ILS glideslope evaluation for imperfect terrain

Instrument landing systems (ILS) are normally designed assuming the site around them to be flat. Uneven terrain results in undulations in the glidescope. In recent years, models have been evolved for predicting such aberrations as a simpler alternative to experimental methods. Such modeling normally assumes the ground to be fully conducting. A method is presented for considering imperfect terrain conductivity within the framework of the uniform theory of diffraction (UTD). A single impedance wedge formulation is developed to a form that resembles the standard form of UTD, with only one extra term in the diffraction coefficient. This extends the applicability of the standard UTD formulation and software packages to the case of the imperfectly conducting terrain. The method has been applied to a real airport site in India and improved agreement with measured glidescope parameters is demonstrated

Nonsingular cosmological models: the massive scalar field case

The nonminimal coupling of a massive self-interacting scalar field with a gravitational field is studied. Spontaneous symmetry breaking occurs in the open universe even when the sign on the mass term is positive. In contrast to grand unified theories, symmetry breakdown is more important for the early universe and it is restored only in the limit of an infinite expansion. Symmetry breakdown is shown to occur in flat and closed universes when the mass term carries a wrong sign. The model has a naturally defined effective gravitational coupling coefficient which is rendered time-dependent due to the novel symmetry breakdown. It changes sign below a critical value of the cosmic scale factor indicating the onset of a repulsive field. The presence of the mass term severely alters the behaviour of ordinary matter and radiation in the early universe. The total energy density becomes negative in a certain domain. These features make possible a nonsingular cosm

Stereochemistry of collagen

This review article, based on a lecture delivered in Madras in 1985, is an account of the author's experience in the working out of the molecular structure and conformation of the collagen triple-helix over the years 1952–78. It starts with the first proposal of the correct triple-helix in 1954, but with three residues per turn, which was later refined in 1955 into a coiled-coil structure with approximately 3.3 residues per turn. The structure readily fitted proline and hydroxyproline residues and required glycine as every third residue in each of the three chains. The controversy regarding the number of hydrogen bonds per tripeptide could not be resolved by X-ray diffraction or energy minimization, but physicochemical data, obtained in other laboratories during 1961–65, strongly pointed to two hydrogen bonds, as suggested by the author. However, it was felt that the structure with one straight NH … O bond was better. A reconciliation of the two was obtained in Chicago in 1968, by showing that the second hydrogen bond is via a water molecule, which makes it weaker, as found in the physicochemical studies mentioned above. This water molecule was also shown, in 1973, to take part in further cross-linking hydrogen bonds with the OH group of hydroxyproline, which occurred always in the location previous to glycine, and is at the right distance from the water. Thus, almost all features of the primary structure, X-ray pattern, optical and hydrodynamic data, and the role of hydroxyproline in stabilising the triple helical structure, have been satisfactorily accounted for. These also lead to a confirmation of Pauling's theory that vitamin C improves immunity to diseases, as explained in the last section.

Governmental rationalities and the local dimension of European politics. A study of the Interreg IV programme "Alpenrhein-Bodensee-Hochrhein"

The thesis aims at investigating the local dimension of the EU cohesion policy through the utilization of an alternative approach, which aims at the analysis of discourse and structures of power. The concrete case under analysis is the Interreg IV programme “Alpenrhein-Bodensee-Hochrhein”, which is conducted in the border region between Germany, Switzerland, Austria and the principality of Liechtenstein. The main research question is stated as such: What governmental rationalities can be found at work in the field of EU cross-border cooperation programmes? How is directive action and cooperation envisioned? How coherent are the different rationalities, which are found at work? The theoretical framework is based on a Foucaultian understanding of power and discourse and utilizes the notion of governmentalities as a way to de-stabilize the understanding of directive action and in order to highlight the dispersed and heterogeneous nature of governmental activity. The approach is situated within the general field of research on the European Union connected to basic conceptualisations such as the nature of power, the role of discourse and modes of subjectification. An approach termed “analytics of government”, based on the work of researchers like Mitchell Dean is introduced as the basic framework for the analysis. Four dimensions (visiblities, subjectivities, techniques/practices, problematisations) are presented as a set of tools with which governmental regimes of practices can be analysed. The empirical part of the thesis starts out with a discussion of the general framework of the European Union's cohesion policy and places the Interreg IV Alpenrhein-Bodensee-Hochrhein programme in this general context. The main analysis is based on eleven interviews which were conducted with different individuals, participating in the programme on different levels. The selection of interview partners aimed at maximising heterogeneity through including individuals from all parts of the programme region, obtaining different functions within the programme. The analysis reveals interesting aspects pertaining to the implementation and routine aspects of work within initiatives conducted under the heading of the EU cohesion policy. The central aspects of an Interreg IV Alpenrhein-Bodensee-Hochrhein – governmentality are sketched out. This includes a positive perception of the work atmosphere, administrative/professional characterisation of the selves and a de-politicization of the programme. Characteristic is the experience of tensions by interview partners and the use of discoursive strategies to resolve them. Negative perceptions play an important role for the specific governmental rationality. The thesis contributes to a better understanding of the local dimension of the European Union cohesion policy and questions established ways of thinking about governmental activity. It provides an insight into the working of power mechanisms in the constitution of fields of discourse and points out matters of practical importance as well as subsequent research questions.

Edge reinforced circular elastic inclusions in cylindrical shells

The effect of having an edge reinforcement around a circular elastic inclusion in a cylindrical shell is studied. The influence of various parameters of the reinforcement such as area of cross section and moment of inertia on the stress concentrations around the inclusion is investigated. It is found that for certain inclusion parameters it is possible to get an optimum reinforcement, which gives minimum stress concentration around the inclusion. The effect of moment of inertia of the reinforcement of SCF is found to be negligible. The results are plotted in a non-dimensional form and a comparison with flat plate results is made which show the curvature effect. In the limiting case of a rigid reinforcement the results tend to those of a rigid circular inclusion. Results are also presented for different values of μe the ratio of extensional rigidity of shell to that of the inclusion.

Koneellisen annosjakelupalvelun aloittaminen - lääkehoidon tarkistus ja sen vaikutus potilaan lääkehoitoon

Farmaseuttisilla palveluilla tarkoitetaan apteekkien palveluita, joissa hyödynnetään apteekin farmaseuttisen henkilökunnan tietoja ja taitoja. Farmaseuttiset palvelut voidaan jakaa farmaseuttisiin perus- ja erityispalveluihin. Farmaseuttiset peruspalvelut kattavat apteekkien lakisääteiset tehtävät, kun taas farmaseuttisilla erityispalveluilla pyritään ottamaan aktiivisempi rooli asiakkaan terveyden edistämisessä. Koneellinen annosjakelupalvelu on farmaseuttinen erityispalvelu. Koneellisessa annosjakelupalvelussa lääkkeet jaetaan kerta-annospusseihin annostusajankohdan mukaan. Kun uusi asiakas aloittaa koneellinen annosjakelupalvelun, tarkistetaan asiakkaan lääkitys yhteensopimattomien ja turhien lääkkeiden osalta. Palvelun aloitushetkellä huomioidaan myös lääkevalmisteiden sopivuus koneelliseen annosjakeluun sekä tarkistetaan valmisteiden annosteluajankohdat. Koneellisessa annosjakelupalvelussa asiakkaan lääkehoidosta muodostetaan lääkityskortti, josta kokonaislääkehoito on helppo tarkistaa. Erikoistyön tavoitteena oli selvittää millainen lääkehoidon arviointi tai tarkistus koneellisen annosjakelupalvelun aloittamisen yhteydessä tehdään ja miten palvelun aloittavien asiakkaiden kokonaislääkehoitotieto saadaan selvitettyä. Lisäksi selvitettiin millaisia muutoksia lääkehoitoihin tehdään palvelun aloittamisen yhteydessä, mitkä ovat muutosten syyt sekä millainen on asiakkaan kokonaislääkehoito. Kyselylomake lähetettiin kaikkiin apteekkeihin, jotka tilasivat koneellista annosjakelua sopimusvalmistuksena Espoonlahden apteekilta syyskuussa 2010. Tutkimus suoritettiin semistrukturoidulla kirjallisella kyselyllä, joka sisälsi sekä avoimia kysymyksiä että monivalintakysymyksiä. Kyselyyn saatiin 147 vastausta ja vastausprosentiksi muodostui 45. Vastauksia kyselyyn saatiin koko Mannersuomen alueelta ja kaikkien kokoluokkien apteekeilta. Koneellisen annosjakelupalvelun aloittavat henkilöt ovat pääasiassa iäkkäitä, jotka ovat kotihoidon piirissä, asuvat hoitokodissa tai palveluasumisen yksikössä. Asiakkaiden lääkitystietojen keräämisessä hyödynnetään lääkityskorttia, mutta lääkityskortin tietoja päivitetään myös muista lähteistä. Asiakkaiden lääkityksille tehdään useimmiten lääkehoidon tarkistus moniammatillisena yhteistyönä. Lääkehoidolle tehdyt muutokset johtuvat pääasiassa lääkevaihdosta, annosjakelukoneen lääkevalikoimasta tai puolittamisen välttämisestä. Lääkehoidoissa on vain vähän yhteisvaikutuksia, jotka johtavat lääkevalmisteen käytön lopettamiseen. Lääkehoidon tarkistuksella ei ollut suurta vaikutusta asiakkaiden käyttämien lääkevalmisteiden määrään. Palvelun aloittamisen jälkeen asiakkaalla on käytössään keskimäärin 11 lääkevalmistetta, joista seitsemää jaellaan koneellisesti. Lääkeaineryhmistä eniten käytettyjä ovat hermostoon vaikuttavat sekä sydän- ja verisuonisairauksien lääkkeet, joita kumpaakin on käytössä keskimäärin kolme jokaisella uudella koneellisen annosjakelupalvelun asiakkaalla sekä palvelun aloittamista ennen että sen jälkeen.

Estimation of cutting volume with three inventory methods for harvest planning in Canadian boreal forests.

Two methods of pre-harvest inventory were designed and tested on three cutting sites containing a total of 197 500 m3 of wood. These sites were located on flat-ground boreal forests located in northwestern Quebec. Both methods studied involved scaling of trees harvested to clear the road path one year (or more) prior to harvest of adjacent cut-blocks. The first method (ROAD) considers the total road right-of-way volume divided by the total road area cleared. The resulting volume per hectare is then multiplied by the total cut-block area scheduled for harvest during the following year to obtain the total estimated cutting volume. The second method (STRATIFIED) also involves scaling of trees cleared from the road. However, in STRATIFIED, log scaling data are stratified by forest stand location. A volume per hectare is calculated for each stretch of road that crosses a single forest stand. This volume per hectare is then multiplied by the remaining area of the same forest stand scheduled for harvest one year later. The sum of all resulting estimated volumes per stand gives the total estimated cutting-volume for all cut-blocks adjacent to the studied road. A third method (MNR) was also used to estimate cut-volumes of the sites studied. This method represents the actual existing technique for estimating cutting volume in the province of Quebec. It involves summing the cut volume for all forest stands. The cut volume is estimated by multiplying the area of each stand by its estimated volume per hectare obtained from standard stock tables provided by the governement. The resulting total estimated volume per cut-block for all three methods was then compared with the actual measured cut-block volume (MEASURED). This analysis revealed a significant difference between MEASURED and MNR methods with the MNR volume estimate being 30 % higher than MEASURED. However, no significant difference from MEASURED was observed for volume estimates for the ROAD and STRATIFIED methods which respectively had estimated cutting volumes 19 % and 5 % lower than MEASURED. Thus the ROAD and STRATIFIED methods are good ways to estimate cut-block volumes after road right-of-way harvest for conditions similar to those examined in this study.

Nanoscale studies of materials using x-ray synchrotron radiation and mesoscopic modelling

X-ray synchrotron radiation was used to study the nanostructure of cellulose in Norway spruce stem wood and powders of cobalt nanoparticles in cellulose support. Furthermore, the growth of metallic clusters was modelled and simulated in the mesoscopic size scale. Norway spruce was characterized with x-ray microanalysis at beamline ID18F of the European Synchrotron Radiation Facility in Grenoble. The average dimensions and the orientation of cellulose crystallites was determined using x-ray microdiffraction. In addition, the nutrient element content was determined using x-ray fluorescence spectroscopy. Diffraction patterns and fluorescence spectra were simultaneously acquired. Cobalt nanoparticles in cellulose support were characterized with x-ray absorption spectroscopy at beamline X1 of the Deutsches Elektronen-Synchrotron in Hamburg, complemented by home lab experiments including x-ray diffraction, electron microscopy and measurement of magnetic properties with a vibrating sample magnetometer. Extended x-ray absorption fine structure spectroscopy (EXAFS) and x-ray diffraction were used to solve the atomic arrangement of the cobalt nanoparticles. Scanning- and transmission electron microscopy were used to image the surfaces of the cellulose fibrils, where the growth of nanoparticles takes place. The EXAFS experiment was complemented by computational coordination number calculations on ideal spherical nanocrystals. The growth process of metallic nanoclusters on cellulose matrix is assumed to be rather complicated, affected not only by the properties of the clusters themselves, but essentially depending on the cluster-fiber interfaces as well as the morphology of the fiber surfaces. The final favored average size for nanoclusters, if such exists, is most probably a consequence of these two competing tendencies towards size selection, one governed by pore sizes, the other by the cluster properties. In this thesis, a mesoscopic model for the growth of metallic nanoclusters on porous cellulose fiber (or inorganic) surfaces is developed. The first step in modelling was to evaluate the special case of how the growth proceeds on flat or wedged surfaces.

Trajectories of charged particles in the static Ernst space-time

The authors study the trajectories of charged particles in Ernst's space-time representing a static black hole immersed in a magnetic field. They find bound orbits always exist for realistic magnetic field strengths. A similar investigation is carried out for the case of Melvin's magnetic universe and for a corresponding test field superposed on a flat space-time.

Heterogeneous nucleation of solidification of cadmium particles embedded in an aluminium matrix

A hypomonotectic alloy of Al-4.5wt%Cd has been manufactured by melt spinning and the resulting microstructure examined by transmission electron microscopy. As-melt spun hypomonotectic Al-4.5wt%Cd consists of a homogeneous distribution of faceted 5 to 120 nm diameter cadmium particles embedded in a matrix of aluminium, formed during the monotectic solidification reaction. The cadmium particles exhibit an orientation relationship with the aluminium matrix of {111}Al//{0001}Cd and lang110rangAlAl//lang11¯20> Cd, with four cadmium particle variants depending upon which of the four {111}Al planes is parallel to {0001}Cd. The cadmium particles exibit a distorted cuboctahedral shape, bounded by six curved {100}Al//{20¯23}Cd facets, six curved {111}Al/{40¯43}Cd facets and two flat {111}Al//{0001}Cd facets. The as-melt spun cadmium particle shape is metastable and the cadmium particles equilibrate during heat treatment below the cadmium melting point, becoming elongated to increase the surface area and decrease the separation of the {111}Al//{0001}Cd facets. The equilibrium cadmium particle shape and, therefore, the anisotropy of solid aluminium-solid cadmium and solid aluminium -liquid cadmium surface energies have been monitored by in situ heating in the transmission electron microscope over the temperature range between room temperature and 420 °C. The anisotropy of solid aluminium-solid cadmium surface energy is constant between room temperature and the cadmium melting point, with the {100}Al//{20¯23}Cd surface energy on average 40% greater than the {111}Al//{0001}Cd surface energy, and 10% greater than the {111}Al//{40¯43Cd surface energy. When the cadmium particles melt at temperatures above 321 °C, the {100}Al//{20¯23}Cd facets disappear and the {111}Al//{40¯43}Cd and {111}A1//{0001}Cd surface energies become equal. The {111}Al facets do not disappear when the cadmium particles melt, and the anisotropy of solid aluminium-liquid cadmium surface energy decreases gradually with increasing temperature above the cadmium melting point. The kinetics of cadmium solidification have been examined by heating and cooling experiments in a differential scanning calorimeter over a range of heating and cooling rates. Cadmium particle solidification is nucleated catalytically by the surrounding aluminium matrix on the {111}Al faceted surfaces, with an undercooling of 56 K and a contact angle of 42 °. The nucleation kinetics of cadmium particle solidification are in good agreement with the hemispherical cap model of heterogeneous nucleation.

Micromechanics Of Fatigue Crack-Growth At Low Stress Intensities In A High-Strength Steel

An attempt to systematically investigate the effects of microstructural parameters in influencing the resistance to fatigue crack growth (FCG) in the near-threshold region under three different temper levels has been made for a high strength low alloy steel to observe in general, widely different trends in the dependence of both the total threshold stress intensity range, DELTA-K(th) and the intrinsic or effective threshold stress intensity range, DELTA-K(eff-th) on the prior austenitic grain size (PAGS). While a low strain hardening microstructure obtained by tempering at high temperatures exhibited strong dependence of DELTA-K(th) on the PAGS by virtue of strong interactions of crack tip slip with the grain boundary, a high strength, high strain hardening microstructure as a result of tempering at low temperature exhibited a weak dependence. The lack of a systematic variation of the near-threshold parameters with respect to grain size in temper embrittled structures appears to be related to the wide variations in the amount of intergranular fracture near threshold. Crack closure, to some extent provides a basis on which the increases in DELTA-K(th) at larger grain sizes can be rationalised. This study, in addition, provides a wide perspective on the relative roles of slip behaviour embrittlement and environment that result in the different trends observed in the grain size dependence of near-threshold fatigue parameters, based on which the inconsistency in the results reported in the literature can be clearly understood. Assessment of fracture modes through extensive fractography revealed that prior austenitic grain boundaries are effective barriers to cyclic crack growth compared to martensitic packet boundaries, especially at low stress intensities. Fracture morphologies comprising of low energy flat transgranular fracture can occur close to threshold depending on the combinations of strain hardening behaviour, yield strength and embrittlement effects. A detailed consideration is given to the discussion of cyclic stress strain behaviour, embrittlement and environmental effects and the implications of these phenomena on the crack growth behaviour near threshold.

Molekyylibiologisten menetelmien kehittäminen ihmisen suoliston sulfaattia pelkistävien bakteerien määrittämiseksi

Ihmisen ruuansulatuskanavan bakteeriston kehitys alkaa syntymästä, jolloin ensimmäiset bakteerit kansoittavat steriilin ruuansulatuskanavan. Bakteeristo kehittyy perimän, ympäristön ja varhaisen ruokavalion vaikutuksesta kohti monimuotoisempaa bakteeripopulaatiota. Aikuisen ruuansulatuskanavan normaalibakteeristo on varsin muuttumaton, mutta siihen vaikuttavat monet tekijät, kuten ikä, terveydentila, ruokavalio ja antibioottien käyttö. Bakteeriston koostumus vaihtelee ruuansulatuskanavan eri osissa ja bakteerimäärä kasvaa kohti paksusuolta, ollen paksusuolessa ja ulosteessa peräti 1010-1012 pmy/ml. Suurin osa ruuansulatuskanavan bakteereista on anaerobeja. Ruuansulatuskanavan bakteeristo vaikuttaa muun muassa suoliston kehittymiseen ja hiilihydraattien ja proteiinien hajotukseen sekä toimii osana immuunipuolustusta. Sulfaattia pelkistävät bakteerit (SRB) ovat monimuotoinen ryhmä pääosin anaerobisia bakteereita, jotka käyttävät aineenvaihdunnassaan elektronin vastaanottajana sulfaattia muuttaen sen lopulta sulfidiksi. SRB:t ovat sopeutuneet useisiin erilaisiin ympäristöihin. Niitä tavataan mm. vesistöjen sedimenteissä sekä ihmisen ruuansulatuskanavassa. Ihmisen ruuansulatuskanavassa on SRB:ta n. 105-108 pmy/g, ja niitä on löydetty erityisesti anaerobisista osista kuten suun ientaskuista ja paksusuolesta. SRB:t voivat olla haitaksi ruuansulatuskanavalle tuottamansa sulfidin vuoksi, joka esiintyy vesiliuoksessa vetysulfidina. Tämän on havaittu olevan toksista suoliston epiteelisoluille. Viimeaikoina on kiinnostuttu sulfaatinpelkistäjien yhteydestä suoliston sairaustiloihin, kuten tulehduksellisiin suolistosairauksiin (IBD). Pro gradu -tutkimukseni tavoitteena oli kehittää PCR-DGGE- ja qPCR-menetelmät ulosteen sulfaattia pelkistävien bakteerien määritykseen. Kohdegeeninä menetelmänkehityksessä käytettiin dsrAB-geeniä, joka koodaa dissimilatorista sulfiitinpelkistysentsyymiä. dsrAB-geeni on sulfaatinpelkistäjille ominainen konservoitunut geenialue, johon perustuvia tutkimuksia ei vielä ole paljon ihmispuolelta. qPCR-menetelmä saatiin optimoitua herkäksi ja spesifiseksi käyttäen dsrA-geenispesifisiä alukkeita, mutta PCR-DGGE-menetelmää ei saatu optimoitua käytössä olleilla alukkeilla, jotka monistivat PCR-DGGE:ssa myös negatiivikontrollikantoja. Tutkittaessa qPCR:lla IBD:tä (Crohn ja ulseratiivinen koliitti) sairastavien lasten ja terveiden kontrollihenkilöiden ulostenäytteistä eristettyä DNA:ta, merkittävää eroa SRB-määrissä ei havaittu eri ryhmien välillä. Crohnin tautia sairastavien aktiivisen vaiheen ja oireettoman vaiheen näytteiden välillä oli kuitenkin tilastollisesti merkitsevä ero (SRB-määrät; oireeton vaihe>oireellinen vaihe) (P <0,05).

Operationalizing Supply Chain vs. Supply Chain Competion

Competition is an immensely important area of study in economic theory, business and strategy. It is known to be vital in meeting consumers’ growing expectations, stimulating increase in the size of the market, pushing innovation, reducing cost and consequently generating better value for end users, among other things. Having said that, it is important to recognize that supply chains, as we know it, has changed the way companies deal with each other both in confrontational or conciliatory terms. As such, with the rise of global markets and outsourcing destinations, increased technological development in transportation, communication and telecommunications has meant that geographical barriers of distance with regards to competition are a thing of the past in an increasingly flat world. Even though the dominant articulation of competition within management and business literature rests mostly within economic competition theory, this thesis draws attention to the implicit shift in the recognition of other forms of competition in today’s business environment, especially those involving supply chain structures. Thus, there is popular agreement within a broad business arena that competition between companies is set to take place along their supply chains. Hence, management’s attention has been focused on how supply chains could become more aggressive making each firm in its supply chain more efficient. However, there is much disagreement on the mechanism through which such competition pitching supply chain against supply chain will take place. The purpose of this thesis therefore, is to develop and conceptualize the notion of supply chain vs. supply chain competition, within the discipline of supply chain management. The thesis proposes that competition between supply chains may be carried forward via the use of competition theories that emphasize interaction and dimensionality, hence, encountering friction from a number of sources in their search for critical resources and services. The thesis demonstrates how supply chain vs. supply chain competition may be carried out theoretically, using generated data for illustration, and practically using logistics centers as a way to provide a link between theory and corresponding practice of this evolving competition mode. The thesis concludes that supply chain vs. supply chain competition, no matter the conceptualization taken, is complex, novel and can be very easily distorted and abused. It therefore calls for the joint development of regulatory measures by practitioners and policymakers alike, to guide this developing mode of competition.

A finite element analysis of dynamic fracture initiation by ductile failure mechanisms in a 4340 steel

In some recent dropweight impact experiments [5] with pre-notched bend specimens of 4340 steel, it was observed that considerable crack tunneling occurred in the interior of the specimen prior to gross fracture initiation on the free surfaces. The final failure of the side ligaments happened because of shear lip formation. The tunneled region is characterized by a flat, fibrous fracture surface. In this paper, the experiments of [5] (corresponding to 5 m/s impact speed) are analyzed using a plane strain, dynamic finite element procedure. The Gurson constitutive model that accounts for the ductile failure mechanisms of micro-void nucleation, growth and coalescence is employed. The time at which incipient failure was observed near the notch tip in this computation, and the value of the dynamic J-integral, J d, at this time, compare reasonably well with experiments. This investigation shows that J-controlled stress and deformation fields are established near the notch tip whenever J d , increases with time. Also, it is found that the evolution of micro-mechanical quantities near the notch root can be correlated with the time variation of J d .The strain rate and the adiabatic temperature rise experienced at the notch root are examined. Finally, spatial variations of stresses and deformations are analyzed in detail.

Temperature-Sensitive Src-Transformed Mdck Cells nn 3d Cultures as a Model of Malignant Transformation of Epithelial Cells

The equilibrium between cell proliferation, differentiation, and apoptosis is crucial for maintaining homeostasis in epithelial tissues. In order for the epithelium to function properly, individual cells must gain normal structural and functional polarity. The junctional proteins have an important role both in binding the cells together and in taking part in cell signaling. Cadherins form adherens junctions. Cadherins initiate the polarization process by first recognizing and binding the neighboring cells together, and then guiding the formation of tight junctions. Tight junctions form a barrier in dividing the plasma membranes to apical and basolateral membrane domains. In glandular tissues, single layered and polarized epithelium is folded into tubes or spheres, in which the basal side of the epithelial layer faces the outer basal membrane, and the apical side the lumen. In carcinogenesis, the differentiated architecture of an epithelial layer is disrupted. Filling of the luminal space is a hallmark of early epithelial tumors in tubular and glandular structures. In order for the transformed tumor cells to populate the lumen, enhanced proliferation as well as inhibition of apoptosis is required. Most advances in cancer biology have been achieved by using two-dimensional (2D) cell culture models, in which the cells are cultured on flat surfaces as monolayers. However, the 2D cultures are limited in their capacity to recapitulate the structural and functional features of tubular structures and to represent cell growth and differentiation in vivo. The development of three-dimensional (3D) cell culture methods enables the cells to grow and to be studied in a more natural environment. Despite the wide use of 2D cell culture models and the development of novel 3D culture methods, it is not clear how the change of the dimensionality of culture conditions alters the polarization and transformation process and the molecular mechanisms behind them. Src is a well-known oncogene. It is found in focal and adherens junctions of cultured cells. Active src disrupts cell-cell junctions and interferes with cell-matrix binding. It promotes cell motility and survival. Src transformation in 2D disrupts adherens junctions and the fibroblastic phenotype of the cells. In 3D, the adherens junctions are weakened, and in glandular structures, the lumen is filled with nonpolarized vital cells. Madin-Darby canine kidney (MDCK) cells are an epithelial cell type commonly used as a model for cell polarization. Its-src-transformed variants are useful model systems for analyzing the changes in cell morphology, and they play a role in src-induced malignant transformation. This study investigates src-transformed cells in 3D cell cultures as a model for malignant transformation. The following questions were posed. Firstly: What is the role of the composition and stiffness of the extracellular matrix (ECM) on the polarization and transformation of ts v-src MDCK cells in 3D cell cultures? Secondly: How do the culture conditions affect gene expression? What is the effect of v-src transformation in 2D and in 3D cell models? How does the shift from 2D to 3D affect cell polarity and gene expression? Thirdly: What is the role of survivin and its regulator phosphatase and tensin homolog protein (PTEN) in cell polarization and transformation, and in determining cell fate? How does their expression correlate with impaired mitochondrial function in transformed cells? In order to answer the above questions, novel methods of culturing and monitoring cells had to be created: novel 3D methods of culturing epithelial cells were engineered, enabling real time monitoring of a polarization and transformation process, and functional testing of 3D cell cultures. Novel 3D cell culture models and imaging techniques were created for the study. Attention was focused especially on confocal microscopy and live-cell imaging. Src-transformation disturbed the polarization of the epithelium by disrupting cell adhesion, and sensitized the cells to their environment. With active src, the morphology of the cell cluster depended on the composition and stiffness of the matrix. Gene expression studies revealed a broader impact of src transformation than mere continuous activity of src-kinase. In 2D cultures, src transformation altered the expression of immunological, actin cytoskeleton and extracellular matrix (ECM). In 3D, the genes regulating cell division, inhibition of apoptosis, cell metabolism, mitochondrial function, actin cytoskeleton and mechano-sensing proteins were altered. Surprisingly, changing the culture conditions from 2D to 3D affected also gene expression considerably. The microarray hit survivin, an inhibitor of apoptosis, played a crucial role in the survival and proliferation of src-transformed cells.