The Arterial Switch Operation in Europe for Transposition of the Great Arteries: a Multi-Institutional Study from the European Congenital Heart Surgeons Association

OBJECTIVES: This study analyzes the results of the arterial switch operation for transposition of the great arteries in member institutions of the European Congenital Heart Surgeons Association. METHODS: The records of 613 patients who underwent primary arterial switch operations in each of 19 participating institutions in the period from January 1998 through December 2000 were reviewed retrospectively. RESULTS: A ventricular septal defect was present in 186 (30%) patients. Coronary anatomy was type A in 69% of the patients, and aortic arch pathology was present in 20% of patients with ventricular septal defect. Rashkind septostomy was performed in 75% of the patients, and 69% received prostaglandin. There were 37 hospital deaths (operative mortality, 6%), 13 (3%) for patients with an intact ventricular septum and 24 (13%) for those with a ventricular septal defect (P < .001). In 36% delayed sternal closure was performed, 8% required peritoneal dialysis, and 2% required mechanical circulatory support. Median ventilation time was 58 hours, and intensive care and hospital stay were 6 and 14 days, respectively. Although of various preoperative risk factors the presence of a ventricular septal defect, arch pathology, and coronary anomalies were univariate predictors of operative mortality, only the presence of a ventricular septal defect approached statistical significance (P = .06) on multivariable analysis. Of various operative parameters, aortic crossclamp time and delayed sternal closure were also univariate predictors; however, only the latter was an independent statistically significant predictor of death. CONCLUSIONS: Results of the procedure in European centers are compatible with those in the literature. The presence of a ventricular septal defect is the clinically most important preoperative risk factor for operative death, approaching statistical significance on multivariable analysis.

Results of Surgery for Ebstein Anomaly: a Multicenter Study from the European Congenital Heart Surgeons Association

OBJECTIVE: Since most centers' experience with Ebstein anomaly is limited, we sought to analyze the collective experience of participating institutions of the European Congenital Heart Surgeons Association with surgery for this rare malformation. METHODS: The records of all 150 patients (median age 6.4 years) who underwent surgery for Ebstein anomaly in the 13 participating Association centers between January 1992 and January 2005 were reviewed retrospectively. Patients with congenitally corrected transposition were excluded. RESULTS: Most patients (81%) had Ebstein disease type B or C and significant functional impairment (61% in New York Heart Association class III or IV) and 16% had prior operations. Surgical procedures (n = 179) included valve replacement (n = 60, 33.5%), valve repair (n = 49, 27.3%), 1(1/2) ventricle repair (n = 46, 25.6%), palliative shunt (n = 13, 7.26%), and other complex procedures (n = 11, 6.14%). There were 20 hospital deaths (operative mortality 13.3%) after valve replacement in 5 patients, valve repair in 3, 1(1/2) ventricle repair in 7, palliative procedures in 3, and miscellaneous procedures in 2. Younger age and palliative procedures were univariate risk factors for operative death, but only age was an independent predictor on multivariable analysis. CONCLUSIONS: Most patients coming to surgery presented in childhood and were significantly symptomatic. More than half underwent valve replacement or repair, but a considerable proportion had severe disease necessitating 1(1/2) ventricle repair or palliative procedures. Operative mortality did not differ significantly among repair, replacement, and 1(1/2) ventricle repair but was associated with palliative procedures for severe disease early in life, young age being the only independent predictor of operative death.

Melhoria do Processo Produtivo da Pietec Através das Ferramentas Kaizen

Esta Tese de Mestrado foi realizada na empresa Pietec Cortiças S.A.. A empresa Pietec Cortiças S.A. é a unidade industrial responsável pela produção de rolhas técnicas de cortiça do Grupo Piedade. O objetivo desta tese prende-se com a melhoria do processo produtivo de uma das suas secções, a secção da Marcação. Esta secção é responsável pela marcação da superfície da rolha, pela aplicação do tratamento de superfície e pelo embalamento das rolhas. A otimização do processo da secção de Marcação, na qualidade de última secção do processo produtivo, permitirá à empresa obter vantagens competitivas. De forma a atingir o objetivo proposto, foi realizado um levantamento exaustivo do processo produtivo e das respetivas operações. Esta análise permitiu a identificação dos possíveis pontos de desperdício, a sua avaliação e a definição de possíveis melhorias que visam o aumento de produtividade e a redução do número de produtos não conformes. Uma vez identificados os pontos críticos do processo, procedeu-se à definição das ações de melhoria a implementar de forma a melhorar o processo produtivo. As ações tomadas assentam na filosofia Lean e nos seus princípios, utilizando-se algumas das ferramentas desta filosofia para concretizar os objetivos traçados. A ferramenta de análise Plan-Do-Check-Act (PDCA) foi a ferramenta base do projeto, acompanhando na elaboração do plano de ação, na implementação das ferramentas 5S e Single Minute Exchange of Die (SMED), na verificação dos resultados e no plano de manutenção das melhorias alcançadas. Após a implementação das medidas definidas no processo de marcação da superfície das rolhas, foi mensurada uma melhoria de 23 % no tempo médio de setup da máquina de marcação. Esta melhoria global foi alcançada através de intervenções no processo de vazamento do circuito da máquina de marcação, no procedimento de armazenamento dos moldes de marcação e na alteração dos mecanismos de ajuste da máquina de marcar e de orientar. No processo de embalamento das rolhas, as medidas implementadas produziram um aumento de 1,7 % no número de rolhas produzidas e uma redução do número de rolhas não conformes de 3,6 %. Os resultados obtidos no projeto demonstram que é possível continuar a melhorar o estado atual dos processos. Constatou-se ainda que, com a adoção de ferramentas de análise e de proposta de melhoria adequadas, é possível atuar sobre os processos e obter melhorias a curto prazo, sem que para isso seja necessário efetuar grandes investimentos.

Impacto da Utilização de Dispositivos de Iluminação Pública de Baixo Consumo Energético

Um dos principais desafios do século XXI prende-se com a evolução para uma economia global sustentável e “limpa”. Com o aumento da população e da procura energética nas últimas décadas, têm-se definido e adotado vários planos de ação a nível mundial para tentar responder aos desafios propostos. Os planos de ação adotados mundialmente visam melhorar o rendimento energético dos produtos, dos edifícios e dos serviços, da produção e distribuição de energia, facilitar o financiamento e a realização de investimentos neste domínio, suscitar e reforçar um comportamento racional em matéria de consumo de energia e consolidar a ação internacional em matéria de eficiência energética. A iluminação pública acompanhou este crescimento de população e consequente aumento das cidades. No entanto surgiram outras preocupações, visto que no passado quando a energia era relativamente barata, os municípios cometeram o erro de instalar mais iluminação em vez de ajustar muitos locais que estavam sobre iluminados. No presente muitos desses municípios estão a reavaliar as suas necessidades de iluminação, devido aos custos mais elevados de energia elétrica e também ao fator ambiental. As tecnologias na área da iluminação pública também sofreram evolução significativa e este projeto visa o estudo do impacto da utilização de dispositivos de iluminação pública de baixo consumo energético numa rua do concelho de Valongo com a finalidade de observar quais as poupanças que se podem obter na fatura energética.

Orbital Exenteration for Eyelid Skin Carcinoma

Exenteration of the orbit is a disfiguring and destructive procedure; it is generally performed for orbital malignancies and often provides a significant reconstructive challenge. Our purpose was to evaluate the clinical indications for orbital exenteration in a tertiary referral center and to assess the reconstructive options employed. A retrospective nonrandomized analysis was performed, selecting all patients undergoing orbital exenteration over a 5-year period, between January 2005 and January 2010. Patient demographics, tumor characteristics, and reconstructive techniques used were evaluated. Twenty patients with a mean age of 76.5 years underwent total orbital exenteration. Basal cell carcinoma was the main operative indication (45%), followed by squamous cell carcinoma (15%). Reconstructive techniques included cover of the raw orbital cavity with a temporal muscular flap in all cases followed with split skin grafting (25%), bilaterally pedicle V-Y advancement flap (10%) and a fasciocutaneous island flap of the retroauricular region (65%). Twenty percent of patients had local complications and all were treated in a satisfactory fashion. Eyelid skin tumors remain an important cause of orbital exenteration. Temporal muscle flap is a reliable and stable reconstructive solution after orbital exenteration and additional aid is supplied with skin grafts or local flaps. This technique ensures a good aesthetic outcome and better situation for later complementary treatments and minimal associated donor site morbidity.

Upper Eyelid Reconstruction With a Horizontal V-Y Myotarsocutaneous Advancement Flap

Upper eyelid tumours, particularly basal cell carcinomas, are relatively frequent. Surgical ablation of these lesions creates defects of variable complexity. Although several options are available for lower eyelid reconstruction, fewer surgical alternatives exist for upper eyelid reconstruction. Large defects of this region are usually reconstructed with two-step procedures. In 1997, Okada et al. described a horizontal V-Y myotarsocutaneous advancement flap for reconstruction of a large upper eyelid defect in a single operative time. However, no further studies were published regarding the use of this particular flap in upper eyelid reconstruction. In addition, this flap is not described in most plastic surgery textbooks. The authors report here their experience of 16 cases of horizontal V-Y myotarsocutaneous advancement flaps used to reconstruct full-thickness defects of the upper eyelid after tumour excision. The tumour histological types were as follows: 12 basal cell carcinomas, 2 cases of squamous cell carcinomas, 1 case of sebaceous cell carcinoma and 1 of malignant melanoma. This technique allowed closure of defects of up to 60% of the eyelid width. None of the flaps suffered necrosis. The mean operative time was 30 min. No additional procedures were necessary as good functional and cosmetic results were achieved in all cases. No recurrences were noted. In this series, the horizontal V-Y myotarsocutaneous advancement flap proved to be a technically simple, reliable and expeditious option for reconstruction of full-thickness upper eyelid defects (as wide as 60% of the eyelid width) in a single operative procedure. In the future this technique may become the preferential option for such defects.

No Fate But What We Make: a Case of Full Recovery After Out-of-Hospital Cardiac Arrest

An 80 years old man suffered a cardiac arrest shortly after arrival to his local health department. Basic Life Support was started promptly and nine minutes later, on evaluation by an Advanced Life Support team, the victim was defibrillated with a 200J shock. When orotracheal intubation was attempted, masseter muscle contraction was noticed: on reevaluation, the victim had pulse and spontaneous breathing.Thirty minutes later, the patient had been transferred to an emergency department. As he complained of chest pain, the ECG showed a ST segment depression in leads V4 to V6 and laboratory tests showed cardiac troponine I slightly elevated. A coronary angiography was performed urgently: significant left main plus three vessel coronary artery disease was disclosed.Eighteen hours after the cardiac arrest, a quadruple coronary artery bypass grafting operation was undertaken. During surgery, a fresh thrombus was removed from the middle left anterior descendent artery. Post-operative course was uneventful and the patient was discharged seven days after the procedure. Twenty four months later, he remains asymptomatic.In this case, the immediate call for the Advanced Life Support team, prompt basic life support and the successful defibrillation, altogether, contributed for the full recovery. Furthermore, the swiftness in the detection and treatment of the acute reversible cause (myocardial ischemia in this case) was crucial for long-term prognosis.

Contributos legislativos para a criação de empresas cooperativas: a livre fixação do capital social

Num contexto em que as dinâmicas europeias em matéria de empreendedorismo e empresas sociais apelam à melhoria do ambiente legal, este estudo debruça-se sobre a oportunidade da consagração do princípio da livre fixação nos estatutos da cooperativa do montante do capital social. Esta solução legislativa permitirá reduzir os custos de contexto para a constituição da cooperativa e evitar o risco de fuga para formas societárias com regimes mais favoráveis em matéria de capital social mínimo. Constata-se que nas cooperativas, mais intensamente do que nas sociedades comerciais, o capital social mínimo não desempenha eficientemente as funções que lhe são tradicionalmente atribuídas. Conclui-se, igualmente, que a avaliação do nível de capitalização das cooperativas não pode atender apenas a este instituto, devendo ter em conta o património da cooperativa ressalvado para garantia dos credores, com particular destaque para a reserva legal.

Multi-criteria optimisation approach to increase the delivered power in radial distribution networks

This study proposes a new methodology to increase the power delivered to any load point in a radial distribution network, through the identification of new investments in order to improve the repair time. This research work is innovative and consists in proposing a full optimisation model based on mixed-integer non-linear programming considering the Pareto front technique. The goal is to achieve a reduction in repair times of the distribution networks components, while minimising the costs of that reduction as well as non-supplied energy costs. The optimisation model considers the distribution network technical constraints, the substation transformer taps, and it is able to choose the capacitor banks size. A case study based on a 33-bus distribution network is presented in order to illustrate in detail the application of the proposed methodology.

Cournot duopoly with competition in the R&D expenditures

We present a new R&D investment in a Cournot Duopoly model and we analyze the different possible types of Nash R&D investments. We observe that the new production costs region can be decomposed in three economical regions, depending on the Nash R&D investment, showing the relevance of the use of patents in new technologies.

Dermoid Tumor of the Lateral Wall of the Cavernous Sinus

BACKGROUND: Congenital intracranial dermoid tumors are very rare. The location of these dermoid lesions in the cavernous sinus and the complexity of the operative procedure for these lesions have been noted by several authors. Dermoid tumors originating in the cavernous sinus are usually interdural, and thus blurred vision is an uncommon presentation. CASE DESCRIPTION: Herein we report the first incidental case of a cavernous sinus dermoid cyst in a 21-year-old woman. CONCLUSIONS: A literature review was done and the possible treatments and approaches for this lesion are discussed. We consider that surgical treatment is indicated in most incidental cavernous sinus dermoid lesions due to the possible symptoms related to compression or rupture leading to chemical meningitis.

Abdominoplasty and Thoraco-Epigastric Flaps for Large Anterior Trunk Defects after Dermatofibrosarcoma Protuberans Wide Resection: Two Illustrative Cases

INTRODUCTION: Excision of large dermatofibrosarcoma protuberans in the anterior aspect of the trunk often results in large surgical defects that frequently dictate the need for microsurgical reconstruction. However, this option is not always available. PRESENTATION OF CASE: The authors describe two patients with very large anterior trunk dermatofibrosarcoma protuberans: one in the epigastric region and the other in the hypogastric region. In the patient with the hypogastric tumor, a classical abdominoplasty flap associated with umbilical transposition was used to cover the skin defect after muscle and fascial plication, and placement of a polypropylene mesh. In the patient with the epigastric tumor, a synthetic mesh was also placed, and the skin and subcutaneous defect was reconstructed with a reverse abdominoplasty flap and two thoraco-epigastric flaps. In both cases, complete closure was possible without immediate or late complications. DISCUSSION: The local options described in this paper present several potential advantages compared to microsurgical reconstruction, namely they are easier and faster to perform and teach; they provide a good skin color and texture match; they are not associated with distant donor site morbidity; follow-up is usually less cumbersome; the post-operative hospital stay tends to be shorter; they are less costly; they are less prone to complete failure. CONCLUSION: The authors believe that these two patients clearly show that local flaps, although frequently neglected, continue to be valid options for reconstructing large anterior trunk defects, even in the current era of microsurgery enthusiasm.

Laparoscopic Assisted Vaginal Hysterectomy Versus Vaginal Hysterectomy

Introduction: Hysterectomy is the commonest gynecologic operation, performed for malignant and benign conditions. There are many approaches to hysterectomy for benign disease. Studies comparing the techniques have showed that vaginal hysterectomy has benefits in terms of reduced hospital stay, faster recovery and less operating time. Objective: The purpose of this study is to compare the surgical and immediate postoperative outcomes of Laparoscopic Assisted Vaginal Hysterectomy (LAVH) with those of Vaginal Hysterectomy (VH). Methods: Retrospective descriptive study, comparing two groups of women who underwent LAVH or VH in our department during a 24 months period, from January 2009 to December 2010. The two groups were compared regarding age, vaginal deliveries, previous abdominal surgery, uterine and adnexal pathology, intra-operative and post-operative complications, uterus weight, blood loss and number of days until discharge. Results: In our study 42 LAVH and 99 VH were included, with a patient mean age of 47 and 59, respectively. The most frequent indication for hysterectomy was fibroids (80%) for LAVH and POP(58.6%) for HV. In LAVH group 47.6% of patients had previous abdominal surgery, vs 28.2% in VH group. The medium operative time was 167 minutes for LAVH vs 99 minutes for HV. The intra-operative complications were one case (2%) of accidental incision of rectum in LAVH, and one bladder incision in the VH (1%). There were 3 conversions to laparotomy for difficult technique (7%) in LAVH group. There were no significant post-operative complications for LAVH. In VH group there were 2 cases of haemoperitoneum (2%) and 1 case requiring blood transfusion (1%). The mean time for discharge was 4.23 days for LAVH and 4.46 days for VH. Conclusions: In our study, the main advantage for VH was the reduced operative time. In terms of time to discharge there was no difference between the 2 groups. The main intra-operative complication of LAVH was the risk of conversion to laparotomy, but post-operatively this procedure had fewer complications than VH. In conclusion, LAVH is a safe option for women requiring hysterectomy in cases where VH is anticipated to be technically difficult.

Estudio de la gestión de la variable ambiental en la generación termoeléctrica

En la actualidad, el cambio climático es uno de los temas de mayor preocupación para la población mundial y los científicos de todo el mundo. Debido al crecimiento de la población de forma exponencial, la demanda de energía aumenta acorde con ello, por lo que las actividades de producción energética aumentan consecuentemente, siendo éstas las principales causantes de la aceleración del cambio climático. Pese a que muchos países previamente habían apostado por la producción energética mediante tecnologías limpias a partir de energías renovables, hoy en día es imposible prescindir de los combustibles fósiles pues, junto a la energía nuclear, suponen el mayor porcentaje dentro del mix energético de los países más grandes del mundo, por lo que el cambio debe ser global y con todos los países implicados al unísono. Por ello, los países desarrollados decidieron acordar una serie de leyes y normas para la regulación y el control de la expansión energética en el mundo, mediante programas de incentivo a las empresas para la producción de energía limpia, libre de emisiones, sustituyendo y mejorando los procesos tecnológicos para que garanticen un desarrollo sostenible. De esta forma, se conseguiría también reducir la dependencia energética de los países productores de los recursos fósiles más importantes y a su vez, ayudar a otros sectores a diversificar su negocio y mejorar así la economía de las áreas colindantes a las centrales de producción térmica. Gracias a estos programas de incentivo o, también llamados mecanismos de flexibilidad, las empresas productoras de energía, al acometer inversiones en tecnologia limpia, dejan de emitir gases de efecto invernadero a la atmósfera. Por tanto, gracias al comercio de emisiones y al mercado voluntario, las empresas pueden vender dichas emisiones aumentando la rentabilidad de sus proyectos, haciendo más atractivo de por sí el hecho de invertir en tecnología limpia. En el proyecto desarrollado, se podrá comprobar de una forma más extensa todo lo anteriormente citado. Para ello, se desarrollará una herramienta de cálculo que nos permitirá analizar los beneficios obtenidos por la sustitución de un combustible fósil, no renovable, por otro renovable y sostenible, como es la biomasa. En esta herramienta se calcularán, de forma estimada, las reducciones de las emisiones de CO2 que supone dicha sustitución y se hallará, en función del valor de las cotizaciones de los bonos de carbono en los diferentes mercados, cuál será el beneficio económico obtenido por la venta de las emisiones no emitidas que supone esta sustitución. Por último, dicho beneficio será insertado en un balance económico de la central donde se tendrán en cuenta otras variables como el precio del combustible o las fluctuaciones del precio de la electricidad, para hallar finalmente la rentabilidad que supondría la inversión de esta adaptación en la central. Con el fin de complementar y aplicar la herramienta de cálculo, se analizarán dos casos prácticos de una central de carbón, en los cuales se decide su suscripción dentro del contexto de los mecanismos de flexibilidad creados en los acuerdos internacionales.

Crowdsourcing innovation: a strategy to leverage enterprise innovation

Innovation is recognized by academics and practitioners as an essential competitive enabler for any company to survive, to remain competitive and to grow. Investments in tasks of R&D have not always brought the expected results. But that doesn't mean that the outcomes would not be useful to other companies of the same business area or even from another area. Thus, there is much knowledge already available in the market that can be helpful to some and profitable to others. So, the ideas and expertise can be found outside a company's boundaries and also exported from within. Information, knowledge, experience, wisdom is already available in the millions of the human beings of this planet, the challenge is to use them through a network to produce new ideas and tips that can be useful to a company with less costs. This was the reason for the emergence of the area of crowdsourcing innovation. Crowdsourcing innovation is a way of using the Web 2.0 tools to generate new ideas through the heterogeneous knowledge available in the global network of individuals highly qualified and with easy access to information and technology. So, a crowdsourcing innovation broker is an organization that mediates the communication and relationship between the seekers - companies that aspire to solve some problem or to take advantage of any business opportunity - with a crowd that is prone to give ideas based on their knowledge, experience and wisdom. This paper makes a literature review on models of open innovation, crowdsourcing innovation, and technology and knowledge intermediaries, and discusses this new phenomenon as a way to leverage the innovation capacity of enterprises. Finally, the paper outlines a research design agendafor explaining crowdsourcing innovation brokering phenomenon, exploiting its players, main functions, value creation process, and knowledge creation in order to define a knowledge metamodel of such intermediaries.