Reação de polimerização em cadeia

Apresenta a técnica da Reação de Polimerização em Cadeia (PCR), método de rotina para isolar rapidamente sequências específicas a partir de uma mistura complexa de sequências genômicas ou de cDNAs, com sua evolução desde a primeira apresentação em um encontro científico até a metodologia atual. Lista os sete componentes básicos para o PCR e as três fases que ocorrem no termociclador, desnaturação do DNA, anelamento do primer e extensão da coenzima. Por meio de uma animação, indica o que ocorre com o DNA dentro do termociclador, até o trigésimo ciclo, com a formação de aproximadamente 1 bilhão da sequência alvo desejada. Em um laboratório, realiza toda a metodologia e análise do PCR e ensina como visualizar o DNA usando a técnica de eletroforese em gel e corantes, analisando o resultado e indicando a aplicação do PCR no setor sucroalcooleiro.

Estudo da qualidade do ar interior em infantários da Região Autónoma da Madeira

Presentemente as pessoas passam cerca de 90% da sua vida no interior de edifícios, onde a poluição atinge níveis superiores aos registados no exterior. Os infantários são espaços onde a qualidade do ar interior (QAI) deverá ser alvo de maior preocupação, visto ser o local onde as crianças passam uma fase importante do seu desenvolvimento físico-motor. São vários os poluentes que podem comprometer a saúde humana, de entre os quais se destacam os poluentes biológicos, os químicos, e os físico-químicos. O presente trabalho teve como objectivo analisar a QAI em onze infantários da Ilha da Madeira durante as quatro estações do ano. Para o estudo foi levado em consideração a dispersão geográfica e a envolvente rural e urbana. Complementarmente, foi efectuado um estudo aprofundado dos compostos orgânicos voláteis (COVs) em dois dos infantários, com o emprego de amostragem activa e passiva. Nos infantários em análise, verificou-se a existência de um sério problema de renovação do ar no interior das salas, reflectido nas elevadas concentrações de CO2 e bactérias encontradas durante a monitorização dos espaços. As concentrações de fungos raramente excederam o valor máximo de referência (VMR), sendo o Penicillium spp. e o Cladosporium sp., as espécies mais comuns encontradas. Contudo foram detectadas algumas espécies consideradas perigosas para a saúde humana, como o Aspergillus niger e o A. versicolor. Relativamente aos restantes parâmetros (CO, O3, HCHO, NO2, NO, SO2, H2S, PM10, T e HR), na sua generalidade apresentaram concentrações inferiores aos respectivos VMR: excepção para o HCHO que em 40% das análises revelou valores acima do seu VMR, bem como a T e HR, que apresentaram valores fora das respectivas escalas de referência. Não foram encontradas diferenças significativas na QAI entre os onze infantários no que diz respeito à sua localização geográfica e envolvente. No entanto, em alguns parâmetros foram observadas variações sazonais. O estudo dos perfis de COVs revelou que o tipo de amostragem a empregar deve ter em consideração o objectivo da recolha: se for necessária a obtenção de dados como um flash instantâneo, a utilização da amostragem activa é aconselhada, se forem requeridos dados médios de um determinado período de tempo, o emprego da amostragem passiva será a melhor escolha.

Detecção e caracterização de biomarcadores voláteis em indivíduos com patologias oncológicas

Com a realização deste trabalho, pretendeu-se traçar o perfil padrão da composição volátil típico de fluidos biológicos (urina) de indivíduos sem patologia oncológica (grupo de controlo) comparando-os com os de pacientes (grupo com patologia oncológica). As amostras de urina de ambos os grupos foram analisadas por microextracção em fase sólida em modo de headspace acoplada à espectrometria de massa (HS-SPME-GC/qMS). Com o intuito de aumentar a eficiência de extracção da SPME, foram optimizados alguns parâmetros com influência no processo extractivo, nomeadamente o tipo de fibra, o tempo e a temperatura de extracção. Assim sendo, foram testadas e comparadas seis fibras comercialmente disponíveis, polidimetilsiloxano (PDMS, 100 m), poliacrilato (PA, 85 m), carboxeno-polidimetilsiloxano (CAR/PDMS, 75 m), carbowax-divinilbenzeno (CW/DVB, 65 m), divinilbenzeno-carboxen-polidimetilsiloxano (DVB/CAR/PDMS, 50/30 m) e polidimetilsiloxano-divinilbenzeno (PDMS/DVB, 65 m). A influência do tempo (30, 45, 60 e 75 min) e temperatura (30, 50 e 60 ºC) de extracção foram optimizados de modo a obter uma melhor eficiência de extracção dos compostos voláteis presentes nas amostras de urina. Os melhores resultados foram obtidos usando a fibra carboxeno-polidimetilsiloxano (CAR/PDMS, 75 m), com uma velocidade de agitação de 800 rpm durante 75 min a uma temperatura de 50 ºC. Para os dois grupos em estudo, foram identificados 80 compostos voláteis pertencentes a diversas famílias químicas, nomeadamente, aldeídos, cetonas, derivados benzénicos, compostos terpénicos, ácidos orgânicos, compostos furânicos, compostos sulfurados, fenóis voláteis, ésteres, álcoois superiores e derivados do naftaleno. Os compostos maioritários pertencentes aos grupos analisados foram a 4-heptanona, a 2-pentanona, a acetona, a 2-butanona, o 1(2- furanil)etanona, o 3-metil-3-fenil-2-propenal, o 3,4-dimetilbenzaldeído, o decanal, o dissulfureto de dimetilo, o metanotiol, o 2-metoxitiofeno, o 4-metil-fenol, o p-tert-butil-fenol, o 2,4-bis(1,1- dimetiletil)fenol, o fenol, o m-cimeno, o p-cimeno, o tolueno, o 1-etil-3,5-diisopropilbenzeno, o 2,6-dimetil-7-octen-2-ol, a D-carvona, o vitispirano I e o vitispirano II. O teste One-Way ANOVA foi aplicado aos resultados com o intuito de verificar se existiam diferenças significativas entre os grupos avaliados (Controlo e Oncológico), sendo o dissulfureto de dimetilo, o 2-metoxitiofeno, e o p-cimeno estatisticamente significativos. A aplicação da análise multivariável às amostras de urina das diferentes patologias permitiu diferenciá-las no qual se obteve 81,02% da variância total.A aplicação da análise multivariável às amostras de urina das diferentes patologias permitiu diferenciá-las no qual se obteve 81,02% da variância total. A patologia de Hodgkin é influenciada pelas variáveis heptanal e o 2-metil-3-fenil-2-propenal. O Controlo é afectado essencialmente pelas variáveis p-cimeno, 1,4,5-trimetilnaftaleno e o dissulfureto de dimetilo. O Cólon é influenciado pelo 4-metilfenol, anisole e 1,2-dihidro-1,1,6-trimetil-naftaleno. O 1-octanol e a 3-heptanona influenciam, essencialmente as patologias da Mama e Leucemia.

Estabelecimento do perfil metabolómico volátil da urina e saliva, como estratégia não-invasiva, para a deteção de potenciais biomarcadores de diferentes tipos de cancro

Com este trabalho pretendeu-se estabelecer o perfil metabolómico volátil de amostras de fluidos biológicos, nomeadamente saliva e urina, de pacientes com cancro da mama e do pulmão e de indivíduos saudáveis (grupo controlo), utilizando a Microextração em Fase Sólida em modo headspace (HS-SPME) seguida de Cromatografia Gasosa acoplada à Espectrometria de Massa (GC-MS). Efetuou-se a comparação entre os perfis voláteis dos grupos estudados com o objetivo de identificar metabolitos que possam ser considerados como potenciais biomarcadores dos tipos de cancro em estudo. De modo a otimizar a metodologia extrativa, HS-SPME, foram avaliados os diferentes parâmetros experimentais com influência no processo extrativo. Os melhores resultados foram obtidos com a fibra CAR/PDMS, usando um volume de 2 mL de saliva acidificada, 10% NaCl (m/v) e 45 minutos de extração a uma temperatura de 37±1°C. Para a urina foi utilizada a mesma fibra, 4 mL de urina acidificada, 20% NaCl (m/v) e 60 minutos de extração a 50±1°C. Nas amostras de saliva e urina, foram identificados 243 e 500 metabolitos voláteis respetivamente, sendo estes pertencentes a diferentes famílias químicas. Posteriormente, utilizou-se a análise discriminante por mínimos quadrados parciais (PLS-DA) que permitiu observar uma boa separação entre os grupos controlo e oncológicos. Nas amostras salivares o grupo de pacientes com cancro da mama foi maioritariamente caracterizado pelo metabolito ácido benzeno carboxílico e o grupo de pacientes com cancro do pulmão pelo ácido hexanóico. Na urina o grupo de pacientes com cancro da mama foi maioritariamente caracterizado pelo metabolito 1-[2-(Isobutiriloxi)-1-metiletil]-2,2-dimetilpropil 2-metilpropanoato e o grupo de pacientes com cancro do pulmão pelo o-cimeno. Além da metodologia PLS-DA foi realizada a validação cruzada de monte carlo (MCCV) tendo-se obtido uma elevada taxa de classificação, sensibilidade e especificidade o que demonstra a robustez dos dados obtidos.

Produção de enzimas quitosanolíticas utilizando Paenibacillus ehimensis e Paenibacillus chitinolyticus para obtenção de quitoologossacarídeos

The acquisition of oligosaccharides from chitosan has been the subject of several studies in the pharmaceutical, biochemical, food and medical due to functional properties of these compounds. This study aimed to boost its production of chitooligosaccharides (COS) through the optimization of production and characterization of chitosanolytic enzymes secreted by microorganisms Paenibacillus chitinolyticus and Paenibacillus ehimensis, and evaluating the antioxidant potential of the products obtained. In the process of optimizing the production of chitosanase were employed strategies Fractional Factorial Experimental Design and Central Composite Rotatable Design. The results identified the chitosan, peptone and yeast extract as the components that influenced the production of chitosanase by these microorganisms. With the optimization of the culture media was possible to obtain an increase of approximately 8.1 times (from 0.043 to 0.35 U.mL U.mL-1) and 7.6 times (from 0.08 U.mL-1 to 0.61 U.mL-1) in the enzymatic activity of chitosanase produced by P. chitinolyticus and P. ehimensis respectively. Enzyme complexes showed high stability in temperature ranges between 30º and 55º C and pH between 5.0 and 9.0. Has seen the share of organic solvents, divalent ions and other chemical agents on the activity of these enzymes, demonstrating high stability of these crude complexes and dependence of Mn2+. The COS generated showed the ability of DPPH radical scavenging activity, reaching a maximum rate of scavenging of 61% and 39% when they were produced with enzymes of P. ehimensis and P. chitinolyticus respectively. The use of these enzymes in raw form might facilitate its use for industrial applications

Efeitos da dieta hipoprotéica na formação e composição de estruturas dentárias. Estudo Experimental em ratos wistar

Protein and caloric malnutrition has been considered one of the most concerned endemic diseases in Brazil and in the world. It has been known that depletion or reduction of proteins as far as meals are concerned can steer irreversible damages upon several organic systems. This study had as aim evaluate the effects the low-protein diet had over the formation and composition of the teeth components. 18 females and 6 males were used for the experiment. 12 from the 18 females had undertaken the low-protein diet (DH) for 03 weeks and the other 6, which remained, and those males had undertaken a controlled diet (DC) for the same period. All animals had the diets during their mating, pregnancy and lactation cycle. As soon as the offsprings had been born, 10 young males and females of each group faced a disease hood analysis to check the teeth germs of their lower fore teeth. The rest of the group had their lactation cycle normally 60 days. Then they were put to death and had their lower fore teeth removed both to be analyzed through a scanning electronic microscopy (SEM) of the structure alterations and to have their calcium checked by an atomic absorption of the phosphorus vanadate-molibdate method and by other minerals EDX method. The animals livers were removed to have their hepatic proteins analyzed as well. The histopatologic study showed that at first day of birth, all animals had their lower fore teeth come out. It was verified that 90% of the animals teeth were in an apposition and calcification period and it was possible to observe the dentin formation from 60% of the 90% already mentioned. Through the SEM method it could be realized that 90% of the animals of the DH group had their lower fore teeth easily broken and no definite shape. In this same group itself, it was also observed long micro fissures 369,66 nm ± 3,45 while the DC group had fissures of 174 nm ± 5,72. Now regarding the calcium and phosphorus concentration, it could be noticed that there was a great reduction of these components and other minerals in the DH group. Almost all minerals, except for the Cl and K, presented higher levels in the DC group enamel.The reduction of the protein input greatly influenced the offsprings´ weight and height. However the hepatic proteins had no important difference between the groups what can make one believe that those animals suffered from protein malnutrition of marasmic kind

Mapeamento cromossômico de genes ribossomais em espécies estuarinas da família Gerreidae Identificação de uniformidade cariotípica e sua empregabilidade com fins biotecnológicos - REPROGEN

Perciformes are dominant in the marine environment, characterized as the largest and most diverse fish group. Some families, as Gerreidae, popularly known as silver jennies, carapebas, or mojarras have a high economic potential to marine fish farming, natural explotation and game fishing. Genetic information of these species are of fundamental importance for their management and production. Despite exist over 13,000 marine fish species described, only 2% were cytogenetically analyzed and less than 1% have some reproductive characteristics known. Induced breeding, cytogenetic characterization and cryopreservation of gametes, represent important areas in applied fish studies. In this project cytogenetic analyzes were performed to acess genetic aspects of Gerreidae species, distributed in coastal and estuarine regions of Northeast Brazil. Different methods for identifying chromosomal regions were employed using conventional techniques (Ag-NORs, C-banding), staining with base-specific fluorochromes (DAPI-CMA3), and physical mapping of ribosomal genes 18S and 5S rDNA, through hybridization in situ with fluorescent probes (FISH). The six species analyzed showed remarkable chromosome conservatism. The 18S and 5S ribosomal genes when analyzed in phylogenetic perspective demonstrate varied evolutionary dynamics, suggesting ocurrence of stasis process in some groups and greater dynamism in others. Double FISH with 18S and 5S probes showed both how efficient cytotaxonomic markers in the homogeneous karyotypes of this group of species. The karyotypic pattern identified in addition to the evolutionary aspects of karyotype, are suggestive of existence of low potential of post-zygotic barrier, prompting further research to prospect for artificial interspecific hybridization of these species of commercial importance

Obtenção e caracterização de nanopartículas de argilominerais

Natural nanoclays are of great interest particularly for the production of polymer-based nanocomposites. In this work, kaolinite clays from two natural deposits in the State of the Rio Grande do Norte and Paraiba were purified with thermal treatment and chemical treatments, and characterized. Front to the gotten data, had been proposals methodologies for elimination or reduction of coarse particle texts, oxide of iron and organic substance. These methodologies had consisted of the combination of operations with thermal treatments, carried through in electric oven, and acid chemical attacks with and hydrogen peroxide. The Analyzers Thermogravimetric was used to examine the thermal stability of the nanoclays. The analysis indicated weight losses at temperatures under 110 ºC and over the temperature range of 350 to 550 ºC. Based on the thermal analysis data, the samples were submitted to a thermal treatment at 500 °C, for 8 h, to remove organic components. The X-ray diffraction patterns indicated that thermal treatment under 500 °C affect the basic structure of kaolinite. The BET surface area measurements ranged from 32 to 38 m2/g for clay samples with thermal treatment and from 36 to 53 m2/g for chemically treated samples. Thus, although the thermal treatment increased the surface area, through the removal of organic components, the effect was not significant and chemical treatment is more efficient, not affect the basic structure of kaolinite, to improve particle dispersion. SEM analysis confirms that the clay is agglomerated forming micron-size particles

Avaliação espectrofotométrica do manchamento de resinas odontológicas contendo nanopartículas

Composite resins have been subjected to structural modifications aiming at improved optical and mechanical properties. The present study consisted in an in vitro evaluation of the staining behavior of two nanohybrid resins (NH1 and NH2), a nanoparticulated resin (NP) and a microhybrid resin (MH). Samples of these materials were prepared and immersed in commonly ingested drinks, i.e., coffee, red wine and acai berry for periods of time varying from 1 to 60 days. Cylindrical samples of each resin were shaped using a metallic die and polymerized during 30 s both on the bottom and top of its disk. All samples were polished and immersed in the staining solutions. After 24 hours, three samples of each resin immersed in each solution were removed and placed in a spectrofotome ter for analysis. To that end, the samples were previously diluted in HCl at 50%. Tukey tests were carried out in the statistical analysis of the results. The results revealed that there was a clear difference in the staining behavior of each material. The nanoparticulated resin did not show better color stability compared to the microhybrid resin. Moreover, all resins stained with time. The degree of staining decreased in the sequence nanoparticulated, microhybrid, nanohybrid MH2 and MH1. Wine was the most aggressive drink followed by coffee and acai berry. SEM and image analysis revealed significant porosity on the surface of MH resin and relatively large pores on a NP sample. The NH2 resin was characterized by homogeneous dispersion of particles and limited porosity. Finally, the NH1 resin depicted the lowest porosity level. The results revealed that staining is likely related to the concentration of inorganic pa rticles and surface porosity

Influência do uso de combustíveis alternativos na síntese por combustão via microondas para a produção de materiais cerâmicos com estrutura espinélio

The development and study of detectors sensitive to flammable combustible and toxic gases at low cost is a crucial technology challenge to enable marketable versions to the market in general. Solid state sensors are attractive for commercial purposes by the strength and lifetime, because it isn t consumed in the reaction with the gas. In parallel, the use of synthesis techniques more viable for the applicability on an industrial scale are more attractive to produce commercial products. In this context ceramics with spinel structure were obtained by microwave-assisted combustion for application to flammable fuel gas detectors. Additionally, alternatives organic-reducers were employed to study the influence of those in the synthesis process and the differences in performance and properties of the powders obtained. The organic- reducers were characterized by Thermogravimetry (TG) and Derivative Thermogravimetry (DTG). After synthesis, the samples were heat treated and characterized by Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), analysis by specific area by BET Method and Scanning Electron Microscopy (SEM). Quantification of phases and structural parameters were carried through Rietveld method. The methodology was effective to obtain Ni-Mn mixed oxides. The fuels influenced in obtaining spinel phase and morphology of the samples, however samples calcined at 950 °C there is just the spinel phase in the material regardless of the organic-reducer. Therefore, differences in performance are expected in technological applications when sample equal in phase but with different morphologies are tested

Obtenção de filtro cerâmico a partir da diatomita e casca de arroz carbonizada visando tratamento de efluente têxtil

The effluents released by the textile industry have high concentrations of alkali, carbohydrates, proteins, in addition to colors containing heavy metals. Therefore, a filter was prepared aiming primarily to the removal of color. In order to prepare this filter, rice hulls and diatomite were used, which have in their structure, basically amorphous hydrated silica. The silica exists in three crystalline forms: quartz, tridymite and cristobalite. In accordance with the above considerations, this study was divided into two stages; the first corresponds to the preparation of the filter and the second to carry out the tests in the effluent/filter in order to verify the efficiency of the color removal. First, the raw material was subjected to a chemical analysis and XRD, and then the diatomite was mixed, via humid, with a planetarium windmill with 20 %, 40 %, 60 % and 80 % of rice husk ash. To the mixture, 5 % carboxymethylcellulose (CMC) was added as a binder at room temperature. The samples were uniaxially compacted into metallic matrix of 0.3 x 0.1 cm² of area at a pressure of 167 MPa by means of hydraulic press and then sintered at temperatures of 1,000 °C, 1,200 °C and 1,400 °C for 1 h and submitted to granulometry test using laser, linear retraction, water absorption, apparent porosity and resistance to bending, DTA, TMA and XRD. To examine the pore structure of the samples scanning electron microscope (SEM) was used. Also tests were carried out in a mercury porosimeter to verify the average size of the pores and real density of the samples. In the second stage, samples of the effluent were collected from a local industry, whose name will be preserved, located in Igapó, in the State of Rio Grande do Norte - RN. The effluent was first pretreated before filtration and then subjected to a treatment of flotation. The effluent was then characterized before and after filtration, with parameters of color, turbidity, suspended solids, pH, chemical and biochemical oxygen demand (COD and BOD). Thus, through the XRD analysis the formation of cristobalite α in all samples was observed. The best average size of pore was found to be 1.75 μm with 61.04 % apparent porosity, thus obtaining an average 97.9 % color removal and 99.8 % removal of suspended solid

Efeito da adição dos azocorantes DR73 e DB79 nas propriedades do poli(metacrilato de metila)

Currently new polymeric materials have been developed to replace other of traditionally materials classes. The use of dyes allows to expand and to diversify the applications in the polymeric materials development. In this work the behavior and ability of azo dyes Disperse Blue 79 (DB79) and Disperse Red 73 (DR73) on poly(methyl methacrylate) (PMMA) were studied. Two types of mixtures were used in the production of masterbatches: 1) rheometer 2) solution. Processing by extrusion-blow molding of PMMA was carried out in order to evaluate the applications of polymeric films. Thermal analysis were performed by thermogravimetry to evaluate polymer and azo dyes thermal stability. Colorimetric analysis were obtained through monitoring the spectral variations associated with sys/trans/anti azo dyes isomerization process Colorimetric data were treated and evaluated in accordance to the color system RGB and CIEL*ab, by monitoring the color change as function of time. Mechanical properties, characterized by tensile tests, were evaluated and correlated with the presence and content of azo dyes in the samples. Analyses by scanning electronic microscopy (SEM) were performed on the surfaces of samples to check the azo dye dispersion after the mixing process. It was concluded that the production of PMMA/azo dyes is possible and feasible, and the mixtures produced had synergy of properties for use in various applications

Obtenção de uma porcelana dielétrica a partir de matérias-primas do Rio Grande do Norte

The dielectric porcelain is usually obtained by mixing various raw materials proportions and is used in the production of electronic equipment for various applications, from capacitors of high and low Power to insulators for low, medium, high and extra high voltage, which are used in distribution lines and transmission of electricity.This work was directed to the s tudy of technological properties of technic porcelain, made from raw materials extracted from pegmatites found in the regions of Seridó and the Alto Oeste of Rio Grande do Norte, which are made of kaolin, quartz and feldspar, abundant and high quality in these regions. The technic ceramics were obtained by mixing in appropriate levels, kaolin, feldspar, quartz and clay, the last item from a pottery in the city of Sao Gonçalo do Amarante, Rio Grande do Norte. During the development the following characterizations correlated to raw materials were made: laser particle sizing, x-ray diffraction, DTA and TG. The compositions studied were formed by uniaxial pressing at a pressure of 50 MPa and sintered at temperatures ranging from 1150 to 1350ºC and levels (times) of sintering between 30, 60, 90 and 120 minutes. The characterization of the samples were taken from the analysis of weight loss, linear shrinkage, porosity, stoneware curve, bulk density, flexural strength of three points, SEM and X-ray diffraction, TMA, Dielectric and cross Resistivity. The studied materials can be employed in producing the objects used in electrical engineering such as: insulators for low, medium and high-voltage electrical systems, command devices, bushing insulation for transformers, power capacitors, spark plugs, receptacles for fluorescent and incandescent light bulbs and others

Estudos comparativos do ciclo de regeneração de diferentes tipos de silicoaluminofosfatos

Different types of heterogeneous catalysts of the silicoaluminophosphate type, (SAPO-5, SAPO-11, SAPO-31, SAPO-34 and SAPO-41), molecular sieves with a: AFI, AEL, ATO, CHA and AFO structure, respectively, were synthesized through the hydrothermal method. Using sources such as hydrated alumina (pseudobohemita), phosphoric acid, silica gel, water, as well as, different types of organic structural templates, such as: cetyltrimethylammonium bromide (CTMABr), di-isopropylamine (DIPA), di-n- propylamine (DNPA) and tetraethylammonium hydroxide (TEOS), for the respective samples. During the preparation of the silicoaluminophosphates, the crystallization process of the samples occurred at a temperature of approximately 200 ° C, ranging through periods of 18-72 h, when it was possible to obtain pure phases for the SAPOs. The materials were furthermore washed with deionized water, dried and calcined to remove the molecules of the templates. Subsequently the samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), absorption spectroscopy in the infrared region (FT-IR), specific surface area and thermal analysis via TG/DTG. The acidic properties were determined using adsorption of n-butylamine followed by programmed termodessorption. These methods revealed that the SAPO samples showed a typically weak to moderate acidity. However, a small amount of strong acid sites was also detected. The deactivation of the catalysts was conducted by artificially coking the samples, followed by n-hexane cracking reactions in a fixed bed with a continuous flow micro-reactor coupled on line to a gas chromatograph. The main products obtained were: ethane, propane, isobutene, n-butane, n-pentane and isopentane. The Vyazovkin (model-free) kinetics method was used to determine the catalysts regeneration and removal of the coke

Modificação superficial de filmes de poliéster usando plasma a baixa temperatura

A polyester film has a vast application field, due some properties that are inherent of this kind of material such as, good mechanical resistance, chemical resistance to acids and bases and low production cost. However, this material has some limitations as low superficial tension, flat surface, low affinity to dyers, and poor adhesion which impede the use of the same ones for some finality as good wettability. Among the existent techniques to increase the superficial tension, plasma as energy source is the more promising technique, because of their versatility and for not polluting the environment. The plasma surface polymeric modification has been used for many researchers, because it does not affect the environment with toxic agents, the alterations remains only at nanometric layers and this technique shows expressive results. Then, due to its good acceptance, polyester films were treated with oxygen plasma varying the treatment time from 10 to 60 min with an increase of 10 min to each subsequent treatment. Also, the samples were treated with a gas mixture (nitrogen + oxygen) varying the percentage of each gas the mixture from 0 to 100%, the treatment time remaining constant to all treatments (10 min). After plasma treatment the samples were characterized by contact angle, surface tension, Raman spectroscopy, Infrared attenuated total reflection (IR-ATR) and atomic force microscopy, with the aim to study the wettability increase of treated polyester films as its variables. In the (O2/N2) plasma treatment of polyester films can be observed an increase of superficial roughness superior to those treated by O2 plasma. By the other hand, the chemical modification through the implantation of polar groups at the surface is obtained more easily using O2 plasma treatment