Fifty years in the blink of an eye: a retrospective study of ocular and periocular lesions in domestic animals

A survey was undertaken aiming to obtain an overview of ocular and periocular lesions diagnosed in domestic mammals over a period of 50 years in a veterinary pathology diagnostic laboratory in the Central Region of the State of Rio Grande do Sul, Brazil. In this lab, 33,075 histophatological exams had been performed over the period surveyed, of which 540 (1.6%) concerned ocular and periocular lesions. For various reasons ninety specimens were excluded from the study and the remaining 450 consisted of samples from dogs (53.5%), cattle (28.2%), cats (11.1%), horses (5.1%) sheep (1.3%), rabbits (0.4%), and pig (0.2%). The eyelids were the most prevalent (248/450) site of lesions in each of the species studied, followed by third eyelid (73/450), and conjunctiva (27/450). In dogs (241 samples) lesions in sebaceous glands (including Meibomian glands) were the most common findings (75/241), followed by melanocytic tumors (52/241) and nonspecific conjunctivitis (13/241). Squamous cell neoplasms, both benign and malignant, were relatively common. In cattle, anatomical sites affected by ocular and periocular lesions, in decreasing order of frequency, were eyelid, cornea and third eyelid. Squamous cell carcinoma (SCC) alone accounted for 80.3% of all diagnoses, while all neoplastic lesions made up for 85.0% of the lesions diagnosed in cattle. Neoplasia accounted for most of the lesions diagnosed in cats (39/50 cases); all of these were malignant, and SCC, hemangiosarcoma and fibrosarcoma were the most common types diagnosed. In horses, 19 out of 23 submissions were neoplasms and most were sarcoid (8/23) and SCC (8/23). There were six submissions from sheep with unpigmented skin, all of which represented SCC of the eyelids (5) and third eyelid (1).

Design and testing of an armature-reaction-compensated permanent magnet synchronous generator for island operation

At present, permanent magnet synchronous generators (PMSGs) are of great interest. Since they do not have electrical excitation losses, the highly efficient, lightweight and compact PMSGs equipped with damper windings work perfectly when connected to a network. However, in island operation, the generator (or parallel generators) alone is responsible for the building up of the network and maintaining its voltage and reactive power level. Thus, in island operation, a PMSG faces very tight constraints, which are difficult to meet, because the flux produced by the permanent magnets (PMs) is constant and the voltage of the generator cannot be controlled. Traditional electrically excited synchronous generators (EESGs) can easily meet these constraints, because the field winding current is controllable. The main drawback of the conventional EESG is the relatively high excitation loss. This doctoral thesis presents a study of an alternative solution termed as a hybrid excitation synchronous generator (HESG). HESGs are a special class of electrical machines, where the total rotor current linkage is produced by the simultaneous action of two different excitation sources: the electrical and permanent magnet (PM) excitation. An overview of the existing HESGs is given. Several HESGs are introduced and compared with the conventional EESG from technical and economic points of view. In the study, the armature-reaction-compensated permanent magnet synchronous generator with alternated current linkages (ARC-PMSG with ACL) showed a better performance than the other options. Therefore, this machine type is studied in more detail. An electromagnetic design and a thermal analysis are presented. To verify the operation principle and the electromagnetic design, a down-sized prototype of 69 kVA apparent power was built. The experimental results are demonstrated and compared with the predicted ones. A prerequisite for an ARC-PMSG with ACL is an even number of pole pairs (p = 2, 4, 6, …) in the machine. Naturally, the HESG technology is not limited to even-pole-pair machines. However, the analysis of machines with p = 3, 5, 7, … becomes more complicated, especially if analytical tools are used, and is outside the scope of this thesis. The contribution of this study is to propose a solution where an ARC-PMSG replaces an EESG in electrical power generation while meeting all the requirements set for generators given for instance by ship classification societies, particularly as regards island operation. The maximum power level when applying the technology studied here is mainly limited by the economy of the machine. The larger the machine is, the smaller is the efficiency benefit. However, it seems that machines up to ten megawatts of power could benefit from the technology. However, in low-power applications, for instance in the 500 kW range, the efficiency increase can be significant.

Commercialization of Modern Renewable Energy

The threat of global warming and its consequences are widely recognized, and the question of how to proceed with the long transition towards fossil fuel -neutral economies concerns many nations and people. At the same time the world’s primary energy use is predicted to increase significantly during the next decades as a result of global population and welfare increase. Improved energy efficiency and increased use of renewable energy sources in the world’s energy mix play important roles in the future energy production and consumption. The objective of this thesis is to study how novel renewable energy technologies, such as distributed small-scale bio-fueled combined heat and power production and wind power technologies could be commercialized efficiently. A wide array of attributes may contribute to the diffusion of new products. In general, the bioenergy and wind power technologies are in emerging phases, and the diffusion stage varies from country to country. The effects of firms’ technology choices, collaboration and alliances are studied in this thesis. Furthermore, the roles of national energy infrastructure and energy support schemes in the commercialization of new renewable energy products are explored. The empirical data is based on energy expert interviews, financial and patent data, and literature reviews of different case studies. The thesis comprises two parts. The first part provides an overview of the study, and the second part includes six research publications. The results reveal that small-scale bio-fueled combined heat and power production and wind power technologies are still in emerging phases in their life cycles, and energy support schemes are crucial in the market diffusion. The study contributes to earlier findings in the literature and industry by confirming that adequate energy policies and energy infrastructure are fundamental in the commercialization of novel renewable energy technologies. Firm-specific issues, including business relationships and new business models, and market-related issues will have a more significant role in the market penetration in the future, when the technologies mature and become competitive without political support schemes.

Design and implementation of a production synchronization extension for Microsoft Dynamics AX

In a just-in-time, assemble-to-order production environments the scheduling of material requirements and production tasks - even though difficult - is of paramount importance. Different enterprise resource planning solutions with master scheduling functionality have been created to ease this problem and work as expected unless there is a problem in the material flow. This case-based candidate’s thesis introduces a tool for Microsoft Dynamics AX multisite environment, that can be used by site managers and production coordinators to get an overview of the current open sales order base and prioritize production in the event of material shortouts to avoid part-deliveries.

Violations of children's rights in armed conflicts : international treaties, observations by peacekeepers and crisis management training in Finland

Ninety-nine Finnish peacekeepers, who had been serving in 15 different operations around the world, participated in the study (8 women, 27-52 years old, m = 37.4, SD = 8.9; and 91 men, 21-69 years old, m = 41.4, SD = 10.2). Three military crisis management trainers from the Finnish Defence Forces International Centre also participated in the study. The data was collected with two webbased questionnaires. In addition two interviews were made with specialists of civilian crisis management in Finland. The study also provides an overview of international treaties concerning children’s rights in armed conflict. The results show that 48.7 % of dangers for children in conflicts reported by the peacekeepers were related to physical injury (e.g. landmines and traffic), and 27.4 % were related to social problems (e.g. poverty, child soldiers, and trafficking). 24.1 % of the peacekeepers had made observations of children’s rights violations either often or very often during peacekeeping operations. 49.6 % of the observations were related to social problems (e.g. child labour or being forced to beg), and 33.0 % were related to physical injury (e.g. assault). Frequency of observation of children’s rights violations was not associated with either sex or military degree of the peacekeepers; instead it was significantly correlated with the peacekeepers’ degree of knowledge of EU’s child protection guidelines. On the basis of the results, it is recommended that knowledge about children’s rights and protection should be included in the training of Finnish crisis management personnel to a much higher degree than at the present.

Comparison of sustainability of technologies for water desalination

The aim of this work is to perform an in-depth overview on the sustainability of several major commercialized technologies for water desalination and to identify the challenges and propose suggestions for the development of water desalination technologies. The overview of those technologies mainly focuses on the sustainability from the viewpoint of total capital investment, total product cost, energy consumption and global warming index. Additionally, a systematic sustainability assessment methodology has been introduced to validate the assessment process. Conclusions are:1) Reverse osmosis desalination (RO) plants are better than multi-stage flash distillation (MSF) desalination plants and multiple-effect distillation (MED) desalination plants from the viewpoint of energy consumption, global warming index and total production cost; 2)Though energy intensive, MSF plants and MED plants secure their advantages over RO plants by lower total capital investment, wider applicability and purer water desalted and they are still likely to flourish in energy-rich area;3) Water production stage and wastewater disposal stage are the two stages during which most pollutant gases are emitted. The water production stage alone contributes approximately 80~90% of the total pollutant gases emission during its life cycle; 4)The total capital cost per m3 desalted water decreases remarkably with the increasing of plant capacity. The differences between the capital cost per m3 desalted water of RO and other desalination plants will decrease as the capacity increases; 5) It is found that utilities costs serve as the major part of the total product cost, and they account for 91.16%, 85.55% and 71.26% of the total product cost for MSF, MED and RO plants, respectively; 6) The absolute superiority of given technology depends on the actual social-economic situation (energy prices, social policies, technology advancements).

Fedora Commons as core repository of the EU legislation

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

A Survey about Integration of Journal Systems with Repositories in Brazil

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Enlighten: A suite of metrics and altmetrics

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

‘Just how (re)usable is Research Data? A legal perspective’ - A poster summarizing the recommendations of the OpenAIRE legal and licensing study.

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Supporting the creation, management, and long-term preservation of social science research data

Poster at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

A rose is a rose is a rose? Defining significant properties of social science research data

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Liposomes: from biophysics to the design of peptide vaccines

Liposomes (lipid-based vesicles) have been widely studied as drug delivery systems due to their relative safety, their structural versatility concerning size, composition and bilayer fluidity, and their ability to incorporate almost any molecule regardless of its structure. Liposomes are successful in inducing potent in vivo immunity to incorporated antigens and are now being employed in numerous immunization procedures. This is a brief overview of the structural, biophysical and pharmacological properties of liposomes and of the current strategies in the design of liposomes as vaccine delivery systems.

A systematic mapping study of web services discovery mechanisms

Context: Web services have been gaining popularity due to the success of service oriented architecture and cloud computing. Web services offer tremendous opportunity for service developers to publish their services and applications over the boundaries of the organization or company. However, to fully exploit these opportunities it is necessary to find efficient discovery mechanism thus, Web services discovering mechanism has attracted a considerable attention in Semantic Web research, however, there have been no literature surveys that systematically map the present research result thus overall impact of these research efforts and level of maturity of their results are still unclear. This thesis aims at providing an overview of the current state of research into Web services discovering mechanism using systematic mapping. The work is based on the papers published 2004 to 2013, and attempts to elaborate various aspects of the analyzed literature including classifying them in terms of the architecture, frameworks and methods used for web services discovery mechanism. Objective: The objective if this work is to summarize the current knowledge that is available as regards to Web service discovery mechanisms as well as to systematically identify and analyze the current published research works in order to identify different approaches presented. Method: A systematic mapping study has been employed to assess the various Web Services discovery approaches presented in the literature. Systematic mapping studies are useful for categorizing and summarizing the level of maturity research area. Results: The result indicates that there are numerous approaches that are consistently being researched and published in this field. In terms of where these researches are published, conferences are major contributing publishing arena as 48% of the selected papers were conference published papers illustrating the level of maturity of the research topic. Additionally selected 52 papers are categorized into two broad segments namely functional and non-functional based approaches taking into consideration architectural aspects and information retrieval approaches, semantic matching, syntactic matching, behavior based matching as well as QOS and other constraints.

A multimethod examination of contributors to successful on-the-job learning for vocational students

Rapid changes in working life and competence requirements of different professions have increased interest in workplace learning. It is considered an effective way to learn and update professional skills by performing daily tasks in an authentic environment. Especially, ensuring a supply of skilled future workers is a crucial issue for firms facing tight competition and a shortage of competent employees due to the retirement of current professionals. In order to develop and make the most of workplace learning, it is important to focus on workplace learning environments and the individual characteristics of those participating in workplace learning. The literature has suggested various factors that influence adults' and professionals’ workplace learning of profession-related skills, but lacks empirical studies on contextual and individual-related factors that positively affect students' workplace learning. Workers with vocational education form a large group in modern firms. Therefore, elements of vocational students’ successful workplace learning during their studies, before starting their career paths, need to be examined. To fill this gap in the literature, this dissertation examines contributors to vocational students’ workplace learning in Finland, where students’ workplace learning is included in the vocational education and training system. The study is divided into two parts: the introduction, comprised of the overview of the relevant literature and the conclusion of the entire study, and five separate articles. Three of the articles utilize quantitative methods and two use qualitative methods to examine factors that contribute to vocational students’ workplace learning. The results show that, from the students’ perspective, attitudinal, motivational, and organizationrelated factors enhance the student’s development of professionalism during the on-the-job learning period. Specifically, the organization-related factors such as innovative climate, guidance, and interactions with seniors have a strong positive impact on the students’ perceived development of professional skills because, for example, the seniors’ guidance and provision of new viewpoints for the tasks helps the vocational students to gain autonomy at work performance. A multilevel analysis shows that of those factors enhancing workplace learning from the student perspective, innovative climate, knowledge transfer accuracy, and the students’ performance orientation were significantly related to the workplace instructors’ assessment regarding the students’ professional performance. Furthermore, support from senior colleagues and the students’ self-efficacy were both significantly associated with the formal grades measuring how well the students managed to learn necessary professional skills. In addition, the results suggest that the students’ on-the-job learning can be divided into three main phases, of which two require efforts from both the student and the on-the-job learning organization. The first phase includes the student’s application of basic professional skills, demonstration of potential in performing daily tasks, and orientation provided by the organization at the beginning of the on-the-job learning period. In the second phase, the student actively develops profession-related skills by performing daily tasks, thus learning a fluent working style while observing the seniors’ performance. The organization offers relevant tasks and follows the student’s development. The third level indicates a student who has reached the professional level described as a full occupation. The results suggest that constructing the vocational students’ successful on-the-job learning period requires feedback from seniors, opportunities to learn to manage entire work processes, self-efficacy on the part of the students, proactive behavior, and initiative in learning. The study contributes to research on workplace learning in three ways: firstly, it identifies the key individual- and organization-based factors that influence the vocational students’ successful on-the-job learning from their perspective and examines mutual relationships between these factors. Second, the study provides knowledge of how the factors related to the students’ view of successful workplace learning are associated with the workplace instructors’ perspective and the formal grades. Third, the present study finds elements needed to construct a successful on-the-job learning for the students.