899 resultados para Absorptiometry, Photon
Resumo:
The photoionization of the Ne 2s-electrons was studied from threshold to 1 eV above threshold. The technique of photon-induced fluorescence spectroscopy was applied. Pronounced structures were observed resulting from autoionization of doubly excited atomic states. A threshold cross section of 0.17 Mb was determined.
Resumo:
We have measured prompt and delayed emission spectra of electrons from foilexcited Be, B^+, and Be^2+ ions at 300 keV. On the basis of recently calculated eigenvalues we identified two lines in the prompt Be^+ spectrum as transitions from 2s^22p and 2s2p^2. The delayed Be spectrum indicates that transitions from highly excited quintet states occur. We propose radiationless deexcitation with one excited spectator electron not involved in the transition.
Resumo:
Absolute cross sections for the transitions of the Kr atom into the 4s^1 and 4p^4nl states of the Kr^+ ion were measured in the 4s-electron threshold region by photon-induced fluorescence spectroscopy (PIFS). The cross sections for the transitions of the Kr atom into the 4s^1 and 4p^4nl states were also calculated, as well as the 4p^4nln'l' doubly excited states, in the frame of LS-coupling many-body technique. The cross sections of the doubly-excited atomic states were used to illustrate the pronounced contributions of the latter to the photoionization process, evident from the measurements. The comparison of theory and experiment led to conclusions about the origin of the main features observed in the experiment.
Resumo:
A new type of many-electron radiative transitions involving three electrons is predicted. The results of their investigation by many-body perturbation theory are presented. New spectral lines observed in the wavelength range of 37.5 to 54.0 nm by means of photon-induced fluorescence spectroscopy (PIFS) following the excitation of the Kr I 3d{^-1}np resonances are reported and compared with the predictions.
Resumo:
Cross sections for double photoionization of the Ne L shell into the 2s2p{^5 3}P^0} and ^1P^0 and the 2s^02p^6 ^1S^e states were measured for energies from threshold up to 150 eV, using photon induced fluorescence spectroscopy. Both 2s2p^5 channels were observed with comparable magnitude in contradiction to a propensity rule based on the Wannier-Peterkop-Rau theory. A comparison of the summed ^3P^0 and ^1P^0 cross sections with MBPT calculations results in a deviation of 50%.
Resumo:
Electronic factors in the volume isotope shift have been calculated in an ab initio way with the relativistic Dirac-Fock method for a number of different optical single/and two-photon transitions in Au I. The agreement with a semi-empirical method is within 10% for the resonance transition. For this one and a few other transitions the effect of core excitation has been analyzed with the Multi-configuration Dirac-Fock method as well, and it was found to reduce the electronic factor in the order of 5 %.
Resumo:
Within the quasimolecular (MO) kinematic dipole model we predict a strong dependence of the anisotropy of the MO radiation on the orientation of the heavy ion scattering plane relative to the direction of the photon detection plane.
Resumo:
The screening correction to the coherent pair-production cross section on the oxygen molecule has been calculated using self-consistent relativistic wave functions for the one-center and two-center Coulomb potentials. It is shown that the modification of the wave function due to molecular binding and the interference between contributions from the two atoms have both sizeable effects on the screening correction. The so-obtained coherent pair-production cross section which makes up the largest part of the total atomic cross section was used to evaluate the total nuclear absorption cross section from photon attenuation measurements on liquid oxygen. The result agrees with cross sections for other nuclei if A-scaling is assumed. The molecular effect on the pair cross section amounts to 15 % of the nuclear cross section in the {\delta-resonance} region.
Resumo:
During recent years, quantum information processing and the study of N−qubit quantum systems have attracted a lot of interest, both in theory and experiment. Apart from the promise of performing efficient quantum information protocols, such as quantum key distribution, teleportation or quantum computation, however, these investigations also revealed a great deal of difficulties which still need to be resolved in practise. Quantum information protocols rely on the application of unitary and non–unitary quantum operations that act on a given set of quantum mechanical two-state systems (qubits) to form (entangled) states, in which the information is encoded. The overall system of qubits is often referred to as a quantum register. Today the entanglement in a quantum register is known as the key resource for many protocols of quantum computation and quantum information theory. However, despite the successful demonstration of several protocols, such as teleportation or quantum key distribution, there are still many open questions of how entanglement affects the efficiency of quantum algorithms or how it can be protected against noisy environments. To facilitate the simulation of such N−qubit quantum systems and the analysis of their entanglement properties, we have developed the Feynman program. The program package provides all necessary tools in order to define and to deal with quantum registers, quantum gates and quantum operations. Using an interactive and easily extendible design within the framework of the computer algebra system Maple, the Feynman program is a powerful toolbox not only for teaching the basic and more advanced concepts of quantum information but also for studying their physical realization in the future. To this end, the Feynman program implements a selection of algebraic separability criteria for bipartite and multipartite mixed states as well as the most frequently used entanglement measures from the literature. Additionally, the program supports the work with quantum operations and their associated (Jamiolkowski) dual states. Based on the implementation of several popular decoherence models, we provide tools especially for the quantitative analysis of quantum operations. As an application of the developed tools we further present two case studies in which the entanglement of two atomic processes is investigated. In particular, we have studied the change of the electron-ion spin entanglement in atomic photoionization and the photon-photon polarization entanglement in the two-photon decay of hydrogen. The results show that both processes are, in principle, suitable for the creation and control of entanglement. Apart from process-specific parameters like initial atom polarization, it is mainly the process geometry which offers a simple and effective instrument to adjust the final state entanglement. Finally, for the case of the two-photon decay of hydrogenlike systems, we study the difference between nonlocal quantum correlations, as given by the violation of the Bell inequality and the concurrence as a true entanglement measure.
Resumo:
Real-time studies of the dynamics were performed on the reaction of HgI_2 in a molecular beam. Excitation was by either one or multi pump photons (311 nm), leading to two separate sets of dynamics, each of which could be investigated by a time-delayed probe laser (622 nm) that ionized the parent molecule and the fragments by REMPI processes. These dynamics were distinguished by combining the information from transients taken at each mass (HgI_2, HgI, I_2, Hg, and I) with the results of pump (and probe) power dependence studies on each mass. A method of plotting the slope of the intensity dependence against the pump-probe time delay proved essential. In the preceding publication, we detailed the dynamics of the reaction initiated by a one photon excitation to the A-continuum. Here, we present studies of higher-energy states. Multiphoton excitation accesses predissociative states of HgI_2, for which there are crossings into the symmetric and asymmetric stretch coordinates. The dynamics of these channels, which lead to atomic (I or Hg) and diatomic (HgI) fragments, are discussed and related to the nature of the intermediates along the reaction pathway.
Resumo:
In dieser Arbeit wurde das Wachstum sowie die ultraschnelle Elektronendynamik des Oberflächenplasmon Polaritons von Goldnanoteilchen auf Titandioxid untersucht. Die Messung der Dephasierungszeit des Oberflächenplasmons von Nanoteilchen mit definierter Form und Größe erfolgte dabei mit der Methode des spektralen Lochbrennens. Die Nanoteilchen wurden durch Deposition von Goldatomen aus einem thermischen Atomstrahl mit anschließender Diffussion und Nukleation, d.h. Volmer-Weber-Wachstum, auf Titandioxidsubstraten hergestellt und mittels einer Kombination aus optischer Spektroskopie und Rasterkraftmikroskopie systematisch untersucht. Dabei lässt sich das Nanoteilchenensemble durch das mittlere Achsverhältnis und den mittleren Äquivalentradius charakterisieren. Die Messungen zeigen, dass die Proben große Größen- und Formverteilungen aufweisen und ein definierter Zusammenhang zwischen Größe und Form der Teilchen existiert. Während kleine Goldnanoteilchen nahezu kugelförmig sind, flachen die Teilchen mit zunehmender Größe immer mehr ab. Des Weiteren wurde in dieser Arbeit die Methode des lasergestützten Wachstums auf das System Gold auf Titandioxid angewendet. Systematische Untersuchungen zeigten, dass sich das Achsverhältnis der Teilchen durch geeignete Wahl von Photonenenergie und Fluenz des eingestrahlten Laserlichts definiert und gezielt vorgeben lässt. Die Methode des lasergestützten Wachstums erschließt damit den Bereich außerhalb der Zugänglichkeit des natürlichen Wachstums. Aufgrund der Formabhängigkeit der spektrale Lage der Plasmonresonanz ist man somit in der Lage, die optischen Eigenschaften der Nanoteilchen gezielt einzustellen und z.B. für technische Anwendungen zu optimieren. Die Untersuchung der ultraschnellen Elektronendynamik von Goldnanoteilchen auf Titandioxid mit äquivalenten Radien zwischen 8 bis 15 nm erfolgte in dieser Arbeit mit der Methode des spektralen Lochbrennes. Hierzu wurde die Dephasierungszeit des Oberflächenplasmons systematisch als Funktion der Photonenenergie in einem Bereich von 1,45 bis 1,85 eV gemessen. Es zeigte sich, dass die gemessenen Dephasierungszeiten von 8,5 bis 16,2 fs deutlich unter den in der dielektrischen Funktion von Gold enthaltenen Werten lagen, was den erwarteten Einfluss der reduzierten Dimension der Teilchen demonstriert. Um die Messwerte trotz verschiedener Teilchengrößen untereinander vergleichen und den Einfluss der intrinsischen Dämpfung quantifizieren zu können, wurde zusätzlich der Dämpfungsparameter A bestimmt. Die ermittelten A-Faktoren zeigten dabei eine starke Abhängigkeit von der Plasmonenergie. Für Teilchen mit Plasmonenergien von 1,45 bis 1,55 eV wurde ein Dämpfungsfaktor von A ~ 0,2 nm/fs ermittelt, der lediglich Oberflächenstreuung als dominierenden Dämpfungsmechanismus widerspiegelt. Hingegen wurde für Teilchen mit Plasmonenergien oberhalb von 1,55 eV ein drastischer Anstieg der Dämpfung auf A ~ 0,4 nm/fs beobachtet. Die erhöhte Dämpfung wurde dabei dem zusätzlichen Vorliegen einer chemischen Dämpfung durch das Titandioxidsubstrat zugeschrieben. Zusammenfassend zeigen die Ergebnisse somit, dass eine starke Abhängigkeit der chemischen Dämpfung von der Photonenenergie vorliegt. Es konnte erstmals nachgewiesen werden, dass die chemische Dämpfung erst ab einer bestimmten unteren Schwelle der Photonenenergie einsetzt, die für Goldnanoteilchen auf Titandioxid bei etwa 1,6 eV liegt.
Resumo:
Die Fluoreszenzspektroskopie ist eine der wenigen Methoden, die eine Untersuchung von Zerfallsprozessen nach einer Anregung mit schmalbandiger Synchrotronstrahlung ermöglicht, wenn die Zerfallsprodukte nicht geladen sind. In der vorliegenden Arbeit wurden in erster Linie Anregungen des molekularen Wasserstoffs untersucht, die zur Erzeugung ungeladener aber angeregter Fragmente führten. Eine Bestimmung der absoluten Querschnitte für die drei möglichen Zerfallskanäle: Ionisation, Dissoziation und molekulare Fluoreszenz nach einer Anregung des Wasserstoffmoleküls im Anregungswellenlängenbereich zwischen 72,4 nm und 80 nm stand im ersten Teil der Arbeit im Vordergrund. Die oben erwähnten Zerfallskanäle und das Transmissionsspektrum wurden simultan aufgenommen und mit Hilfe des Lambert-Beerschen-Gesetzes absolut ermittelt. Die Verwendung der erhaltenen Querschnitte ermöglichte die Bestimmung der Dominanz der einzelnen Zerfallskanäle für 3p-D Pi-, 4p-D' Pi- und 5p-D’’ Pi-Zustände in Abhängigkeit von Vibrationsniveaus. Diese Zustände koppeln über eine nicht adiabatische Kopplung mit einem 2p-C Pi-Zustand, was zur Prädissoziation führt. Des Weiteren koppeln die angeregten Zustände zu höher liegenden Rydberg-Zuständen, damit wird eine starke Variation der Ionisationswahrscheinlichkeit in Abhängigkeit von Vibrationsniveaus verursacht. Die Stärke der Kopplung ist dabei entscheidend welcher der drei möglichen Zerfallswege dominant zur Relaxation des angeregten Zustandes beiträgt. Alle Werte wurden mit theoretisch ermittelten Daten aus MQDT- Berechnungen [Phys. Rev. A 82 (2010), 062511] verglichen und zeigten sehr gute Übereinstimmungen. Im zweiten Teil der Arbeit ist eine neue Apparatur für winkel- und zeitauflösende Photon-Photon-Koinzidenz entwickelt worden. Die zwei Off-Axis-Parabolspiegel, die das Herzstück der Apparatur bilden, parallelisieren die im Fokus abgestrahlte Emission des doppelt angeregten Wasserstoffmoleküls und projizieren diese auf jeweils einen Detektor. Die an zwei Strahlrohren bei BESSY II durchgeführten Messungen zeigten gute Übereinstimmungen mit den schon vorher veröffentlichten Daten: Messungen [J. Chem. Phys. 88 (1988), 3016] und theoretische Berechnungen [J. Phys. B: At Mol. Opt. Phys. 38 (2005), 1093-1105] der Koinzidenzrate in Abhängigkeit von der anregenden Strahlung. Durch die Bestimmung der gemessenen Zerfallszeit einzelner Prozesse konnten einzelne doppelt angeregte Zustände identifiziert werden.
Resumo:
High-speed semiconductor lasers are an integral part in the implemen- tation of high-bit-rate optical communications systems. They are com- pact, rugged, reliable, long-lived, and relatively inexpensive sources of coherent light. Due to the very low attenuation window that exists in the silica based optical fiber at 1.55 μm and the zero dispersion point at 1.3 μm, they have become the mainstay of optical fiber com- munication systems. For the fabrication of lasers with gratings such as, distributed bragg reflector or distributed feedback lasers, etching is the most critical step. Etching defines the lateral dimmensions of the structure which determines the performance of optoelectronic devices. In this thesis studies and experiments were carried out about the exist- ing etching processes for InP and a novel dry etching process was de- veloped. The newly developed process was based on Cl2/CH4/H2/Ar chemistry and resulted in very smooth surfaces and vertical side walls. With this process the grating definition was significantly improved as compared to other technological developments in the respective field. A surface defined grating definition approach is used in this thesis work which does not require any re-growth steps and makes the whole fabrication process simpler and cost effective. Moreover, this grating fabrication process is fully compatible with nano-imprint lithography and can be used for high throughput low-cost manufacturing. With usual etching techniques reported before it is not possible to etch very deep because of aspect ratio dependent etching phenomenon where with increasing etch depth the etch rate slows down resulting in non-vertical side walls and footing effects. Although with our de- veloped process quite vertical side walls were achieved but footing was still a problem. To overcome the challenges related to grating defini- tion and deep etching, a completely new three step gas chopping dry etching process was developed. This was the very first time that a time multiplexed etching process for an InP based material system was demonstrated. The developed gas chopping process showed extra ordinary results including high mask selectivity of 15, moderate etch- ing rate, very vertical side walls and a record high aspect ratio of 41. Both the developed etching processes are completely compatible with nano imprint lithography and can be used for low-cost high-throughput fabrication. A large number of broad area laser, ridge waveguide laser, distributed feedback laser, distributed bragg reflector laser and coupled cavity in- jection grating lasers were fabricated using the developed one step etch- ing process. Very extensive characterization was done to optimize all the important design and fabrication parameters. The devices devel- oped have shown excellent performance with a very high side mode suppression ratio of more than 52 dB, an output power of 17 mW per facet, high efficiency of 0.15 W/A, stable operation over temperature and injected currents and a threshold current as low as 30 mA for almost 1 mm long device. A record high modulation bandwidth of 15 GHz with electron-photon resonance and open eye diagrams for 10 Gbps data transmission were also shown.
Resumo:
Propósito de la revisión: la enfermedad de Parkinson (EP) es un trastorno degenerativo caracterizado clínicamente por presentar temblor en reposo, rigidez y bradicinesia. El propósito es determinar la utilidad de la molécula TRODAT-1 en el diagnóstico de la EP. Metodología: se realizó una búsqueda en las bases de datos: PUBMED, COCHRANE, MEDLINE, LILACS y SCIELO en un período de 10 años desde enero de 1998 a enero de 2008. Se obtuvieron 26 artículos, estos se analizaron y se seleccionaron 10 artículos, de los cuales sólo 6 respondían a las necesidades del estudio, de acuerdo a los criterios de inclusión. De los 6 artículos analizados, 4 fueron clasificados como evidencia grado (+) y los 2 restantes evidencia grado (-) de acuerdo con las guías NICE. Todos los artículos revisados reportan una disminución importante en la captación del TRODAT-1 a nivel estriatal, su utilidad en el diagnóstico de EP en estadios tempranos, bajo costo y seguridad. Sólo tres reportan valores de sensibilidad y especificidad, pero su nivel de calidad no permite hacer una comparación de los mismos. Conclusiones: se propone realizar estudios de prueba diagnóstica comparados con el diagnóstico clínico de la enfermedad, que tengan un acuerdo en la forma de plantear las mediciones semicuantitativas de las unidades de captación utilizando las mismas fórmulas para hacerlos comparables.
Resumo:
A series of InxAl1-xAs samples (0.51≪x≪0.55)coherently grown on InP was studied in order to measure the band-gap energy of the lattice matched composition. As the substrate is opaque to the relevant photon energies, a method is developed to calculate the optical absorption coefficient from the photoluminescence excitation spectra. The effect of strain on the band-gap energy has been taken into account. For x=0.532, at 14 K we have obtained Eg0=1549±6 meV