A New Gridding Technique for High Density Microarray Images Using Intensity Projection Profile of Best Sub Image

As the technologies for the fabrication of high quality microarray advances rapidly, quantification of microarray data becomes a major task. Gridding is the first step in the analysis of microarray images for locating the subarrays and individual spots within each subarray. For accurate gridding of high-density microarray images, in the presence of contamination and background noise, precise calculation of parameters is essential. This paper presents an accurate fully automatic gridding method for locating suarrays and individual spots using the intensity projection profile of the most suitable subimage. The method is capable of processing the image without any user intervention and does not demand any input parameters as many other commercial and academic packages. According to results obtained, the accuracy of our algorithm is between 95-100% for microarray images with coefficient of variation less than two. Experimental results show that the method is capable of gridding microarray images with irregular spots, varying surface intensity distribution and with more than 50% contamination

Non-destructive evaluation of carrier transport properties in CuInS2 and CuInSe2 thin films using photothermal deflection technique

Photothermal deflection technique (PTD) is a non-destructive tool for measuring the temperature distribution in and around a sample, due to various non-radiative decay processes occurring within the material. This tool was used to measure the carrier transport properties of CuInS2 and CuInSe2 thin films. Films with thickness <1 μm were prepared with different Cu/In ratios to vary the electrical properties. The surface recombination velocity was least for Cu-rich films (5×105 cm/s for CuInS2, 1×103 cm/s for CuInSe2), while stoichiometric films exhibited high mobility (0.6 cm2/V s for CuInS2, 32 cm2/V s for CuInSe2) and high minority carrier lifetime (0.35 μs for CuInS2, 12 μs for CuInSe2

Optimization of parameters of chemical spray pyrolysis technique to get n and p-type layers of SnS

SnS thin films were prepared using automated chemical spray pyrolysis (CSP) technique. Single-phase, p-type, stoichiometric, SnS films with direct band gap of 1.33 eV and having very high absorption coefficient (N105/cm) were deposited at substrate temperature of 375 °C. The role of substrate temperature in determining the optoelectronic and structural properties of SnS films was established and concentration ratios of anionic and cationic precursor solutions were optimized. n-type SnS samples were also prepared using CSP technique at the same substrate temperature of 375 °C, which facilitates sequential deposition of SnS homojunction. A comprehensive analysis of both types of films was done using x-ray diffraction, energy dispersive x-ray analysis, scanning electron microscopy, atomic force microscopy, optical absorption and electrical measurements. Deposition temperatures required for growth of other binary sulfide phases of tin such as SnS2, Sn2S3 were also determined

CuInS2/In2S3 Cells using a Cost-effective Technique: Significance of Precursor Ratios on Cell Parameters

Thin film solar cells having structure CuInS2/In2S3 were fabricated using chemical spray pyrolysis (CSP) technique over ITO coated glass. Top electrode was silver film (area 0.05 cm2). Cu/In ratio and S/Cu in the precursor solution for CuInS2 were fixed as 1.2 and 5 respectively. In/S ratio in the precursor solution for In2S3 was fixed as 1.2/8. An efficiency of 0.6% (fill factor -37.6%) was obtained. Cu diffusion to the In2S3 layer, which deteriorates junction properties, is inevitable in CuInS2/In2S3 cell. So to decrease this effect and to ensure a Cu-free In2S3 layer at the top of the cell, Cu/In ratio was reduced to 1. Then a remarkable increase in short circuit current density was occurred from 3 mA/cm2 to 14.8 mA/cm2 and an efficiency of 2.13% was achieved. Also when In/S ratio was altered to 1.2/12, the short circuit current density increased to 17.8 mA/cm2 with an improved fill factor of 32% and efficiency remaining as 2%. Thus Cu/In and In/S ratios in the precursor solutions play a crucial role in determining the cell parameters

Reliable and Damage-Free Estimation of Resistivity of ZnO Thin Films for Photovoltaic Applications Using Photoluminescence Technique

This work projects photoluminescence (PL) as an alternative technique to estimate the order of resistivity of zinc oxide (ZnO) thin films. ZnO thin films, deposited using chemical spray pyrolysis (CSP) by varying the deposition parameters like solvent, spray rate, pH of precursor, and so forth, have been used for this study. Variation in the deposition conditions has tremendous impact on the luminescence properties as well as resistivity. Two emissions could be recorded for all samples—the near band edge emission (NBE) at 380 nm and the deep level emission (DLE) at ∼500 nm which are competing in nature. It is observed that the ratio of intensities of DLE to NBE ( DLE/ NBE) can be reduced by controlling oxygen incorporation in the sample. - measurements indicate that restricting oxygen incorporation reduces resistivity considerably. Variation of DLE/ NBE and resistivity for samples prepared under different deposition conditions is similar in nature. DLE/ NBE was always less than resistivity by an order for all samples.Thus from PL measurements alone, the order of resistivity of the samples can be estimated.

A STUDY OF THE TECHNIQUE OF THE HINDI DRAMA POST PRASAD PERIOD (1935 - 1965)

Hindi

THE PDETICAL WORKS DF GIRI-IA KUMAR MATHUR: SENSIBILITY AND TECHNIQUE

HINDI

A pilot investigation of the relationship between climate variability and milk compounds under the bootstrap technique

This study analyzes the linear relationship between climate variables and milk components in Iran by applying bootstrapping to include and assess the uncertainty. The climate parameters, Temperature Humidity Index (THI) and Equivalent Temperature Index (ETI) are computed from the NASA-Modern Era Retrospective-Analysis for Research and Applications (NASA-MERRA) reanalysis (2002–2010). Milk data for fat, protein (measured on fresh matter bases), and milk yield are taken from 936,227 milk records for the same period, using cows fed by natural pasture from April to September. Confidence intervals for the regression model are calculated using the bootstrap technique. This method is applied to the original times series, generating statistically equivalent surrogate samples. As a result, despite the short time data and the related uncertainties, an interesting behavior of the relationships between milk compound and the climate parameters is visible. During spring only, a weak dependency of milk yield and climate variations is obvious, while fat and protein concentrations show reasonable correlations. In summer, milk yield shows a similar level of relationship with ETI, but not with temperature and THI. We suggest this methodology for studies in the field of the impacts of climate change and agriculture, also environment and food with short-term data.

Study on Granular Dynamics in Vertically Vibrated Beds using Tracking Technique

The study of granular material is of great interest to many researchers in both engineering and science communities. The importance of such a study derives from its complex rheological character and also its significant role in a wide range of industrial applications, such as coal, food, plastics, pharmaceutical, powder metallurgy and mineral processing. A number of recent reports have been focused on the physics of non-cohesive granular material submitted to vertical vibration in either experimental or theoretical approaches. Such a kind of system can be used to separate, mix and dry granular materials in industries. It exhibits different instability behaviour on its surface when under vertical vibration, for example, avalanching, surface fluidization and surface wave, and these phenomena have attracted particular interest of many researchers. However, its fundamental understanding of the instability mechanism is not yet well-understood. This paper is therefore to study the dynamics of granular motion in such a kind of system using Positron Emission Particle Tracking (PEPT), which allows the motion of a single tracer particle to be followed in a non-invasive way. Features of the solids motion such as cycle frequency and dispersion index were investigated via means of authors’ specially-written programmes. Regardless of the surface behaviour, particles are found to travel in rotational movement in horizontal plane. Particle cycle frequency is found to increase strongly with increasing vibration amplitude. Particle dispersion also increased strongly with vibration amplitude. Horizontal dispersion is observed to always exceed vertical dispersion.

Implementation of a robust coded structured light technique for dynamic 3D measurements

This paper presents the implementation details of a coded structured light system for rapid shape acquisition of unknown surfaces. Such techniques are based on the projection of patterns onto a measuring surface and grabbing images of every projection with a camera. Analyzing the pattern deformations that appear in the images, 3D information of the surface can be calculated. The implemented technique projects a unique pattern so that it can be used to measure moving surfaces. The structure of the pattern is a grid where the color of the slits are selected using a De Bruijn sequence. Moreover, since both axis of the pattern are coded, the cross points of the grid have two codewords (which permits to reconstruct them very precisely), while pixels belonging to horizontal and vertical slits have also a codeword. Different sets of colors are used for horizontal and vertical slits, so the resulting pattern is invariant to rotation. Therefore, the alignment constraint between camera and projector considered by a lot of authors is not necessary

Cirugía bariatrica : gastrogastroplastia laparoscopica y bypass gástrico en pacientes con obesidad mórbida

La obesidad es un problema de salud global siendo la cirugía bariatrica el mejor tratamiento demostrado. El Bypass gástrico (BGYR) es el método más utilizado que combina restricción y malabsorcion; sin embargo los procedimientos restrictivos se han popularizado recientemente. La Gastro-gastroplastia produce restricción gástrica reversible por medio de un pouch gástrico con anastomosis gastrogástrica y propusimos su evaluación Métodos: Estudio retrospectivo no randomizado que evaluó archivos de pacientes con GG y BGYR laparoscópicos entre febrero de 2008 y Abril de 2011 Resultados: 289 pacientes identificados: 180 GG y 109 BGYR de los cuales 138 cumplieron criterios de inclusión, 77 (55.8%) GG y 61 (44,2%) BGYR, 18 (13%) hombres y 120 (87%) mujeres. Para GG la mediana del peso inicial fue 97,15 (± 17,3) kg, IMC inicial de 39,35 (± 3,38) kg/m2 y exceso de peso de 37,1 (±11,9). La mediana de IMC a los 1, 6 y 12 meses fue 34,8 (±3,58) kg/m2, 30,81 (±3,81) kg/m2, 29,58 (±4,25) kg/m2 respectivamente. La mediana de % PEP 1, 6 y 12 meses fue 30,9 (±14,2) %, 61,88 (±18,27) %, 68,4 (±19,64) % respectivamente. Para BGYR la mediana del peso inicial fue 108,1 (± 25,4) kg, IMC inicial 44,4 (± 8,1) y exceso de peso de 48,4 (±15,2) %. La mediana de IMC a los 1, 6 y 12 meses fue 39 (±7,5) kg/m2, 33,31 (±4,9) kg/m2, 30,9 (±4,8) kg/m2 respectivamente. La mediana de % PEP 1, 6 y 12 meses fue 25,9 (±12,9) %, 61,87 (±18,62) %, 71,41 (±21,09) % respectivamente. Seguimiento a un año Conclusiones: La gastro-gastroplastia se plantea como técnica restrictiva, reversible, con resultados óptimos en reducción de peso y alternativa quirúrgica en pacientes con obesidad. Son necesarios estudios a mayor plazo para demostrar mantenimiento de cambios en el tiempo

Exam preparation - Technique

These slides give general tips on exam technique in the context of feedback from a previous exam the students took

Revisión sistemática de la literatura: efecto de los rellenos inyectables en la región periorbitaria

Introducción: El conocimiento actual de la fisiopatología del envejecimiento periorbitario justifica la aplicación de materiales de relleno inyectables, dado que se enfocan en la restauración del volumen perdido en esta zona, convirtiéndose en una excelente alternativa a procedimientos quirúrgicos que remueven el tejido excedente. Sin embargo los efectos y la seguridad de esta naciente tendencia terapéutica aún no se sustentan en una sólida base científica. El objetivo de esta revisión es identificar el material de relleno inyectable más adecuado para el manejo de los defectos volumétricos estéticos de la región periorbitaria. Metodología: Se realizó una búsqueda exhaustiva de los artículos indexados publicados del 1º de enero de 2.000 al 30 de septiembre de 2.013, en diversas bases de datos electrónicas, se seleccionaron catorce publicaciones, se extrajo la información referente a datos demográficos, la intervención, el seguimiento y los desenlaces y se realizó un análisis de 14 estudios que cumplieron los criterios. Resultados: Todos los artículos incluidos poseían un bajo nivel de evidencia y del grado de recomendación. Todos los materiales de relleno se asociaron a altos niveles de satisfacción para el paciente, adecuada mejoría de la apariencia estética y similares efectos colaterales, el ácido hialurónico fue el material de relleno inyectable más utilizado en la región periorbitaria. Discusión: Los materiales de relleno inyectable mejoran los defectos volumétricos estéticos de la región periorbitaria pero es necesaria mayor evidencia para determinar el tipo relleno más apropiado para esta condición.

Experiencia en nefrectomía: serie de casos de cuatro años

Introducción: Las indicaciones por las cuales un paciente requiere una nefrectomía son múltiples: las neoplasias, la hidronefrosis y la exclusión funcional son las principales. En manos expertas la nefrectomía es un procedimiento seguro, especialmente porque en la actualidad el abordaje por excelencia es realizar una técnica mínimamente invasiva con conservación de nefronas. Se presenta el análisis de la experiencia en Mederi, Hospital Universitario Mayor en esta intervención. Metodología: Se realizó una serie de casos de pacientes llevados a nefrectomía entre mayo de 2008 y mayo de 2012. Se incluyeron la totalidad de los casos. Resultados: Se analizaron 72 registros, 49 mujeres y 25 hombres; 13 de ellas fueron laparoscópicas. La edad promedio fue de 58,6 años. El tiempo medio operatorio fue 169,23 minutos (118-220 minutos). El sangrado operatorio promedio fue de 680,63 ml (IC95%: 2,83-1358 ml). El tiempo de hospitalización promedio fue de 4,88 días IC95%. La mayoría de los pacientes se distribuyeron en estadios medios de la enfermedad tumoral, con poco compromiso ganglionar y metástasis; el diagnóstico histológico y estadio dominante fueron el carcinoma de células renales grado 3 de Fuhrman respectivamente. Se reportan 13 casos de compromiso de la capsula de Gerota y 11 con compromiso del hilio. Discusión: La experiencia en nefrectomía de la institución es muy positiva por el bajo número de mortalidad y complicaciones. En cuanto a la técnica, es importante promover la técnica laparoscópica

Type 2 diabetes; elderly; cognitive deficit; cognitive flexibility; executive functions Resumen

Through meditation, people become aware of what happens in the body and mind, accepting the present experiences as they are and getting a better understanding of the true nature of things. Meditation practices and its inclusion as an intervention technique, have generated great interest in identifying the brain mechanisms through which these practices operate. Different studies suggest that the practice of meditation is associated with the use of different neural networks as well as changes in brain structure and function, represented in higher concentration of gray matter structures at the hippocampus, the right anterior insula, orbital frontal cortex (OFC) and greater involvement of the anterior cingulate cortex (ACC). These and other unrelated studies, shows the multiple implications of the regular practice of mindfulness in the structures and functions of the brain and its relation to certain observable and subjective states in people who practice it. Such evidence enabling the inclusion of mindfulness in psychological therapy where multiple applications have been developed to prove its effectiveness in treating affective and emotional problems, crisis management, social skills, verbal creativity, addiction and craving management, family and caregivers stress of dementia patients and others. However, neuropsychological rehabilitation has no formal proposals for intervention from these findings. The aim of this paper is to propose use of Mindfulness in neuropsychological rehabilitation process, taking the positions and theory of A.R. Luria.