Evaluation of Gap-Graded Asphalt Concrete Mixtures Vol. 3. Appendix, HR-157, Volume 3 (Part 3), 1972 (1973)

This report presents the results of a comparative laboratory study between well- and gap-graded aggregates used in asphalt concrete paving mixtures. A total of 424 batches of asphalt concrete mixtures and 3,960 Marshall and Hveem specimens were examined. There is strong evidence from this investigation that, with proper combinations of aggregates and asphalts, both continuous- and gap-graded aggregates can produce mixtures of high density and of qualities meeting current design criteria. There is also reason to believe that the unqualified acceptance of some supposedly desirable, constant, mathematical relationship between adjacent particle sizes of the form such as Fuller's curve p = 100 (d/D)n is not justified. It is recommended that. the aggregate grading limits be relaxed or eliminated and that the acceptance or rejection of an aggregate for use in asphalt pavement be based on individual mixture evaluation. Furthermore, because of the potential attractiveness of gap-graded asphalt concrete in cost, quality, and skid and wear resistance, selected gap-graded mixtures are recommended for further tests both in the laboratory and in the field, especially in regard to ease of compaction and skid and wear resistance.

The Effects of Crushed Particles in Asphalt Mixtures, HR-311 and MLR-88-16, Part 1, 1990

One of the most serious impediments to the continued successful use of hot mix asphalt (HMA) pavements is rutting. The Iowa Department of Transportation has required 85% crushed particles and 75 blow Marshall mix design in an effort to prevent rutting on interstate roadways. The objective of this research and report is to develop relation~hips between the percent of crushed particles and resistance to rutting in pavement through the use of various laboratory test procedures. HMA mixtures were made with 0, 30, 60, 85 and 100% crushed gravel, crushed limestone and crushed quartzite combined with uncrushed sand and gravel. These aggregate combinations were used with 4, 5 and 6% asphalt cement (ac). Laboratory testing included Marshall stability, resilient modulus, indirect tensile and creep. A creep resistance factor (CRF) was developed to provide a single numeric value for creep test results. The CRF values relate well to the amount of crushed particles and the perceived resistance to rutting. The indirect tensile test is highly dependent on the ac with a small effect from the percent of crushed particles. The Marshall stability from 75 blow compaction relates well to the percent of crushed particles. The resilient modulus in some cases is highly affected by grade of ac.

Olfactory mediated interactions between Citrus aurantium Toxoptera citricida and Lysiphlebus testaceipes

The objective of this study was to establish whether there are olfactory interactions in the Lysiphlebus testaceipes Toxoptera citricida and Citrus aurantium tritrophic system. The response of male and female L. testaceipes to different odour sources of the host plant C. aurantium, the aphid host T. citricida and aphid-plant complex were investigated using a Y-tube olfactometer. Laboratory experiments were conducted by exposing individually aged male and female L. testaceipes to eight different odour treatments. Response of the parasitoids was taken after 15 min exposure to the volatiles from the different odour sources and based on their orientation to the particular chamber. Seventy percent of both male and female L. testaceipes showed high attractivity to aphid infested leaves. There was no significant difference based on age and sex of the parasitoid on their choice of odour. The organic compounds released by these combinations acted as semiochemicals in the tritrophic interactions and it is suggested that insect feeding induced attraction of the parasitoid L. testaceipes.

Cardiac motion estimation by joint alignment of tagged MRI sequences

Image registration has been proposed as an automatic method for recovering cardiac displacement fields from Tagged Magnetic Resonance Imaging (tMRI) sequences. Initially performed as a set of pairwise registrations, these techniques have evolved to the use of 3D+t deformation models, requiring metrics of joint image alignment (JA). However, only linear combinations of cost functions defined with respect to the first frame have been used. In this paper, we have applied k-Nearest Neighbors Graphs (kNNG) estimators of the -entropy (H ) to measure the joint similarity between frames, and to combine the information provided by different cardiac views in an unified metric. Experiments performed on six subjects showed a significantly higher accuracy (p < 0.05) with respect to a standard pairwise alignment (PA) approach in terms of mean positional error and variance with respect to manually placed landmarks. The developed method was used to study strains in patients with myocardial infarction, showing a consistency between strain, infarction location, and coronary occlusion. This paper also presentsan interesting clinical application of graph-based metric estimators, showing their value for solving practical problems found in medical imaging.

Evaluation of Metakaolin for HPC Deck Overlays, MLR-11-01, 2011

The use of High Performance Concrete (HPC) in Iowa has consisted of achieving slightly higher compressive strengths with an emphasis on reduced permeability. Concrete with reduced permeability has increased durability by slowing moisture and chloride ingress. Achieving reduced permeability has typically been accomplished with combinations of slag and Class C fly ash, or the use of blended cements such as locally available Type IS(20), IS(25) and Type IP(25) in conjunction with Class C fly ash. Fly ash has been used in the majority of concrete placed in Iowa since 1984 and slag has been available in Iowa since 1995. During the economic downturn in 2008, one of the cement plants that produced a Type IS(25) cement was forced to shut down, which reduced the availability of blended cements, typically used on HPC deck overlays. Recently, a source of high reactivity metakaolin has been made available. Metakaolin is produced by heating a pure kaolinite clay to 650 to 700 °C in a rotary kiln (calcining). Metakaolin is a white pozzolan that is used to produce concrete with increased strengths, reduced permeability, reduced efflorescence, and resistance to alkali silica reactivity. The W.R. Grace MK-100 metakaolin will likely be available in dissolvable bags between 25 and 50 pounds. Thus, the mix designs were based on the anticipated bag size range for field use. This research evaluated metakaolin mixes with and without Class C fly ash. Results indicated a seven percent replacement with metakaolin produced concrete with increased strengths and low permeability. When used with Class C fly ash, permeability is reduced to very low rating. Metakaolin may be used to enhance hardened concrete properties for use in high performance concrete (HPC).

Length Change of P. C. Concrete Due to Moisture Content, MLR-85-09, 1987

Portland cement concrete is an outstanding structural material but stresses and cracks often occur in large structures due to drying shrinkage. The objective of this research was to determine the change in length due to loss of moisture from placement through complete drying of portland cement concrete. The drying shrinkage was determined for four different combinations of Iowa DOT structural concrete mix proportions and materials. The two mix proportions used were an Iowa DOT D57 (bridge deck mix proportions) and a water reduced modified C4 mix. Three 4"x 4"x 18" beams were made for each mix. After moist curing for three days, all beams were maintained in laboratory dry air and the length and weight were measured at 73°F ± 3°F. The temperature was cycled on alternate days from 73°F to 90°F through four months. From four months through six months, the temperature was cycled one day at 73°F and six days at 130°F. It took approximately six months for the concrete to reach a dry condition with these temperatures. The total drying shrinkage for the four mixes varied from .0106 in. to .0133 in. with an average of .0120 in. The rate of shrinkage was approximately .014% shrinkage per 1% moisture loss for all four mixes. The rate and total shrinkage for all four mixes was very similar and did not seem to depend on the type of coarse aggregate or the use of a retarder.

Randomized controlled study demonstrating failure of LPV/r monotherapy in HIV: the role of compartment and CD4-nadir.

BACKGROUND: Long-term side-effects and cost of HIV treatment motivate the development of simplified maintenance. Monotherapy with ritonavir-boosted lopinavir (LPV/r-MT) is the most widely studied strategy. However, efficacy of LPV/r-MT in compartments remains to be shown. METHODS: Randomized controlled open-label trial comparing LPV/r-MT with continued treatment for 48 weeks in treated patients with fully suppressed viral load. The primary endpoint was treatment failure in the central nervous system [cerebrospinal fluid (CSF)] and/or genital tract. Treatment failure in blood was defined as two consecutive HIV RNA levels more than 400 copies/ml. RESULTS: The trial was prematurely stopped when six patients on monotherapy (none in continued treatment-arm) demonstrated a viral failure in blood. At study termination, 60 patients were included, 29 randomized to monotherapy and 13 additional patients switched from continued treatment to monotherapy after 48 weeks. All failures occurred in patients with a nadir CD4 cell count below 200/microl and within the first 24 weeks of monotherapy. Among failing patients, all five patients with a lumbar puncture had an elevated HIV RNA load in CSF and four of six had neurological symptoms. Viral load was fully resuppressed in all failing patients after resumption of the original combination therapy. No drug resistant virus was found. The only predictor of failure was low nadir CD4 cell count (P < 0.02). CONCLUSION: Maintenance of HIV therapy with LPV/r alone should not be recommended as a standard strategy; particularly not in patients with a CD4 cell count nadir less than 200/microl. Further studies are warranted to elucidate the role of the central nervous system compartment in monotherapy-failure.

Biofuel Co-Product Uses for Pavement Geo-Materials Stabilization, TR-582, 2010

The production and use of biofuels has increased in the present context of sustainable development. Biofuel production from plant biomass produces not only biofuel or ethanol but also co-products containing lignin, modified lignin, and lignin derivatives. This research investigated the utilization of lignin-containing biofuel co-products (BCPs) in pavement soil stabilization as a new application area. Laboratory tests were conducted to evaluate the performance and the moisture susceptibility of two types of BCP-treated soil samples compared to the performance of untreated and traditional stabilizer-treated (fly ash) soil samples. The two types of BCPs investigated were (1) a liquid type with higher lignin content (co-product A) and (b) a powder type with lower lignin content (co-product B). Various additive combinations (co-product A and fly ash, co-products A and B, etc.) were also evaluated as alternatives to stand-alone co-products. Test results indicate that BCPs are effective in stabilizing the Iowa Class 10 soil classified as CL or A-6(8) and have excellent resistance to moisture degradation. Strengths and moisture resistance in comparison to traditional additives (fly ash) could be obtained through the use of combined additives (co-product A + fly ash; co-product A + co-product B). Utilizing BCPs as a soil stabilizer appears to be one of the many viable answers to the profitability of the bio-based products and the bioenergy business. Future research is needed to evaluate the freeze-thaw durability and for resilient modulus characterization of BCP-modified layers for a variety of pavement subgrade and base soil types. In addition, the long-term performance of these BCPs should be evaluated under actual field conditions and traffic loadings. Innovative uses of BCP in pavement-related applications could not only provide additional revenue streams to improve the economics of biorefineries, but could also serve to establish green road infrastructures.

The ADVANCE trial: clarifying the role of perindopril/indapamide fixed-dose combination in the reduction of cardiovascular and renal events in patients with diabetes mellitus.

Patients with type 2 diabetes mellitus exhibit a marked increase in cardiovascular and renal risk. A number of interventional trials have shown that these patients benefit greatly from aggressive BP lowering, especially when the drug regimen comprises an inhibitor of the renin-angiotensin system. The results of the placebo-controlled ADVANCE (Action in Diabetes and Vascular disease: PreterAx and DiamicroN MR Controlled Evaluation) trial, conducted in patients with type 2 diabetes, are exemplary in this respect. The systematic use of a fixed-dose combination containing the ACE inhibitor perindopril and the diuretic indapamide afforded substantial protection against cardiovascular mortality and myocardial infarction, while providing important renoprotection, reducing the development of micro- and macroalbuminuria, and allowing regression of nephropathy. The beneficial effects were obtained regardless of baseline BP and whether or not the patients were receiving antihypertensive therapy.

Insights into the Design and Characteristics of the Sedimentation Process at Multi-Barrel Culverts in Iowa, TR-596, 2010

The present study is an integral part of a broader study focused on the design and implementation of self-cleaning culverts, i.e., configurations that prevent the formation of sediment deposits after culvert construction or cleaning. Sediment deposition at culverts is influenced by many factors, including the size and characteristics of material of which the channel is composed, the hydraulic characteristics generated under different hydrology events, the culvert geometry design, channel transition design, and the vegetation around the channel. The multitude of combinations produced by this set of variables makes the investigation of practical situations a complex undertaking. In addition to the considerations above, the field and analytical observations have revealed flow complexities affecting the flow and sediment transport through culverts that further increase the dimensions of the investigation. The flow complexities investigated in this study entail: flow non-uniformity in the areas of transition to and from the culvert, flow unsteadiness due to the flood wave propagation through the channel, and the asynchronous correlation between the flow and sediment hydrographs resulting from storm events. To date, the literature contains no systematic studies on sediment transport through multi-box culverts or investigations on the adverse effects of sediment deposition at culverts. Moreover, there is limited knowledge about the non-uniform, unsteady sediment transport in channels of variable geometry. Furthermore, there are few readily useable (inexpensive and practical) numerical models that can reliably simulate flow and sediment transport in such complex situations. Given the current state of knowledge, the main goal of the present study is to investigate the above flow complexities in order to provide the needed insights for a series of ongoing culvert studies. The research was phased so that field observations were conducted first to understand the culvert behavior in Iowa landscape. Modeling through complementary hydraulic model and numerical experiments was subsequently carried out to gain the practical knowledge for the development of the self-cleaning culvert designs.

Validation of microsatellite markers for assisted selection of soybean resistance to cyst nematode races 3 and 14

The objective of this work was to validate microsatellite markers associated with resistance to soybean cyst nematode (Heterodera glycines Ichinohe) races 3 and 14, in soybean (Glycine max L.) genotypes, for use in marker-assisted selection (MAS) programs. Microsatellites of soybean linkage groups A2, D2 and G were tested in two populations, and their selection efficiencies were determined. The populations were 65 F2:3 families from Msoy8001 (resistant) x Conquista (susceptible) cross, and 66 F2:3 families of S5995 (resistant) x Renascença (susceptible) cross, evaluated for resistance to races 3 and 14, respectively. Families with female index up to 30% were considered moderately resistant. Markers of A2 and G linkage groups were associated with resistance to race 3. Markers Satt309 and GMENOD2B explained the greatest proportion of phenotypic variance in the different groups. The combinations Satt309+GMENOD2B and Satt309+Satt187 presented 100% selection efficiency. Resistance to race 14 was associated with markers of G linkage group, and selection efficiency in the Satt309+Satt356 combination was 100%. The selection differential obtained by phenotypic and marker assisted selection showed that both can result in similar gains.

Seal properties of TachoSil: in vitro hemodynamic measurements.

Fibrin glue products and collagen patches are frequently used as a sealing product, preventing surgical side bleedings. This is especially true in the field of cardiovascular surgery, where increasing numbers of patients are being operated with antiplatelet and anticoagulation therapy. The aim of this report was, in an in vitro hemodynamic setting, to examine the sealant properties of the TachoSil (Nycomed Pharma, Linz, Austria) patch. Burst pressure and normal force of 15 TachoSil sealed defects were measured. This was determined in a closed hydraulic system. Mean burst pressure load for a 5-mm defect was 69+/-11.4 mmHg; for a 7-mm defect was 63+/-16 mmHg; and, 62+/-16 mmHg for the defect with a diameter of 10 mm (P>0.05). The mean calculated normal force was as follows: 0.91+/-0.15 N for the 5 mm defect, 6.5+/-1.6 N for the 7 mm, and 8.1+/-0.75 N for the 10 mm defect. The TachoSil patch has the capability to seal small defects. However, at the larger defects the seal character was significantly reduced. These results suggest that the device may be a good alternative for hemostasis for small defects. The capacity to curtail or stop hemorrhage at the larger defects is unlikely.

Moeglichkeiten der systemischen Therapie im metastasierten Stadium [Treatment options for chemotherapy in metastatic gastric cancer]

Die Ergebnisse mehrerer, in letzter Zeit publizierter Phase-III-Studien haben die therapeutischen Möglichkeiten in der Behandlung des metastasierten Magenkarzinoms deutlich erweitert. Die Dauerinfusion von 5-Fluorouracil (5-FU) kann ohne Verlust an Wirkung durch Capecitabin ersetzt werden, ebenso wie Cisplatin durch Oxaliplatin. Nach den Ergebnissen der REAL-2-Studie zeigt die Kombination aus Epirubicin, Oxaliplatin und Capecitabin (EOX) eine Verbesserung des Gesamtüberlebens (9,9 vs. 11,2 Monate; HR 0,8) im Vergleich zu Epirubicin, Cisplatin und 5-FU (ECF). Die Frage, ob in der First-Line-Therapie eine Dreifachkombination oder eine Zweifachkombination eingesetzt werden sollte, ist allerdings weiterhin umstritten. Die Kombination aus Irinotecan und 5-FU stellt für solche Patienten, bei denen aufgrund von Komorbiditäten eine platinfreie Therapie bevorzugt wird, eine Alternative zur Kombination Cisplatin/5-FU dar. Docetaxel, 5-FU und Cisplatin (DCF) hat sich bezüglich des Überlebens in einer randomisierten Phase-III-Studie als statistisch signifikant überlegen erwiesen, allerdings besteht eine ausgeprägte hämatologische Toxizität, welche die Anwendbarkeit insbesondere bei den häufig älteren Patienten mit einem Magenkarzinom limitiert. Randomisierte Phase-III-Studien zum Vergleich von DCF mit anderen Dreierkombinationen, wie z. B. EOX, stehen aus. Recently published results from several phase III trials have significantly increased the therapeutic options in the treatment of metastatic stomach cancer: The continuous infusion of 5-FU can be replaced by capecitabine, and cisplatin can be replaced by oxaliplatin in both cases without impairing efficacy. According to the results of the REAL-2 trial, the combination of epirubicin, oxaliplatin and capecitabine (EOX) achieved superior results for overall survival compared to epirubicin, cisplatin und 5-FU (ECF) (9.9 versus 11.2 months, HR 0.8). However, the question of whether an optimal first line therapy should include a triplet regimen or the sequential use of doublets is a matter of debate. The combination of irinotecan and 5-FU may serve as an alternative to platinum-containing regimens in patients where, due to co-morbidity, a platinum-free regimen is preferred. The 3-drug combination of docetaxel, 5-FU and cisplatin (DCF) demonstrated a statistically significant survival benefit compared to the 2-drug combination of 5-FU and cisplatin in a randomized phase III trial, although results were limited by a particularly significant hematological toxicity, which prevents its application in the large group of elderly patients with gastric cancer. Direct randomized phase III comparisons of DCF with other 3-drug combinations, such as EOX are still missing.

Combining ability and heterosis in common bean cultivars

The objective of this work was to determine the combining ability and heterosis, for productivity and yield components, in diallel hybrids derived from crossings between BRSMG-Talismã, IPR Uirapuru, FT Soberano, BRS Campeiro, IAC Tybatã, and IPR Juriti parent cultivars. Fifteen hybrids were generated from diallel crosses, excluding reciprocals. The general and specific combining abilities were significant for plant height, number of pods per plant, number of seeds per plant, number of seeds per pod, 50-seed weight, and grain yield, indicating the occurrence of both additive and nonadditive genetic effects. The best strategy to be adopted is the use of BRS Campeiro, FT Soberano and BRSMG-Talismã cultivars in common bean breeding programs involving selection. The most promising combinations were 'IPR Uirapuru' x 'IAC Tybatã', 'IPR Uirapuru' x 'FT Soberano', 'BRS Campeiro' x 'IPR Juriti', and 'BRS Campeiro' x 'IAC Tybatã'. The parents of these hybrids presented high estimates of specific combining abilities. Hybridization of cultivars belonging to distinguished commercial groups propitiates higher heterosis values in the segregant population.

In vitro activities of tigecycline combined with other antimicrobials against multiresistant gram-positive and gram-negative pathogens.

OBJECTIVES: To test the activity of tigecycline combined with 16 antimicrobials in vitro against 22 gram-positive and 55 gram-negative clinical isolates. METHODS: Antibiotic interactions were determined by chequerboard and time-kill methods. RESULTS: By chequerboard, of 891 organism-drug interactions tested, 97 (11%) were synergistic, 793 (89%) were indifferent and 1 (0.1%) was antagonistic. Among gram-positive pathogens, most synergisms occurred against Enterococcus spp. (7/11 isolates) with the tigecycline/rifampicin combination. No antagonism was detected. Among gram-negative organisms, synergism was observed mainly with trimethoprim/sulfamethoxazole against Serratia marcescens (5/5 isolates), Proteus spp. (2/5) and Stenotrophomonas maltophilia (2/5), with aztreonam against S. maltophilia (3/5), with cefepime and imipenem against Enterobacter cloacae (3/5), with ceftazidime against Morganella morganii (3/5), and with ceftriaxone against Klebsiella pneumoniae (3/5). The only case of antagonism occurred against one S. marcescens with the tigecycline/imipenem combination. Selected time-kill assays confirmed the bacteriostatic interactions observed by the chequerboard method. Moreover, they revealed a bactericidal synergism of tigecycline with piperacillin/tazobactam against one penicillin-resistant Streptococcus pneumoniae and with amikacin against Proteus vulgaris. CONCLUSIONS: Combinations of tigecycline with other antimicrobials produce primarily an indifferent response. Specific synergisms, especially against enterococci and problematic gram-negative isolates, might be worth investigating in in vitro models and/or in animal models simulating the human environment.