An absolute method for the determination of surface tension of liquids using pendent drop profiles

Drop formation at conical tips which is of relevance to metallurgists is investigated based on the principle of minimization of free energy using the variational approach. The dimensionless governing equations for drop profiles are computer solved using the fourth order Runge-Kutta method. For different cone angles, the theoretical plots of XT and ZT vs their ratio, are statistically analyzed, where XT and ZT are the dimensionless x and z coordinates of the drop profile at a plane at the conical tip, perpendicular to the axis of symmetry. Based on the mathematical description of these curves, an absolute method has been proposed for the determination of surface tension of liquids, which is shown to be preferable in comparison with the earlier pendent-drop profile methods.

Time dependence of effective slip on textured hydrophobic surfaces

In this paper, we present results on water flow past randomly textured hydrophobic surfaces with relatively large surface features of the order of 50 µm. Direct shear stress measurements are made on these surfaces in a channel configuration. The measurements indicate that the flow rates required to maintain a shear stress value vary substantially with water immersion time. At small times after filling the channel with water, the flow rates are up to 30% higher compared with the reference hydrophilic surface. With time, the flow rate gradually decreases and in a few hours reaches a value that is nearly the same as the hydrophilic case. Calculations of the effective slip lengths indicate that it varies from about 50 µm at small times to nearly zero or “no slip” after a few hours. Large effective slip lengths on such hydrophobic surfaces are known to be caused by trapped air pockets in the crevices of the surface. In order to understand the time dependent effective slip length, direct visualization of trapped air pockets is made in stationary water using the principle of total internal reflection of light at the water-air interface of the air pockets. These visualizations indicate that the number of bright spots corresponding to the air pockets decreases with time. This type of gradual disappearance of the trapped air pockets is possibly the reason for the decrease in effective slip length with time in the flow experiments. From the practical point of usage of such surfaces to reduce pressure drop, say, in microchannels, this time scale of the order of 1 h for the reduction in slip length would be very crucial. It would ultimately decide the time over which the surface can usefully provide pressure drop reductions. ©2009 American Institute of Physics

An assessment of the genetic relationship between sweet and grain sorghums, within Sorghum bicolor ssp. bicolor (L.) Moench, using AFLP markers

Compared to grain sorghums, sweet sorghums typically have lower grain yield and thick, tall stalks which accumulate high levels of sugar (sucrose, fructose and glucose). Unlike commercial grain sorghum (S. bicolor ssp. bicolor) cultivars, which are usually F1 hybrids, commercial sweet sorghums were selected as wild accessions or have undergone limited plant breeding. Although all sweet sorghums are classified within S. bicolor ssp. bicolor, their genetic relationship with grain sorghums is yet to be investigated. Ninety-five genotypes, including 31 sweet sorghums and 64 grain sorghums, representing all five races within the subspecies bicolor, were screened with 277 polymorphic amplified fragment length polymorphism (AFLP) markers. Cluster analysis separated older sweet sorghum accessions (collected in mid 1800s) from those developed and released during the early to mid 1900s. These groups were emphasised in a principle component analysis of the results such that sweet sorghum lines were largely distinguished from the others, particularly by a group of markers located on sorghum chromosomes SBI-08 and SBI-10. Other studies have shown that QTL and ESTs for sugar-related traits, as well as for height and anthesis, map to SBI-10. Although the clusters obtained did not group clearly on the basis of racial classification, the sweet sorghum lines often cluster with grain sorghums of similar racial origin thus suggesting that sweet sorghum is of polyphyletic origin within S. bicolor ssp. bicolor.

Development of innovative robust stability enhancement algorithms for distribution systems containing distributed generators

This project was a step forward in improving the voltage profile of traditional low voltage distribution networks with high photovoltaic generation or high peak demand. As a practical and economical solution, the developed methods use a Dynamic Voltage Restorer or DVR, which is a series voltage compensator, for continuous and communication-less power quality enhancement. The placement of DVR in the network is optimised in order to minimise its power rating and cost. In addition, new approaches were developed for grid synchronisation and control of DVR which are integrated with the voltage quality improvement algorithm for stable operation.

Eastern twists on Western concepts: Equality jurisprudence and sexual harassment in Japan

A rich source of Japanese jurisprudence on sexual equality underlies Japan's emerging law against sexual harassment. With no law specifically outlawing sexual harassment, academics and the courts have invoked the principle of sexual equality to support their conclusion that Japanese law carries an implicit prohibition against acts of sexual harassment. In developing a legal case against sexual harassment, Japanese courts and academic commentators have introduced novel constructions of equality. The key innovations include relational equality, inherent equality and quantifiable equality. In presenting some of these Japanese contributions to equality jurisprudence, the hope is that feminist discourse on equality can take place in a broader context-a context that does not ignore the Eastern cultural experience.

Flux balance analysis of biological systems: applications and challenges

Systems level modelling and simulations of biological processes are proving to be invaluable in obtaining a quantitative and dynamic perspective of various aspects of cellular function. In particular, constraint-based analyses of metabolic networks have gained considerable popularity for simulating cellular metabolism, of which flux balance analysis (FBA), is most widely used. Unlike mechanistic simulations that depend on accurate kinetic data, which are scarcely available, FBA is based on the principle of conservation of mass in a network, which utilizes the stoichiometric matrix and a biologically relevant objective function to identify optimal reaction flux distributions. FBA has been used to analyse genome-scale reconstructions of several organisms; it has also been used to analyse the effect of perturbations, such as gene deletions or drug inhibitions in silico. This article reviews the usefulness of FBA as a tool for gaining biological insights, advances in methodology enabling integration of regulatory information and thermodynamic constraints, and finally addresses the challenges that lie ahead. Various use scenarios and biological insights obtained from FBA, and applications in fields such metabolic engineering and drug target identification, are also discussed. Genome-scale constraint-based models have an immense potential for building and testing hypotheses, as well as to guide experimentation.

A New PWM Control Method for Three-Phase Autosequentially Commutated Current Source Inverters

A new current pulsewidth modulation (PWM) method is presented which uses the principle of creating zero three-phase currents at selected instants of time, through which the load current harmonic content can be controlled along with the magnitude of its fundamental content. This gives rise to reduction of motor torque ripples through the selection of suitable PWM patterns and a fast current control in the inverter by varying the pulsewidths of the PWM pattern. Under this new PWM mode of operation, the autosequentially commutated inverter (ASCI) circuit can be modified easily so that a higher number of pulses can be accomodated within a half-cycle, compared to the normal ASCI circuit. The experimental oscillograms verify the effectiveness of the new PWM method.

Stress Concentration in Post-Tensioned Prestressed Concrete Beams

The use of the multiple Fourier method to analyses the stress distribution in the and regions of as a post-tensioned prestressed concrete beam had shown. The multiple Fourier method demonstrated have is a relatively new method for solving those problems for which the “Saint Vansant principle” is not applicable, The actual three-dimensional problem and a two-dimensional simplified representation of it are treated. The two-dimensional case is treated first and rather completely to gain further experience with multiple Fourier procedure, the appropriate Galerkin Vector for the three-dimensional case is found and the required relations between the arbitrary functions are stated.

An analysis of risk management disclosures: Australian evidence

- Purpose Communication of risk management practices are a critical component of good corporate governance. Research to date has been of little benefit in informing regulators internationally. This paper seeks to contribute to the literature by investigating how listed Australian companies in a setting where disclosures are explicitly required by the ASX corporate governance framework, disclose risk management (RM) information in the corporate governance statements within annual reports. - Design/methodology/approach To address our study’s research questions and related hypotheses, we examine the top 300 ASX-listed companies by market capitalisation at 30 June 2010. For these firms, we identify, code and categorise RM disclosures made in the annual reports according to the disclosure categories specified in Australian Stock Exchange Corporate Governance Principles and Recommendations (ASX CGPR). The derived data is then examined using a comprehensive approach comprising thematic content analysis and regression analysis. - Findings The results indicate widespread divergence in disclosure practices and low conformance with the Principle 7 of the ASX CGPR. This result suggests that companies are not disclosing all ‘material business risks’ possibly due to ignorance at the board level, or due to the intentional withholding of sensitive information from financial statement users. The findings also show mixed results across the factors expected to influence disclosure behaviour. Notably, the presence of a risk committee (RC) (in particular, a standalone RC) and technology committee (TC) are found to be associated with improved levels of disclosure. we do not find evidence that company risk measures (as proxied by equity beta and the market-to-book ratio) are significantly associated with greater levels of RM disclosure. Also, contrary to common findings in the disclosure literature, factors such as board independence and expertise, audit committee independence, and the usage of a Big-4 auditor do not seem to impact the level of RM disclosure in the Australian context. - Research limitation/implications The study is limited by the sample and study period selection as the RM disclosures of only the largest (top 300) ASX firms are examined for the fiscal year 2010. Thus, the finding may not be generalisable to smaller firms, or earlier/later years. Also, the findings may have limited applicability in other jurisdictions with different regulatory environments. - Practical implications The study’s findings suggest that insufficient attention has been applied to RM disclosures by listed companies in Australia. These results suggest that the RM disclosures practices observed in the Australian setting may not be meeting the objectives of regulators and the needs of stakeholders. - Originality/value Despite the importance of risk management communication, it is unclear whether disclosures in annual financial reports achieve this communication. The Australian setting provides an ideal environment to examine the nature and extent of risk management communication as the Australian Securities Exchange (ASX) has recommended risk management disclosures follow Principle 7 of its principle-based governance rules since 2007.

Mechanical performances of track-shaped rebar stiffened concrete-filled steel tubular (SCFRT) stub columns under axial compression

This paper presents a combined experimental, numerical, and theoretical study on the mechanical behaviors of track-shaped concrete-filled steel tubular (SCFRT) stub columns stiffened by rebars under compressive load. A total of 18 track-shaped concrete-filled steel tubular specimens including 12 specimens stiffened by rebars and 6 non-stiffened counterparts are tested, with consideration of parameters including flakiness ratio, concrete strength, and stiffeners. Failure pattern, bearing capacity, and ductility are all analyzed and discussed based on the experimental results. The numerical simulation by finite element (FE) software ABAQUS is also conducted. Based on both experimental and numerical results, theoretical formula to predict the load-bearing capacity of SCFRT stub columns subjected to axial compression loading is established according to the superposition principle of ultimate load-bearing capacity with rational simplification. The proposed theoretical method provides accurate predictions on the load bearing capacity by comparing with experimental results from 18 groups of specimens.

A computational algorithm for the verification of tautologies in propositional calculus

A computational algorithm (based on Smullyan's analytic tableau method) that varifies whether a given well-formed formula in propositional calculus is a tautology or not has been implemented on a DEC system 10. The stepwise refinement approch of program development used for this implementation forms the subject matter of this paper. The top-down design has resulted in a modular and reliable program package. This computational algoritlhm compares favourably with the algorithm based on the well-known resolution principle used in theorem provers.

Kilpailukykyvaltion koululainsäädännön rakentuminen : Suomen eduskunta ja 1990-luvun koulutuspoliittinen käänne

Finnish education policy, educational legislation and the entire education system changed significantly during the 1990s as part of a general restructuring of public administration. There has been a clear divergence from the former tradition of a system of regulation, founded on detailed legislation and the principle of equality. The new governance, which is based more on individual choice, efficiency and evaluation, emphasizes that the development of a high standard of education is a necessity in the light of global competition. This study explores the legislative process regarding education policy in the Finnish Parliament during the 1990s, and highlights in particular how the international discourse on education policies was restructured in the context of Finnish legislation. The research material consists of all the public parliamentary documents relating to education, including government proposals, minutes from the discussions in the chamber and archive material (final protocols, reports and statements) for the Committee for Education and Culture. The discourse on the process of drafting and passing education legislation is modelled on three interrelated policy technologies (market, management and performance), which are understood here as mechanisms connecting general political ideas to normative legislation. The changes in the regulation of education were part of a general public administration reform instigated during the mid 1980s. The research results will prove that during the left-right coalition cabinet of PM Harri Holkeri, new policy technologies affected the parliamentary discourse on education policy. This was particularly influenced by a change in the preconditions for the management of education that was created as a result of the numerous demands to deregulate and delegate decision-making authority to the local and school levels while rendering the whole education system more effective. At the turn of the decade, market-type mechanisms were more indirectly manifested in the forms of individuality and freedom of choice, which were reflected, for example, in proposals to “lower the hurdles” by separating general from vocational secondary education with a view to encouraging students to select courses from other educational establishments, in addition to relaxing the requirements for establishing private schools and abolishing a hundred-year-old strict national catchment-area system. Later, in the course of the 1990s, after the subjects, players, and methods of evaluation had been more precisely defined, evaluation based on performance would result in the active measurement of the attainment of set objectives. In the spring of 1991, from the outset of PM Esko Aho's right-centre coalition cabinet, the education budget suffered cutbacks as a result of a global recession and this influenced the legislative work of, and discourses in, parliament. Representatives of the parties in power regarded the recession solely as an external factor that was remote from the political arena. In their view, the education system should rise to the challenge by ensuring the efficient and innovative use of the resources available and by developing new forms of indicators for evaluating results. Representatives of the opposition opposed the cabinet’s standpoint as a result of the recession, criticized the measures taken by pointing out the harmful effect of constantly cutting the budget and argued that the government had made political capital out of the recession by using it as an opportunity to give more room to market, management and performance technologies within the Finnish education system. Criticism of the new education policy became even stronger during PM Paavo Lipponen's first “rainbow” coalition cabinet with critical views being expressed not only from the opposition but also from representatives within the government. Representatives from the left demanded legislative restrictions and the instigation of measures to relieve the presumed negative effects of market, management and performance in the name of educational equality. The new management by results steering method within the university sector and the introduction of commercial education services in compulsory education were fiercely criticized. The argument over “setting outer limits” including, for example, the demands for more detailed legislation and earmarked state subsidies was characteristic of Parliament’s legislative discourse in the latter part of the 1990s. Keywords: education policy, education legislation, Parliament of Finland

On the construction of costs: McDermott v Robinson Helicopter Company (No.2) [2014] QSC 213

The decision in McDermott v Robinson Helicopter Company (No 2) [2014] QSC 213 involves an extensive examination of authorities on the general principle relating to the awarding of costs to a successful party. The court concluded that there was a predilection in favour of distributing costs according to the outcome or 'event' of particular issues in the action.

Copyright, fair use and the Australian Constitution

There has been much debate over recent years about whether Australian copyright law should adopt a fair use doctrine. In this chapter we argue by pointing to the historical record that the incorporation of the term 'copyrights' in the Australian Constitution embeds a notion of balance and fair use in Australian law and that this should be taken into account when interpreting the Australian Copyright Act 1968. English case law in the 18th and 19th centuries developed a principle that copyright infringement did not occur where a person had made a fair use of a work. Fair use was generally established where the defendant had made a productive use that did more than alter the original work for the purpose of evading liability, and where the defendant had made an original contribution to the resulting work. Additionally, fairness was shown by a use that did not supersede or prejudice the market for the original work. At the time of including the copyright power in the Constitution, the UK Parliament’s understanding of “copyrights” included the notion of fair use as it had been developed in U.K. precedent. In this chapter we argue that the work “copyrights” in the Australia Constitution takes its definition from copyright in 1900 and as it has evolved since. Importantly, the word “copyrights” is infused with a particular meaning that incorporates the principle of copyright balance. The constitutional notion of copyright, therefore, is not that of an unlimited power to prevent all copying. Rather, copyright distinguishes between infringing copying and non-infringing copying and grants to the copyright owner only the power to control the former. Non-infringing copying includes well-accepted limitations on the copyright owner’s rights, including the copying of ideas, the copying of public domain works and the copying of insubstantial parts of copyrighted works. In this chapter we argue that non-infringing copying also includes copying to make a fair use of a work. The sections that distinguish infringing copying from non-infringing copying in the Copyright Act 1968 are sections 36(1) and 101(1), which define infringement as the doing, without licence, of an “act comprised in the copyright”. An infringing copy is an act comprised the copyright, whereas a non-infringing copy is not. We argue that space for fair uses of copyrighted works is built into the Copyright Act 1968 through these sections, because a fair use will not produce an infringing copy and so is not an act comprised in the copyright.

We'll Close! Plant Closings, Plant-Closing Threats, Union Organizing and NAFTA

This article is based on Final Report: The Effects of Plant Closing or Threat of Plant Closing on the Right of Workers to Organize. The report was commissioned by the tri-national Labor Secretariat of the Commission for Labor Cooperation (the NAFTA labor commission) "on the effects of the sudden closing of the plant on the principle of freedom of association and the right of workers to organize in the three countries."