding on mechanisms responsible for differences among people, in polyphenol oral perception, is needed for promoting healthier choices. Saliva has been linked to polyphenol consumption. We have previously observed, in animal models, changes in salivary proteome induced by tannin-enriched diets. Moreover, differences in astringency perception were attributed to differences in salivary protein composition. In a recent experiment, we observed differences among individuals with dissimilar tannic-acid perception: people with high sensitivity for the oral sensations elicited by tannins have higher amounts of salivary cystatins and lower capacity to maintain their levels after tannic-acid ingestion. Additionally, and similarly to previous studies, salivary amylase was observed to be involved in tannin perception. In this presentation, oral cavity characteristics influencing the perception of polyphenol-containing foods will be discussed.

Drying of rye (Lolium miltiflorum l.) in fixed bed with parallel air flow.

This work aimed to study the drying of ryegrass seeds (Lolium multiflorum L.) in fixed bed dryer with parallel air flow.

Increasing the Physical Quality of Instant Yogurt by Spray Drying with Instant Additive

This research was carried out to compare the effects of soy lecithin and yolk as instant additive, to know the effects of instant additive level and their interaction on physical quality of instant yogurt (rehydration rate, solubility and viscosity).  The data were analyzed by statistical analysis based on Completely Randomized Block Design (CRBD) with factorial pattern (2x3) using one control treatment (without instant additive), if the result were significant, then continued by Duncan’s New Multiple Range test (DMRT).  The first factor was variety of instant additive (soy lecithin, yolk), whereas the second factor was concentration of instant additive (0.5, 1.0 and 1.5% v/v).  The result of this research showed that variety of instant additive has no significant effect on viscosity, but it has significant effect  (P<0.05) on rehydration rate and solubility.  The second factor has significant effect (P<0.05) on solubility, but has no significantly effect on rehydration rate and viscosity.  Interaction of them only occurred on solubility of instant yogurt.  The result of DMRT showed that the increasing physical quality of instant yogurt occurred on the 0.5% concentration. It was compared with control treatment.  Increasing concentration has no effect on rehydration rate, solubility or viscosity, except on solubility.  The solubility decreased at level of instant additive 1.5%.  The conclusions of this research were soy lecithin and yolk had different ability to increase solubility and rehydration rate but gave similar effect on viscosity.  Application of soy lecithin or yolk as instant additive up to 0.5% would increase physical quality of instant yogurt (rehydration rate, viscosity and solubility).  As compare to soy lecithin, yolk has better performance in increasing and making stable solubility of instant yogurt. (Animal Production 6(1): 1-8 (2004) Key Words:  Instant Yogurt, Soy Lecithin, Yolk, Physical Quality