Efficiently capturing large, complex cultural heritage sites with a handheld mobile 3D laser mapping system

Accurate three-dimensional representations of cultural heritage sites are highly valuable for scientific study, conservation, and educational purposes. In addition to their use for archival purposes, 3D models enable efficient and precise measurement of relevant natural and architectural features. Many cultural heritage sites are large and complex, consisting of multiple structures spatially distributed over tens of thousands of square metres. The process of effectively digitising such geometrically complex locations requires measurements to be acquired from a variety of viewpoints. While several technologies exist for capturing the 3D structure of objects and environments, none are ideally suited to complex, large-scale sites, mainly due to their limited coverage or acquisition efficiency. We explore the use of a recently developed handheld mobile mapping system called Zebedee in cultural heritage applications. The Zebedee system is capable of efficiently mapping an environment in three dimensions by continually acquiring data as an operator holding the device traverses through the site. The system was deployed at the former Peel Island Lazaret, a culturally significant site in Queensland, Australia, consisting of dozens of buildings of various sizes spread across an area of approximately 400 × 250 m. With the Zebedee system, the site was scanned in half a day, and a detailed 3D point cloud model (with over 520 million points) was generated from the 3.6 hours of acquired data in 2.6 hours. We present results demonstrating that Zebedee was able to accurately capture both site context and building detail comparable in accuracy to manual measurement techniques, and at a greatly increased level of efficiency and scope. The scan allowed us to record derelict buildings that previously could not be measured because of the scale and complexity of the site. The resulting 3D model captures both interior and exterior features of buildings, including structure, materials, and the contents of rooms.

Submission: Towards a Stronger and More Efficient IP Rights System : Getting the Balance Right

1. In March 2009, the Australian Government, through IP Australia its administrator of Intellectual Property Rights (IPR) acquired by registration or grant, issued two consultation papers for comment by interested stakeholders. 2. The Consultation Papers have invited written submissions directed towards the object of the paper, namely encouraging discussion on certain proposed changes and their impact on business and innovation. 3. I understand the invitation to make written submissions is predominantly in the areas raised by the Consultation Papers and the questions posed. However, I have made a brief reference to several other areas of concern with the current Australian patent law, which in my opinion inhibit innovation and therefore come under the wider agenda of the government to work toward a stronger and more efficient IP rights system. 4. In this regard, the Consultation Papers indicate that if the IPR are less likely to be invalidated and more likely to be enforced, this confidence will reflect in a greater investment in research leading to innovation. 5. This submission relates to the Balance Paper.

Investigations of dielectric monitoring on an energised transformer oil–paper insulation system

Frequency domain spectroscopy (FDS) is being used to assess the insulation condition of oil–paper power transformers. However, it has to date only been implemented on de-energised transformers, which requires the transformers to be shut down for an extended period and may cause significant costs. To solve this issue, a newly improved monitoring method based on the FDS principle is proposed to implement the dielectric measurement on energised transformers. Moreover, a chirp waveform excitation and its novel processing method are introduced. Compared with the conventional FDS results, dielectric results from the energised insulation system have higher tanδ values because of the increased losses. To further understand the insulation ageing process, the effects of the geometric capacitance are removed from the measured imaginary admittance of the insulation system to enhance the ageing signature. The resulting imaginary admittance is then shown to correlate well with the central time constant in return voltage measurements results. The proposed methods address the issues on techniques used on energised transformers and provide a clue for on-line FDS diagnostic application.

Simulation study for analysis of online dielectric measurement problems on transformer insulation system

Determining the condition as well as the remaining life of an insulation system is essential for the reliable operation of large oil-filled power transformers. Frequency-domain spectroscopy (FDS) is one of the diagnostic techniques used to identify the dielectric status of a transformer. Currently, this technique can only be implemented on a de-energized transformer. This paper presents an initial investigation into a novel online monitoring method based on FDS dielectric measurements for transformers. The proposed technique specifically aims to address the real operational constraints of online testing. This is achieved by designing an online testing model extending the basic “extended Debye” linear dielectric model and taking unique noise issues only experienced during online measurements into account via simulations. Approaches to signal denoising and potential problems expected to be encountered during online measurements will also be discussed. Using fixed-frequency sinusoidal excitation waveforms will result in a long measurement times. The use of alternatives such as a chirp has been investigated using simulations. The results presented in the paper predict that reliable measurements should be possible during online testing.

Protection of intellectual property in Islamic Shari'a and the development of the Libyan intellectual property system

This thesis introduces a theory of intellectual property (IP) law informed by Islamic Shari'a. The sources and objectives of Islamic Shari'a support the theoretical framework underpinning IP laws. However, they strongly emphasise the importance of development goals in intellectual property policy making. This thesis argues that an optimal IP system from an Islamic perspective shall not overprotect IP holders but should instead endeavor to empower people to access knowledge resources to enhance access to education, public health and economic opportunities. Taking Libya as a case study, this thesis makes recommendations for the improvement of IP law that have important broader implications for developing countries.

Preservice practicum supervision : researching an on-line communication system

Practicum is widely recognised as an essential component of preservice professional teacher education. The effective supervision of preservice teachers while undertaking practicum is fundamental to the success of the field experience. However, many of the traditional models of supervision are under pressure. Alternative models for the supervision of preservice teacher practicum are needed to encourage stronger communication links between the university and field placement sites. This paper describes one such model, PracLink, an on-line communication infrastructure used to facilitate and support student learning during practicum. Research findings regarding the use of PracLink are reported, which highlight the strengths and potential of this model while also addressing its shortcomings.

Going through the obstruction, the Torrens System Assurance Fund and contemporary solutions : a tale weaved from a story of a nun, a romantic triangle and sibling corruption

Private title insurance has been the subject of much debate by law reform bodies and academics. This article adds a new dimension to the discussion by analysing its role against a recent scenario where a nun was betrayed by the actions of her brother, and compensation payable from the assurance fund, after much challenge by the registrar, amounted to in excess of $4 million.We ask whether the slow burning of title insurance into the psyche of Australian home purchasers will see state-based assurance fundings looking to minismise their role in the Torrens system. We also query how the rather more immediate electronic establishment of electronic conveyancing will alter the balance between the assurance fund, private title insurance and the increasing responsibilities on stakeholdes involved in conveyancing.

Industry based rehabilitation and closure knowledge management system : scoping study

The Central Queensland Mine Rehabilitation Group (CQMRG) has hosted mine site rehabilitation inspections combined with technical workshops for more than 20 years. It was recognised at CQMRG's anniversary meeting in April 2013 that the vast body of knowledge held by rehabilitation and closure planning practitioners was being lost as senior rehabilitation experts retire from the industry. It was noted that even more knowledge could be readily lost unless a knowledge management platform was developed to capture, store and enable retrieval of this information. This loss of knowledge results in a significant cost to industry. This project was therefore undertaken to review tools which have the capability to gather the less formal knowledge as well as to make links to existing resources and bibliographic material. This scoping study evaluated eight alternative knowledge management systems to provide guidance on the best method of providing the industry with an up-to-date, good practice, knowledge management system for rehabilitation and closure practices, with capability for information sharing via a portal and discussion forum. This project provides guidance for a larger project which will implement the knowledge management system to meet the requirements of the CQMRG and be transferrable to other regions if applicable. It will also provide the opportunity to identify missing links between existing tools and their application. That is, users may not be aware of how these existing tools can be used to assist with mine rehabilitation planning and implementation and the development of a new platform will help to create those linkages. The outcomes of this project are directed toward providing access to a live repository of rehabilitation practice information which is Central Queensland coal mine-specific, namely: highlighting best practice activities, results of trials and innovative practices; updated legislative requirements; links to practices elsewhere; and informal anecdotal information relevant to particular sites which may be of assistance in the development of rehabilitation of new areas. Solutions to the rehabilitation of challenging spoils/soils will also be provided. The project will also develop a process which can be applied more broadly within the mining sector to other regions and other commodities. Providing a platform for uploading information and holding discussion forums which can be managed by a regional practitioner network enables the new system to be kept alive, driven by users and information needs as they evolve over time. Similar internet-based platforms exist and are managed successfully. The preferred knowledge management system will capture the less formal and more difficult to access knowledge from rehabilitation and mine closure practitioners and stakeholders through the CQMRG and other contributors. It will also provide direct links, and greater accessibility, to more formal sources of knowledge with anticipated cost savings to the industry and improved rehabilitation practices with successful transitioning to closure and post-mining land use.

A reputation-enhanced recommender system

Reputation systems are employed to provide users with advice on the quality of items on the Web, based on the aggregated value of user-based ratings. Recommender systems are used online to suggest items to users according to the users, expressed preferences. Yet, recommender systems will endorse an item regardless of its reputation value. In this paper, we report the incorporation of reputation models into recommender systems to enhance the accuracy of recommendations. The proposed method separates the implementation of recommender and reputation systems for generality. Our experiment showed that the proposed method could enhance the accuracy of existing recommender systems.