Produção de lipase por Fusarium oxysporum em fermentação em estado sólido e sua aplicação em reações de síntese de ésteres de biodiesel

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Produção de biodiesel etílico com uso de lipases extracelulares de fungos termofílicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nutrient intake and digestibility of the lipid residue of biodiesel from palm oil in sheep

ABSTRACT: The objective of this study was to evaluate the effect of inclusion of lipid residue of biodiesel originated in the processing of palm oil (Elaeis guineensis) in the diet on the digestibility of feedlot lambs. Twenty-five crossbred male castrated lambs, weighing 20±1.61 kg, were distributed in randomized blocks with five treatments and five replications. The experimental period lasted 22 days; 15 for diet adaptation, 2 for the adaptation to the indicator LIPE (lignin from Eucalyptus grandis isolated, purified and enriched, UFMG, Minas Gerais) and 5 for fecal sampling. Diets were formulated with 64% concentrate based on corn and soybean meal, 31% Massai grass (Panicum maximum cv. Massai) hay and 5% lipid supplementation from increasing levels of substitution of 0, 25, 50, 75 and 100% of palm oil for biodiesel oil from palm residue. The lambs were offered two meals a day, at 7h00 and 16h00. There was linear effect of inclusion of the residue from palm oil biodiesel on dry matter intake. There was no change in digestibility of nutrients except for ether extract. The use of biodiesel from palm oil residue up to 100% replacement for the lipid supplementation of sheep positively influences the consumption without altering the digestibility of nutrients.

Resíduo lipídico da produção de biodiesel proveniente do óleo de dendê (elaeis guineensis) na alimentação de ovinos - digestibilidade aparente e comportamento ingestivo

Este estudo buscou avaliar o efeito da inclusão de resíduo do processamento do biodiesel do óleo de dendê (c) na dieta, sobre a digestibilidade e comportamento ingestivo de cordeiros confinados. Vinte e cinco ovinos machos, sem raça definida, castrados, com peso vivo médio de 20kg, submetidos a dietas com 5% de suplementação lipídica proveniente de níveis crescentes de substituição 0, 25, 50, 75 e 100% de óleo de dendê por resíduo do biodiesel do dendê. Os animais foram distribuídos em delineamento de blocos ao acaso, sendo o peso dos animais os blocos, com cinco tratamentos e cinco repetições. O período experimental foi de vinte e dois dias, com quinze dias de adaptação às dietas, dois dias de adaptação ao indicador externo de digestibilidade, Lignina Purificada e Enriquecida (LIPE), e cinco dias de coletas fecais. As dietas experimentais consistiram de 31% de feno de capim massai (Panicum maximum cv. Massai); 64% de concentrado, a base de milho e farelo de soja; e 5% de fonte lipídica (óleo de dendê e/ou resíduo do biodiesel). O arraçoamento foi dividido em duas refeições diárias, pela manhã (7h) e a tarde (16h). O comportamento ingestivo foi determinado mediante observação visual, ocorrido durante 24 horas, a intervalos de 5 minutos, para se determinar o tempo despendido em ingestão, ruminação e ócio. A utilização do resíduo do biodiesel do dendê como fonte lipídica apresentou resultados significativos de consumos de matéria seca (MS), matéria orgânica (MO), extrato etéreo (EE) e proteína bruta (PB), bem como o coeficiente de digestibilidade de EE. Os níveis crescentes de substituição de resíduo do biodiesel não influenciaram (P>0,05) nos tempos despendidos em alimentação, ruminação e ócio. Assim como não alterou as eficiências de ingestão e ruminação da matéria seca (MS) e fibra em detergente neutro (FDN). Não houve efeito da inclusão de resíduo do biodiesel sobre os consumos e coeficientes de digestibilidade da FDN e FDA.

Comparison of lipase production on crambe oil and meal by Fusarium sp (Gibberella fujikuroi complex)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Lipases microbianas: produção, propriedades e aplicações biotecnológicas

Conselho Nacional de Desenvolvimento Científico e Tecnológico(CNPq)

PHYSICO-CHEMICAL, SPECTROSCOPICAL AND THERMAL CHARACTERIZATION OF BIODIESEL OBTAINED BY ENZYMATIC ROUTE AS A TOOL TO SELECT THE MOST EFFICIENT IMMOBILIZED LIPASE

Two microbial lipases from Burkholderia cepacia and Pseudomonas fluorescens were evaluated as catalysts for the enzymatic transesterification of beef tallow with ethanol and the most efficient lipase source was selected by taking into account the properties of the product to be used as fuel. Both lipases were immobilized on an epoxy silica-polyvinyl alcohol composite by covalent immobilization and used to perform the reactions under the following operational conditions: beef tallow-to-ethanol molar ratio of 1:9, 45 degrees C and 400 units of enzymatic activity per gram of fat. Products, characterized using Fourier Transform Infrared spectroscopy (FTIR), viscosimetry, thermogravimetry and H-1 NMR spectroscopy, suggested that the biodiesel sample obtained in the reaction catalyzed by Burkholderia cepacia lipase has the best set of properties for fuel usage.

Imobilização do fungo Penicillium citrinum CBMAI 1186 e lipase de Pseudomonas fluorescens em biopolímeros para aplicações em biocatálise

Diversos biomateriais podem ser aplicados como suportes na imobilização de células totais de fungos filamentosos ou enzimas isoladas, visando a manutenção e o prolongamento da atividade enzimática em processos biocatalíticos. Exemplos promissores de biomateriais são a fibroína da seda e o alginato de sódio. A fibroína é um material protéico com alta estabilidade térmica, elasticidade, resistência à tensão, não sofre ataque microbiano, baixo custo de purificação e alta tenacidade, o alginato é um biopolímero versátil, devido a suas propriedades gelificantes em soluções aquosas. Assim, neste trabalho empregou-se micélios do fungo derivado de ambiente marinho, Penicillium citrinum CBMAI 1186, livres e imobilizados em biopolímeros (fibra de algodão, fibra de fibroína da seda e fibra de paina) na biorredução quimiosseletiva, regiosseletiva e enantiosseletiva da ligação α,β-C=C de enonas α,β-, α,β,γ,δ- e di-α,β-insaturadas previamente sintetizados pela a reação de condensação aldólica. Foi possível a utilização do fungo P. citrinum CBMAI 1186 na redução quimiosseletiva, regiosseletiva e enantiosseletiva da ligação dupla carbono-carbono de sistemas α,β-insaturados. A imobilização do fungo P. citrinum CBMAI 1186 em biopolímeros (algodão, fibroína da seda, paina e quitosana) permitiu a prolongamento da atividade celular do fungo. O protocolo desenvolvido foi capaz de obter compostos até então descritos apenas por síntese clássica. Também foi realizado reações de resolução enzimática de derivados de haloidrinas por diferentes lipases microbianas de: Pseudomonas fluorescens, Candida cylindracea, Rhizopus niveus e Aspergillus niger. A lipase de P. fluorescens foi imobilizada em esferas de fibroína do bicho da seda (método 1, via adsorção) e em blenda com alginato de cálcio (método 2, via encapsulação) em diferentes condições, tais como, variação de solvente, variação da quantidade de enzima imobilizada e tempo de reação. As condições otimizadas foram empregadas em diferentes haloidrinas, rendendo elevados excessos enantioméricos (ee > 99%) e alta razão enanantiomérica (E > 200) para os produtos acetilados. Foi possível desenvolver um protocolo simples, barato e prático para a síntese enantiosseletiva de haloidrina reforçando a versatilidade da fibroína e do alginato como suportes de imobilização para catalisadores heterogêneos. Também foi possível utilizar a lipase imobilizada (método 2) na reação de transesterificação para obtenção do biodiesel etílico. As melhores condições para o bom funcionamento do biocatalisador foram: 30% do biocatalisador, 20% de n-hexano, relação óleo e etanol de 1:4 a 32 ºC por 48 h em agitação magnética (400 rpm). Essas condições permitiram a formação de 42% de rendimento do biodiesel etílico. O biocatalisador apresentou algumas limitações reacionais, tais como, fragilidade frente a elevadas temperaturas (> 32 ºC) e prolongado tempo de agitação magnética. Porém, permaneceu apto no meio por 4 ciclos consecutivas. Conclui-se que os biomateriais (fibroína, alginato e quitosana) podem ser utilizados como alternativas versáteis na imobilização de micélios de fungos filamentoso e de enzimas isoladas para aplicações em biocatalíticas.

Optimization of lipase production from yeasts strains isolated from olive mil wastewater

Dissertação submetida à Universidade de Lisboa, Faculdade de Ciências para a obtenção do Grau de Mestre em Microbiologia Aplicada.

Optimisation of bio-oil extraction process from Beauty Leaf (Calophyllum inophyllum) oil seed as a second generation biodiesel source

The Beauty Leaf tree (Calophyllum inophyllum) is a potential source of non-edible vegetable oil for producing future generation biodiesel because of its ability to grow in a wide range of climate conditions, easy cultivation, high fruit production rate, and the high oil content in the seed. This plant naturally occurs in the coastal areas of Queensland and the Northern Territory in Australia, and is also widespread in south-east Asia, India and Sri Lanka. Although Beauty Leaf is traditionally used as a source of timber and orientation plant, its potential as a source of second generation biodiesel is yet to be exploited. In this study, the extraction process from the Beauty Leaf oil seed has been optimised in terms of seed preparation, moisture content and oil extraction methods. The two methods that have been considered to extract oil from the seed kernel are mechanical oil extraction using an electric powered screw press, and chemical oil extraction using n-hexane as an oil solvent. The study found that seed preparation has a significant impact on oil yields, especially in the screw press extraction method. Kernels prepared to 15% moisture content provided the highest oil yields for both extraction methods. Mechanical extraction using the screw press can produce oil from correctly prepared product at a low cost, however overall this method is ineffective with relatively low oil yields. Chemical extraction was found to be a very effective method for oil extraction for its consistence performance and high oil yield, but cost of production was relatively higher due to the high cost of solvent. However, a solvent recycle system can be implemented to reduce the production cost of Beauty Leaf biodiesel. The findings of this study are expected to serve as the basis from which industrial scale biodiesel production from Beauty Leaf can be made.

The influence of oxygenated organic aerosols (OOA) on the oxidative potential of diesel and biodiesel particulate matter

Generally, the magnitude of pollutant emissions from diesel engines running on biodiesel fuel is ultimately coupled to the structure of respective molecules that constitutes the fuel. Previous studies demonstrated the relationship between organic fraction of PM and its oxidative potential. Herein, emissions from a diesel engine running on different biofuels were analysed in more detail to explore the role different organic fractions play in the measured oxidative potential. In this work, a more detailed chemical analysis of biofuel PM was undertaken using a compact Time of Flight Aerosol Mass Spectrometer (c-ToF AMS). This enabled a better identification of the different organic fractions that contribute to the overall measured oxidative potentials. The concentration of reactive oxygen species (ROS) was measured using a profluorescent nitroxide molecular probe 9-(1,1,3,3-tetramethylisoindolin-2-yloxyl-5-ethynyl)-10-(phenylethynyl)anthracene (BPEAnit). Therefore the oxidative potential of the PM, measured through the ROS content, although proportional to the total organic content in certain cases shows a much higher correlation with the oxygenated organic fraction as measured by the c-ToF AMS. This highlights the importance of knowing the surface chemistry of particles for assessing their health impacts. It also sheds light onto new aspects of particulate emissions that should be taken into account when establishing relevant metrics for assessing health implications of replacing diesel with alternative fuels.

Hydrothermal liquefaction of bagasse using ethanol and black liquor as solvents

The objective of this study was to examine the hydrothermal liquefaction of sugarcane bagasse using ethanol and black liquor (BL) in a pilot scale. Combinations of co-solvents (ethanol/ water, ethanol/BL) were studied at various concentrations and reaction conditions. The maximum oil yield of 61% was achieved with a reaction temperature of 300 °C for 30 min and using pure BL as a solvent, while the highest higher heating value (HHV) was obtained from a 50:50 ethanol-BL mixture. The oils contained alcohols, esters, phenolic compounds, aromatics, and heterocyclics. The O/C and H/C ratios of the oil were comparable with traditional biodiesel and commercial diesel. Although this study showed there are some improvements to be made to improve the chemical composition, the approach has potential for large-scale production of a substitute for fossil-fuel-based diesel.

Fabrication and characterization of plasma polymer thin films from monoterpene alcohols for applications in organic electronics and biotechnology

After more than twenty years of basic and applied research, the use of nanotechnology in the design and manufacture of nanoscale materials is rapidly increasing, particularly in commercial applications that span from electronics across renewable energy areas, and biomedical devices. Novel polymers are attracting significant attention for they promise to provide a low−cost high−performance alternative to existing materials. Furthermore, these polymers have the potential to overcome limitations imposed by currently available materials thus enabling the development of new technologies and applications that are currently beyond our reach. This work focuses on the development of a range of new low−cost environmentally−friendly polymer materials for applications in areas of organic (flexible) electronics, optics, and biomaterials. The choice of the monomer reflects the environmentally−conscious focus of this project. Terpinen−4−ol is a major constituent of Australian grown Melaleuca alternifolia (tea tree) oil, attributed with the oil's antimicrobial and anti−inflammatory properties. Plasma polymerisation was chosen as a deposition technique for it requires minimal use of harmful chemicals and produces no hazardous by−products. Polymer thin films were fabricated under varied process conditions to attain materials with distinct physico−chemical, optoelectrical, biological and degradation characteristics. The resultant materials, named polyterpenol, were extensively characterised using a number of well−accepted and novel techniques, and their fundamental properties were defined. Polyterpenol films were demonstrated to be hydrocarbon rich, with variable content of oxygen moieties, primarily in the form of hydroxyl and carboxyl functionalities. The level of preservation of original monomer functionality was shown to be strongly dependent on the deposition energy, with higher applied power increasing the molecular fragmentation and substrate temperature. Polyterpenol water contact angle contact angle increased from 62.7° for the 10 W samples to 76.3° for the films deposited at 100 W. Polymers were determined to resist solubilisation by water, due to the extensive intermolecular and intramolecular hydrogen bonds present, and other solvents commonly employed in electronics and biomedical processing. Independent of deposition power, the surface topography of the polymers was shown to be smooth (Rq <0.5 nm), uniform and defect free. Hardness of polyterpenol coatings increased from 0.33 GPa for 10 W to 0.51 GPa for 100 W (at 500 μN load). Coatings deposited at higher input RF powers showed less mechanical deformation during nanoscratch testing, with no considerable damage, cracking or delamination observed. Independent of the substrate, the quality of film adhesion improved with RF power, suggesting these coatings are likely to be more stable and less susceptible to wear. Independent of fabrication conditions, polyterpenol thin films were optically transparent, with refractive index approximating that of glass. Refractive index increased slightly with deposition power, from 1.54 (10 W) to 1.56 (100 W) at 500 nm. The optical band gap values declined with increasing power, from 2.95 eV to 2.64 eV, placing the material within the range for semiconductors. Introduction of iodine impurity reduced the band gap of polyterpenol, from 2.8 eV to 1.64 eV, by extending the density of states more into the visible region of the electromagnetic spectrum. Doping decreased the transparency and increased the refractive index from 1.54 to 1.70 (at 500 nm). At optical frequencies, the real part of permittivity (k) was determined to be between 2.34 and 2.65, indicating a potential low-k material. These permittivity values were confirmed at microwave frequencies, where permittivity increased with input RF energy – from 2.32 to 2.53 (at 10 GHz ) and from 2.65 to 2.83 (at 20 GHz). At low frequencies, the dielectric constant was determined from current−voltage characteristics of Al−polyterpenol−Al devices. At frequencies below 100 kHz, the dielectric constant varied with RF power, from 3.86 to 4.42 at 1 kHz. For all samples, the resistivity was in order of 10⁸−10⁹ _m (at 6 V), confirming the insulating nature of polyterpenol material. In situ iodine doping was demonstrated to increase the conductivity of polyterpenol, from 5.05 × 10⁻⁸ S/cm to 1.20 × 10⁻⁶ S/cm (at 20 V). Exposed to ambient conditions over extended period of time, polyterpenol thin films were demonstrated to be optically, physically and chemically stable. The bulk of ageing occurred within first 150 h after deposition and was attributed to oxidation and volumetric relaxation. Thermal ageing studies indicated thermal stability increased for the films manufactured at higher RF powers, with degradation onset temperature associated with weight loss shifting from 150 ºC to 205 ºC for 10 W and 100 W polyterpenol, respectively. Annealing the films to 405 °C resulted in full dissociation of the polymer, with minimal residue. Given the outcomes of the fundamental characterisation, a number of potential applications for polyterpenol have been identified. Flexibility, tunable permittivity and loss tangent properties of polyterpenol suggest the material can be used as an insulating layer in plastic electronics. Implementation of polyterpenol as a surface modification of the gate insulator in pentacene-based Field Effect Transistor resulted in significant improvements, shifting the threshold voltage from + 20 V to –3 V, enhancing the effective mobility from 0.012 to 0.021 cm²/Vs, and improving the switching property of the device from 10⁷ to 10⁴. Polyterpenol was demonstrated to have a hole transport electron blocking property, with potential applications in many organic devices, such as organic light emitting diodes. Encapsulation of biomedical devices is also proposed, given that under favourable conditions, the original chemical and biological functionality of terpinen−4−ol molecule can be preserved. Films deposited at low RF power were shown to successfully prevent adhesion and retention of several important human pathogens, including P. aeruginosa, S. aureus, and S. epidermidis, whereas films deposited at higher RF power promoted bacterial cell adhesion and biofilm formation. Preliminary investigations into in vitro biocompatibility of polyterpenol demonstrated the coating to be non−toxic for several types of eukaryotic cells, including Balb/c mice macrophage and human monocyte type (HTP−1 non-adherent) cells. Applied to magnesium substrates, polyterpenol encapsulating layer significantly slowed down in vitro biodegradation of the metal, thus increasing the viability and growth of HTP−1 cells. Recently, applied to varied nanostructured titanium surfaces, polyterpenol thin films successfully reduced attachment, growth, and viability of P. aeruginosa and S. aureus.

Superhydrophobic fabrics for oil-water separation based on the metal organic charge transfer complex CuTCNAQ

This work reports on the fabrication of a superhydrophobic nylon textile based on the organic charge transfer complex CuTCNAQ (TCNAQ = 11,11,12,12-tetracyanoanthraquinodimethane). The nylon fabric that is metallized with copper undergoes a spontaneous chemical reaction with TCNAQ dissolved in acetonitrile to form nanorods of CuTCNAQ that are intertwined over the entire surface of the fabric. This creates the necessary micro and nanoscale roughness that is required for the Cassie-Baxter state thereby achieving a superhydrophobic/superoleophilic surface without the need for a fluorinated surface. The material is characterised with SEM, FT-IR and XPS spectroscopy and investigated for its ability to separate oil and water in two modes, namely under gravity and as an absorbent. It is found that the fabric can separate dichloromethane, olive oil and crude oil from water and in fact reduce the water content of the oil during the separation process. The fabric is reusable and tolerant to conditions such as seawater, hydrochloric acid and extensive time periods on the shelf. Given that CuTCNAQ is a copper based semiconductor may also open up the possibility of other applications in areas such as photocatalysis and antibacterial applications.