980 resultados para Agricultura alternativa


Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study deals with environmental issues on agriculture. In this context, the aim of this study is investigate factors able to influence the environmental conscientization of students of a agricultural technicals school about the aspects and environmental impacts related to the agricultural productive process. Besides, the used methodology on this work was to the application of a questionnaire based in Likert-kind scale with closed questions, they are constituted of variables which consisted of groups denominated perception, attitude, communitarian sense, commitment, sel-consciousness, knowledge and student profile. Like data analysis way was used descriptive analysis and chi-square to check the association significance between the perception variable with the variable ones of cited groups. The results obtained show that the environmental knowledge variable was one of the that showed high significance when it associated to the variables of perception group. The students with environmental knowledge showed high consideration that the production activities on agriculture cause large adverse impacts on environment. After the identification of some factors of environmental conscientization are shown recommendations which school must prepare techniques in aware high school of agricultural sciences with the environmental problems which be able to apply sustainable technologies on agriculture instead of traditional ones through the benefit of environment

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O experimento desenvolveu-se no Setor de Caprinocultura da FMVZ - UNESP - Campus de Botucatu, com o objetivo de estudar a influência da somatotropina bovina recombinante (rbST - nome comercial: Boostin 250 mg) na produção de leite, nos constituintes do leite, peso e escore de condição corporal de cabras durante o ciclo lactacional. Foram usadas 21 cabras da raça Parda Alpina, com idade entre 1 ½ e 4 anos, distribuídas aleatoriamente entre três tratamentos de sete animais cada: controle (T1 - sem rbST); completo, safra e entressafra (T2 - rbST após 45 dias de lactação); e apenas entressafra (T3 - rbST após 154 dias de lactação). Os animais dos três tratamentos receberam a mesma alimentação, que diferiu apenas na quantidade de concentrado, ajustada de acordo com a produção de leite dos animais. Não se observou aumento na produção de leite dos animais tratados, mas a persistência da lactação foi maior nestes animais. Não se observou diferença entre animais controles e tratados quanto aos constituintes do leite (densidade, gordura, EST, lactose e proteína). O peso e o índice de condição corporal também não apresentaram diferença significativa entre animais tratados e controle.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O babaçu é uma planta de importância capital na economia de subsistência do norte do Brasil. Sua configuração sócio-ambiental o torna destaque na situação regional amazônica, onde os produtos advindos do babaçu possibilitam renda para a camada mais pobre da população amazônica, além da questão ambiental que é conotada à preservação dos babaçuais naturais. Um dos gargalos técnicos da produção do babaçu, em especial visando a extração do óleo de babaçu, é a colheita feita de forma manual e no sistema extrativista. O objetivo deste trabalho é propor o conceito de uma colhedora de babaçu moto-mecanizada, capaz de trabalhar em cultivos artificiais, assim como em florestas naturais. Foi utilizada a metodologia de projeto da matriz morfológica, onde foram elencadas as possíveis combinações de mecanismos e elementos para uma colhedora de babaçu. Como resultado foi obtido um conceito teórico, sendo concluída a viabilidade técnica de tal projeto, em estudos futuros pretende-se desenvolver estudos de viabilidade técnica detalhados, assim como estudos de viabilidade econômica.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O babaçu (Orbignya phalerata) é uma típica palmeira das matas de transição dos ecossistemas Amazônia/Cerrado e Amazônia/Caatinga, sendo de grande importância econômica, social e ambiental nestas regiões. Os produtos advindos dos babaçuais possibilitam renda para uma das camadas mais pobres da região amazônica e um dos entraves para a obtenção eficiente destes produtos é a colheita dos cocos de babaçu, que atualmente se faz no sistema extrativista. O objetivo deste trabalho foi realizar o desenvolvimento e projeto de uma colhedora de babaçu adaptável ao ambiente de trabalho da agricultura familiar e as características das matas de transição amazônicas. Para tal foram realizados estudos de literatura que nortearam as decisões e simplificações de projeto, assim como foram realizados os cálculos e desenhos da nova colhedora. O projeto foi realizado através de ferramentas de engenharia que apresentaram como resultados o memorial de cálculo que descreve o caminho técnico para o dimensionamento dos elementos constituintes da colhedora e a partir destes os desenhos detalhados dos elementos da nova máquina. Pelos desenhos detalhados suas considerações e decisões concluí-se que a colhedora de babaçu apresenta-se passível de ser construída com materiais nacionais de baixo custo, além de fácil operação, manutenção e com mínimo efeito sobre os babaçuais naturais.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The production of the red pottery brick, made traditionally with clay, is a technique that is already stabled. However, in spite of the little complexity that involves the conventional process of these bricks production, it are exposed to many problems that begin in the fase of exploration of the mines, the problems get worse because of the lack of the clay's characterization, and they continue through the steps of the dough preparation, conformation of the products, the drying and the burning process. The wastefulness is shown and so is the low quality of the material produced. Among other factors, the high use of energy in the burning makes the cost of this material inaccessible to the low income consumer. Besides this, the destruction of the environment around the mines and the use of native vegetation to produce wood - the most used fuel in the pottery industry - make serious environmental damage. The production technique of a new type of simple brick (adobe), that has low cost and no environmental damage, can be the viable altemative to lower the cost of this part of the civil construction, and, consequently, in the building of cheaper houses. In this paper, the results of the mechanical resistance of the adobe brick are shown, using in its composition, clay, natural vegetable fibers, cement and plaster in a process that is completely handcrafted and manual. It is intented to make clear that are possible alternatives to be put in practice, with the simple process, using "raw earth" that has been used in the construction of houses in thousands of years, trying to solve these severe problems. Analysis and tests were performed to find results that could prove the possibility of the utilization of this kind of material. Other studies are in progress, and the new researches are necessary to enrich this work, but it stays the certainty that there is potential to produce bricks from adobe, as an alternative that has low cost to civil construction

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Relevância:

20.00% 20.00%

Publicador:

Resumo:

O trabalho teve como objetivo avaliar a tensão superficial estática de soluções aquosas com formulações de óleos minerais e vegetais emulsionáveis utilizados como adjuvantes na agricultura. Os óleos minerais e vegetais, quando adicionados aos produtos fitossanitários, podem imprimir características desejáveis à calda de pulverização, como reduzir a tensão superficial em soluções aquosas, possibilitar maior contato da calda com a superfície vegetal ou reduzir o potencial de deriva durante as pulverizações. Foram testados os seguintes produtos comerciais: óleos minerais (Assist, Attach, Dytrol, Iharol, Mineral Oil, Spinner, Sunspray-E e Triona) e óleos vegetais (Agrex'oil Vegetal, Crop Oil, Natur'l Óleo, Óleo Vegetal Nortox e Veget Oil), todos com registro de uso na agricultura. A tensão superficial das soluções aquosas foi avaliada em 11 concentrações para cada produto (0,025; 0,05; 0,1; 0,25; 0,5; 0,75; 1,0; 1,5; 2,0; 2,5 e 3,0% v/v). Essa propriedade dos óleos minerais e dos óleos vegetais foi estimada medindo-se a massa das gotas formadas na extremidade de uma bureta. Ao conjunto de dados obtidos para cada produto, na avaliação da tensão superficial, foram determinadas as análises de variância e de regressão, ajustando-se os dados ao Modelo de Mitscherlich. Entre os óleos minerais, destacaram-se os produtos: Assist, Dytrol, Iharol e Mineral Oil por apresentarem as menores tensões superficiais mínimas estimadas pelo Modelo, respectivamente, 29,255; 28,442; 26,097 e 28,584 mN m-1. Os óleos vegetais que apresentaram os menores valores de tensão superficial mínima estimados pelo Modelo, foram: Agrex' oil Vegetal (27,716 mN m-1), Natur'l óleo (28,216 mN m-1), Veget Oil (27,308 mN m-1) e Crop Oil (29,964 mN m-1).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The use of tetrazolium testing is recognized in the soybean seed quality control due to the large amount of data which it provides. Although it is considered a quick test, in 1998 an alternative methodology was proposed for the seed preconditioning, which allows 10 hours of time saving in seeds preparation. The objective of this research is to compare the accuracy of the new and the traditional tetrazolium testing. Three soybean seed genotypes were used, Conquista, Garantia and M-soy 8400, all 2000/2001 crop. The seeds were evaluated in relation to germination, evaluated with the traditional (TZt) and the alternative (Tza) tetrazolium test as well as with the accelerated aging performed in two different conditions (45 degrees C 24h(-1) and 45 degrees C 72h(-1)). After aging, the seeds too were submitted to TZt and Tza testing. The experimental design was a randomized blocks, with four replicates the 50 seeds per genotype in every evaluation, with exception only for tetrazolium test, with two replicates. The averages were compared in the Tukey test level of 5% probability. The comparison between the two methodologies in relation to level of vigor (class 1 to 3) and germination potential (class 1 to 5) indicated no statistical discrepancies, for aged non-aged seeds. This, the use of the alternative tetrazolium test is recommend in case a reduced seed preparation time is needed.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The green bean has organoleptic and nutritional characteristics that make it an important food source in tropical regions such as the Northeast of Brazil. It is a cheap source of protein and important for nutrition of rural population contributing significantly in subsistence farming of the families from Brazil s northeast. It is consumed in entire region and together with the dry meat and other products composes the menu of typical restaurants, being characterized as an important product for economy of Northeast. The green bean is consumed freshly harvested and has short cycle, being characterized as a very perishable food, which hampers your market. The drying method is an alternative to increase the lifetime and provide a reduction volume of this product making easier your transportation and storage. However is necessary to search ways of drying which keep the product quality not only from the nutritional standpoint but also organoleptic. Some characteristics may change with the drying process such as the coloring, the rehydration capacity and the grains cooking time. The decrease of drying time or of exposure of the grains to high temperature minimizes the effects related with the product quality loss. Among the techniques used to reduce the drying time and improve some characteristics of the product, stands out the osmotic dehydration, widely used in combined processes such as the pretreatment in drying food. Currently the use of the microwaves has been considered an alternative for drying food. The microwave energy generates heat inside of materials processed and the heating is practically instantaneous, resulting in shorter processing times and product quality higher to that obtained by conventional methods. Considering the importance of the green beans for the Northeast region, the wastefulness of production due to seasonality of the crop and your high perishability, the proposal of this thesis is the study of drying grain by microwaves with and without osmotic pretreatment, focusing on the search of conditions of processes which favor the rehydration of the product preserving your organoleptic characteristics. Based on the analysis of the results of osmotic dehydration and dielectric properties was defined the operating condition to be used in pretreatment of the green bean, with osmotic concentration in saline solution containing 12,5% of sodium chloride, at 40°C for 20 minutes. The drying of green bean by microwave was performed with and without osmotic pretreatment on the optimized condition. The osmotic predehydration favored the additional drying, reducing the process time. The rehydration of dehydrated green bean with and without osmotic pretreatment was accomplished in different temperature conditions and immersion time according to a factorial design 22, with 3 repetitions at the central point. According to results the better condition was obtained with the osmotically pretreated bean and rehydrated at a temperature of 60°C for 90 minutes. Sensory analysis was performed comparing the sample of the green bean in natura and rehydrated in optimized conditions, with and without osmotic pretreatment. All samples showed a good acceptance rate regarding the analyzed attributes (appearance, texture, color, odor and taste), with all values above 70%. Is possible conclude that the drying of green bean by microwave with osmotic pretreatment is feasible both in respect to technical aspects and rehydration rates and sensory quality of the product

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The disposal of sewage sludge is a growing problem face up to management of sanitary sevices. Otherwise, because its making process characteristic, the Ceramic Industry can tolerate the presence of this wastes as raw material. This study has as object to confirm the use of the sewage sluge in the Ceramic Industry like a sustentable alternative for its disposal. Futhermore, this study quests to evaluate the maximum proportion for incorporation of sludge wich result in technically and enviromentally suitable bricks. For found this proportion, the research consisted of (1) making of bricks in full scale, adde up 0%, 5%,10%, 15%, 20%, 25%,30%, 35% e 40% sludge, with size 220x105x45 mm, hand-molded by rammer and baked by industrial kiln; and (2) tecnical and enviromental evaluation of this bricks, according to Brazilian norms. The raw material uses were two distinct clays come from Goianinha/RN and sewage comes from a septic system tank and pumped into tank vehicle, of Natal/RN. The technical evaluation allowed to conclude the addiotion of the sludge brings about signifcant lost of mass and the water absorption grew up according to increase of sludge: every sludge-amended clay bricks absorved more water than control group. Thus, the compressive strength was signicantly decreased because the increase of sludge: bricks with 5% sludge added lost 45% of strength achieved at control group; the bricks made with 10 and 20% lost almost 70% of bigger strength. With up to 25% sludge added to the bricks, the streght decreased over 90%. Concerning heavy metal leaching, the two maximum proportion wich have tecnical approval, it means bricks sludge added with 15 and 20%, can say there is no risk of enviromental contamination using those bricks. This way, in this work context, it can to conclude the maximum proportion atends the technical and enviromental criterion is 20%

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This is work itself insert in the mathematics education field of the youth and adult education to aim to practitioners of the educational action into the mathematics area performing to with this is teaching kind, adopting to as parameter the Mathematics Molding approach. The motive of the research is to draw up a application proposal of the molding mathematics as teaching and learning geometry alternative in the youth and adult education. The research it develops in three class of the third level (series 5th and 6th) of he youth and adults education in the one school municipal from the Natal outskirts. Its have qualitative nature with participating observation approach, once performing to directly in to research environment as a mathematics teacher of those same classes. We are used questionnaires, lesson notes and analyses of the officials documents as an basis of claim instruments. The results indicates that activity used the mathematic moldings were appreciated the savoir-faire of the student in to knowledge construction process, when search develop to significant learning methods, helping to student build has mathematics connections with other knowledge areas and inside mathematics himself, so much that enlarges your understanding and assist has in your participation in the other socials place, over there propitiate to change in student and teacher posture with relation to mathematic classroom dynamics

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of the present work is to verify the effects of Rural Social welfare in the family agriculture of the microrregião Serra de São Miguel-RN. The study based on available bibliography on the theme, in secondary data and in a rising amostral accomplished in three municipal districts (Encanto, São Miguel and Riacho de Santana) of the microrregião. The universe of the study was the establishments of the family agriculture appeared in the Agricultural Census of 2006, in those municipal districts. The unit of considered analysis was the rural family, with the interviews being applied close to the farmers' families with and without retired rural. The sample was of 94 present families in the family establishments. The results demonstrate that the Rural Precaution reaches a significant covering degree in the rural area of the researched municipal districts, with an average of 1,57 beneficiaries for home in the families with retired. The data of the research attest that the family agriculture in the microrregião Serra de São Miguel-RN it has few favorable conditions for his/her development, once, besides the shortage of lands and of the climatic factor of the area, the returned public politics the family farmers' totality - like PRONAF and PAA -, it has been unable to give effective answers for the improvement of the life conditions in the rural way, have seen the minimum amount of families reached by those politics, be in function of the drawing or of the atmosphere where they are done. In this context, he/she stands out the importance of the Rural Precaution that, in function of the application of the constitutional devices that you/they guaranteed his/her universalization, it has been the only relevant public politics that, in fact, it has been reaching her/it all their beneficiary potentials. Given the general situation of the family agriculture of the microrregião and of the specific characteristics of the researched family establishments, the hypothesis was corroborated that the rural retirement doesn't contribute directly to the increase / making possible of the family agriculture. In spite of 57,4% of the families with retired have declared to use resources of the retirement in the costing of the rural activity carried out by the family, the annual medium value of the expense just located around 7,02% of the annual value of the retirements gained by the families in the year of 2010. Data the low levels in that the social reproduction of the great majority of the family establishments of the microrregião, the maintenance of the families is operated represents the main destiny of the resources precautions. It was also confirmed the hypothesis that the Rural Precaution constitutes the main monetary contribution of the families with retired. For more than 93% of the families with retired, the retirements doing 50% or more of the total of the family monetary income, and in the composition of the rural income of the families with retired and pensioners, the originating from income the rural retirements are equal to 65,24% of the total of the annual income obtained by the families. It is ended, because, that the rural precaution, given to the adversities for the development of the family agriculture, of the operational inefficacy of the public politics and of the few opportunities of generation of existent income in the local savings, it is the main responsible for the reduction of the poverty and, consequently, for the improvements of the conditions of life of the families of and with seniors in the rural way of the microrregião Serra de São Miguel-RN

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Tomato Salad: An Alternative as Antioxidant Source for Topic Use. Tomato is the principal source of lycopene, a carotenoid with high antioxidant activity which can be used topically as a phytocosmetic to combat skin aging. The aim of this study was to get a lycopene-rich extract from salad tomato pulp. The extract was analyzed using UV/vis spectroscopy, thin layer chromatography and high performance liquid chromatography. Oxidant activity was analyzed using the free radical DPPH method. The presence of lycopene in the salad tomato was confirmed. It was present in the apolar fraction rich in carotenoids, which was 96.70% lycopene. In the evaluation of the antioxidant activity, using the radical DPPH, the extract showed activity (IC(50) = 0,311 mg/mL). We conclude that the salad tomato can be used as a source of antioxidants for topic use.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this study was to characterize the socioeconomic profile of the family farmers who live and work in Brazilian rural space and highlight the importance of family agribusiness through the significant relation between some variables as the value of the total production, GDP share in total area of the establishments, agricultural production and farmer income, that show the important participation of these farmers in agricultural productivity and consequently on the economy of country. Therefore, this sector deserves a greater attention and more investment in the development of public policies that lead to a quality education in rural areas, availability of technical courses for farmers, technical assistance more efficient and effective, as well as funding more readily available

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objectives of this research were characterizing the dairy goat production systems and model it using linear program. On the first step of this research, the model was developed using data from farms that was affiliated in the ACCOMIG/Caprileite, used a similar dairy goat production systems and have a partnership program with Universidade Federal de Minas Gerais . The data of research were from a structured questionnaire applied with farmers and monitoring of production systems during a guided visit on their farms. The results permitted identify that all farms were classified as a small and have a intensive production system. The average herd size had 63.75 dairy goats on lactation; it permits a production of 153, 38 kg of goat milk per day. It was observed that existing more than one channel of commercialization for the goat milk and their derivative products. The data obtained, on the first step of this research, was used to develop a linear program model. It was evaluated in two goat production systems, called P1 and P2. The results showed that the P1 system, with an annual birth and lactation during approximately 300 days was the best alternative for business. These results were compared with a mixed (beef and dairy) goat system in the semiarid region, which indicated merged with both systems. Therefore, to achieve profits and sustainability of the system, in all simulations it was necessary a minimum limit of funding of U.S. $ 10,000.00; this value permit earning of U.S. $ 792.00 per month and pay the investment within 5 years