Influence of convergence angle of tooth preparation on the fracture resistance of Y-TZP-based all-ceramic restorations

Objective: To investigate the influence of the convergence angle of tooth preparation on the fracture load of Y-TZP-based ceramic (YZ-Vita YZ) substructure (SB) veneered with a feldspathic porcelain (VM9-Vita VM9). Methods: Finite element stress analysis (FEA) was performed to examine the stress distribution of the system. Eighty YZ SB were fabricated using a CAD-CAM system and divided into four groups (n = 20), according to the total occlusal convergence (TOC) angle: G6-6° TOC; G12-12° TOC; G20-20° TOC; and G20MOD-20° TOC with modified SB. All SB were veneered with VM9, cemented in a fiber reinforced epoxy resin die, and loaded to failure. Half of the specimens from each group (n = 10) were cyclic fatigued (106 cycles) before testing. Failure analysis was performed to determine the fracture origin. Data were statistically analyzed using Anova and Tukey's tests (α = 0.05). Results: The greatest mean load to fracture value was found for the G20MOD, which was predicted by the FEA. Cyclic fatigue did not significantly affect the load of fracture. Catastrophic failure originating from the internal occlusal surface of the SB was the predominant failure mode, except for G20MOD. Significance: The YZ-VM9 restorations resisted greater compression load than the usual physiological occlusal load, regardless of the TOC angle of preparations. Yet, the G20MOD design produced the best performance among the experimental conditions evaluated. © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

The effect of locked screw angulation on the biomechanical properties of the S.P.S. Free-Block plate

Objectives: Among the locked internal fixators is one denominated S.P.S. (Synthesis Pengo System) Free-Block, which was designed with a locking ring that allows the screw to be locked and positioned obliquely. Due to the paucity of biomechanical studies on this system, the present work aimed to evaluate the influence of locked screw angulation on the resistance of the S.P.S. Free--Block plate. Methods: Forty synthetic bone cylinders with 10 mm fracture gap were used. Forty seven-hole 3.5 mm stainless steel plates (two AO-like dynamic compression holes and five locked holes) were assembled according to the orientation of the locked screws: mono cortical screws were positioned at 90° to the long axis of the cylinder (Group 1), and monocortical screws were positioned at 70° to its cylinder long axis (Group 2). In both groups, AO-like dynamic compression hole screws were positioned bicortically and neutrally. For each group, six specimens were tested until failure, three in bending and three in compression, to determine the loads for fatigue testing. Subsequently, for each group, 14 specimens were tested for failure --seven by bending and seven in compression. Results: No significant failure differences were observed between Groups 1 and 2 under static-loading or fatigue test. Clinical significance: In a fracture gap model the orientation of the locked monocortical screws did not show any influence on the mechanical performance of the S.P.S. Free-Block to tests of axial compression and four-point bending. © Schattauer 2013.

Quantitative variations in heterotrophic plate count and in the presence of indicator microorganisms in bottled mineral water

Quantitative variations in heterotrophic plate count (HPC) and in the presence of indicator microorganisms in 0.5, 1.5 and 20-L bottles of different brands of Brazilian mineral water were analyzed during their shelf life. No variations were identified in the presence of indicator microorganisms, but quantitative variations in HPC were observed in some brands, which suggests that changes may be occurring in the water quality during storage. The aim of this study was also to evaluate the quality of the bottled mineral waters and the presence of enterococci and Pseudomonas aeruginosa were verified in six and two bottles, respectively, which is in disagreement with the microbiological quality criteria established in the current legislation. Although no limit is set for HPC in mineral water, this study relies on the limit of 500 colony-forming units per mL of sample (CFU/mL). Seventy-two bottles presented levels above 500 CFU/mL and up to 560,000 CFU/mL. This study showed that the control of HPC (<500 CFU/mL) for non-returnable packaging seems to be adequate to ensure the quality of mineral water during storage. The high values of HPC and its variations detected during storage seem to fully justify the need for a reevaluation of the use of HPC in bottled mineral water quality management. More detailed studies on the potential health risk of HPC and its variations in mineral water are also needed. © 2012 Elsevier Ltd.

Resolución 423(XIX): Integración física de América Latina mediante la interconexión hidrográfica del Orinoco, el Amazonas y el Plata y la carretera boliviariana marginal de la selva = Résolution 423(XIX): Physical integration of Latin America through the hydrographic interconnexion of the Orinoco, Amazonean River Plate and the trans-jungle border highway of the Bolivarian Nations = Resolution 423(XIX): Intégration physique de l'Amérique latine moyennant l'interconnexion hidrographique des bassins de l'Orénoque, l'Amazone et le Plata, et la construction de la route bolivarienne en bordure de la forêt vierge

Publicado separadamete en cada idioma

Specialized Seed Dispersal in Epiphytic Cacti and Convergence with Mistletoes

Mistletoes represent the best example of specialization in seed dispersal, with a reduced assemblage of dispersal agents. Specific dispersal requirements mediated by the specificity of seed deposition site have apparently led to the evolution of such close relationships between mistletoes and certain frugivores. Here, we provide evidences for another case of specialization involving epiphytic cacti in the genus Rhipsalis, and small Neotropical passerines Euphonia spp., which also act as the main seed dispersers of mistletoes in the family Viscaceae. With field observations, literature search, and observations on captive birds, we demonstrated that Rhipsalis have specific establishment requirements, and euphonias are the most effective dispersers of Rhipsalis seeds in both quantitative and qualitative aspects, potentially depositing seeds onto branches of host plants. We interpret the similar dispersal systems of Rhipsalis and Viscaceae mistletoes, which involve the same dispersal agents, similar fruit morphologies, and fruit chemistry as convergent adaptive strategies that enable seeds of both groups to reach adequate microsites for establishment in host branches. © 2013 by The Association for Tropical Biology and Conservation.

Reduction of infinite dimensional systems to finite dimensions: Compact convergence approach

We consider parameter dependent semilinear evolution problems for which, at the limit value of the parameter, the problem is finite dimensional. We introduce an abstract functional analytic framework that applies to many problems in the existing literature for which the study of asymptotic dynamics can be reduced to finite dimensions via the invariant manifolds technique. Some practical models are considered to show wide applicability of the theory. © 2013 Society for Industrial and Applied Mathematics.

Lamb mode diversity imaging for non-destructive testing of plate-like structures

Several Lamb wave modes can be coupled to a particular structure, depending on its geometry and transducer used to generate the guided waves. Each Lamb mode interacts in a particular form with different types of defects, like notches, delamination, surface defects, resulting in different information which can be used to improve damage detection and characterization. An image compounding technique that uses the information obtained from different propagation modes of Lamb waves for non-destructive testing of plate-like structures is proposed. A linear array consisting of 16 piezoelectric elements is attached to a 1 mm thickness aluminum plate, coupling the fundamental A0 and S0 modes at the frequencies of 100 kHz and 360 kHz, respectively. For each mode two images are obtained from amplitude and phase information: one image using the Total Focusing Method (TFM) and one phase image obtained from the Sign Coherence Factor (SCF). Each TFM image is multiplied by the SCF image of the respective mode to improve contrast and reduce side and grating lobes effects. The high dispersive characteristic of the A0 mode is compensated for adequate defect detection. The information in the SCF images is used to select one of the TFM mode images, at each pixel, to obtain the compounded image. As a result, dead zone is reduced, resolution and contrast are improved, enhancing damage detection when compared to the use of only one mode. © 2013 Elsevier Ltd.

Classificação da curvatura de vertentes em perfil via Thin Plate Spline e Inferência Fuzzy

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Convergence and Asymmetry in Sanitary and Phytosanitary Measures in the Region's Trade Agreements

Sanitary and phytosanitary matters have acquired greater significance in the region's trade, as reflected in the significant number of complaints brought before the various dispute settlement mechanisms pertaining to the regional integration schemes. This may be attributed to the importance of the Latin American countries in world agricultural trade and to different phytosanitary and zoosanitary standards required by each. Given the multiplication of bilateral and plurilateral agreements in Latin America and the Caribbean, convergence on the sanitary standards required under such accords is crucial for the trade integration of a region that is an agro-exporter par excellence. Convergence is essential to facilitate market access and expedite trade flows. This bulletin assesses convergence of standards in the bilateral and plurilateral trade agreements signed by the countries of the region, the treatment afforded to the principles contained in the World Trade Organization (WTO) Agreement on the Application of Sanitary and Phytosanitary Measures (SPS Agreement) and the progress the region has made relative to that Agreement.

Competition Policy and Trade Agreements in the Region: Exploring Forums for Cooperation and Convergence

The similarities of competition provisions in integration and other intraregional agreements and the dissemination of this information could serve as a basis for progress in cooperation and convergence on this issue in the region. The negotiation processes that have taken place for these agreements have also enhanced communication between the national agencies concerned, leading to processes of learning and harmonization; these processes could be strengthened as part of the current efforts of administrating and implementing trade agreements. This edition of the FAL Bulletin reviews the information available in order to see how progress can be made on this issue on the basis of the analysis and bibliography of Álvarez and others (2006), and Silva and Álvarez (2006).

Convergence and divergence of transport and mobility policies in Latin America: Lack of urban co-modality

This issue of the FAL bulletin analyses transport and mobility policy in Latin America, where the lack of integrated public policies for urban mobility and the failure to take coordinated action over time make it difficult to prioritize investments and coordinate existing initiatives (both public and private).

A new frontier for Caribbean convergence: integration without borders

Today, forty years since its birth, the Caribbean integration has reached its limit.1 2 Consequently, there is urgent need to respond to the current realities and emerging global trends — which require greater engagement from the public, students, academics and policymakers — in moving the Caribbean Community towards a new trajectory of Caribbean convergence. The immediate concern is to devise ways of improving the convergence process among Latin American and Caribbean countries. This convergence process will have to be sensitive to both current and emerging global dynamics. This paper presents the roadmap of a new trajectory towards Caribbean convergence, sensitive to both current and emergent regional and global trends. It begins in Section I by identifying the emerging international political and economic trends that provide a backdrop against which the discussion on Caribbean convergence is squarely placed. Section II discusses the need for a new strategy of convergence, and provides the conceptual framework of Caribbean convergence. Section III spells out the pillars, strategies and delivery mechanisms of Caribbean convergence, and highlights the role of Trinidad and Tobago in this process. The paper concludes by pointing out the urgent need for a regional synergy of economic logic and political logic.