Digital dietetics : practices and attitudes to technology use among Australian dietitians

Recent advancements in the capabilities of information and communication technologies (ICT) offer unique avenues to support the delivery of nutrition care. Despite ICTs being widely available, evidence on the practices and attitudes with regard to ICT use among dietitians is limited. A cross-sectional survey of Dietitians Association of Australia members was administered online in August 2011. All dietitians who responded (n=87) had access to a computer at work. Half reported providing non face-to-face consultations, with the telephone and email the most common modes of delivery. The use of smart phones was prevalent for 49% of practitioners, with 30% recommending nutrition-related applications and/or programs to clients. Benefits to technology use in practice most commonly reported included improvements in access to information/resources, time management, and workflow efficiency. Barriers identified related to cost and access to technology, and lack of suitable programs/applications. Technology was viewed as an important tool in practice among 93% of dietitians surveyed, however only 38% were satisfied with their current level of use. The majority (81%) believed more technology should be integrated within dietetics, while 85% indicated that the development of suitable and practical applications andprograms is necessary for future practice. Technology is regarded as an important tool by Australian dietitians, with an expressed need for theirinclusion to further facilitate nutrition care. Regular and ongoing evaluation of technology use among dietitians is vital to ensure thatapplications and use are evidence based and relevant to consumers in the digital world.

Is mental health education really needed?

Dietitians play a key role in supporting and advocating for the physical health care of mental health (MH) consumers, with 68-80% seeing clients with associated depression issues in Australia. The DAA Mental Health Curricula Project found dietetic training in MH was inadequate and recommended increased MH education. A MH resource package was developed and sent to universities in 2010 for incorporation into teaching. The aim of this study was to assess dietetic students’ baseline MH knowledge, attitudes and exposure prior to dietetics coursework and package implementation. An online survey measured dietetic students’ mental health knowledge (MHK), attitudes towards mental illness (MHA) and previous exposure to mental illness. MHK was assessed by sixteen dietetics-specific questions. MHA were measured by Day’s Mental Illness Stigma Scale. Exposure was assessed using an adapted version of Eack’s Social Work Students’ Experiences with Schizophrenia questions. Fifty-nine dietetic students (30% response rate) from two universities were surveyed at the beginning of dietetic coursework. Survey responses revealed students had low MHK (mean 5.48, scale 0-16) with no significant difference between cohorts (p=0.67). Half of respondents (n=31) recorded never or rarely being in contact with people with mental illness. 82% of respondents (n=48) reported having no or little experience with mental illness. Data suggests low levels of sitgmatising attitudes about people with mental illness. Given the high prevalence of clients with MH issues in everyday dietetic practice, this study is a first step in addressing integration of MH education into dietetics training.

Is there a place for pixels in our practice? Dietitians' attitudes towards the use of photographic dietary records within the nutrition care process

Photographic records of dietary intake (PhDRs) are an innovative method for the dietary assessment and may alleviate the burden of recording intake compared to traditional methods of recording intake. While the performance of PhDRs has been evaluated, no investigation into the application of this method had occurre within dietetic practice. This study examined the attitudes of dietitians towards the use of PhDRs in the provision of nutrition care. A web-based survey on the practices and beliefs with regards to technology use among Dietitians Association of Australia members was conducted in August 2011. Of the 87 dietitians who responded, 86% assessed the intakes of clients as part of individualised medical nutrition therapy, with the diet history the most common method used. The majority (91%) of dietitians surveyed believed that a PhDR would be of use in their current practice to estimate intake. Information contained in the PhDR would primarily be used to obtain a qualitative evaluation of diet (84%) or to supplement an existing assessment method (69%), as opposed to deriving an absolute measure of nutrient intake (31%). Most (87%) indicated that a PhDR would also be beneficial in both the delivery of the intervention and to evaluate and monitor goals and outcomes, while only 46% felt that a PhDR would assist in determining the nutrition diagnosis. This survey highlights the potential for the use of PhDRs within practice. Future endeavours lie in establishing resources which support the inclusion of PhDRs within the nutrition care process.

Benefits of using modern cementing techniques in the acetabulum : the rim cutter

Purpose. To compare radiological records of 90 consecutive patients who underwent cemented total hip arthroplasty (THA) with or without use of the Rim Cutter to prepare the acetabulum. Methods. The acetabulum of 45 patients was prepared using the Rim Cutter, whereas the device was not used in the other 45 patients. Postoperative radiographs were evaluated using a digital templating system to measure (1) the positions of the operated hips with respect to the normal, contralateral hips (the centre of rotation of the socket, the height of the centre of rotation from the teardrop, and lateralisation of the centre of rotation from the teardrop) and (2) the uniformity and width of the cement mantle in the 3 DeLee Charnley acetabular zones, and the number of radiolucencies in these zones. Results. The study group showed improved radiological parameters and were closer to the anatomic centre of rotation both vertically (1.5 vs. 3.7 mm, p<0.001) and horizontally (1.8 vs. 4.4 mm, p<0.001) and had consistently thicker and more uniform cement mantles (p<0.001). There were 2 radiolucent lines in the control group but none in the study group. Conclusion. The Rim Cutter resulted in more accurate placement of the centre of rotation of a cemented prosthetic socket, and produced a thicker, more congruent cement mantle with fewer radiolucent lines.

From tiers to tables – enhancing student experience through collaborative learning spaces

BACKGROUND Collaborative and active learning have been clearly identified as ways students can engage in learning with each other and the academic staff. Traditional tier based lecture theatres and the didactic style they engender are not popular with students today as evidenced by the low attendance rates for lectures. Many universities are installing spaces designed with tables for group interaction with evolutions on spaces such as the TEAL (Technology Enabled Active Learning) (Massachusetts Institute of Technology, n.d.) and SCALE-UP (Student-Centred Activities for Large-Enrolment Undergraduate Programs) (North Carolina State University, n.d.) models. Technology advances in large screen computers and applications have also aided the move to these collaborative spaces. How well have universities structured learning using these spaces and how have students engaged with the content, technology, space and each other? This paper investigates the application of collaborative learning in such spaces for a cohort of 800+ first year engineers in the context of learning about and developing professional skills representative of engineering practice. PURPOSE To determine whether moving from tiers to tables enhances the student experience. Does utilising technology rich, activity based, collaborative learning spaces lead to positive experiences and active engagement of first year undergraduate engineering students? In developing learning methodology and approach in new learning spaces, what needs to change from a more traditional lecture and tutorial configuration? DESIGN/METHOD A post delivery review and analysis of outcomes was undertaken to determine how well students and tutors engaged with learning in new collaborative learning spaces. Data was gathered via focus group and survey of tutors, students survey and attendance observations. The authors considered the unit delivery approach along with observed and surveyed outcomes then conducted further review to produce the reported results. RESULTS Results indicate high participation in the collaborative sessions while the accompanying lectures were poorly attended. Students reported a high degree of satisfaction with the learning experience; however more investigation is required to determine the degree of improvement in retained learning outcomes. Survey feedback from tutors found that students engaged well in the activities during tutorials and there was an observed improvement in the quality of professional practice modelled by students during sessions. Student feedback confirmed the positive experiences in these collaborative learning spaces with 30% improvement in satisfaction ratings from previous years. CONCLUSIONS It is concluded that the right mix of space, technology and appropriate activities does engage students, improve participation and create a rich experience to facilitate potential for improved learning outcomes. The new Collaborative Teaching Spaces, together with integrated technology and tailored activities, has transformed the delivery of this unit and improved student satisfaction in tutorials significantly.

Intraurban rail access : Policy implications of five revealed perspectives from a Q-sorting exercise in three Australian cities

This project advances current understanding of intra-urban rail passengers and their travel experiences in order to help rail industry leaders tailor policy approaches to fit specific, relevant segments of their target population. Using a Q sorting technique and cluster analysis, our preliminary research identified five perspectives occurring in a small sample of rail passengers, who varied in their frequency and location of rail travel as well as certain socio-demographic characteristics. Revealed perspectives (named to capture the gist of their content) included: ‘Rail Travel is About the Destination, Not the Journey’; ‘Despite Challenges, Public Transport is Still the Best Option’; ‘Rail Travel is Fine’; ‘Rail Travel? So Far, So Good’; and ‘Bad Taste for Rail Travel’. This paper discusses each of the perspectives in detail, and considers them in terms of tailored policy implications. An overarching finding from this study is that improving railway travel ‘access’ requires attention to physical, psychological, financial, and social facets of accessibility. For example, designing waiting areas to be more socially functional and comfortable has the potential to increase ridership by addressing social forms of access, decreasing perceived wait times, and making time at the station feel like time well spent. Even at this preliminary stage, the Q sorting technique promises to provide a valuable, holistic albeit fine-grained analysis of passenger attitudes and experiences that will assist industry efforts to increase ridership.

High load transit line passenger transmission and productiveness efficiencies

Performance of urban transit systems may be quantified and assessed using transit capacity and productive capacity in planning, design and operational management activities. Bunker (4) defines important productive performance measures of an individual transit service and transit line, which are extended in this paper to quantify efficiency and operating fashion of transit services and lines. Comparison of a hypothetical bus line’s operation during a morning peak hour and daytime hour demonstrates the usefulness of productiveness efficiency and passenger transmission efficiency, passenger churn and average proportion line length traveled to the operator in understanding their services’ and lines’ productive performance, operating characteristics, and quality of service. Productiveness efficiency can flag potential pass-up activity under high load conditions, as well as ineffective resource deployment. Proportion line length traveled can directly measure operating fashion. These measures can be used to compare between lines/routes and, within a given line, various operating scenarios and time horizons to target improvements. The next research stage is investigating within-line variation using smart card passenger data and field observation of pass-ups. Insights will be used to further develop practical guidance to operators.

High load transit line passenger transmission and productiveness efficiencies

Performance of urban transit systems may be quantified and assessed using transit capacity and productive capacity in planning, design and operational management activities. Bunker (4) defines important productive performance measures of an individual transit service and transit line, which are extended in this paper to quantify efficiency and operating fashion of transit services and lines. Comparison of a hypothetical bus line’s operation during a morning peak hour and daytime hour demonstrates the usefulness of productiveness efficiency and passenger transmission efficiency, passenger churn and average proportion line length traveled to the operator in understanding their services’ and lines’ productive performance, operating characteristics, and quality of service. Productiveness efficiency can flag potential pass-up activity under high load conditions, as well as ineffective resource deployment. Proportion line length traveled can directly measure operating fashion. These measures can be used to compare between lines/routes and, within a given line, various operating scenarios and time horizons to target improvements. The next research stage is investigating within-line variation using smart card passenger data and field observation of pass-ups. Insights will be used to further develop practical guidance to operators.

Planning for transit system reliability using productive performance and risk assessment

Urban transit system performance may be quantified and assessed using transit capacity and productive capacity for planning, design and operational management. Bunker (4) defines important productive performance measures of an individual transit service and transit line. Transit work (p-km) captures transit task performed over distance. Transit productiveness (p-km/h) captures transit work performed over time. This paper applies productive performance with risk assessment to quantify transit system reliability. Theory is developed to monetize transit segment reliability risk on the basis of demonstration Annual Reliability Event rates by transit facility type, segment productiveness, and unit-event severity. A comparative example of peak hour performance of a transit sub-system containing bus-on-street, busway, and rail components in Brisbane, Australia demonstrates through practical application the importance of valuing reliability. Comparison reveals the highest risk segments to be long, highly productive on street bus segments followed by busway (BRT) segments and then rail segments. A transit reliability risk reduction treatment example demonstrates that benefits can be significant and should be incorporated into project evaluation in addition to those of regular travel time savings, reduced emissions and safety improvements. Reliability can be used to identify high risk components of the transit system and draw comparisons between modes both in planning and operations settings, and value improvement scenarios in a project evaluation setting. The methodology can also be applied to inform daily transit system operational management.

Planning for transit system reliability using productive performance and risk assessment

Urban transit system performance may be quantified and assessed using transit capacity and productive capacity for planning, design and operational management. Bunker (4) defines important productive performance measures of an individual transit service and transit line. Transit work (p-km) captures transit task performed over distance. Transit productiveness (p-km/h) captures transit work performed over time. This paper applies productive performance with risk assessment to quantify transit system reliability. Theory is developed to monetize transit segment reliability risk on the basis of demonstration Annual Reliability Event rates by transit facility type, segment productiveness, and unit-event severity. A comparative example of peak hour performance of a transit sub-system containing bus-on-street, busway, and rail components in Brisbane, Australia demonstrates through practical application the importance of valuing reliability. Comparison reveals the highest risk segments to be long, highly productive on street bus segments followed by busway (BRT) segments and then rail segments. A transit reliability risk reduction treatment example demonstrates that benefits can be significant and should be incorporated into project evaluation in addition to those of regular travel time savings, reduced emissions and safety improvements. Reliability can be used to identify high risk components of the transit system and draw comparisons between modes both in planning and operations settings, and value improvement scenarios in a project evaluation setting. The methodology can also be applied to inform daily transit system operational management.

'These are my photos of when I was little' : Locating Media Arts in the Primary School Curriculum

‘Media Arts’ has been included as a fifth area of the Arts for the Australian Curriculum which will become mandatory learning for all Australian children from pre-school to Year Six (Y6) from 2014. The current curriculum design is underpinned by an approach familiar to media educators who combine creative practice and critical response to develop students’ media literacies. Media Arts within the Australian Curriculum will place Australia at the forefront of international efforts to promote media education as an entitlement for all children. Even with this mandated endorsement, however, there remains ongoing debate about where to locate media education in school curricula. Historically, media education in Australia has been approached through diverse curriculum activities at the secondary school level. These include subject English’s critical literacy objectives; vocationally oriented media and technology education or ICTs education; and Arts courses using new media technologies for creativity. In this chapter we consider the possibilities and challenges for Media Arts, specifically for primary school student learning. We draw on empirical evidence from a research project that has trialled a Media Arts curriculum with students attending a primary school in a low socio-economic status and culturally diverse community on the outskirts of Brisbane, Queensland.

Screening and managing cannabis use: comparing GP's and nurses' knowledge, beliefs, and behavior

Background: General practitioners (GPs) and nurses are ideally placed to address the significant unmet demand for the treatment of cannabis-related problems given the numbers of people who regularly seek their care. The aim of this study was to evaluate differences between GPs and nurses’ perceived knowledge, beliefs, and behaviors toward cannabis use and its screening and management. Methods: This study involved 161 nurses and 503 GPs who completed a survey distributed via conference satchels to delegates of Healthed seminars focused on topics relevant to women and children’s health. Differences between GPs and nurses were analyzed using χ2- tests and two-sample t-tests, while logistic regression examined predictors of service provision. Results: GPs were more likely than nurses to have engaged in cannabis-related service provision, but also more frequently reported barriers related to time, interest, and having more important issues to address. Nurses reported less knowledge, skills, and role legitimacy. Perceived screening skills predicted screening and referral to alcohol and other drug (AOD) services, while knowing a regular user increased the likelihood of referrals only. Conclusions: Approaches to increase cannabis-related screening and intervention may be improved by involving nurses, and by leveraging the relationship between nurses and doctors, in primary care.

Selective cleavage of human sex hormone-binding globulin by kallikrein-related peptidases and effects on androgen action in LNCaP prostate cancer cells

Stimulation of the androgen receptor via bioavailable androgens, including testosterone and testosterone metabolites, is a key driver of prostate development and the early stages of prostate cancer. Androgens are hydrophobic and as such require carrier proteins, including sex hormone-binding globulin (SHBG), to enable efficient distribution from sites of biosynthesis to target tissues. The similarly hydrophobic corticosteroids also require a carrier protein whose affinity for steroid is modulated by proteolysis. However, proteolytic mechanisms regulating the SHBG/androgen complex have not been reported. Here, we show that the cancer-associated serine proteases, kallikrein-related peptidase (KLK)4 and KLK14, bind strongly to SHBG in glutathione S-transferase interaction analyses. Further, we demonstrate that active KLK4 and KLK14 cleave human SHBG at unique sites and in an androgen-dependent manner. KLK4 separated androgen-free SHBG into its two laminin G-like (LG) domains that were subsequently proteolytically stable even after prolonged digestion, whereas a catalytically equivalent amount of KLK14 reduced SHBG to small peptide fragments over the same period. Conversely, proteolysis of 5α-dihydrotestosterone (DHT)-bound SHBG was similar for both KLKs and left the steroid binding LG4 domain intact. Characterization of this proteolysis fragment by [(3)H]-labeled DHT binding assays revealed that it retained identical affinity for androgen compared with full-length SHBG (dissociation constant = 1.92 nM). Consistent with this, both full-length SHBG and SHBG-LG4 significantly increased DHT-mediated transcriptional activity of the androgen receptor compared with DHT delivered without carrier protein. Collectively, these data provide the first evidence that SHBG is a target for proteolysis and demonstrate that a stable fragment derived from proteolysis of steroid-bound SHBG retains binding function in vitro.

A meta-analysis of genome-wide association studies to identify prostate cancer susceptibility loci associated with aggressive and non-aggressive disease

Genome-wide association studies (GWAS) have identified multiple common genetic variants associated with an increased risk of prostate cancer (PrCa), but these explain less than one-third of the heritability. To identify further susceptibility alleles, we conducted a meta-analysis of four GWAS including 5953 cases of aggressive PrCa and 11 463 controls (men without PrCa). We computed association tests for approximately 2.6 million SNPs and followed up the most significant SNPs by genotyping 49 121 samples in 29 studies through the international PRACTICAL and BPC3 consortia. We not only confirmed the association of a PrCa susceptibility locus, rs11672691 on chromosome 19, but also showed an association with aggressive PrCa [odds ratio = 1.12 (95% confidence interval 1.03-1.21), P = 1.4 × 10(-8)]. This report describes a genetic variant which is associated with aggressive PrCa, which is a type of PrCa associated with a poorer prognosis.