793 resultados para Filtração por membranas


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Grains and legume seeds are foods that form the basis of the diets of many cultures around the world, winch contritbute to the daily nutrient requirements of humans. Vicilins (7S globulin) are storage proteins found in legume seeds, and may have an additional function constitutive defense of the embryo against pests and pathogens. In this work the vicilin from Anadenanthera macrocarpa - AmV (red-angico), was purified and partially characterized, its effect on development and larval survival and adult emergence of Callosobruchus maculatus was evaluated by determination of LD50, WD50 and ED50 in system bioassay. Purification of vicilin was initiated by the chitin affinity chromatography and then gel filtration (Superdex 75 Tricorn 10x300 mm) FPLC system followed by reverse phase chromatography (C8 phenomenex) on HPLC system. Bioassays WD50 and LD50 for larvae were 0.32% and 0.33% (w:w) respectively, since the ED50 for adults was 0.096%. The probable mechanism of action was evaluated by testing digestibility of AmV in vitro, and observed for the involvement of two fragments vicilins immunoreactive against polyclonal Anti-vicilin from Erythrina velutina (Anti-EvV) about of 22 and 13 kDa chitin binding. The AmV in its native form has been recognized by the anti-EvV, indicating that there is a conserved region in the vicilin and is probably corresponding to the chitin binding domains. These results point to a new vicilin chitin binding that can subsequently be used as a possible biopesticide protein source, in order to control insect pest C. maculatus and confirm literature findings that demonstrate vicilin in the presence of different kinds of ligands to conserved regions chitin not yet characterized

Relevância:

10.00% 10.00%

Publicador:

Resumo:

El bajo peso al nacer definido por la Academia Americana de Pediatría como un peso igual a 2 500 g o menor, independientemente de la edad gestacional, se ha convertido en una entidad en ascenso en países en desarrollo y factor de riesgo para morbi-mortalidad. La proporción de niños con peso bajo al nacer que son prematuros en comparación con los que tuvieron un crecimiento intrauterino anormal, varía en el mundo, en países desarrollados, casi todos los pacientes con bajo peso al nacer son prematuros, mientras que en naciones en desarrollo los principales contribuyentes a la tasa de peso bajo al nacer son niños a término con un crecimiento menor. De etiología multifactorial incluidos factores propios del embarazo como trastornos hipertensivos del embarazo, trastornos metabólicos derivados del embarazo como la diabetes gestacional y los embarazos múltiples; y otros que no están en relación directa pero que siendo patologías crónicas preexistentes comprometen el flujo sanguíneo placentario y pueden restringir así el crecimiento intrauterino. El presente estudio es un estudio descriptivo que persigue como objetivo tener un panorama del perfil epidemiológico que presentan los recién nacidos con bajo peso al nacer, que nacen en el Hospital Especializado de Maternidad “Dr. Raúl Argüello Escolán” se revisó 130 expedientes de recién nacidos con peso al nacer entre 2,000 grs. y 2,499 grs. encontrando que las madres de estos recién nacidos, se encuentran principalmente entre las edades de 14-19 años en el 29% de los recién nacidos, en su primer embarazo en el 56.9%, en cuanto a sus controles prenatales el 99.2% llevo controles prenatales, captadas en el 69% antes de las 20 semanas de gestación y teniendo más del 60% de los casos más de 4 controles prenatales, observando que el 23% de las madres presentan condiciones clínicas preexistentes en el embarazo en las que destacan la hipertensión arterial y los problemas infecciosos en las vías urinarias, en tanto los problemas relacionados al embarazo los trastornos hipertensivos siguen a la cabeza compartiendo lugar con el embarazo múltiple y la ruptura prematura de membranas.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The main objectives of this work are the measurement of terpenes solubility in water at different temperatures, and the formulation of Deep Eutectic Solvents based on choline chloride and polycarboxylic acids, that can be used as hydrotropes of aqueous solutions in terpenes, replacing conventional organic solvents. In this work a new experimental methodology was implemented, using dialysis membranes, for the measurement of terpenes solubility in water. Concerning the deep eutectic diagrams formulation, the determination of the melting points of the eutectic mixtures was performed using a visual method. The method used for determining solubilities was previously validated using a well-studied model compound, toluene. The experimental results of terpenes solubilities in water resulted in a very satisfactory coefficients of variation, always below 6%. The experimental solubility data were analysed and the temperature dependence is also studied in a thermodynamic perspective. The compound with the largest solubility dependence with the temperature is geraniol, while thymol presents the smallest. The phase diagrams of DES formulated were quite satisfactory, presenting always eutectic points below to 373.15 K. For some compositions, the systems composed by choline chloride and lactic, or malonic, or myristic acid were liquid at room temperature. In the case of monocarboxylic acids, eutectic is formed at 60% mol of the acid, to dicarboxylic acid is formed at 50% mol of the acid and for tricarboxylic acid these point is formed at 30% mol of the acid. In the future, it will be important to study the effect of DES as hydrotropes in aqueous solutions of terpenes. Furthermore, it would be interesting to study more terpenes in order to assess the effect of the size of the alkyl chain and the structures of the compounds.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Oil well cementing materials consist of slurries of Special class Portland cement dispersed in water. Admixtures can be used to provide the necessary fluidity, so the material can be efficiently pumped down as well as penetrate porous rocks with controlled filter loss. Construction admixtures can be used to modify the properties of oil well cements provided they can withstand and hold their properties at the higher than ambient temperatures usually encountered in oil fields. In civil construction, superplasticizer play the role of dispersants that reduce the facto r of water cement improve mechanical properties and fluidity of the cement, whereas anti-segregation agents improve the workability of the slurry. In the present study, oil well cement slurries were produced adding both a dispersant and an anti-segregation agent conventionally used in Portland CPII-Z-32 RS cement aiming at materials for primary cementing and squeeze operations. Three basic aspects were evaluated: fluidity, filter loss and the synergetic effect of the admixtures at two temperatures, i.e., 27°C and 56°C, following API RP 10B practical recommendations. The slurries were prepared using admixture concentrations varying from 2.60 Kgf/m3 (0.02 gallft3) to 5.82 Kgf/m3 (0.045 galJft3) BWOC. The density of the slurries was set to 1.89 g/cm3 (15.8 Ib/gal). 0.30 to 0.60% BWOC of a CMC-based anti-segregation agent was added to the cement to control the filter loss. The results showed that the addition of anti-segregation at concentrations above 0.55% by weight of cement resulted in the increased viscosity of the folders in temperatures evaluated. The increasing the temperature of the tests led to a reduction in the performance of anti-segregation. At concentrations of 5.20 kgf/m3 (0,040 gallft3) and 5.82 Kgf/m3 (0,045 gal/ft 3) observed a better performance of the properties evaluated in the proposed system. At low temperature was observed instability in the readings of rheology for all concentrations of anti-segregation. Contents that increasing the concentration of anti¬-segregation is limited concentrations greater than 0.55 % BWOC of the CMC in temperature analyzed. The use of the system with CMC promoted a good performance against the properties evaluated. The principal function of anti¬-segregation was optimized with increasing concentration of superplasticizer, at temperatures above the 2rC. The study of the behaviour of systemic additives, resulting in slurries of cement, which can be optimized face studies of other intrinsic properties in oil fields

Relevância:

10.00% 10.00%

Publicador:

Resumo:

La tuberculosis es un serio problema de salud pública, esta enfermedad representa la segunda causa de muerte ocasionada por un agente infeccioso. Una de las razones de la elevada tasa de morbi-mortalidad es la multifarmacorresistencia desarrollada por la bacteria, dicha resistencia es más frecuente en infecciones que requieren un tratamiento prolongado, lo cual conduce a mayor riesgo de incumplimiento por parte del paciente. Considerando la problemática asociada al tratamiento de la tuberculosis, el desarrollo de un sistema que libere isoniazida de manera sostenida representa una forma para mejorar el cumplimiento de la terapia, permitiendo mantener las concentraciones plasmáticas del fármaco en el rango terapéutico y reducir el riesgo de desarrollo de resistencia por el Mycobacterium tuberculosis. Contribuciones y Conclusiones: En el presente trabajo de investigación se evaluaron las características de liberación de la isoniazida incorporada en una matriz cerámica a base de SiO2 a condiciones fisiológicas in vitro. La síntesis del biomaterial se realizó vía sol-gel a diferentes condiciones de pH y relación TEOS/Agua. El material cerámico conteniendo la isoniazida fue caracterizado mediante técnicas térmicas, espectrométricas y microscópicas. Se realizaron pruebas de extracción para determinar la incorporación de isoniazida en el biomaterial, así como ensayos in vitro para evaluar las características de liberación de isoniazida en solución acuosa a pH fisiológico y mediante la determinación de permeabilidad en membranas artificiales. La cinética de liberación a pH fisiológico ocurrió en dos fases y esta dependió directamente de la morfología y de las propiedades texturales de la matriz, el factor más importante fue la porosidad, mientras que el estudio de permeabilidad de isoniazida en membranas artificiales indica que no se ve afectada cuando esta se incorporó en los biomateriales.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Exatas Departamento de Matemática, 2016.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Introducción: A mediados de los años 70’s del siglo pasado el descubrimiento de la tecnología del ADN recombinante marca el inicio de la era de la biotecnología moderna. La implementación de estas tecnologías permitió la utilización de organismos como sistemas de expresión que a lo largo de los años ha generado la producción de una gran variedad de productos biológicos. Dentro de estos sistemas Pichia pastoris es un sistema de expresión ampliamente utilizado debido a sus características tales como la producción de proteínas en grandes cantidades, la liberación de los productos al medio de cultivo, la obtención de productos complejos que requieren modificaciones postraduccionales típicas de los eucariotas o que contienen puentes disulfuro, entre otras. Nocardia brasiliensis es una bacteria parcialmente ácido-alcohol resistente la cual forma colonias granulares, con hifas aéreas escasas, sus colonias exhiben un color anaranjado pardo con bordes en blanco. N. brasiliensis es patógena para el ser humano y es el agente causal del actinomicetoma. El actinomicetoma es una enfermedad crónica generalmente localizada en las extremidades. Se caracteriza por ser un proceso lento de tumefacción con nódulos, abscesos y fístulas.La Superóxido Dismutasa (SOD) es una enzima reductora polimérica que cataliza la conversión del ión superóxido a peróxido de hidrógeno y oxígeno molecular. La SOD ha sido propuesta como un factor de virulencia de microorganismos patógenos, cuya acción consiste en bloquear los efectores oxidativos del estallido respiratorio iniciado por los fagocítos en el fagolisosoma. Este mecanismo ha sido descrito para bacterias de los géneros Mycobacterium, Rhodococcus y Nocardia. Objetivo: producir y caracterizar la Superóxido Dismutasa A (SODA) de Nocardia brasiliensis en Pichia pastoris. Metodología: se realizó el diseño de primers adicionando secuencias de sitios de corte para las enzimas XhoI y AvrII, así como una cola de histidinas en el extremo 5’ para la amplificación del gen sodA de N. brasiliensis a partir del ADN genómico de Nocardia brasiliensis. El amplicón se clonó en el vector de expresión pPIC9. Se llevó a cabo la transformación por electroporación de levaduras Pichia pastoris GS115. La producción de SOD se llevó a cabo en inducciones de 96 h con metanol como agente inductor. Los sobrenadantes se dializaron con membranas de celulosa. Los dializados se observaron por SDS-PAGE y western blot. Se analizó la actividad funcional de la enzima con el SOD Assay kit de Sigma Aldrich. Resultados: Por reacción en cadena de la polimerasa se obtuvo una secuencia de 625 pb correspondiente al gen sodA. El fragmento se ligó al vector de expresión pPIC9 y fue caracterizado con las enzimas de restricción XhoI y AvrII. Las cepas trasformadas de P. pastoris GS115 se caracterizaron con el gen aox1 obteniendo cepas Mut+ y Muts. Los análisis por SDSPAGE mostraron bandas no observadas en el control negativo de expresión mientras en los western blot solo una de las clonas mostró señal. Los análisis de actividad funcional sugieren inhibición de la reacción enzimática infiriendo presencia de la proteína SOD en el medio dializado. Conclusiones: Se logró la construcción del sistema de expresión Pichia pastoris con el casete de expresión de la SOD de N. brasiliensis. Así como la generación de cepas Mut+y Muts. En los ensayos de actividad funcional se observó inhibición de la reacción enzimática.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The effluents released by the textile industry have high concentrations of alkali, carbohydrates, proteins, in addition to colors containing heavy metals. Therefore, a filter was prepared aiming primarily to the removal of color. In order to prepare this filter, rice hulls and diatomite were used, which have in their structure, basically amorphous hydrated silica. The silica exists in three crystalline forms: quartz, tridymite and cristobalite. In accordance with the above considerations, this study was divided into two stages; the first corresponds to the preparation of the filter and the second to carry out the tests in the effluent/filter in order to verify the efficiency of the color removal. First, the raw material was subjected to a chemical analysis and XRD, and then the diatomite was mixed, via humid, with a planetarium windmill with 20 %, 40 %, 60 % and 80 % of rice husk ash. To the mixture, 5 % carboxymethylcellulose (CMC) was added as a binder at room temperature. The samples were uniaxially compacted into metallic matrix of 0.3 x 0.1 cm² of area at a pressure of 167 MPa by means of hydraulic press and then sintered at temperatures of 1,000 °C, 1,200 °C and 1,400 °C for 1 h and submitted to granulometry test using laser, linear retraction, water absorption, apparent porosity and resistance to bending, DTA, TMA and XRD. To examine the pore structure of the samples scanning electron microscope (SEM) was used. Also tests were carried out in a mercury porosimeter to verify the average size of the pores and real density of the samples. In the second stage, samples of the effluent were collected from a local industry, whose name will be preserved, located in Igapó, in the State of Rio Grande do Norte - RN. The effluent was first pretreated before filtration and then subjected to a treatment of flotation. The effluent was then characterized before and after filtration, with parameters of color, turbidity, suspended solids, pH, chemical and biochemical oxygen demand (COD and BOD). Thus, through the XRD analysis the formation of cristobalite α in all samples was observed. The best average size of pore was found to be 1.75 μm with 61.04 % apparent porosity, thus obtaining an average 97.9 % color removal and 99.8 % removal of suspended solid

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pastas a base de cimento Portland são utilizadas na cimentação de poços de petróleo. Elas consistem de uma mistura de partículas sólidas de cimento dispersas em água e aditivos. Atualmente, diversos materiais alternativos são utilizados como aditivos, objetivando a modificação e a melhoria das propriedades das pastas de cimento, especialmente no aumento da fluidez. Novos aditivos plastificantes são capazes de suportar as diversas condições de poços, promovendo propriedades no estado fluido compatíveis às condições exigidas para cimentação.Dispersantes são os componentes da pasta que garantem fluidez, além de proporcionar controle na água perdida por filtração na formação porosa, garantindo o sucesso da operação de bombeio. Em deter minados campos, além do efeito da profundidade, as condições geológicas das formações promovemvariações do gradiente de pressão e temperatura ao longo da profundidade vertical do poço. Recentemente, diversos aditivos químicos da indústria da construção civil tem sido estudados em condições de cimentação de poços de petróleo. Vários produtos testados tem apresentado desempenho superior aos produtos normalmente empregados pela indústria de petróleo com boa relação custo/benefício em função do volume de mercado da construção civil. Resultados promissores na seleção de aditivos com função dispersante da construção civil para operações de cimentação de poços de petróleo onshore foram obtidos para temperaturas até 80°C. O potencial de uso desses aditivos permite estabelecer novas soluções para problemas encontrados na cimentação de poços de petróleo HPHT, poços sujeitos à injeção de vapor, poços depletados e poços produtores de gás. Na construção civil, os superplastificantes permitem reduzir o fator água/cimento das argamassas proporcionando melhoria de propriedades como resistência mecânica e fluidez. Assim, o objetivo deste trabalho foi o estudo e a caracterização reológica de pastas constituídas de cimento Portland, água e aditivos do tipo plastificante, com função dispersante a base de naftaleno condensado e policarboxilato, na faixa de temperaturas de 58°C e 70ºC. As condições utilizadas para a avaliação dos aditivos alternativos foram baseadas em uma cimentação primária para um poço hipotético de 2200 m de profundidade e gradientes geotérmicos de 1,7°F/100 pés e 2,1°F/100 pés. Os resultados demonstraram a grande eficiência e o poder dispersivo do policarboxilato para as temperaturas estudadas. O aditivo promoveu alta fluidez, sem efeitos de sedimentação da pasta. O dispersante à base de naftaleno reduziutant o a viscosidade plástica como o limite de escoamento acimada concentração a partir de 0,13%. O modelo de Bingham descreveu bem o comportamento reológico das pastas com policarboxilato para todas as concentrações

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Dissertação de Mestrado, Engenharia Biológica, Faculdade de Ciências e Tecnologias, Universidade do Algarve, 2014

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Dissertação de Mestrado, Engenharia Biológica, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Dissertação de Mestrado, Aquacultura e Pescas, Especialização em Aquacultura, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Chemical admixtures, when properly selected and quantified, play an important role in obtaining adequate slurry systems for quality primary cementing operations. They assure the proper operation of a well and reduce costs attributed to corrective cementing jobs. Controlling the amount lost by filtering through the slurry to permeable areas is one of the most important requirements in an operation, commonly controlled by chemical admixtures, such as carboxymethylcellulose (CMC). However, problems related to temperature, salttolerance and the secundary retarding effect are commonly reported in the literature. According to the scenario described above, the use of an aqueous dispersion of non-ionic poliurethane was proposed to control the filter loss, given its low ionic interaction with the free ions present in the slurries in humid state. Therefore, this study aims at assessing the efficiency of poliurethane to reduce filter loss in different temperature and pressure conditions as well as the synergistic effect with other admixtures. The temperatures and pressures used in laboratory tests simulate the same conditions of oil wells with depths of 500 to 1200 m. The poliurethane showed resistance to thermal degradation and stability in the presence of salts. With the increase in the concentration of the polymer there was a considerable decrease in the volume lost by filtration, and this has been effective even with the increase in temperature