Spectrophotometric determination of diclofenac in pharmaceutical preparations assisted by microwave oven

In this work, an effective and low-cost method for the determination of sodium or potassium diclofenac is proposed in its pure form and in their pharmaceutical preparations. The method is based on the reaction between diclofenac and tetrachloro-p-benzoquinone (p-chloranil), in methanol medium. This reaction was accelerated by irradiating of reactional mixture with microwave energy (1100 W) during 27 seconds, producing a charge transfer complex with a maximum absorption at 535 nm. The optimal reaction conditions values such as reagent concentration, heating time and stability of the reaction product were determined. Beer's law is obeyed in a concentration range from of 1.25x10-4 to 2.00x10-3 mol l-1 with a correlation coefficient of 0.9993 and molar absorptivity of 0.49 x10³ l mol-1 cm-1. The limit of detection (LOD) was 1.35x10-5 mol l-1 and the limit of quantification (LOQ) was 4.49x10-5 mol l-1. In the presence of the common excipients, such as glucose, lactose, talc, starch, magnesium stearate, sodium sulphite, titanium dioxide, polyethyleneglycol, polyvinylpirrolidone, mannitol and benzilic alcohol no interferences were observed. The analytical results obtained by applying the proposed method compare very favorably with those given by the United States Pharmacopeia standard procedure. Recoveries of diclofenac from various pharmaceutical preparations were within 95.9% to 103.3%, with standard deviations ranging from 0.2% to 1.8%.

Computational visual quality of digitally printed images

The problem of understanding how humans perceive the quality of a reproduced image is of interest to researchers of many fields related to vision science and engineering: optics and material physics, image processing (compression and transfer), printing and media technology, and psychology. A measure for visual quality cannot be defined without ambiguity because it is ultimately the subjective opinion of an “end-user” observing the product. The purpose of this thesis is to devise computational methods to estimate the overall visual quality of prints, i.e. a numerical value that combines all the relevant attributes of the perceived image quality. The problem is limited to consider the perceived quality of printed photographs from the viewpoint of a consumer, and moreover, the study focuses only on digital printing methods, such as inkjet and electrophotography. The main contributions of this thesis are two novel methods to estimate the overall visual quality of prints. In the first method, the quality is computed as a visible difference between the reproduced image and the original digital (reference) image, which is assumed to have an ideal quality. The second method utilises instrumental print quality measures, such as colour densities, measured from printed technical test fields, and connects the instrumental measures to the overall quality via subjective attributes, i.e. attributes that directly contribute to the perceived quality, using a Bayesian network. Both approaches were evaluated and verified with real data, and shown to predict well the subjective evaluation results.

Outsourcing process in pharmaceutical product development

The aim of this study was to create an outsourcing process for pharmaceutical product development. This study focuses on two main questions. The first question is “What is the outsourcing process model?” In the second phase key success factors of the outsourcing process are identified. As a result of the literature reviews, a general outsourcing process was created. Transaction cost economics and resource based view were used to derived a theoretical framework to the process by combining the existing processes presented in the literature. The model of process is considered used to the outsourcing broadly. The general outsourcing process was then developed further with the key factors that affect the success of pharmaceutical product development and the interviews of pharmaceutical outsourcing experts. The result of the research was the process consists of seven phases with key activities and expected outputs for each of the phases. In addition, the strategic decision-making framework for outsourcing decision in pharmaceutical product development is giving as well as the tools for selecting supplier and preparing structured contract. This study also gives some recommendations for managing the outsourcing process.

Polarographic study and electrode kinetics of [Zn(II) - antibiotics - cephaloglycin] system vis a vis kinetics of electrode reactions

Electrode kinetics and complex formation of Zn(II) using doxycycline, chlortetracycline, oxytetracycline, tetracycline, minocycline, amoxicillin, chloramphenicol and cephaloglycin were reported at pH = 7.30 ± 0.01 in = 1.0 molL-1 NaClO4 used as supporting electrolyte at 25.0°C. Kinetic parameters viz. transfer coefficient (α), degree of irreversibility (λ) and rate constant (k) were determined. The study showed that 'Transition state' behaves between reactant (O) and product (R) response to applied potential. The stability constants varied from 2.14 to 10.31 showing that these drugs or their complexes could be used against Zn toxicity.

Role of culture in knowledge transfer and sharing - case ERP implementation

The main objective of this study was to examine how culture influences knowledge transfer and sharing within multicultural ERP project implementation in China. The main interest was to explain how national culture and knowledge are linked by understanding how culture influences knowledge transfer and sharing in a project organization. The other objective of this work was to discuss what Chinese cultural characteristic inhibit and en-hance knowledge sharing in ERP project. The perspective of this study was qualitative and the empirical material was collected from theme interviews among Stora Enso employees. Conclusion of this thesis is that Finns have a very direct style of communication and sharing knowledge whereas Chinese respect face shaving and indirect communication. Another conclusion is that knowledge sharing does not “just happen”, it is needed that project members understand national culture to get all project members commitment to project. In China most important is understand local business processes and understand role of trust and guanxi.

Product costing model for laser welded hollow core steel panels

The aim of the study was to create an easily upgradable product costing model for laser welded hollow core steel panels to help in pricing decisions. The theory section includes a literature review to identify traditional and modern cost accounting methodologies, which are used by manufacturing companies. The theory section also presents the basics of steel panel structures and their manufacturing methods and manufacturing costs based on previous research. Activity-Based costing turned out to be the most appropriate methodology for the costing model because of wide product variations. Activity analysis and the determination of cost drivers based on observations and interviews were the key steps in the creation of the model. The created model was used to test how panel parameters affect the costs caused by the main manufacturing stages and materials. By comparing cost structures, it was possible to find the panel types that are the most economic and uneconomic to manufacture. A sensitivity analysis proved that the model gives sufficiently reliable cost information to support pricing decisions. More reliable cost information could be achieved by determining the cost drivers more accurately. Alternative methods for manufacturing the cores were compared with the model. The comparison proved that roll forming can be more advantageous and flexible than press brake bending. However, more extensive research showed that roll forming is possible only when the cores are designed to be manufactured by roll forming. Due to that fact, when new panels are designed consideration should be given to the possibility of using roll forming.

Examining the Role of Rebranding in Perceived Image of a Product Line

The main objective for this study was to explore certain organization’s product line rebranding process and its impact on product line’s perceived image. The case company is a global paper, packaging and forest products company, business segment paper board. The audience explored is one of the company’s major customers, merchant in Germany. The research was performed as a descriptive case study with a purpose to provide longitudinal insight into the product line image and its eventual alteration as a result of the case company’s rebranding process. Mainly qualitative methods were used for conducting the research. The data for the empirical part was collected with a web-based survey at two different points of time; before the rebranded products entered the market and after they had been available approximately six months. The results of this study reveal that the case company has performed well in its attempt to improve product line’s brand image through rebranding. It was found that between the two brand image measurements the product brand image seems to have improved in all of the areas which according to theoretical framework of this study contribute to formation of brand image; brand associations, marketing communications and interpersonal relationships, not forgetting the original platform that initiated the change; technical quality modifications. In other words it may be concluded that as technical quality was brought to a new level, also assessments about the brand image improved respectively.

Uutto-olosuhteiden vaikutus kasviperäisen indigon saantoon

Indigo on väriaine, jota valmistetaan petrokemianteollisuuden välituotteena syntyvästä aniliinista. Indigolla on kuitenkin pitkä historia. Sitä on valmistettu perinteisesti eri viljelykasveista, joista Euroopassa merkittävin on ollut morsinko. Luonnonmukaisten tuotteiden suosion kasvaessa on ryhdytty selvittämään morsingon viljelyn potentiaalia. Viljelyn kannattavuuden kannalta olennaista on kasvin lehdissä esiintyvien indigon esiasteiden mahdollisimman täydellinen eristäminen. Indigoa tuotetaan uuttamalla indigon esiasteet veteen. Esiasteet hajoavat synnyttäen indoksyyliä, josta hapen vaikutuksella muodostuu indigoa. Syntynyt indigo saostuu ja laskeutuu pohjalle. Samalla kuitenkin tapahtuu epätoivottuja sivureaktioita, jotka vähentävät indigon saantoa. Tutkimuksen tavoitteena oli laboratorio- ja kenttäkokeiden avulla löytää indigon saantoa parantavat uutto-olosuhteet. Kokeiden perusteella havaittiin, että indigon saantoon vaikuttavat positiivisesti pH:n laskeminen, lämpötilan nostaminen, morsingon lehtien pilkkominen ja uuttoliuoksen sekoittaminen. Uuttoliuoksen suolapitoisuuden havaittiin puolestaan vaikuttavan indigon saantoon negatiivisesti. Laboratoriokokeiden perusteella havaittu pH:n laskemisen vaikutus indigon saantoon todistettiin myös kenttäolosuhteissa. Kokeiden havaintojen perusteella esitettiin olosuhteiden indigosaantoa parantavien vaikutusten johtuvan kahdesta tekijästä: indoksyylin stabiloitumisesta happamassa ympäristössä, jolloin sivureaktioiden osuus vähenee, sekä aineensiirron paranemisella sekoituksen, faasien rajapinnan kasvamisen ja etenkin lehtien vahakerroksen rikkoutumisen kuuman veden ja hapon vaikutuksesta.

Leaf-Targeted Ferredoxin-NADP+-Oxidoreductase (FNR): Electron Transfer Properties and Thylakoid Association in Arabidopsis thaliana

Photosynthetic reactions are divided in two parts: light-driven electron transfer reactions and carbon fixation reactions. Electron transfer reactions capture solar energy and split water molecules to form reducing energy (NADPH) and energy-carrying molecules (ATP). These end-products are used for fixation of inorganic carbon dioxide into organic sugar molecules. Ferredoxin-NADP⁺ oxidoreductase (FNR) is an enzyme that acts at the branch point between the electron transfer reactions and reductive metabolism by catalyzing reduction of NADP+ at the last step of the electron transfer chain. In this thesis, two isoforms of FNR from A rabidopsis thaliana, FNR1 and FNR2, were characterized using the reverse genetics approach. The fnr1 and fnr2 mutant plants resembled each other in many respects. Downregulation of photosynthesis protected the single fnr mutant plants from excess formation of reactive oxygen species (ROS), even without significant upregulation of antioxidative mechanisms. Adverse growth conditions, however, resulted in phenotypic differences between fnr1 and fnr2. While fnr2 plants showed downregulation of photosynthetic complexes and upregulation of antioxidative mechanisms under low-temperature growth conditions, fnr1 plants had the wild-type phenotype, indicating that FNR2 may have a specific role in redistribution of electrons under unfavorable conditions. The heterozygotic double mutant (fnr1xfnr2) was severely devoid of chloroplastic FNR, which clearly restricted photosynthesis. The fnr1xfnr2 plants used several photoprotective mechanisms to avoid oxidative stress. In wild-type chloroplasts, both FNR isoforms were found from the stroma, the thylakoid membrane, and the inner envelope membrane. In the absence of the FNR1 isoform, FNR2 was found only in the stroma, suggesting that FNR1 and FNR2 form a dimer, by which FNR1 anchors FNR2 to the thylakoid membrane. Structural modeling predicted formation of an FNR dimer in complex with ferredoxin. In this thesis work, Tic62 was found to be the main protein that binds FNR to the thylakoid membrane, where Tic62 and FNR formed high molecular weight complexes. The formation of such complexes was shown to be regulated by the redox state of the chloroplast. The accumulation of Tic62-FNR complexes in darkness and dissociation of complexes from the membranes in light provide evidence that the complexes may have roles unrelated to photosynthesis. This and the high viability of fnr1 mutant plants lacking thylakoid-bound FNR indicate that the stromal pool of FNR is photosynthetically active.

Effect of hydrodynamics on modelling, monitoring and control of crystallization

Crystallization is a purification method used to obtain crystalline product of a certain crystal size. It is one of the oldest industrial unit processes and commonly used in modern industry due to its good purification capability from rather impure solutions with reasonably low energy consumption. However, the process is extremely challenging to model and control because it involves inhomogeneous mixing and many simultaneous phenomena such as nucleation, crystal growth and agglomeration. All these phenomena are dependent on supersaturation, i.e. the difference between actual liquid phase concentration and solubility. Homogeneous mass and heat transfer in the crystallizer would greatly simplify modelling and control of crystallization processes, such conditions are, however, not the reality, especially in industrial scale processes. Consequently, the hydrodynamics of crystallizers, i.e. the combination of mixing, feed and product removal flows, and recycling of the suspension, needs to be thoroughly investigated. Understanding of hydrodynamics is important in crystallization, especially inlargerscale equipment where uniform flow conditions are difficult to attain. It is also important to understand different size scales of mixing; micro-, meso- and macromixing. Fast processes, like nucleation and chemical reactions, are typically highly dependent on micro- and mesomixing but macromixing, which equalizes the concentrations of all the species within the entire crystallizer, cannot be disregarded. This study investigates the influence of hydrodynamics on crystallization processes. Modelling of crystallizers with the mixed suspension mixed product removal (MSMPR) theory (ideal mixing), computational fluid dynamics (CFD), and a compartmental multiblock model is compared. The importance of proper verification of CFD and multiblock models is demonstrated. In addition, the influence of different hydrodynamic conditions on reactive crystallization process control is studied. Finally, the effect of extreme local supersaturation is studied using power ultrasound to initiate nucleation. The present work shows that mixing and chemical feeding conditions clearly affect induction time and cluster formation, nucleation, growth kinetics, and agglomeration. Consequently, the properties of crystalline end products, e.g. crystal size and crystal habit, can be influenced by management of mixing and feeding conditions. Impurities may have varying impacts on crystallization processes. As an example, manganese ions were shown to replace magnesium ions in the crystal lattice of magnesium sulphate heptahydrate, increasing the crystal growth rate significantly, whereas sodium ions showed no interaction at all. Modelling of continuous crystallization based on MSMPR theory showed that the model is feasible in a small laboratoryscale crystallizer, whereas in larger pilot- and industrial-scale crystallizers hydrodynamic effects should be taken into account. For that reason, CFD and multiblock modelling are shown to be effective tools for modelling crystallization with inhomogeneous mixing. The present work shows also that selection of the measurement point, or points in the case of multiprobe systems, is crucial when process analytical technology (PAT) is used to control larger scale crystallization. The thesis concludes by describing how control of local supersaturation by highly localized ultrasound was successfully applied to induce nucleation and to control polymorphism in reactive crystallization of L-glutamic acid.

External knowledge transfer mechanisms in service business acquisition

In knowledge-intensive economy an effective knowledge transfer is a part of the firm’s strategy to achieve a competitive advantage in the market. Knowledge transfer related to a variety of mechanisms depends on the nature of knowledge and context. The topic is, however, very little empirical studied and there is a research gap in scientific literature. This study examined and analyzed external knowledge transfer mechanisms in service business and especially in the context of acquisitions. The aim was to find out what kind of mechanisms was used when the buyer began to transfer data e.g. their own agendas and practices to the purchased units. Another major research goal was to identify the critical factors which contributed to knowledge transfer through different mechanisms. The study was conducted as a multiple-case study in a consultative service business company, in its four business units acquired by acquisition, in various parts of the country. The empirical part of the study was carried out as focus group interviews in each unit, and the data were analyzed using qualitative methods. The main findings of this study were firstly the nine different knowledge transfer mechanisms in service business acquisition: acquisition management team as an initiator, unit manager as a translator, formal training, self-directed learning, rooming-in, IT systems implementation, customer relationship management, codified database and ecommunication. The used mechanisms brought up several aspects as giving the face to changing, security of receiving right knowledge and correctly interpreted we-ness atmosphere, and orientation to use more consultative touch with customers. The study pointed out seven critical factors contributed to different mechanisms: absorption, motivation, organizational learning, social interaction, trust, interpretation and time resource. The two last mentioned were new findings compared to previous studies. Each of the mechanisms and the related critical factors contributed in different ways to the activity in different units after the acquisition. The role of knowledge management strategy was the most significant managerial contribution of the study. Phenomenon is not recognized enough although it is strongly linked in knowledge based companies. The recognition would help to develop a better understanding of the business through acquisitions, especially in situations such as where two different knowledge strategies combines in new common company.

Hybridityökoneiden markkinapotentiaali

Työn tavoitteena on selvittää menetelmiä hybridityökoneiden markkinapotentiaalin määrittämiseen, työkonemarkkinoiden kokoa ja kasvupotentiaalia, hybridityökoneiden markkinapotentiaalia sekä uuden teknologian kaupallistamisen teorioita. Vuonna 2010 liikkuvien työkoneiden markkinat arvioitiin olevan noin 94–98 miljardia dollaria. Markkinat kasvavat keskimäärin noin 5 prosenttia vuodessa. Alan suurimmat markkinat löytyvät Kiinasta, Euroopasta ja Yhdysvalloista.Hybridityökoneiden markkinapotentiaalia Kiinassa nostaa markkinoiden suuri koko ja nopea kasvuvauhti. Yhdysvaltojen valtti on tukijärjestelmät jotka parantavat hybridiratkaisujen kilpailukykyä. Euroopan potentiaalia nostavat tiukat päästönormit sekä korkea polttoaineen hinta. Markkinapotentiaalin määrittämisen on olemassa useita matemaattisia menetelmiä. Niiden soveltamista hybridityökoneisiin rajoittaa eniten riittävän datan hankinnan haasteellisuus. Vertailemalla yrityksiä teknologian kaupallistamisen teorioissa esiteltyjen menestystä edistävien piirteiden suhteen on teknisen ratkaisun kehittäjän mahdollista valita paras mahdollinen yhteistyökumppani. Soveltamalla kaupallistamisprosessissa kurinalaista mallia, johon kuuluvat sekä teknologiaettä tuotekehitys ja niiden välillä teknologiansiirtovaihe, on teknisen ratkaisun soveltaminen hybriditeknologiaan ja työkoneisiin mahdollista toteuttaa onnistuneesti ja tuoda siten markkinoille kaupallisesti kilpailukykyinen tuote.

Complexity Optimization in Product Development with Modularization

A company’s competence to manage its product portfolio complexity is becoming critically important in the rapidly changing business environment. The continuous evolvement of customer needs, the competitive market environment and internal product development lead to increasing complexity in product portfolios. The companies that manage the complexity in product development are more profitable in the long run. The complexity derives from product development and management processes where the new product variant development is not managed efficiently. Complexity is managed with modularization which is a method that divides the product structure into modules. In modularization, it is essential to take into account the trade-off between the perceived customer value and the module or component commonality across the products. Another goal is to enable the product configuration to be more flexible. The benefits are achieved through optimizing complexity in module offering and deriving the new product variants more flexibly and accurately. The developed modularization process includes the process steps for preparation, mapping the current situation, the creation of a modular strategy and implementing the strategy. Also the organization and support systems have to be adapted to follow-up targets and to execute modularization in practice.

The Role of Tactical Marketing Decisions on New Product Performance: The Moderating Effect of Entry Timing

This study focuses on observing how Finnish companies execute their new product launch processes. The main objective was to find out how entry timing moderates the relationship between launch tactics (namely product innovativeness, price and emotional advertising) and new product performance (namely sales volume and customer profitability). The empirical analysis was based on data collected in Lappeenranta University of Technology. The sample consisted of Finnish companies representing different industries and innovation activities. Altogether 272 usable responses were received representing a response rate of 37.67%. The measures were first assessed by using exploratory factor analysis (EFA) in PASW Statistics 18 and then further verified with confirmatory factor analysis (CFA) in LISREL 8.80. To test the hypotheses of the moderating effects of entry timing, hierarchical regression analysis was used in PASW Statistics 18. The results of the study revealed that the effect of product innovativeness on new product sales volume is dependent on entry timing. This implies that companies should carefully consider what would be the best time for entering the market when launching highly innovative new products. The results also depict a positive relationship between emotional advertising and new product sales volume. In addition, partial support was found for a positive relationship between pricing and new product customer profitability.

Integrating environmental aspects into product development process

Various regulations and customer requirements have made it necessary for Vacon Oyj to pay more attention to the environmental aspects in its processes. The main purpose of this master’s thesis project is to define how environmental aspects could be integrated into Vacon’s product development process. The aim is to find out the most important environmental aspects for the company to address, to examine how these could be taken into account during the development process and to map the critical factors that need consideration in order to ensure the successful integration of environmental aspects into the design process. Based on the customer requirements and evolving regulations the most important aspects for Vacon include minimizing the amount of harmful substances, improving the recyclability and energy efficiency of the product and moreover providing meaningful information related to these aspects. To tackle these issues, a new DfE process was developed, tasks in each phase were described and responsibilities were indicated. To ensure the success of the DfE process, management commitment, support of other processes and significant improvements in ways the information is managed are required. The developers should be provided with training and support. Environmental expertise and knowledge in-house should be developed and establishing meaningful environmental indicators is suggested.