Tuhkalannoitteiden fosforin pidättyminen turpeeseen : miksi pidättyminen on tehokasta turpeen huonosta sitomiskyvystä huolimatta?

Seloste artikkelista: Phosphorus allocation in surface soil of two drained peatland forests following wood and peat ash application : why effective adsorption on low sorptive soils? Silva Fennica 41 (2007) : 3, s. 395-407.

Harvennuksen ja lannoituksen vaikutus kuusen puuaineen ja kuitujen ominaisuuksiin : tuloksia pitkään seuratuilta kenttäkokeilta

Seloste väitöskirjasta: The effects of thinning and fertilisation on wood and tracheid properties of Norway spruce (Picea abies) : the results of long-term experiments. Dissertationes Forestales 55.

Männyn kasvun ja puuaineen ominaisuuksien sekä saheiden laadun mallintaminen liittyen metsänhoitoon

Selostus väitöskirjasta: Modelling the growth and properties of stem and wood of Scots pine (Pinus sylvestris L.) as related to silvicultural management with implications for sawing yield and properties of sawn pieces. Dissertationes Forestales 65.

Kekomuurahaisten (Formica rufa -ryhmä) vaikutus maaperän ominaisuuksiin ja puuston kasvuun hoidetuissa boreaalisissa metsissä

Seloste väitöskirjasta: Wood ants (Formica rufa group) in managed boreal forests : implications for soil properties and tree growth. Dissertationes Forestales 66.

Ligniinin määrän ja ligniinin modifioinnin vaikutus kuusen puuaineen ominaisuuksiin ja lahonkestoon

Seloste väitöskirjasta: The effect of lignin content and lignin modification on Norway spruce wood properties and decay resistance. Dissertationes Forestales 68.

Optimization of wood flour acetylation by factorial design and partial least squares regression

Acetylation was performed to reduce the polarity of wood and increase its compatibility with polymer matrices for the production of composites. These reactions were performed first as a function of acetic acid and anhydride concentration in a mixture catalyzed by sulfuric acid. A concentration of 50%/50% (v/v) of acetic acid and anhydride was found to produced the highest conversion rate between the functional groups. After these reactions, the kinetics were investigated by varying times and temperatures using a 3² factorial design, and showed time was the most relevant parameter in determining the conversion of hydroxyl into carbonyl groups.

Classificação de resíduos de madeira tratada com preservativos à base de arseniato de cobre cromatado e de boro/flúor

Classification of waste wood treated with chromated copper arsenate (CCA) and boron/fluorine preservatives, according to NBR 10004, was investigated. The leaching test (ABNT NBR 10005) for As and Cr, and solubilization test (ABNT NBR 10006) for F, were applied to out-of-service wooden poles. Concentrations of As and Cr in leachates were determined by ICP-MS and of F by ESI. Values for As were higher than 1 mg L-1 classifying the waste as hazardous material (Class I) whereas values for F (> 1.5 mg L-1) were non-hazardous but indicated non-inert material (Class IIA).

Elementos traço em material particulado atmosférico de uma região agroindustrial do sudeste do Brasil

Trace element concentrations were measured in atmospheric particulate matter collected in 2009 and 2010, in a Brazilian region influenced by pre-harvest burning of sugar cane crops. For coarse particles, high concentrations of Al, Fe, K and Ca suggested that re-suspended soil dust was the main source of aerosol trace elements, subsequently confirmed by XRD analysis. High levels of K, Zn, As, Cd and Pb were found in fine particles, confirming the contribution of biomass burning and vehicle emissions, whereas Na, Al, K, Fe and Zn were the representative elements in ultrafine particles, influenced by a diversity of sources.

Caracterização detalhada de material de referência certificado de carvão brasileiro

The use and characterization of the first Certified Reference Material (CRM) of Brazilian coal for analytical quality control are presented. All results were determined within the limits of repeatability and reproducibility allowed under the standards. Notable among the characterization parameters was the mineral matter content (45.39%) obtained by an alternative procedure showing a low relative error (-2.1%) compared to the standard technique (low ashing temperature). The possible expanded application of this CRM application in national laboratories, beyond the certificated and reference parameters, has advantages such as lower cost and easy availability, but round robin tests must be performed.

Análise exploratória rápida e não destrutiva (screening) da presença de elementos químicos tóxicos em material escolar por fluorescência de raios x

Compulsory in Brazil, toy certification aims to prevent possible risks in toy use. The Brazilian National Institute of Metrology (INMETRO) establishes the maximum concentration of toxic elements (TE) that may be present in toys. This study evaluates the presence of TE in different crayons, gouache and modeling clays using X-ray fluorescence. This technique is fast, has low operating cost and minimum sample pretreatment, resulting in a clean procedure without reagent consumption and waste generation. Bromine (in gouache) and Barium (in crayons) were the only potentially TE identified in the samples studied.

Síntesis química, estudios de caracterización y reactividad de un material catalítico a base de ZrO2-H3PW12O40

In this work, the preparation and characterization of materials such as zirconium oxide (ZrO2) and phosphotungstic acid promoted zirconium oxide (ZrO2-H3PW12O40) is presented. Physico-chemical characterization results showed that addition of H3PW12O40 acted as both a textural and chemical promoter of zirconium oxide. The incorporation of phosphotungstic acid into the ZrO2 matrix delayed the sintering of the material and stabilized ZrO2 in the tetragonal phase. ZrO2 acidity was also enhanced, developing strong acid sites on its surface. The Pt/ZrO2-H3PW12O40 catalyst was active for n-pentane isomerization at 250 °C, exhibiting high selectivity to iso-pentane (95%). This result is probably due to its suitable acidity.

Síntese do material mesoporoso MCM-41 usando esponja de água-doce como fonte de sílica

Fresh water sponge was used as a silica source for the synthesis of MCM-41 via the hydrothermal process. The silica was extracted from the sponge by washing with nitric acid and piranha solution. Synthesis of MCM-41 was performed at 100 °C for 5 days and the procedure was optimized, with modifications made to the leaching temperature of the silica and the synthesis of mesoporous material, which was characterized by XRD, FT-IR, SEM and adsorption of N2. The optimal result was achieved at a temperature of 135 °C for 3 days, showing ordered mesoporous material with a surface area of 1080 m² g-1.

Bateria de métricas para avaliação da verdura material de reações de síntese

The use of a battery of three mass metrics (atomic economy - AE, reaction mass efficiency - RME, and mass intensity - MI) for systemic evaluation of the material greenness of synthesis reactions is presented. Material greenness is discussed in terms of materialization/dematerialization of the reaction system and also according to the first two Principles of Green Chemistry, and is shown to involve two components: atomic greenness (incorporation of the atoms provided by reagents into the product, evaluated by AE and RME); and massic greenness (global mass of reagents and non-stoichiometric materials, evaluated by MI, related to the production of residues).

Theoretical investigations of the bulk modulus in the tetra-cubic transition of PbTiO3 material

Resulting from ion displacement in a solid under pressure, piezoelectricity is an electrical polarization that can be observed in perovskite-type electronic ceramics, such as PbTiO3, which present cubic and tetragonal symmetries at different pressures. The transition between these crystalline phases is determined theoretically through the bulk modulus from the relationship between material energy and volume. However, the change in the material molecular structure is responsible for the piezoelectric effect. In this study, density functional theory calculations using the Becke 3-Parameter-Lee-Yang-Parr hybrid functional were employed to investigate the structure and properties associated with the transition state of the tetragonal-cubic phase change in PbTiO3 material.