Luxury fashion : the significance of luxury fashion goods for sustainable fashion design

This paper extends the work of “Luxury fashion : the role of innovation as a key contributing factor in the development of luxury fashion goods and sustainable fashion design” (Finn, 2011). The discussion here begins with the observation that post consumer textile waste remains a major obstacle in realising a model of sustainable fashion design and production however, amongst the millions of tonnes of textile and clothing sent to landfill each year there is little evidence of authentic luxury branded goods ending life as landfill. The sustainable fashion movement often support approaches such as fashion up-cycle, re-cycle and cradle to cradle solutions. This paper argues that the priority should be to break the cycle of consumerism as an immediate intervention in ongoing unsustainable (and in some cases unethical) practices involved in the production of fashion goods. The connections between maker and consumer are explored through object analysis and the findings raise questions of the separation between luxury fashion goods and fashion goods that bear luxury fashion branding. This paper suggests that unethical and subversive exploitation of these connections may be used to promote increased consumerism while at the same time purporting exclusivity and superior craftsmanship.

Improving team dynamics and innovation : the “Aspect Design” approach applied to interaction design

Interaction Design is a fast developing branch of Industrial Design. The availability of cheap microprocessors and sensor electronics allow interactions between people and products that were until recently impossible. This has added additional layers of complexity to the design process. Novice designers find it difficult to effectively juggle these complexities and typically tend to focus on one aspect at a time. They also tend to take a linear, step-by-step approach to the design process in contrast to expert designers who pursue “parallel lines of thought” whilst simultaneously co-evolving both problem and solution. (Lawson, 1993) This paper explores an approach that encourages designers (in this case novice designers) to take a parallel rather than linear approach to the design process. It also addresses the problem of social loafing that tends to occur in team activities.

Design of a preliminary error impact analysis model for spatial safety assessment of earthmoving operations

Regardless of technology benefits, safety planners still face difficulties explaining errors related to the use of different technologies and evaluating how the errors impact the performance of safety decision making. This paper presents a preliminary error impact analysis testbed to model object identification and tracking errors caused by image-based devices and algorithms and to analyze the impact of the errors for spatial safety assessment of earthmoving and surface mining activities. More specifically, this research designed a testbed to model workspaces for earthmoving operations, to simulate safety-related violations, and to apply different object identification and tracking errors on the data collected and processed for spatial safety assessment. Three different cases were analyzed based on actual earthmoving operations conducted at a limestone quarry. Using the testbed, the impacts of the errors were investigated for the safety planning purpose.

Depth of focus and visual acuity with primary and secondary spherical aberration

It is known that the depth of focus (DOF) of the human eye can be affected by the higher order aberrations. We estimated the optimal combinations of primary and secondary Zernike spherical aberration to expand the DOF and evaluated their efficiency in real eyes using an adaptive optics system. The ratio between increased DOF and loss of visual acuity was used as the performance indicator. The results indicate that primary or secondary spherical aberration alone shows similar effectiveness in extending the DOF. However, combinations of primary and secondary spherical aberration with different signs provide better efficiency for expanding the DOF. This finding suggests that the optimal combinations of primary and secondary spherical aberration may be useful in the design of optical presbyopic corrections. © 2011 Elsevier Ltd. All rights reserved.

Design for eco-services. Part A - Environmental Services

Without the virtually free services of nature like clean air and water, humans would not last long. Natural systems can be incorporated in existing urban structures or spaces to add public amenity, mitigate the heat island effect, reduce pollution, add oxygen, and ensure water, electricity and food security in urban areas. Th ere are many eco-solutions that could radically reduce resource consumption and pollution and even provide surplus ecosystem services in the built environment at little or no operational cost, if adequately supported by design. Th is paper is the fi rst of a two part paper that explains what eco-services are, then provides examples of how design can generate natural as well as social capital. Using examples of actual and notional solutions, both papers set out to challenge designers to ‘think again’, and invent ways of creating net positive environmental gains through built environment design.

Design for eco-services. Part B - Building Services

Without the virtually free services of nature like clean air and water, humans would not last long. Natural systems can be incorporated in existing urban structures or spaces to add public amenity, mitigate the heat island eff ect, reduce pollution, add oxygen, and ensure water, electricity and food security in urban areas. Th ere are many eco-solutions that could radically reduce resource consumption and pollution and even provide surplus ecosystem services in the built environment at little or no operational cost, if adequately supported by design. Th is is the second part of a two part paper that explains what eco-services are, then provides examples of how design can generate natural as well as social capital. Using examples of actual and notional solutions, both papers set out to challenge designers to ‘think again’, and invent ways of creating net positive environmental gains through built environment design.

Evaluation of financial incentives as a quality improvement strategy in the public hospital context : clinician attitudes, design variables, and economic costs

In 2008, a three-year pilot ‘pay for performance’ (P4P) program, known as ‘Clinical Practice Improvement Payment’ (CPIP) was introduced into Queensland Health (QHealth). QHealth is a large public health sector provider of acute, community, and public health services in Queensland, Australia. The organisation has recently embarked on a significant reform agenda including a review of existing funding arrangements (Duckett et al., 2008). Partly in response to this reform agenda, a casemix funding model has been implemented to reconnect health care funding with outcomes. CPIP was conceptualised as a performance-based scheme that rewarded quality with financial incentives. This is the first time such a scheme has been implemented into the public health sector in Australia with a focus on rewarding quality, and it is unique in that it has a large state-wide focus and includes 15 Districts. CPIP initially targeted five acute and community clinical areas including Mental Health, Discharge Medication, Emergency Department, Chronic Obstructive Pulmonary Disease, and Stroke. The CPIP scheme was designed around key concepts including the identification of clinical indicators that met the set criteria of: high disease burden, a well defined single diagnostic group or intervention, significant variations in clinical outcomes and/or practices, a good evidence, and clinician control and support (Ward, Daniels, Walker & Duckett, 2007). This evaluative research targeted Phase One of implementation of the CPIP scheme from January 2008 to March 2009. A formative evaluation utilising a mixed methodology and complementarity analysis was undertaken. The research involved three research questions and aimed to determine the knowledge, understanding, and attitudes of clinicians; identify improvements to the design, administration, and monitoring of CPIP; and determine the financial and economic costs of the scheme. Three key studies were undertaken to ascertain responses to the key research questions. Firstly, a survey of clinicians was undertaken to examine levels of knowledge and understanding and their attitudes to the scheme. Secondly, the study sought to apply Statistical Process Control (SPC) to the process indicators to assess if this enhanced the scheme and a third study examined a simple economic cost analysis. The CPIP Survey of clinicians elicited 192 clinician respondents. Over 70% of these respondents were supportive of the continuation of the CPIP scheme. This finding was also supported by the results of a quantitative altitude survey that identified positive attitudes in 6 of the 7 domains-including impact, awareness and understanding and clinical relevance, all being scored positive across the combined respondent group. SPC as a trending tool may play an important role in the early identification of indicator weakness for the CPIP scheme. This evaluative research study supports a previously identified need in the literature for a phased introduction of Pay for Performance (P4P) type programs. It further highlights the value of undertaking a formal risk assessment of clinician, management, and systemic levels of literacy and competency with measurement and monitoring of quality prior to a phased implementation. This phasing can then be guided by a P4P Design Variable Matrix which provides a selection of program design options such as indicator target and payment mechanisms. It became evident that a clear process is required to standardise how clinical indicators evolve over time and direct movement towards more rigorous ‘pay for performance’ targets and the development of an optimal funding model. Use of this matrix will enable the scheme to mature and build the literacy and competency of clinicians and the organisation as implementation progresses. Furthermore, the research identified that CPIP created a spotlight on clinical indicators and incentive payments of over five million from a potential ten million was secured across the five clinical areas in the first 15 months of the scheme. This indicates that quality was rewarded in the new QHealth funding model, and despite issues being identified with the payment mechanism, funding was distributed. The economic model used identified a relative low cost of reporting (under $8,000) as opposed to funds secured of over $300,000 for mental health as an example. Movement to a full cost effectiveness study of CPIP is supported. Overall the introduction of the CPIP scheme into QHealth has been a positive and effective strategy for engaging clinicians in quality and has been the catalyst for the identification and monitoring of valuable clinical process indicators. This research has highlighted that clinicians are supportive of the scheme in general; however, there are some significant risks that include the functioning of the CPIP payment mechanism. Given clinician support for the use of a pay–for-performance methodology in QHealth, the CPIP scheme has the potential to be a powerful addition to a multi-faceted suite of quality improvement initiatives within QHealth.

Developing an IS-Impact decision tool : a literature based design science roadmap

This paper derives from research-in-progress intending both Design Research (DR) and Design Science (DS) outputs; the former a management decision tool based in IS-Impact (Gable et al. 2008) kernel theory; the latter being methodological learnings deriving from synthesis of the literature and reflection on the DR ‘case study’ experience. The paper introduces a generic, detailed and pragmatic DS ‘Research Roadmap’ or methodology, deriving at this stage primarily from synthesis and harmonization of relevant concepts identified through systematic archival analysis of related literature. The scope of the Roadmap too has been influenced by the parallel study aim to undertake DR applying and further evolving the Roadmap. The Roadmap is presented in attention to the dearth of detailed guidance available to novice Researchers in Design Science Research (DSR), and though preliminary, is expected to evolve and gradually be substantiated through experience of its application. A key distinction of the Roadmap from other DSR methods is its breadth of coverage of published DSR concepts and activities; its detail and scope. It represents a useful synthesis and integration of otherwise highly disparate DSR-related concepts.

A design science research roadmap

This paper proposes and synthesizes from previous design science(DS) methodological literature a structured and detailed DS Roadmap for the conduct of DS research. The Roadmap is a general guide for researchers to carry out DS research by suggesting reasonably detailed activities.Though highly tentative, it is believed the Roadmap usefully inter-relates many otherwise seemingly disparate, overlapping or conflicting concepts. It is hoped the DS Roadmap will aid in the planning, execution and communication of DS research,while also attracting constructive criticism, improvements and extensions. A key distinction of the Roadmap from other DS research methods is its breadth of coverage of DS research aspects and activities; its detail and scope. We demonstrate and evaluate the Roadmap by presenting two case studies in terms of the DS Roadmap.

Included by design : a case for regulation for accessible housing in Australia

Accessible housing is a scarce yet much needed commodity in Australia. A national agreement between industry and advocacy groups to a voluntary approach, called the Livable Design program, aims to provide access features in all new housing by 2020. Through a range of awareness raising initiatives, the program is anticipating increased supply by builders and increased demand by home-buyers. However the people who need accessible housing are the least likely and least able to buy it at the point of new sale and average homebuyers do not consider access features as a priority. This approach has not been successful overseas or in Australia in the past. Regulation with incentives supported by education and awareness has provided the best results, yet, regulation typically comes with controversy and resistance from the housing industry. A study is planned to identify how effective the Livable Design program is likely to be, what is likely to hinder it and why regulation is likely to be needed.

Defining and mapping teacher practice in technology classrooms

The indecision surrounding the definition of Technology extends to the classroom as not knowing what a subject “is” affects how it is taught. Similarly, its relative newness – and consequent lack of habitus in school settings - means that it is still struggling to find its own place in the curriculum as well as resolve its relationship with more established subject domains, particularly Science and Mathematics. The guidance from syllabus documents points to open-ended student-directed projects where extant studies indicate a more common experience of teacher –directed activities and an emphasis on product over process. There are issues too for researchers in documenting classroom observations and in analysing teacher practice in new learning environments. This paper presents a framework for defining and mapping classroom practice and for attempting to describe the social practice in the Technology classroom. The framework is a bricolage which draws on contemporary research. More formally, the development of the framework is consonant with the aim of design-based research to develop a flexible, adaptive and generalisable theory to better understanding a teaching domain where promise is not seen to match current reality. The framework may also inform emergent approaches to STEM (Science, Technology, Education and Mathematics) in education.

Designing disruption : linking participatory design and design thinking in technology orientated industries

A vast proportion of companies nowadays are looking to design and are focusing on the end users as a means of driving new projects. However still many companies are drawn to technological improvements which drive innovation within their industry context. The Australian livestock industry is no different. To date the adoption of new products and services within the livestock industry has been documented as being quite slow. This paper investigates how disruptive innovation should be a priority for these technologically focused companies and demonstrates how the use of design led innovation can bring about a higher quality engagement between end user and company alike. A case study linking participatory design and design thinking is presented. Within this, a conceptual model of presenting future scenarios to internal and external stakeholders is applied to the livestock industry; assisting companies to apply strategy, culture and advancement in meaningful product offerings to consumers.

48 Hour Game Making Challenge - In Progress [Four Episodes]

Statement: Jams, Jelly Beans and the Fruits of Passion Let us search, instead, for an epistemology of practice implicit in the artistic, intuitive processes which some practitioners do bring to situations of uncertainty, instability, uniqueness, and value conflict. (Schön 1983, p40) Game On was born out of the idea of creative community; finding, networking, supporting and inspiring the people behind the face of an industry, those in the mist of the machine and those intending to join. We understood this moment to be a pivotal opportunity to nurture a new emerging form of game making, in an era of change, where the old industry models were proving to be unsustainable. As soon as we started putting people into a room under pressure, to make something in 48hrs, a whole pile of evolutionary creative responses emerged. People refashioned their craft in a moment of intense creativity that demanded different ways of working, an adaptive approach to the craft of making games – small – fast – indie. An event like the 48hrs forces participants’ attention on the process as much as the outcome. As one game industry professional taking part in a challenge for the first time observed: there are three paths in the genesis from idea to finished work: the path that focuses on mechanics; the path that focuses on team structure and roles and the path that focuses on the idea, the spirit – and the more successful teams need to put the spirit of the work first and foremost. The spirit drives the adaptation, it becomes improvisation. As Schön says: “Improvisation consists on varying, combining and recombining a set of figures within the schema which bounds and gives coherence to the performance.” (1983, p55). This improvisational approach is all about those making the games: the people and the principles of their creative process. This documentation evidences the intensity of their passion, determination and the shit that they are prepared to put themselves through to achieve their goal – to win a cup full of jellybeans and make a working game in 48hrs. 48hr is a project where, on all levels, analogue meets digital. This concept was further explored through the documentation process. This set of four videos were created by Cameron Owen on the fly during the challenge using both the iphone video camera and editing software in order to be available with immediacy and allow the event audience to share the experience - and perhaps to give some insights into the creative process exposed by the 48 hour challenge. ____________________________ Schön, D. A. 1983, The Reflective Practitioner: How Professionals Think in Action, Basic Books, New York

Teaching design led innovation : the future of industrial design

The profession of industrial design is changing and with that so must industrial design education. The newly derived final year industrial design unit at the Queensland University of Technology (QUT) was created to initiate such a change. A designers’ role in industry is no longer limited to the invention process surrounding human cantered design but has now evolved into design led innovation. This paper reflects upon the teaching methods employed over a two-year period and improvements made over that time to the unit. The student project outcome is to produce a design solution that integrates an underlying novel technology into a new product and or service, with business strategies and manufacturing details being fully integrated into the design process. It is this integrated approach to industrial design teaching that will foster a more grounded and resourceful future designer.