Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load.

OBJECTIVES: (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. METHODS: Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturer's instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. RESULTS: There was a significant interaction between material and load as well as between load and brushing time (p<0.0001). The microhybrid and hybrid materials demonstrated more surface deterioration with higher loads, whereas with the microfilled resins Heliomolar and Adoro it was vice versa. For ceramic materials, no or little deterioration was observed over time and independent of the load. The ceramic materials and 3 of the composite materials (roughness) showed no further deterioration after 5h of toothbrushing. Mean surface gloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. SIGNIFICANCE: The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be quickly assessed by measuring surface gloss. For this purpose, a brushing time of 10h (=72,000 strokes) is needed. In further comparative studies, specimens of different materials should be tested in one series to estimate the true variability.

Deposições rituais de vasos cerâmicos em contextos domésticos: os exemplares do povoado calcolítico fortificado do Outeiro Redondo (Sesimbra)

A identificação de dois recipientes colocados ritualmente em posição invertida, conotáveis com a derradeira fase de ocupação do povoado calcolítico do Outeiro Redondo (Sesimbra), e deste modo com uma cerimónia de abandono do próprio sítio arqueológico, conduziu à procura de exemplos comparáveis. Tal procura estendeu‑se, depois, às evidências de utilização ritual, em contextos habitacionais, de recipientes cerâmicos, desde a época a que pertencem os exemplares em causa, até ao Período Romano. Teve‑se ainda em consideração o contributo da Etnografia e da Arqueologia africana, através da experiência do signatário, relacionada com intervenção arqueológica que dirigiu em unidade doméstica do século XVII/XVIII da ilha de São Vicente (República de Cabo Verde). Sem se pretender assumir a continuidade desta prática ritual no actual território português, desde o Calcolítico até pelo menos à Época Romana, por poder tratar‑se de uma simples convergência, recorrentemente verificada ao longo da Idade do Bronze e do Ferro. Como se deverá interpretar o achado do Outeiro Redondo? As evidências assinaladas através do uso ritual de recipientes cerâmicos em contextos habitacionais podem ter um significado ligado ao próprio quotidiano, como no povoado de Fraga da Pena (Fornos de Algodres). Aquelas afiguram‑se, contudo, mais abundantes e expressivas no que se refere quer às práticas de natureza fundacional, quer às relacionadas com o abandono; por vezes, dada a presença de aves sacrificadas, tais rituais poderiam também revestir uma função propiciatória, que não é incompatível com as duas funções mencionadas, também elas não incompatíveis entre si.

Deposições rituais de vasos cerâmicos em contextos domésticos: os exemplares do povoado calcolítico fortificado do Outeiro Redondo (Sesimbra)

A identificação de dois recipientes colocados ritualmente em posição invertida, conotáveis com a derradeira fase de ocupação do povoado calcolítico do Outeiro Redondo (Sesimbra), e deste modo com uma cerimónia de abandono do próprio sítio arqueológico, conduziu à procura de exemplos comparáveis. Tal procura estendeu‑se, depois, às evidências de utilização ritual, em contextos habitacionais, de recipientes cerâmicos, desde a época a que pertencem os exemplares em causa, até ao Período Romano. Teve‑se ainda em consideração o contributo da Etnografia e da Arqueologia africana, através da experiência do signatário, relacionada com intervenção arqueológica que dirigiu em unidade doméstica do século XVII/XVIII da ilha de São Vicente (República de Cabo Verde). Sem se pretender assumir a continuidade desta prática ritual no actual território português, desde o Calcolítico até pelo menos à Época Romana, por poder tratar‑se de uma simples convergência, recorrentemente verificada ao longo da Idade do Bronze e do Ferro. Como se deverá interpretar o achado do Outeiro Redondo? As evidências assinaladas através do uso ritual de recipientes cerâmicos em contextos habitacionais podem ter um significado ligado ao próprio quotidiano, como no povoado de Fraga da Pena (Fornos de Algodres). Aquelas afiguram‑se, contudo, mais abundantes e expressivas no que se refere quer às práticas de natureza fundacional, quer às relacionadas com o abandono; por vezes, dada a presença de aves sacrificadas, tais rituais poderiam também revestir uma função propiciatória, que não é incompatível com as duas funções mencionadas, também elas não incompatíveis entre si.

A estação arqueológica de Salamansa (ilha de São Vicente, República de Cabo Verde)

Apresentam‑se os principais resultados obtidos nas duas missões arqueológicas patrocinadas pelo Centro Português de Actividades Subaquáticas (CPAS) à ilha de São Vicente (República de Cabo Verde), em 1998 e em 2005. Em 1998, confirmou‑se o efectivo interesse arqueológico do sítio, localizado sobre o mar, em local abrigado da vasta baía de Salamansa, situada na parte setentrional da ilha, tendo‑se registado a respectiva extensão e estratigrafia e procedido à colheita de amostras para datação. Embora os resultados dessa campanha tivessem sido publicados, indicando estação de carácter habitacional, revelada pela notável acumulação de conchas, acompanhada de abundantes fragmentos de cerâmicas manuais, de produção africana, mantinha‑se indefinida a sua verdadeira natureza. Impunha‑se, assim, proceder à escavação integral da área que ainda subsistia da estação — sujeita de forma contínua a forte erosão marinha — bem como à colheita de novos materiais para datação, de forma a confirmar as conclusões preliminares anteriormente obtidas, objectivos que se concretizaram em 2005. Deste modo, foi possível concluir que, contrariando a hipótese, de início considerada, de poder corresponder a um testemunho da ocupação da ilha em época anterior à chegada dos Portugueses — hipótese que já as primeiras datas de radiocarbono contradiziam — se trata de um sítio onde uma unidade habitacional construída por muros de pedra seca, de planta ortogonal, revela inspiração europeia, aliás sublinhada pelos materiais exumados, onde estão representados produtos com tal origem, como cachimbos de caulino, vidros, faianças portuguesas, e projécteis de armas de fogo, a par de objectos oriundos do Extremo Oriente, num quadro dominado pelas produções cerâmicas africanas. Esta situação evidencia um estabelecimento cuja ocupação se centrou no século XVII, conforme indicam os materiais recolhidos e os resultados das datações obtidas, francamente aberto aos contactos de longa distância, apesar do isolamento do local escolhido. Os restos faunísticos recolhidos, com a presença deburro e de boi, sugerem um estacionamento sedentário, sendo a alimentação assegurada essencialmente pela captura de tartarugas, pela pesca e pela recolecção de moluscos marinhos (especialmente grandes lapas) e complementada pelo consumo de cabra, que poderia ser doméstica ou caçada, dado o estado selvagem a que retornou ali esta espécie. na última parte do trabalho, discutem‑se as diversas hipóteses susceptíveis de explicar esta estação — desde um entreposto comercial relacionado com a exploração agro‑pecuária da ilha de Santo Antão, passando por pequeno estabelecimento especializado de apoio à navegação, com a produção de carne salgada de tartaruga, até ter constituído refúgio relacionado com a intensa pirataria vigente à época no arquipélago, tendo presente os elementos históricos conhecidos, que, aliás, indicam que o início da ocupação permanente de São Vicente só se produziu a partir da segunda década do século XIX. Seja como for, a forte componente cultural africana revelada pelo espólio destes primeiros ocupantes da ilha expressa‑se também pelos rituais que terão envolvido o abandono do estabelecimento, com o enterramento de dois vasos emborcados sob o chão da habitação explorada, e a deposição de uma pequena taça, nas mesmas circunstâncias, junto à parede da mesma, do lado externo.

Oscil.lacions del nivell del mar i sediments associats durant l'Holocè a la Costa Brava Meridional (Girona)

Several marine deposits in the southern Costa Brava shoreline have been studied. They appear at different heights above and below the present sea level. Three groups are defined in relation to their origin: conglomerate levels at the bottom of the cliffs, not-cementedemerged beaches and cemented submerged beaches. The age of the emerged beaches has been accurately determined by means of the ceramic content and radiocarbon dating. Chronological succession of the deposits and their stratigraphic and paleontological characteristics allow to define a sequence of the sea level changes during the latest stages of the versiliane transgression in the studied area

Estudio sobre la resistencia quimica de baldosas ceramicas no-esmaltadas para pavimentos industriales

The chemical resistance of ceramic tiles is the subject of the European Standard UNE-EN ISO 10545-13. In order to evaluate the effect of aqueous solutions of several chemicals agents on the aspect of the tile surface, this standard establishes a series of tests at room temperature followed by visual inspection. According to this standard the tiles of this study are classified as being of maximum resistance (UHA). However operating conditions can be more aggressive than those detailed in the standard. So, a systematic study has been undertaken. In the present work, the effect of aqueous solutions of several organic and inorganic acids on the tile surface is evaluated. Samples immersed in different solutions are subjected to the following conditions: T= 60º C; pH=2 and to agitation processes. Visual analysis, as well as optical microscopy and scanning electron microscopy (SEM) were performed in order to determine the possible variation of the superficial aspect of tiles. Moreover, atomic absorption spectrophotometry has been used in order to obtain quantitative information concerning the solubility of system M (III)-L (M= Fe; L= H2O or L= ligand). The results obtained show, in all cases, a progressive dissolution of iron oxide precipitates presents in the ceramic body

Metaestabilidad estructural a traves de proyeccion termica

Recientes investigaciones en el campo de los materiales cerámicos han dado cuenta de la importancia de la metaestabilidad para obtener estructuras con características singulares. Durante la consolidación del material las fases mestaestables se transforman en una estructura donde se produce la inhibición del crecimiento de grano. Este efecto es una consecuencia directa de la inmiscibilidad de dos fases en estado sólido. Los nanocomposites conseguidos, gracias a su pequeño tamaño de grano y a su estructura uniforme, exhiben unas interesantes propiedades como elevada dureza y tenacidad. Estas fases metaestables pueden ser producidas por diversas técnicas entre las que se encuentra la proyección térmica. En concreto en este trabajo se ha empleado la Proyección por plasma (APS). Las fases de partida inmiscibles, son fundidas y homogeneizadas durante su corta estancia en la zona caliente del plasma. Seguidamente, las partículas fundidas y aceleradas por el plasma, se someten a un enfriamiento rápido o temple (quenching) en un medio líquido, como el agua o en un substrato enfriado con nitrógeno líquido, formándose a través de este proceso las fases metaestables. El principal objetivo de este trabajo ha sido la obtención de polvos cerámicos metastables a través de la aplicación de APS y el establecimiento de un proceso de temple conducente a la formación de fases metastables así como la caracterización estructural de éstas. Como última etapa del trabajo se han estudiado los materiales nanoestructurados conseguidos tras realizar tratamientos térmicos.

Mineralogía y ceramicidad de las arcillas del yacimiento de Sitjar, Onda (Castellón).

Este trabajo tiene por objeto la caracterizaci6n mineralbgica y fsico-qumica de las arcillas terciarias explotadas en el yacimiento de Sitjar, cercano a la localidad de Onda (Castellbn), utilizadas como materia prima por la industria ceramica castellonense. Se estudian tambitn algunas propiedades ceramicas de estas arcillas, incidiendo en el comportamiento ttrmico, para su correcta aplicaci6n. La composici6n qumica y mineral6gica posibilita su utilizaci6n como aditivo para la fabricaci6n de materiales porosos y refractarios.

Preliminary report of the first season work of the International Pluridisciplinary Archaeological Expedition to Bactria 2008

This year the development of our project can be divided into two main clearly different parts, on one hand the laboratory work, where the sampled ceramic individuals has been prepared and analyzed and the elaboration of the data obtained during the excavation of 2007 has been finished and, on the other hand, the field work developed at the archaeological site during this specific year (2008).In the mark of the analytical work a significant number of ceramic individuals (144) from the different stratigraphical units from various areas of the excavation of Termez and Tchinguiz Tepe sampled duringthe new and previous field works has been archaeometrically characterized. This specific material includedindividuals dated into the Hellenistic and Sassanian period, which has been confirmed by C14dating upon organic samples.At the same time, in the mark of the field work of 2008 the archaeological record, already started tobe under study during the excavation of 2007, has been completed and two new archaeological recordshave been registered on of which is located in the area of Tchinguiz Tepe. For the archeological studythe information of the previous geophysical prospecting has been indisputably taken into considerationand the same methodology has been applied to crosscheck the latter archaeological results.

Nitrate and ammonium in soil solution in tobacco management systems

Tobacco farmers of southern Brazil use high levels of fertilizers, without considering soil and environmental attributes, posing great risk to water resources degradation. The objective of this study was to monitor nitrate and ammonium concentrations in the soil solution of an Entisol in and below the root zone of tobacco under conventional tillage (CT), minimum tillage (MT) and no-tillage (NT). The study was conducted in the small-watershed Arroio Lino, in Agudo, State of Rio Grande do Sul, Brazil. A base fertilization of 850 kg ha-1 of 10-18-24 and topdressing of 400 kg ha-1 of 14-0-14 NPK fertilizer were applied. The soil solution was sampled during the crop cycle with a tension lysimeter equipped with a porous ceramic cup. Ammonium and nitrate concentrations were analyzed by the distillation and titration method. Nitrate concentrations, ranging from 8 to 226 mg L-1, were highest after initial fertilization and decreased during the crop cycle. The average nitrate (N-NO3-) concentration in the root zone was 75 in NT, 95 in MT, and 49 mg L-1 in CT. Below the root zone, the average nitrate concentration was 58 under NT, 108 under MT and 36 mg L-1 under CT. The nitrate and ammonium concentrations did not differ significantly in the management systems. However, the nitrate concentrations measured represent a contamination risk to groundwater of the watershed. The ammonium concentration (N-NH4+) decreased over time in all management systems, possibly as a result of the nitrification process and root uptake of part of the ammonium by the growing plants.

Early Iron Age Pottery: A Quantitative Approach, Proceedings of the International Round Table organized by the Swiss School of Archaeology in Greece (Athens, November 28-30, 2008)

Quantitative approaches in ceramology are gaining ground in excavation reports, archaeological publications and thematic studies. Hence, a wide variety of methods are being used depending on the researchers' theoretical premise, the type of material which is examined, the context of discovery and the questions that are addressed. The round table that took place in Athens on November 2008 was intended to offer the participants the opportunity to present a selection of case studies on the basis of which methodological approaches were discussed. The aim was to define a set of guidelines for quantification that would prove to be of use to all researchers. Contents: 1) Introduction (Samuel Verdan); 2) Isthmia and beyond. How can quantification help the analysis of EIA sanctuary deposits? (Catherine Morgan); 3) Approaching aspects of cult practice and ethnicity in Early Iron Age Ephesos using quantitative analysis of a Protogeometric deposit from the Artemision (Michael Kerschner); 4) Development of a ceramic cultic assemblage: Analyzing pottery from Late Helladic IIIC through Late Geometric Kalapodi (Ivonne Kaiser, Laura-Concetta Rizzotto, Sara Strack); 5) 'Erfahrungsbericht' of application of different quantitative methods at Kalapodi (Sara Strack); 6) The Early Iron Age sanctuary at Olympia: counting sherds from the Pelopion excavations (1987-1996) (Birgitta Eder); 7) L'aire du pilier des Rhodiens à Delphes: Essai de quantification du mobilier (Jean-Marc Luce); 8) A new approach in ceramic statistical analyses: Pit 13 on Xeropolis at Lefkandi (David A. Mitchell, Irene S. Lemos); 9) Households and workshops at Early Iron Age Oropos: A quantitative approach of the fine, wheel-made pottery (Vicky Vlachou); 10) Counting sherds at Sindos: Pottery consumption and construction of identities in the Iron Age (Stefanos Gimatzidis); 11) Analyse quantitative du mobilier céramique des fouilles de Xombourgo à Ténos et le cas des supports de caisson (Jean-Sébastien Gros); 12) Defining a typology of pottery from Gortyn: The material from a pottery workshop pit, (Emanuela Santaniello); 13) Quantification of ceramics from Early Iron Age tombs (Antonis Kotsonas); 14) Quantitative analysis of the pottery from the Early Iron Age necropolis of Tsikalario on Naxos (Xenia Charalambidou); 15) Finding the Early Iron Age in field survey: Two case studies from Boeotia and Magnesia (Vladimir Stissi); 16) Pottery quantification: Some guidelines (Samuel Verdan)

PEASANT AND SCIENTIFIC KNOWLEDGE ON PLANOSOLS AS A SOURCE OF MATERIALS IN THE MAKING OF NON-INDUSTRIAL POTTERY

Ethnopedological studies have mainly focused on agricultural land uses and associated practices. Nevertheless, peasant and indigenous populations use soil and land resources for a number of additional purposes, including pottery. In the present study, we describe and analyze folk knowledge related to the use of soils in non-industrial pottery making by peasant potters, in the municipality of Altinho, Pernambuco State, semiarid region at Brazil. Ethnoscientific techniques were used to record local knowledge, with an emphasis on describing the soil materials recognized by the potters, the properties they used to identify those soil materials, and the criteria employed by them to differentiate and relate such materials. The potters recognized three categories of soil materials: “terra” (earth), “barro” (clay) and, “piçarro” (soft rock). The multi-layered arrangement of these materials within the soil profiles was similar to the arrangement of the soil horizon described by formal pedologists. “Barro vermelho” (red clay) was considered by potters as the principal ceramic resource. The potters followed morphological and utilitarian criteria in distinguishing the different soil materials. Soils from all of these sites were sodium-affected Alfisols and correspond to Typic Albaqualf and Typic Natraqualf in the Soil Taxonomy (Soil Survey Staff, 2010).

Round robin test: wear of nine dental restorative materials in six different wear simulators - supplement to the round robin test of 2005.

OBJECTIVE: The purpose of the present study was to submit the same materials that were tested in the round robin wear test of 2002/2003 to the Alabama wear method. METHODS: Nine restorative materials, seven composites (belleGlass, Chromasit, Estenia, Heliomolar, SureFil, Targis, Tetric Ceram) an amalgam (Amalcap) and a ceramic (IPS Empress) have been submitted to the Alabama wear method for localized and generalized wear. The test centre did not know which brand they were testing. Both volumetric and vertical loss had been determined with an optical sensor. After completion of the wear test, the raw data were sent to IVOCLAR for further analysis. The statistical analysis of the data included logarithmic transformation of the data, the calculation of relative ranks of each material within each test centre, measures of agreement between methods, the discrimination power and coefficient of variation of each method as well as measures of the consistency and global performance for each material. RESULTS: Relative ranks of the materials varied tremendously between the test centres. When all materials were taken into account and the test methods compared with each other, only ACTA agreed reasonably well with two other methods, i.e. OHSU and ZURICH. On the other hand, MUNICH did not agree with the other methods at all. The ZURICH method showed the lowest discrimination power, ACTA, IVOCLAR and ALABAMA localized the highest. Material-wise, the best global performance was achieved by the leucite reinforced ceramic material Empress, which was clearly ahead of belleGlass, SureFil and Estenia. In contrast, Heliomolar, Tetric Ceram and especially Chromasit demonstrated a poor global performance. The best consistency was achieved by SureFil, Tetric Ceram and Chromasit, whereas the consistency of Amalcap and Heliomolar was poor. When comparing the laboratory data with clinical data, a significant agreement was found for the IVOCLAR and ALABAMA generalized wear method. SIGNIFICANCE: As the different wear simulator settings measure different wear mechanisms, it seems reasonable to combine at least two different wear settings to assess the wear resistance of a new material.

Effects of Pavement Surface Texture on Noise and Frictional Characteristics HR-281, February 1987

An experimental modification of the transverse groove surface texture of a section of an urban interstate highway was performed by the Iowa Department of Transportation. Transverse groove texturing i s a design feature required by the Federal Highway Administration t o reduce skidding under wet pavement conditions. Adjacent residents claimed the texturing was the cause of especially annoying tonal characteristics within the traffic noise. A research proposal to modify the existing texture pattern by surface grinding and to study the noise and friction effects was approved for funding by the Iowa Highway Research Board. Results i n the form of a comparison between traffic noise before modification and traffic noise immediately after and 15 months after modification indicate that the change in surface texture has lowered overall traffic noise levels by reducing a high frequency component of the traffic noise spectrum. Fraffic testing data show reduced capacity of the roadway to inhibit wet pavement skidding as a result of the surface modification.

Analysis of bioavailable arsenic in rice with whole cell living bioreporter bacteria.

A multiwell plate bioassay was developed using genetically modified bacteria (bioreporter cells) to detect inorganic arsenic extracted from rice. The bacterial cells expressed luciferase upon exposure to arsenite, the activity of which was detected by measurement of cellular bioluminescence. The bioreporter cells detected arsenic in all rice varieties tested, with averages of 0.02-0.15 microg of arsenite equivalent per gram of dry weight and a method detection limit of 6 ng of arsenite per gram of dry rice. This amounted to between approximately 20 and 90% of the total As content reported by chemical methods for the same sample and suggested that a major proportion of arsenic in rice is in the inorganic form. Calibrations of the bioassay with pure inorganic and organic arsenic forms showed that the bacterial cells react to arsenite with highest affinity, followed by arsenate (with 25% response relative to an equivalent arsenite concentration) and trimethylarsine oxide (at 10% relative response). A method for biocompatible arsenic extraction was elaborated, which most optimally consisted of (i) grinding rice to powder, (ii) mixing with an aqueous solution containing pancreatic enzymes, (iii) mechanical shearing, (iv) extraction in mild acid conditions and moderate heat, and (v) centrifugation and pH neutralization. Detection of mainly inorganic arsenic by the bacterial cells may have important advantages for toxicity assessment of rice consumption and would form a good complement to total chemical arsenic determination.