Evolución y retos de la educación virtual : construyendo el e-learning del siglo XXI

Las autoras y autores de este libro ofrecen una descripción de la evolución general del e-learning apuntando los elementos clave hacia los que debe ir evolucionando. Parten de la experiencia y la práctica contrastada con las investigaciones sobre el tema. A lo largo de los distintos capítulos nos muestran cómo vive un estudiante virtual, su papel y la manera en que plantea y organiza sus actividades; nos acercan al profesorado analizando su rol en el diseño de la formación y la comunicación con los estudiantes; hablan de la colaboración, analizando cómo diseñar actividades colaborativas y señalando sus ventajas y límites; describen los diferentes recursos de aprendizaje que podemos disponer en el diseño de los cursos y, por último, acompañan nuestra mirada hacia el futuro próximo analizando las tendencias y los retos a los que debemos hacer frente para construir el e-learning del siglo XXI.

AulaCEP : experiencia de un entorno virtual de aprendizaje en un centro educativo presencial

En este trabajo se presenta un conjunto dereflexiones y conclusiones alrededor del proceso de formación del profesorado y personal no docente en el uso de un LMS (Learning Management System)en un centro educativo, y el proceso de implantación de dicho sistema. En el entorno presencial de aprendizaje del Centre d'Estudis Politècnics, en adelante CEP, es necesario facilitar la comunicación y el acceso a los recursos entre los miembros de la comunidad, no sólo por parte de los estudiantes para localizar recursos docentes y facilitar la comunicación con sus profesores, sino también para facilitar la reusabilidad e intercambio de los materiales, la comunicación entre docentes y el resto del personal del centro educativo, secretaria,administración, departamento de calidad y bolsa detrabajo, así como la interacción entre profesores y estudiantes y de éstos entre sí.

Towards Innovative Virtual Learning in Vocational Teacher Education: Narratives as a Form of Meaningful Learning

http://www.eurodl.org/.

Transcending the self in immersive virtual reality

Cognitive neuroscientists have discovered various experimental setups that suggest that our body representation is surprisingly flexible, where the brain can easily be tricked into the illusion that a rubber hand is your hand or that a manikin body is your body. These multisensory illusions work well in immersive virtual reality (IVR). What is even more surprising is that such embodiment induces perceptual, attitudinal and behavioural changes that are concomitant with the displayed body type. Here we outline some recent findings in this field, and suggest that this offers a powerful tool for neuroscience, psychology and a new path for IVR.

Ba in Virtual Communities

Virtual communities – interactive networks in cyberspace seasoned with feelings – are a highly topical research theme. Besides academics, more and more companies ponder upon the nature and implications of the sense of virtual communities. This thesis takes a novel viewpoint on this research and examines virtual communities from virtual ba perspective. Ba is the space – in this case a virtual and a mental one, where knowledge based interaction occurs. The aim of this thesis is to clarify the concept of virtual ba, and the development and appearance of ba in virtual communities. The scientific contribution of this qualitative case study is conceptual clarification and validation of the concept of virtual ba. The empirical part of the thesis examines blogs: Internet-based communication media, using data triangulation (observation, narratives and a thematic interview). The thesis provides insights into the development of virtual ba that has also managerial relevance.

Efficacy of virtual reality for triggering smoking craving: relation with level of presence and nicotine dependence

Virtual Reality environments that reproduce typical contexts associated with tobacco use may be useful for aiding smoking cessation. The main objective of this study was to assess the capacity of eight environments to produce the craving to smoke and determine the relation of craving to nicotine dependence and level of presence. The results show that all the environments were able to generate the desire to smoke; a direct relation was found between sense of presence and craving.

Predictors of smoking craving during virtual reality exposure

Cue exposure treatment (CET) consists of controlled and repeated exposure to drugrelated stimuli in order to reduce cue-reactivity. Virtual reality (VR) has proved to be a promising tool for exposition. However, identifying the variables that can modulate the efficacy of this technique is essential for selecting the most appropriate exposure modality. The aim of this study was to determine the relation between several individual variables and self-reported craving in smokers exposed to VR environments. Fortysix smokers were exposed to seven complex virtual environments that reproduce typical situations in which people smoke. Self-reported craving was selected as the criterion variable and three types of variables were selected as the predictor variables: related to nicotine dependence, related to anxiety and impulsivity, and related to the sense of presence in the virtual environments. Sense of presence was the only predictor of self-reported craving in all the experimental virtual environments. Nicotine dependence variables added predictive power to the model only in the virtual breakfast at home. No relation was found between anxiety or impulsivity and self-reported craving. Virtual reality technology can be very helpful for improving CET for substance use disorders. However, the use of virtual environments would make sense only insofar as the sense of presence was high. Otherwise, the effectiveness of exposure might be affected. © 2012 by the Massachusetts Institute of Technology.

Anisotropic surface properties of micro/nanostructured a-C:H:F thin films with self-assembly applications

The singular properties of hydrogenated amorphous carbon (a-C:H) thin filmsdeposited by pulsed DC plasma enhanced chemical vapor deposition (PECVD), such as hardness and wear resistance, make it suitable as protective coating with low surface energy for self-assembly applications. In this paper, we designed fluorine-containing a-C:H (a-C:H:F) nanostructured surfaces and we characterized them for self-assembly applications. Sub-micron patterns were generated on silicon through laser lithography while contact angle measurements, nanotribometer, atomic force microscopy (AFM), and scanning electron microscopy (SEM) were used to characterize the surface. a-C:H:F properties on lithographied surfaces such as hydrophobicity and friction were improved with the proper relative quantity of CH4 and CHF3 during deposition, resulting in ultrahydrophobic samples and low friction coefficients. Furthermore, these properties were enhanced along the direction of the lithographypatterns (in-plane anisotropy). Finally, self-assembly properties were tested with silicananoparticles, which were successfully assembled in linear arrays following the generated patterns. Among the main applications, these surfaces could be suitable as particle filter selector and cell colony substrate.

Sistemas de experto galénicos. De la galénica tradicional a la galénica virtual: El papel de los sistemas de experto en la tecnología farmacéutica

Discurso de entrada a la Reial Acadèmia deFarmàcia de Catalunya, Barcelona. 04 de mayo de 2015

Assembly Methods of Permanent Magnets for Synchronous Generators

This thesis examines and explains the procedure used to redesign the attachment of permanent magnets to the surface of the rotor of a synchronous generator. The methodology followed to go from the actual assembly to converge to the final purposed innovation was based on the systematic approach design. This meant that first a series of steps had to be predefined as a frame of reference later to be used to compare and select proposals, and finally to obtain the innovation that was sought. Firstly, a series of patents was used as the background for the upcoming ideas. To this end, several different patented assemblies had been found and categorized according the main element onto which this thesis if focused, meaning the attachment element or method. After establishing the technological frame of reference, a brainstorm was performed to obtain as many ideas as possible. Then these ideas were classified, regardless of their degree of complexity or usability, since at this time the quantity of the ideas was the important issue. Subsequently, they were compared and evaluated from different points of view. The comparison and evaluation in this case was based on the use of a requirement list, which established the main needs that the design had to fulfill. Then the selection could be done by grading each idea in accordance with these requirements. In this way, one was able to obtain the idea or ideas that best fulfilled these requirements. Once all of the ideas were compared and evaluated, the best or most suitable idea or ideas were separated. Finally, the selected idea or ideas was/were analyzed in extension and a number of improvements were made. Consequently, a final idea was refined and made more suitable at its performance, manufacture, and life cycle assessment. Therefore, in the end, the design process gave a solution to the problem pointed out at the beginning.

Brain-Computer Interfaces, Virtual Reality, and Videogames

Major challenges must be tackled for brain-computer interfaces to mature into an established communications medium for VR applications, which will range from basic neuroscience studies to developing optimal peripherals and mental gamepads and more efficient brain-signal processing techniques.

Brain Computer Interface for Virtual Reality Control

A brain-computer interface (BCI) is a new communication channel between the human brain and a computer. Applications of BCI systems comprise the restoration of movements, communication and environmental control. In this study experiments were made that used the BCI system to control or to navigate in virtual environments (VE) just by thoughts. BCI experiments for navigation in VR were conducted so far with synchronous BCI and asynchronous BCI systems. The synchronous BCI analyzes the EEG patterns in a predefined time window and has 2 to 3 degrees of freedom.

Cue-elicited anxiety and craving for food using virtual reality scenarios

Cue exposure therapy has been reported to be an effective intervention for reducing binge eating behavior in patients with eating disorders and obesity. However, in vivo food exposure conducted in the therapist's office presents logistical problems and lacks ecological validity. This study proposes the use of virtual reality technology as an alternative to in vivo exposure, and assesses the ability of different virtual environments to elicit anxiety and craving for food in a non-clinical sample. The results show that exposure to virtual environments provokes changes in reported craving for food. High-calorie food cues are the ones that elicit the highest increases in craving.

Differential effects of two virtual reality interventions: distraction versus pain control

There is evidence that virtual reality (VR) pain distraction is effective at improving pain-related outcomes. However, more research is needed to investigate VR environments with other pain-related goals. The main aim of this study was to compare the differential effects of two VR environments on a set of pain-related and cognitive variables during a cold pressor experiment. One of these environments aimed to distract attention away from pain (VRD), whereas the other was designed to enhance pain control (VRC). Participants were 77 psychology students, who were randomly assigned to one of the following three conditions during the cold pressor experiment: (a) VRD, (b) VRC, or (c) Non-VR (control condition). Data were collected regarding both pain-related variables (intensity, tolerance, threshold, time perception, and pain sensitivity range) and cognitive variables (self-efficacy and catastrophizing). Results showed that in comparison with the control condition, the VRC intervention significantly increased pain tolerance, the pain sensitivity range, and the degree of time underestimation. It also increased self-efficacy in tolerating pain and led to a reduction in reported helplessness. The VRD intervention significantly increased the pain threshold and pain tolerance in comparison with the control condition, but it did not affect any of the cognitive variables. Overall, the intervention designed to enhance control seems to have a greater effect on the cognitive variables assessed. Although these results need to be replicated in further studies, the findings suggest that the VRC intervention has considerable potential in terms of increasing self-efficacy and modifying the negative thoughts that commonly accompany pain problems.