Approximate Bayesian Computation for Smoothing

We consider a method for approximate inference in hidden Markov models (HMMs). The method circumvents the need to evaluate conditional densities of observations given the hidden states. It may be considered an instance of Approximate Bayesian Computation (ABC) and it involves the introduction of auxiliary variables valued in the same space as the observations. The quality of the approximation may be controlled to arbitrary precision through a parameter ε > 0. We provide theoretical results which quantify, in terms of ε, the ABC error in approximation of expectations of additive functionals with respect to the smoothing distributions. Under regularity assumptions, this error is, where n is the number of time steps over which smoothing is performed. For numerical implementation, we adopt the forward-only sequential Monte Carlo (SMC) scheme of [14] and quantify the combined error from the ABC and SMC approximations. This forms some of the first quantitative results for ABC methods which jointly treat the ABC and simulation errors, with a finite number of data and simulated samples. © Taylor & Francis Group, LLC.

杯芳烃羧酸萃取稀土、钍与含杯配合物结构研究

本文以大环化合物杯芳烃羧酸为萃取体系，系统考察稀土元素在该体系中的萃取分离性能，比较了钍与稀土元素的萃取性质差异，从而为杯芳烃羧酸在该分离领域中的应用提供一定的实验数据，此外，采用无机水热合成制备了含杯[8]芳烃的三元超分子配位聚合物并表征其结构，具体研究内容如下： 1、 合成杯芳烃并进行化学修饰得萃取剂杯芳烃羧酸，采用熔点测定、元素分析、TG-DTA、FT-IR和1H-NMR等分析方法表征，并利用两相滴定法测定了杯芳烃羧酸的基本常数。 2、 研究杯芳烃羧酸-CHCl3/RE-HCl萃取体系碱金属离子、离子强度、酸度、温度和萃取剂浓度对Eu(III)的萃取分配比影响，并分析其萃取机理。在此基础上，探索杯芳烃羧酸的协同萃取性能，发现杯[4]芳烃羧酸与伯胺N1923的ABC酸碱耦合协萃体系对轻、中、重稀土有不同的协萃能力，协萃系数与原子序数呈“双峰效应”。 3、 在萃取热力学基础上，利用层流恒界面池研究杯[4]芳烃羧酸萃取Nd(III)的动力学性质，确定了萃取反应控制模式随条件不同有所变化，化学反应在相界面上进行，并获得了萃取反应速率方程。 4、 以杯芳烃羧酸-CHCl3/Th-HCl体系研究钍的萃取性能，考察了碱金属离子、离子强度、酸度、温度和萃取剂浓度对Th(IV)的萃取影响，比较其与稀土萃取性能的差异，并在此基础上进一步研究与伯胺N1923协同萃取钍的性能，分析了协同萃取反应机制。 5、 水热合成并表征了含磺化杯[8]芳烃，2，2’-联吡啶与镍的三元超分子配合物。磺化杯[8]在该配合物中呈“双-反向锥式”构型，分子间由氢键和C-H…π相互作用将四核Ni簇连接成三维超分子结构。

两亲性三嵌段共聚物在选择性稀溶液中的自组装及应用

本论文主要研究了ABA和ABC型两亲性三嵌段共聚物在选择性稀溶液中的自组装行为，得到了多种形态新颖、结构复杂多样的胶束，研究了这些复杂胶束的形成过程，探讨了影响胶束形态的各种因素并通过适当的方法对胶束形态进行调控。研究了聚乙烯基毗陡（P4VP）／聚苯乙烯（PS）三嵌段共聚物P4VP-b-PS-b-P4VP在二氧六环／水中的自组装行为，成功得到了嵌段共聚物环状胶束，并通过实验研究了环状胶束的形成过程。结果表明，胶束形态依赖于退火时间的长短。随着退火时间的延长，胶束结构从棒状过渡到环形结构。以实验结果为基础提出了环状胶束形成的新的机理，即囊泡塌陷形成环。同时，通过改变实验条件还得到了一些新型的环状复合结构，如环套环形、鸟状、哑铃形、戒指形、网络状等结构，并得到了与计算机模拟一致的结果。通过不同的方法对ABA型三嵌段共聚物（P4VP-b-PS-b-P4VP）在选择性溶液中的自组装胶束形态进行调控：首先，详细研究了P4VP-b-PS-b-P4VP在不同的共溶剂中的自组装行为。结果表明通过单纯改变共溶剂的性质可以很方便地调节胶束的形态，得到了球、棒、囊泡等结构。并用混合溶剂的方法得到了长度和直径可控的纳米线胶束。同时，通过加入第二种选择性溶剂（核层嵌段PS的选择性溶剂甲苯）的方法使形成胶束的核层嵌段在胶核中的伸展程度增加，从而使胶束形态发生转变。其次，研究了加入表面活性剂十五烷基苯酚（PDP）以构建分子间氢键来调节P4VP-b-PS-b-P4VP的胶束形态。结果表明，通过调节PDP的加入量可以使胶束形态发生从球到棒，到网络状、再到囊泡结构的转变。通过实验对比系统地研究了PDP的加入对胶束形态转变的影响，提出了相应的形态转变机理。再次，研究了不同分子量的嵌段共聚物之间共混及共聚物与均聚物共混对胶束形态的影响。结果表明加入亲油嵌段的均聚物对共聚物胶束形态影响非常明显，胶束形态与加入的均聚物的分子量及加入量直接相关。同时得到了一些新形态的胶束，如海绵状、笼子状等。共聚物共混的研究结果表明：通过两种不同分子量的共聚物共混可以得到这两种共聚物胶束的过渡态结构。用共聚物混合的方法还可以得到一些具有生物模拟性的胶束结构，如乌贼状、章鱼状等。这加深了人们对囊泡的形成机理及各种胶束形态之间形态转变的认识。P4VP-b-PS-b-P4VP通过在二氧六环／水中的自组装形成了囊泡，结果表明囊泡的尺寸依赖于初始状态下共聚物在共溶剂中的浓度及退火时间。除得到常规的球形囊泡外，还得到一些非球形囊泡，如长条形、三角形、项链形等囊泡结构。结合计算机模拟的方法研究了囊泡的形成机理，发现这些不同结构的囊泡的形成是由于初始状态下密度涨落所引起的。研究了实验中经常出现的各种胶束形态共存现象的原因，发现体系中亚稳态的存在是多形态共存的重要原因之一。通过聚苯乙烯一左聚乙烯基毗睫一左聚氧乙烯（PS一b一PZVP一b一PEO）在THF／水中的二次自组装首次得到了一种具有生物模拟性的巨大的节状蠕虫胶束（SWM）。研究发现，SWM是由重复单元盘状结构和丝状结构相连组成的。最令人吃惊的是这种SWM与自然界中的一些生命体如蛆叫、蛹、昆虫类的幼虫结构非常相似。通过对SWM形成过程中的中间态胶束结构的深入研究发现SWM是由球形胶束通过二次自组装形成的。SWM的形成过程可以分为三个阶段：ABC三嵌段共聚物先组装形成球形结构；这些球型结构粘连在一起形成梭形的中间结构；这些梭状中间结构中的球经过重组和重新调整各嵌段的排布最终形成SWM。用所得到的嵌段共聚物胶束为模板，采用无电沉积的方法成功制备了各种形态的金属一有机高分子纳米复合材料。用简单的方法还得到了导电金属金一银的双金属纳米结构材料。这些纳米结构材料在微电子器件等领域有潜在应用价值。以上研究结果丰富了人们对嵌段共聚物在选择性介质中自组装行为的理解，为人们提供了对生物材料自组装本质的理解的依据。这在两亲性分子在溶液中自组装的基础研究方面以及基于这些自组装形态而构建结构及功能更复杂的纳米结构材料等方面都有一定的意义。

中国部分地区未经治疗HIV-1 感染者耐药基因研究

高效抗逆转录病毒治疗(HAART)的应用，极大的降低了AIDS发病率和死亡 率，延长了HIV感染者的生命。但HIV耐药在很大程度上影响了HAART的疗效， 耐药株的产生成为影响抗病毒治疗效果的主要因素。欧洲、美国的耐药监测技术 规范均推荐在新感染未经抗病毒药物治疗的患者中进行原发耐药检测。我国政府 于2003年底出台了艾滋病治疗的“四免一关怀”政策，陆续在全国范围内开展了大 规模的免费抗病毒治疗，监测我国未经抗病毒药物治疗HIV-1感染者中的耐药情 况可以为制定合理的用药方案和减少耐药毒株出现提供科学依据。 根据世界卫生组织(WHO)的“HIV 耐药监测指南”，无偿献血者中的HIV-1 感染者，可以认定为HIV 新诊断未治疗人群。分析了云南无偿献血者的血浆和 外周血单核细胞(PBMC)，研究云南无偿献血人群的耐药状况。 已有实验室血清学方法识别HIV-1 新近感染和长期感染，用BED-CEIA 方 法，在河南、安徽、山西自愿咨询检测(VCT)人群中检出新近感染人群，进行耐 药基因研究, 对照研究了部分长期感染人群。 样品提取核酸后，巢式聚合酶链反应(nested-PCR)扩增pol 基因区(含蛋白酶 区1～99 氨基酸全长和逆转录酶区1～242 氨基酸)。PCR 产物双脱氧法测序，所 得序列与洛斯阿拉莫斯HIV 核酸序列库(Los Alamos HIV Database)标准株构建系 统进化树分析亚型；用斯坦福大学耐药数据库(Standford HIV Drug Resistance Database)分析耐药。 研究发现，云南省2005～2006 年无偿献血者中，有52 例为HIV-1 阳性，其 中49 例血浆和相应的PBMC 样品病毒基因扩增成功。序列分析表明，HIV 病毒 的亚型分布为CRF08_BC (51.0%), CRF07_BC (24.5%), CRF01_AE (20.4%)和B (4.1%)；所有样品均未发现蛋白酶抑制剂（PI）耐药基因位点主要突变，只在6 例(11.7%)样品中发现7 例次PI 次要耐药位点突变；另外，在9 例(18.4%)样品中发现10 例次核苷类逆转录酶抑制剂(NRTI) 耐药突变，1 例(2.0%)发生非核苷类 逆转录酶抑制剂(NNRTI) 耐药突变；针对具体药物PI/NRTI/NNRTI 均只有1 例 有潜在的低度耐药，临床仍对药物敏感。PBMC 和血浆的病毒耐药没有显著差异。 从河南、安徽、山西27 个VCT 检测点2006～2007 年采集的10310 例样品 中，通过WB 和BED-CEIA 检测出新近感染人群63 例，分析成功50 例血浆样 品；河南VCT 长期感染样品中随机抽样，分析成功19 例样品。分析成功的69 例VCT 样品中，HIV 病毒株的亚型分布分别为B’ (95.7%)，CRF01_AE(2.9%)和 C(1.4%)。上诉样品均未检出PI 主要耐药相关突变，只在26 例(37.7%)样品中存 在27 例次PI 次要耐药相关突变；3 例(4.3%)样品出现6 例次NRTI 耐药相关突 变，7 例(10.1%)样品出现8 例次NNRTI 耐药相关突变。通过与斯坦福大学耐药 数据库比对，没有发现针对PI 类药物的临床耐药；但有2 例(2.8%)针对NRTI 类 药物耐药，1 例有M184V 突变导致对拉米夫定(3TC)和氟代拉米夫定(FTC)高度 耐药；1 例样品存在T215Y、M41L、L210W 三重突变位点，对阿巴卡韦(ABC)、 去羟肌苷(ddI)和坦那夫韦(TDF)中度耐药，对齐多夫定(AZT)和司他夫定(d4T)高 度耐药；针对NNRTI 类药物，有3 例(4.3%)毒株有耐药，1 例有K103N 突变导 致对奈韦拉平(NVP)、地拉韦啶(DLV)和依菲韦伦(EFV)的高度耐药；1 例有Y188L 突变导致对NVP 和EFV 的高度耐药；1 例存在K101E 和G190A 双重突变，导 致对NVP 的高度耐药，对DLV、EFV 和依曲韦林(ETR)中度耐药。 比较长期感染和新近感染者之间的亚型和耐药，未发现显著差异。 研究结果表明，云南、河南和安徽未经治疗HIV-1 感染者中耐药处于低流行 状态。亚型分布云南无偿献血者以CRF_BC 为主，河南、安徽VCT 人群以B’ 为主。应持续在未经治疗人群中进行耐药监测。

中国沙棘(Hippophae rhamnoides subsp. sinensis)不同种群对干旱胁迫的响应差异与干旱诱导蛋白的分析

沙棘广泛分布于亚欧大陆的温带地区和亚洲亚热带的高海拔地区。沙棘能适应多种生态环境，能耐受多种逆境(如干旱、低温、高温和盐害等)。在中国，沙棘常常被用作植被恢复中的先锋树种而大量栽培。本文以中国沙棘为试验材料，探索沙棘适应干旱机制，以及沙棘对干旱胁迫的适应机制是否存在种群间的差异，同时试图通过分析干旱胁迫下沙棘叶片蛋白质表达变化探索沙棘适应干旱胁迫的分子机理。 对三个分别来自低海拔湿润地区、低海拔干旱地区和高海拔湿润地区的中国沙棘种群进行干旱胁迫处理。干旱胁迫能提高根冠比，比叶面积，降低平均叶面积和总生物量，提高沙棘的抗氧化性酶活性、脯氨酸含量、脱落酸(ABA)含量、降低光合作用，提高长期用水效率。实验中的这两个低海拔种群比高海拔种群抵抗干旱的能力更强,不同的种群采用了不同的策略来耐受干旱胁迫和过氧化胁迫。 在2004 年度的实验中，干旱胁迫处理下，高海拔湿润种群(道孚种群)严重失水，生长也受到更大的抑制，非气孔因素在抑制光合作用方面占支配地位，抗坏血酸含量下降，ABA和脯氨酸含量增加幅度比九寨沟种群的要高，这可能是因为道孚种群严重失水而引起的；而低海拔湿润种群(九寨沟种群)的体内水分状况几乎不受干旱的影响，生长情况也较道孚种群要好。 在2005 年度的试验中，和高海拔湿润地区种群(道孚)相比较，低海拔干旱地区种群(定西)在叶片相对水含量、根冠比、抗氧化酶活性(过氧化氢酶、抗坏血酸过氧化物酶和谷胱甘肽过氧化物酶)、保护性物质(脯氨酸，脱落酸)含量等方面都要高，光能热耗散能力也更强，而且气体交换参数(气孔扩散阻力和胞间CO2浓度等)对干旱也更不敏感。 分析了干旱胁迫下沙棘叶片蛋白质表达的变化。共发现319 个蛋白质，有4 个蛋白在干旱胁迫下消失(Putative ABCtransporter ATP-binding protein 、Hypothetical proteinXP-515578，热激蛋白Hslu219 和一个没得到鉴定的蛋白)，4 个只在干旱胁迫下出现(没命名的蛋白质产物，对甲基苯-丙酮酸双加氧酶，NTrX 和一个没得到鉴定的蛋白)，46 个蛋白质的表达丰度变化显著，包括32 个干旱负调蛋白，14 个干旱正调蛋白(3 个Rubisco 的大亚基、J-type–co-chaperone Hsc20、putative protein DSM3645-2335、putative acyl-COA 脱氢酶、nesprin-2 和两个没有得到鉴定的蛋白质)。这些蛋白质参与了氮代谢调控、抗氧化行物质的合成、脂肪酸β－氧化、核骨架构造、[Fe-S]基团组装、物质跨膜运输、细胞分裂或作为分子伴侣和蛋白质酶起作用。putative ABC transporter ATP-binging protein、NtrX、nesprin-2 和Hslu 是本试验新发现的高等植物蛋白，我们主要从它们的保守结构域或在其他生物中的同源物来猜测它们的功能。实验结果为我们研究植物抗干旱机制提供了新线索和新视野。 Seabuckthorn (Hippophae rhamnoides L.) is widly distributed throughtout the temperatureresiogn of Europe and Asia and sub-tropical plateau zone of Asia. H. rhamnoides can adapatseveral different environments, and can tolerant several envioronmental stresses (e.g, lowtemperature, high temperature, drought and salty). It has been widely used in forest restoration asthe pioneer species in China. In present study, we applied H.rhamnoides subsp. Sinensis asexperimental materials to study its drought-tolerant mechanism, and expected to findpopulational difference in drought-tolerant mechanism that may exist among populations, and tryto get some insight in drought-tolerant mechanism of it at morecular level through analyzing thechange of leaf protein expression. Three populations from high altitude wet zone, low altitude wet zone and low altitude arid znoe,respectively, were applied in our experiment, and were subjected to drought. Drought increasedthe root/shoot ratio(RS), special leaf area, long-term water use efficinency, activity of antioxidantenzymes, proline content and abscisic acid (ABA) content, declined the net photosynthesis rate(A), average leaf area (ALA), total biomass (TB). Both two low altitude populations were moredrought-tolerant than the high altitude population, and different population applied differentstratedgies to tolerant oxidant stress and drought stress. The results of the exprement in 2004 showed that Daofu population was more drought-sensitivethan Jiuzhai population. Under drought conditions, leaf relative water content (RWC) greatlydecreased in Daofu population, but not in Jiuzhai population. The large loss of water in Daofupopulation resulted in a limitation on A mainly caused by non-stomatal factors, severer suppression in growth rate and a significant reduction in ascorbic acid (AsA) content, comparedwith Jiuzhai population. The greater increase in content of ABA and proline in Daofu populationmay be also induced by large loss in water, so that enable plants to cope with sever drought. In the exprement of 2005, drought significantly increased RS, activities of catalase (CAT),peroxidase (POD), glutathione peroxidase (GPX) and ascorbate peroxidase (APX), and alsosignificantly increased ABA and proline contents. On the other hand, compared with Daofupopulation, drought induced larger RS and activities of CAT, GPX and APX, and higher ABAcontent in Dingxi population, whereas gas exchange traits, e.g., stomatal limitation value (LS) andintercellular CO2 concentration (Ci), were less responsive to drought in Dingxi population thanthose in Daofu population. All these factors enable Dingxi population to tolerant drought betterthan Daofu population. The leaf protein profile of seabuchthorn subjected to drought was analyzed. Altogether 319proteins were detected in well-watered sample, four proteins disappeard by drought (putativeABCtransporter ATP-binding protein, hypothetical protein XP-515578, Hslu219and aunidentified protein), four only appeared under drought (a probable nitrogen regulation protein(NtrX), a 4-hydroxyphenylpyruvate dioxygenase , an unnamed protein product and an identified protein), 32 drought down-regulated proteins, and 14 drought up-regulated proteins (nine wereidentified: three large subunits of Rubisco, a hypothetical protein DSM3645-23351, a putativeacyl-COA dehydrogenase, a nesprin-2, a J-type-co-chaperone HSC20 and two unmatchedproteins). These proteins may involve in β-oxidation, cross-membrane transport, cell division,cytoskeleton stabilization, iron-sulfur cluster assembly, nitrogen metabolism regulation andantioxidant substance biosynthesis or function as molecular chaperone or protease. Four proteins(a putative ABC transporter ATP-binging protein, NtrX, nesprin-2, Hslu) were new found in highplants, and their functions were estimated from their conserved domain or their homologues inother organism. Our results provided new clue and new insight for us to study thedrought-tolerant mechanism in plants.

科技德文长句的翻译

德文语法严谨 ,语序灵活 ,尤其是在科技文章中大量使用长句、套装句 ,再加上可分动词前缀与词根分离 ,与其它一些语言相比 ,句子成分间关系显得复杂是其显著特点。本文通过典型例句 ,归纳总结了德语长句的主要形式 ,构成规律 ,包括 :一、长的冠词—名词结构的几种构成形式1 现在分词与其所属成分构成定语 ;2 过去分词与其所属成分构成定语 ;3 形容词与修饰该词的副词构成定语 ;4 带ZU的不定式及其所属成分作定语 ;5 冠词—名词结构套装形式 ;6 过去分词作名词 ;7 冠词后紧跟分词定语所需的冠词 ;8 冠词后紧跟分词定语所需的介词。二、语序 :正语序、反语序及从句语序三、句子成分的一般顺序1 不同的副词在句子中一般的顺序 ;2 间接宾语、直接宾语在句子中的顺序 ;3 否定词NICHT在句子中通常的位置 ;4 表语结构 ;5 完成时句子中 ,情态不定式与动词不定式的位置关系 ;6 第二分词与不定式的位置关系。四、倒装句五、德文长句中逗号用法种种了解这些有助于弄清句子成分间的关系 ,解读德文长句

三相电压型PWM整流器及其控制策略研究

本文分析了三相电压型PWM整流器在abc、DQ、dq坐标系下的数学模型，开发了基于MATLAB／SIMULINK的三相PWM整流器仿真模块，仿真结果表明基于dq同步旋转坐标系的整流器数学模型是正确的，并具有独特优点。对常用空间电压矢量控制策略进行分析，给出了合成电压矢量的不同方法；分析了固定开关频率的电流预测控制原理。分析了电流环的控制策略，推导出电流环和电压环PI参数与整流器主电路各参数之间的关系。设计了双闭环控制PWM整流器系统的硬件、软件，实现解藕整流器输入电流，并完成了系统仿真，仿真结果表明电压和电流双闭环P1参数选择的合理性以及整个系统的可行性。

长期定位试验下施肥对潮棕壤活性碳库及碳库管理指数的影响

分析了长期不同施肥制度对潮棕壤活性碳库及碳库管理指数的影响。结果表明:长期施肥不同施肥制度对土壤活性碳库、碳素有效率及碳库管理指数有很大影响,长期施用有机循环肥处理,尤其是循环肥配合均衡化肥(NPK+O)施用处理的土壤有机碳、易氧化碳(ROC)、溶解性有机碳(DOC)、微生物量碳含量(MBC)、土壤碳素有效率及土壤碳库管理指数明显高于对照处理的土壤。潮棕壤活性碳库中不同形态的碳素含量大小顺序为:CROC>CMBC>CDOC,同一施肥处理水平下,不同形态碳素有效率以ACC>ABC>AAC。相关分析表明:土壤碳素有效率和碳库管理指数与土壤的化学性质尤其是土壤养分因子呈显著或极显著相关,反应了农业生产措施对土壤碳库的影响,运用土壤碳库管理指数可以很好地反映出土壤碳库的动态变化。

Effect of the nature of annealing solvent on the morphology of diblock copolymer blend thin films

The morphologies and structures for the thin film of blend systems consisting of two asymmetric polystyrene-block-polybutadiene (SB) diblock copolymers induced by annealing in the vapor of different solvents, namely, cyclohexane, benzene, and heptane, which have different selectivity or preferential affinity for a certain block, were investigated by tapping mode atomic force microscopy (AFM) and transmission electron microscopy (TEM). The results revealed that even a slight preferential affinity of good solvent for one block would strongly alter the morphology of the blend thin film.

Synergistic extraction of rare earths using acid-base coupling extractants of calix[4]arene carboxyl derivative and primary amine N1923

Synergistic effect in the extraction of rare earth (RE) metals by the acid-base coupling (ABC) extractants of calix[4]arene carboxyl derivative Bu-t[4]CH2COOH (H(4)A) and primary amine N1923 (RNH2) has been investigated. The extraction of RE was enhanced by the addition of sodium cations into the aqueous phase not only in the extraction system of Bu-t[4]CH2COOH alone but also in the mixture of Bu-t[4]CH2COOH and N1923. The separation factors (SFs) indicating the extraction selectivity of adjacent RE elements became higher in the mixture system.

Effect of crystallization on the lamellar orientation in thin films of symmetric poly(styrene)-b-poly(L-lactide) diblock copolymer

The effect of crystallization on the lamellar orientation of poly( styrene)-b-poly(L-lactide) (PS-PLLA) semicrystalline diblock copolymer in thin films has been investigated by atomic force microscopy (AFM), transmission electronic microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). In the melt state, microphase separation leads to a symmetric wetting structure with PLLA blocks located at both polymer/substrate and polymer/air interfaces. The lamellar period is equal to the long period L in bulk determined by small-angle X-ray scattering (SAXS). Symmetric wetting structure formed in the melt state provides a model structure to study the crystallization of PLLA monolayer tethered on glassy (T-c < T-g,T-PS) or rubber (T-c > T-g,T-PS) PS substrate. In both cases, it is found that the crystallization of PLLA results in a "sandwich" structure with amorphous PS layer located at both folding surfaces. For T-c <= T-g,T- PS, the crystallization induces a transition of the lamellar orientation from parallel to perpendicular to substrate in between and front of the crystals. In addition, the depletion of materials around the crystals leads to the formation of holes of 1/2 L, leaving the adsorbed monolayer exposure at the bottom of the holes.

Crystallization of weakly segregated poly(styrene-b-epsilon-caprolactone) diblock copolymer in thin films

The surface morphology and crystallization behavior of a weakly segregated symmetric diblock copolymer, poly(styrene-b-6-caprolactone) (PS-b-PCL), in thin films were investigated by optical microscopy, X-ray photoelectron spectroscopy, and atomic force microscopy (AFM). When the samples were annealed in the molten state, surface-induced ordering, that is, relief structures with uniform thickness or droplets in the adsorbed monolayer, were observed depending on the annealing temperature. The polar PCL block preferred to wet the surface of a silicon wafer, while the PS block wet the air interface. This asymmetric wetting behavior led to the adsorbed monolayer with a PCL block layer having a thickness of around 4.0 nm. The crystallization of PCL blocks could overwhelm the microphase-separated structure because of the weak segregation. In situ observation of crystal growth indicated that the nucleation process preferred to occur at the edge of the thick parts of the film, that is, the relief structures or droplets. The crystal growth rate was presented by the time dependence of the distance between the tip of crystal clusters and the edge. At 22 and 17 degreesC, the average crystal growth rates were 55 +/- 10 and 18 +/- 4 nm/min, respectively.

Self-assembly of star block copolymers by dynamic density functional theory

The dynamic mean-field density functional method, driven from the generalized time-dependent Ginzburg-Landau equation, was applied to the mesoscopic dynamics of the multi-arms star block copolymer melts in two-dimensional lattice model. The implicit Gaussian density functional expression of a multi-arms star block copolymer chain for the intrinsic chemical potentials was constructed for the first time. Extension of this calculation strategy to more complex systems, such as hyperbranched copolymer or dendrimer, should be straightforward. The original application of this method to 3-arms block copolymer melts in our present works led to some novel ordered microphase patterns, such as hexagonal (HEX) honeycomb lattice, core-shell HEX lattice, knitting pattern, etc. The observed core-shell HEX lattice ordered structure is qualitatively in agreement with the experiment of Thomas [Macromolecules 31, 5272 (1998)].

High PL quantum efficiency of poly(phenylene vinylene) systems through exciton confinement

Photoluminescence (PL) quantum efficiency is a key issue in designing successful light-emitting polymer systems. Exciton relaxation is strongly affected by exciton quenching at nonradiative trapping centers and the formation of excimers. These factors reduce the PL quantum yield of light-emitting polymers. In this work, we have systematically investigated the effects of exciton confinement on the PL quantum yield of an oligomer, polymer, and alternating block copolymer (ABC) PPV system. Time-resolved and temperature-dependent luminescence studies have been performed. The ABC design effectively confine photoexcitations within the chromophores, preventing exciton migration and excimer formation. An unusually high (PL) quantum yield (above 90%) in the solid state is reported for the alternating block copolymer PPV, as compared to that of similar to 30% of the polymer and oligomer model compounds. (C) 2000 Elsevier Science S.A. All rights reserved.

Sequence analysis of Arthrospira maxima based on fosmid library

Arthrospira (Spirulina) (Setchell& Gardner) is an important cyanobacterium not only in its nutritional potential but in its special biological characteristics. An unbiased fosmid library of Arthrospira maxima FACHB438 that contains 4300 clones was constructed. The size distribution of insert fragments is from 15.5 to 48.9 kb and the average size is 37.6 kb. The recombination frequency is 100%. Therefore the library is 29.9 equivalents to the Arthrospira genome size of 5.4 Mb. A total of 719 sample clones were randomly chosen from the library and 602 available sequences, which consisted of 307,547 bases, covering 5.70% of the whole genome. The codon usage of A. maxima was not strongly biased. GC content at the first position of codons (46.9%) was higher than the second (39.8%) and the third (45.5%) positions. GC content of the genome was 43.6%. Of these sequences, 287 (47.7%) showed high similarities to known genes, 63 (10.5%) to hypothetical genes and the remaining 252 (41.8%) had no significant similarities. The assigned genes were classified into 22 categories with respect to different biological roles. Remarkably, the high presence of 25 sequences (4.2%) encoding reverse transcriptase indicates the RT gene may have multiple copies in the A. maxima genome and might play an important role in the evolutionary history and metabolic regulation. In addition, the sequences encoding the ATP-binding cassette transport system and the two-component signal transduction system were the second and third most frequent genes, respectively. These genomic features provide some clues as to the mechanisms by which this organism adapts to the high concentration of bicarbonate and to the high pH environment.