Fatores Associados ao Material Insuficiente em Punção Aspirativa por Agulha Fina nos Nódulos Sólidos da Mama

Objetivo: analisar alguns fatores que possam estar associados à ocorrência de material insuficiente nos aspirados da punção aspirativa por agulha fina (PAAF). Pacientes e Métodos: foram estudadas 351 citologias de pacientes com nódulos sólidos da mama, submetidas a PAAF, como parte de sua investigação diagnóstica. As lâminas foram analisadas por um único citologista, que classificou os esfregaços como malignos, suspeitos, benignos ou material insuficiente para diagnóstico. Foram avaliados a idade da paciente, o tamanho do tumor, o estádio clínico, o Serviço, o dispositivo utilizado na punção e o tipo de lesão puncionada, de acordo com a histologia. A significância de cada variável em relação ao material insuficiente foi testada pelo c². Resultados: houve 67 esfregaços classificados como material insuficiente (19%). O tipo de dispositivo utilizado, o tamanho do tumor, o Serviço e o estádio clínico das lesões não se relacionaram à quantidade de material suficiente ou insuficiente. A idade da paciente e o tipo histológico influenciaram a taxa de material insuficiente, sendo que as pacientes abaixo de 50 anos tiveram uma taxa de 12%, comparada a 30% daquelas acima de 50 anos (p<0,03). Quanto à histologia, nas pacientes com alterações funcionais benignas da mama, a taxa de material insuficiente foi de 30%, seguida daquelas com carcinoma ductal infiltrante, 20%, e, no fibroadenoma, 12% (p<0,02). Conclusão: esse estudo mostrou uma taxa de material insuficiente relativamente alta (19%), a qual foi influenciada pela idade da paciente e pelo tipo histológico da lesão.

Abordagem citogenética e molecular em material de abortos espontâneos

OBJETIVOS: avaliar o desempenho da citogenética e das técnicas de hibridização in situ fluorescente (FISH) e reação em cadeia da polimerase (PCR) no estudo das aneuploidias cromossômicas numéricas e na determinação do sexo fetal em amostras de abortos espontâneos. MÉTODOS: duzentos e dezenove amostras de produtos de abortos espontâneos foram submetidas a estudo citogenético. Deste total, 40 amostras foram também submetidas à técnica de PCR-nested para a determinação do sexo fetal: 32 foram selecionadas devido à falha de crescimento no estudo citogenético e oito foram escolhidas ao acaso. Vinte amostras foram selecionadas para detecção de aneuploidias cromossômicas pela técnica de FISH, utilizando-se sondas para os cromossomos 13, 18, 21, X e Y: 13 casos foram submetidos a FISH devido à falha de crescimento no estudo citogenético e sete foram escolhidos ao acaso. Foi calculada a taxa de sucesso (obtenção de cariótipo) de cada técnica. Para comparação das taxas de sucesso foi utilizado o teste de chi2, sendo considerados significantes resultados com p<0,05. Foi avaliado o índice de acerto entre os resultados das amostras submetidas a mais de um exame, tomando-se como padrão-ouro o resultado do estudo citogenético. RESULTADOS: houve crescimento celular em 84,9% das amostras submetidas a análise citogenética. Em 51,1% dos casos foram encontradas alterações cromossômicas: 65,2% trissomias, 17,9% triploidias, 9,4% tetraploidias, 4,2% monossomia do cromossomo X e 1,1% trissomia dupla, tetrassomia e alteração estrutural. A trissomia mais freqüente foi a do cromossomo 16 (39%). FISH e PCR tiveram taxa de sucesso de 90%, não diferindo significativamente do exame citogenético. Em todos os casos submetidos a mais de um exame os resultados foram concordantes. Nas amostras com falha de crescimento celular no exame citogenético e submetidas a outra técnica, a PCR obteve sucesso em 87,5% e a FISH em 84,6%. CONCLUSÃO: o estudo citogenético de restos ovulares de abortamentos espontâneos teve elevada taxa de sucesso e evidenciou anomalias cromossômicas em mais da metade dos casos. As técnicas de biologia molecular (PCR-nested e FISH) complementaram o estudo citogenético e permitiram a obtenção de resultados seguros na detecção de alterações cromossômicas numéricas e na determinação do sexo fetal.

Infeccoes de transmissao vertical em material abortivo e sangue com enfase em Toxoplasmose gondii

OBJETIVO: Analisar os resultados sorológicos, anatomopatológicos e parasitológicos de material abortivo para infecções com risco de transmissão vertical, com ênfase na toxoplasmose. MÉTODOS: Foi realizado um estudo coorte-transversal tratando da prevalência das doenças infectoparasitárias. Participaram da pesquisa 105 mulheres que sofreram aborto espontâneo completo e/ou incompleto; elas foram entrevistadas por meio de um questionário, e foram coletadas amostras de sangue e material abortivo. Foram realizados testes imunológicos para toxoplasmose, doença de Chagas, rubéola, citomegalovírus e sífilis e análise anatomopatológica nos restos ovulares. RESULTADOS: 55% das mulheres tinham entre 20 e 30 anos de idade. A maioria (68%) apresentou idade gestacional entre a 7ª e a 14ª semanas. 54,3% das mulheres tinham o ensino médio completo ou incompleto. Pela análise da sorologia, a infecção com risco de transmissão vertical mais frequente foi o citomegalovírus (CMV) com 97,1% de positividade, e em seguida a rubéola, com 95,2%. A toxoplasmose teve um percentual de 54,3%, a doença de Chagas, de 1,9% e a sífilis, de 0,95%. A análise dos laudos de biópsia demonstrou que 63,1% apresentaram inflamação e 34%, ausência de inflamação. Das análises sorológica, anatomopatológica e parasitológica das 105 mulheres, 57 foram soropositivas para T. gondii, e nenhuma teve resultado positivo para a Reação em Cadeia da Polimerase (PCR) e para inoculação em camundongos. CONCLUSÕES: A prevalência de doenças com risco de transmissão congênita nas mulheres com abortamento espontâneo é importante, sendo necessárias pesquisas visando esclarecer a etiologia do aborto.

Summaries of lecture recordings used as learning material in blended learning

Julkaisumaa: 530 AN ANT Alankomaiden Antillit

Characterisation of Laser Beam and Paper Material Interaction

It is known already from 1970´s that laser beam is suitable for processing paper materials. In this thesis, term paper materials mean all wood-fibre based materials, like dried pulp, copy paper, newspaper, cardboard, corrugated board, tissue paper etc. Accordingly, laser processing in this thesis means all laser treatments resulting material removal, like cutting, partial cutting, marking, creasing, perforation etc. that can be used to process paper materials. Laser technology provides many advantages for processing of paper materials: non-contact method, freedom of processing geometry, reliable technology for non-stop production etc. Especially packaging industry is very promising area for laser processing applications. However, there are only few industrial laser processing applications worldwide even in beginning of 2010´s. One reason for small-scale use of lasers in paper material manufacturing is that there is a shortage of published research and scientific articles. Another problem, restraining the use of laser for processing of paper materials, is colouration of paper material i.e. the yellowish and/or greyish colour of cut edge appearing during cutting or after cutting. These are the main reasons for selecting the topic of this thesis to concern characterization of interaction of laser beam and paper materials. This study was carried out in Laboratory of Laser Processing at Lappeenranta University of Technology (Finland). Laser equipment used in this study was TRUMPF TLF 2700 carbon dioxide laser that produces a beam with wavelength of 10.6 μm with power range of 190-2500 W (laser power on work piece). Study of laser beam and paper material interaction was carried out by treating dried kraft pulp (grammage of 67 g m-2) with different laser power levels, focal plane postion settings and interaction times. Interaction between laser beam and dried kraft pulp was detected with different monitoring devices, i.e. spectrometer, pyrometer and active illumination imaging system. This way it was possible to create an input and output parameter diagram and to study the effects of input and output parameters in this thesis. When interaction phenomena are understood also process development can be carried out and even new innovations developed. Fulfilling the lack of information on interaction phenomena can assist in the way of lasers for wider use of technology in paper making and converting industry. It was concluded in this thesis that interaction of laser beam and paper material has two mechanisms that are dependent on focal plane position range. Assumed interaction mechanism B appears in range of average focal plane position of 3.4 mm and 2.4 mm and assumed interaction mechanism A in range of average focal plane position of 0.4 mm and -0.6 mm both in used experimental set up. Focal plane position 1.4 mm represents midzone of these two mechanisms. Holes during laser beam and paper material interaction are formed gradually: first small hole is formed to interaction area in the centre of laser beam cross-section and after that, as function of interaction time, hole expands, until interaction between laser beam and dried kraft pulp is ended. By the image analysis it can be seen that in beginning of laser beam and dried kraft pulp material interaction small holes off very good quality are formed. It is obvious that black colour and heat affected zone appear as function of interaction time. This reveals that there still are different interaction phases within interaction mechanisms A and B. These interaction phases appear as function of time and also as function of peak intensity of laser beam. Limit peak intensity is the value that divides interaction mechanism A and B from one-phase interaction into dual-phase interaction. So all peak intensity values under limit peak intensity belong to MAOM (interaction mechanism A one-phase mode) or to MBOM (interaction mechanism B onephase mode) and values over that belong to MADM (interaction mechanism A dual-phase mode) or to MBDM (interaction mechanism B dual-phase mode). Decomposition process of cellulose is evolution of hydrocarbons when temperature is between 380- 500°C. This means that long cellulose molecule is split into smaller volatile hydrocarbons in this temperature range. As temperature increases, decomposition process of cellulose molecule changes. In range of 700-900°C, cellulose molecule is mainly decomposed into H2 gas; this is why this range is called evolution of hydrogen. Interaction in this range starts (as in range of MAOM and MBOM), when a small good quality hole is formed. This is due to “direct evaporation” of pulp via decomposition process of evolution of hydrogen. And this can be seen can be seen in spectrometer as high intensity peak of yellow light (in range of 588-589 nm) which refers to temperature of ~1750ºC. Pyrometer does not detect this high intensity peak since it is not able to detect physical phase change from solid kraft pulp to gaseous compounds. As interaction time between laser beam and dried kraft pulp continues, hypothesis is that three auto ignition processes occurs. Auto ignition of substance is the lowest temperature in which it will spontaneously ignite in a normal atmosphere without an external source of ignition, such as a flame or spark. Three auto ignition processes appears in range of MADM and MBDM, namely: 1. temperature of auto ignition of hydrogen atom (H2) is 500ºC, 2. temperature of auto ignition of carbon monoxide molecule (CO) is 609ºC and 3. temperature of auto ignition of carbon atom (C) is 700ºC. These three auto ignition processes leads to formation of plasma plume which has strong emission of radiation in range of visible light. Formation of this plasma plume can be seen as increase of intensity in wavelength range of ~475-652 nm. Pyrometer shows maximum temperature just after this ignition. This plasma plume is assumed to scatter laser beam so that it interacts with larger area of dried kraft pulp than what is actual area of beam cross-section. This assumed scattering reduces also peak intensity. So result shows that assumably scattered light with low peak intensity is interacting with large area of hole edges and due to low peak intensity this interaction happens in low temperature. So interaction between laser beam and dried kraft pulp turns from evolution of hydrogen to evolution of hydrocarbons. This leads to black colour of hole edges.

Punção aspirativa por agulha fina como método de coleta de material para a histopatologia no osteossarcoma canino

Para a obtenção do diagnóstico definitivo do osteossarcoma realizam-se exames citopatológico e histopatológico. O material para exame citopatológico é coletado através de punção aspirativa por agulha fina (PAAF), já para a realização do exame histopatológico é necessário uma amostra de tamanho maior, geralmente conseguida através de biópsia incisional. Este trabalho tem como objetivo desenvolver uma técnica de coleta de material em cães com suspeita de osteossarcoma através de PAAF para a realização de exame histopatológico. Foram coletadas duas amostras de 12 cães suspeitos de osteossarcoma por PAAF. O material obtido pela primeira coleta foi utilizado para confirmar o diagnóstico através do exame citopatológico, enquanto que o material oriundo da segunda coleta foi fixado em formol a 10% para a análise histopatológica. Quatro das 12 amostras (33,3%) avaliadas histopatologicamente pela metodologia proposta obtiveram também o diagnóstico de osteossarcoma. Esses resultados apontam para uma possível adequação da técnica de coleta de material por PAAF para exame histopatológico.

Effects of infection with Toxoplasma gondii oocysts on the intestinal wall and the myenteric plexus of chicken (Gallus gallus)

This paper aims to analyze the effects of the Toxoplasma gondii infection in the intestinal wall and myenteric plexus of chicken (Gallus gallus). Ten 36-day-old chickens were separated into two groups: control and experimental, orally inoculated with oocysts of the T. gondii strain M7741 genotype III. After 60 days the birds were submitted to euthanasia and had their duodenum removed. Part of the intestinal segments was submitted to histological routine, HE staining, PAS histochemical technique, and Alcian Blue. Qualitative analysis of the intestinal wall and comparative measurements among the groups with respect to total wall thickness, muscle tunic, mucosa, and tunica mucosa were carried out. Caliciform cells were quantified. The other part of the intestinal segments was fixed in formol acetic acid and dissected having the tunica mucosa and the tela submucosa removed. Neurons were stained with Giemsa, counted, and measured. Chickens from the experimental group presented diarrhea and inflammatory infiltrates in the tunica mucosa, thickness reduction of all the parameters assessed in the intestinal wall, and an increase of the number of caliciform cells. There was a ~70% reduction regarding the intensity of myenteric neurons; and the remaining cells presented a reduction of ~2.4% of the perikarion and ~40.5% of the nucleus (p<0.05). Chronic infection induced by T. gondii oocysts resulted in intestinal wall atrophy, mucin secretion increase, death and atrophy of chicken myenteric plexus neurons. Death and atrophy of myenteric plexus neurons may be related with the causes of diarrhea observed in chickens with toxoplasmosis.

Carbon Nanotubes as Material for Supercapacitor Electrodes

Electrochemical double-layer supercapacitors have an intermediate position between rechargeable batteries, which can store high amounts of energy, and dielectric capacitors, which have high output power. Supercapacitors are widely suggested to be used in automobiles (recuperation during braking, facilitate engine starting, electric stabilization of the system), industry (forklifts, elevators), hybrid off-road machinery and also in consumer electronics. Supercapacitor electrodes require highly porous material. Typically, activated carbon is used. Specific surface area of activated carbon is approximately 1000 m2 per gram. Carbon nanotubes represent one of prospective materials. According to numerous studies this material allows to improve the properties of supercapacitors. The task of this Master‘s Thesis was to test multiwalled carbon nanotubes and become confident with the testing methods.

Value added logistics in supply and demand chain : COSTFIX : New operation model for maintenance material logistics in paper industry

This research report illustrates and examines new operation models for decreasing fixed costs and transforming them into variable costs in the field of paper industry. The report illustrates two cases – a new operation model for material logistics in maintenance and an examination of forklift truck fleet outsourcing solutions. Conventional material logistics in maintenance operation is illustrated and some problems related to conventional operation are identified. A new operation model that solves some of these problems is presented including descriptions of procurement and service contracts and sources of added value. Forklift truck fleet outsourcing solutions are examined by illustrating the responsibilities of a host company and a service provider both before and after outsourcing. The customer buys outsourcing services in order to improve its investment productivity. The mechanism of how these services affect the customer company’s investment productivity is illustrated.

Cytoskeletal proteins in the follicular wall of normal andcystic ovaries of sows

The expression of cytoskeletal proteins was evaluated immunohistochemically in 36 normal ovaries sampled from 18 sows and 44 cystic ovaries sampled from of 22 sows, was evaluated. All sows had history of reproductive problems, such as infertility or subfertility. The immunohistochemically stained area (IHCSA) was quantified through image analysis to evaluate the expression of these proteins in the follicular wall of secondary, tertiary, and cystic follicles. Cytokeratins (CK) immunoreactivity was strong in the granulosa cell layer (GC) and mild in the theca interna (TI) and externa (TE) of the normal follicles. There was severe reduction of the reaction to CK in the GC in the cystic follicles, mainly in the luteinized cysts. The immunoreactivity for vimentin was higher in the GC from normal and cystic follicles in contrast with the other follicular structures. In the luteinized cysts, the IHCSA for vimentin was significantly higher in TI and in both observed cysts, the labeling was more accentuated in TE. Immunohistochemical detection of desmin and α-SMA was restricted to the TE, without differences between the normal and cystic follicles. The results of the current study show that the development of ovarian cysts in sows is associated to changes in the expression of the cytoskeletal proteins CK and vimentin.

Critical aspects on the behavior of material from the mechanical tool-workpiece interaction in single point diamond turning

Some material aspects such as grain size, purity and anisotropy exert an important influence on surface quality, especially in single point diamond turning. The aim of this paper is to present and discuss some critical factors that can limit the accuracy of ultraprecision machining of non-ferrous metals and to identify the effects of them on the cutting mechanism with single point diamond tools. This will be carried out through observations of machined surfaces and chips produced using optical and scanning electron microscopy. Solutions to reduce the influence of some of these limiting factors related with the mechanism of generation of mirror-like surfaces will be discussed.

A law of the wall formulation for recirculating flows

This work presents a new law of the wall formulation for recirculating turbulent flows. An alternative expression for the internal length which can be applied in the separated region is also presented. The formulation is implemented in a numerical code which solves the k-epsilon model through a finite volume method. The theoretical results are compared with the experimental data of Vogel and Eaton (J. of Heat Transfer, Transactions of ASME, vol.107, pp. 922-929, 1985). The paper shows that the present formulation furnishes better results than the standard k-epsilon formulation.

Static pressure and wall shear stress distributions in air flow in a seven wire-wrapped rod bundle

An experimental investigation is performed in a turbulent flow in a seven wire-wrapped rod bundle, mounted in an open air facility. Static pressure distributions are measured on central and peripheral rods. By using a Preston tube, the wall shear stress profiles are experimentally obtained along the perimeter of the rods. The geometric parameters of the test section are P/D=1.20 and H/D=15. The measuring section is located at L/D=40 from the air inlet. It is observed that the dimensionless static pressure and wall shear stress profiles are nearly independent of the Reynolds number and strongly dependent of the wire-spacer position, with abrupt variations of the parameters in the neighborhood of the wires.

Buckling analysis of PVC sheets with RIB

This study has a technical and applied character. A PVC structured wall pipe can be produced by spirally winding a ribbed sheet having a male-female lock, chemically welded by an adhesive. These pipes are "flexible" and are used mainly in underground installations, to convey fluids in free duct regime. Initial studies have indicated that the buckling resistance of the ribs from the sheet coiling to the tube manufacturing is the critical design parameter. This study presents the theoretical analytical development in order to obtain the critical buckling moment of these sheets. This analysis uses concepts initially developed to calculate buckling resistance in monosymmetrical profiles that are very used in the metallic structure industry. Since the material used was PVC, that has different mechanical properties than steel and aluminum, it was necessary to consider the differences in the analytical treatment. It is important to emphasize that the results obtained are product of the co-operative work of engineers from industry and university.