Towards a dignified and sustainable electricity generation sector in Australia : a comparative review of three models

Electricity is the cornerstone of modern life. It is essential to economic stability and growth, jobs and improved living standards. Electricity is also the fundamental ingredient for a dignified life; it is the source of such basic human requirements as cooked food, a comfortable living temperature and essential health care. For these reasons, it is unimaginable that today's economies could function without electricity and the modern energy services that it delivers. Somewhat ironically, however, the current approach to electricity generation also contributes to two of the gravest and most persistent problems threatening the livelihood of humans. These problems are anthropogenic climate change and sustained human poverty. To address these challenges, the global electricity sector must reduce its reliance on fossil fuel sources. In this context, the object of this research is twofold. Initially it is to consider the design of the Renewable Energy (Electricity) Act 2000 (Cth) (Renewable Electricity Act), which represents Australia's primary regulatory approach to increase the production of renewable sourced electricity. This analysis is conducted by reference to the regulatory models that exist in Germany and Great Britain. Within this context, this thesis then evaluates whether the Renewable Electricity Act is designed effectively to contribute to a more sustainable and dignified electricity generation sector in Australia. On the basis of the appraisal of the Renewable Electricity Act, this thesis contends that while certain aspects of the regulatory regime have merit, ultimately its design does not represent an effective and coherent regulatory approach to increase the production of renewable sourced electricity. In this regard, this thesis proposes a number of recommendations to reform the existing regime. These recommendations are not intended to provide instantaneous or simple solutions to the current regulatory regime. Instead, the purpose of these recommendations is to establish the legal foundations for an effective regulatory regime that is designed to increase the production of renewable sourced electricity in Australia in order to contribute to a more sustainable and dignified approach to electricity production.

How Can Models of Motor Control Be Useful for Understanding Low Back Pain?

Introduction. The purpose of this chapter is to address the question raised in the chapter title. Specifically, how can models of motor control help us understand low back pain (LBP)? There are several classes of models that have been used in the past for studying spinal loading, stability, and risk of injury (see Reeves and Cholewicki (2003) for a review of past modeling approaches), but for the purpose of this chapter we will focus primarily on models used to assess motor control and its effect on spine behavior. This chapter consists of 4 sections. The first section discusses why a shift in modeling approaches is needed to study motor control issues. We will argue that the current approach for studying the spine system is limited and not well-suited for assessing motor control issues related to spine function and dysfunction. The second section will explore how models can be used to gain insight into how the central nervous system (CNS) controls the spine. This segues segue nicely into the next section that will address how models of motor control can be used in the diagnosis and treatment of LBP. Finally, the last section will deal with the issue of model verification and validity. This issue is important since modelling accuracy is critical for obtaining useful insight into the behavior of the system being studied. This chapter is not intended to be a critical review of the literature, but instead intended to capture some of the discussion raised during the 2009 Spinal Control Symposium, with some elaboration on certain issues. Readers interested in more details are referred to the cited publications.

Virtual worlds in Australian and New Zealand higher education : remembering the past, understanding the present and imagining the future

3D virtual reality, including the current generation of multi-user virtual worlds, has had a long history of use in education and training, and it experienced a surge of renewed interest with the advent of Second Life in 2003. What followed shortly after were several years marked by considerable hype around the use of virtual worlds for teaching, learning and research in higher education. For the moment, uptake of the technology seems to have plateaued, with academics either maintaining the status quo and continuing to use virtual worlds as they have previously done or choosing to opt out altogether. This paper presents a brief review of the use of virtual worlds in the Australian and New Zealand higher education sector in the past and reports on its use in the sector at the present time, based on input from members of the Australian and New Zealand Virtual Worlds Working Group. It then adopts a forward-looking perspective amid the current climate of uncertainty, musing on future directions and offering suggestions for potential new applications in light of recent technological developments and innovations in the area.

Improving in vivo models of fracture fixation associated osteomyelitis

This project’s aim was to create new experimental models in small animals for the investigation of infections related to bone fracture fixation implants. Animal models are essential in orthopaedic trauma research and this study evaluated new implants and surgical techniques designed to improve standardisation in these experiments, and ultimately to minimise the number of animals needed in future work. This study developed and assessed procedures using plates and inter-locked nails to stabilise fractures in rabbit thigh bones. Fracture healing was examined with mechanical testing and histology. The results of this work contribute to improvements in future small animal infection experiments.

Rodent Models of Conditioned Fear: Behavioral Measures of Fear and Memory

Pavlovian fear conditioning is a robust technique for examining behavioral and cellular components of fear learning and memory. In fear conditioning, the subject learns to associate a previously neutral stimulus with an inherently noxious co-stimulus. The learned association is reflected in the subjects' behavior upon subsequent re-exposure to the previously neutral stimulus or the training environment. Using fear conditioning, investigators can obtain a large amount of data that describe multiple aspects of learning and memory. In a single test, researchers can evaluate functional integrity in fear circuitry, which is both well characterized and highly conserved across species. Additionally, the availability of sensitive and reliable automated scoring software makes fear conditioning amenable to high-throughput experimentation in the rodent model; thus, this model of learning and memory is particularly useful for pharmacological and toxicological screening. Due to the conserved nature of fear circuitry across species, data from Pavlovian fear conditioning are highly translatable to human models. We describe equipment and techniques needed to perform and analyze conditioned fear data. We provide two examples of fear conditioning experiments, one in rats and one in mice, and the types of data that can be collected in a single experiment. © 2012 Springer Science+Business Media, LLC.

Pavlovian fear memory circuits and phenotype models of PTSD

Pavlovian fear conditioning, also known as classical fear conditioning is an important model in the study of the neurobiology of normal and pathological fear. Progress in the neurobiology of Pavlovian fear also enhances our understanding of disorders such as posttraumatic stress disorder (PTSD) and with developing effective treatment strategies. Here we describe how Pavlovian fear conditioning is a key tool for understanding both the neurobiology of fear and the mechanisms underlying variations in fear memory strength observed across different phenotypes. First we discuss how Pavlovian fear models aspects of PTSD. Second, we describe the neural circuits of Pavlovian fear and the molecular mechanisms within these circuits that regulate fear memory. Finally, we show how fear memory strength is heritable; and describe genes which are specifically linked to both changes in Pavlovian fear behavior and to its underlying neural circuitry. These emerging data begin to define the essential genes, cells and circuits that contribute to normal and pathological fear.

BIM : enabling sustainability and asset management through knowledge management

Building Information Modeling (BIM) is the use of virtual building information models to develop building design solutions and design documentation and to analyse construction processes. Recent advances in IT have enabled advanced knowledge management, which in turn facilitates sustainability and improves asset management in the civil construction industry. There are several important qualifiers and some disadvantages of the current suite of technologies. This paper outlines the benefits, enablers, and barriers associated with BIM and makes suggestions about how these issues may be addressed. The paper highlights the advantages of BIM, particularly the increased utility and speed, enhanced fault finding in all construction phases, and enhanced collaborations and visualisation of data. The paper additionally identifies a range of issues concerning the implementation of BIM as follows: IP, liability, risks, and contracts and the authenticity of users. Implementing BIM requires investment in new technology, skills training, and development of new ways of collaboration and Trade Practices concerns. However, when these challenges are overcome, BIM as a new information technology promises a new level of collaborative engineering knowledge management, designed to facilitate sustainability and asset management issues in design, construction, asset management practices, and eventually decommissioning for the civil engineering industry.

Communication models of institutional online communities : the role of the ABC cultural intermediary

The co-creation of cultural artefacts has been democratised given the recent technological affordances of information and communication technologies. Web 2.0 technologies have enabled greater possibilities of citizen inclusion within the media conversations of their nations. For example, the Australian audience has more opportunities to collaboratively produce and tell their story to a broader audience via the public service media (PSM) facilitated platforms of the Australian Broadcasting Corporation (ABC). However, providing open collaborative production for the audience gives rise to the problem, how might the PSM manage the interests of all the stakeholders and align those interests with its legislated Charter? This paper considers this problem through the ABC’s user-created content participatory platform, ABC Pool and highlights the cultural intermediary as the role responsible for managing these tensions. This paper also suggests cultural intermediation is a useful framework for other media organisations engaging in co-creative activities with their audiences.

Communication models of institutional online communities : the role of the ABC cultural intermediary

The co-creation of cultural artefacts has been democratised given the recent technological affordances of information and communication technologies. Web 2.0 technologies have enabled greater possibilities of citizen inclusion within the media conversations of their nations. For example, the Australian audience has more opportunities to collaboratively produce and tell their story to a broader audience via the public service media (PSM) facilitated platforms of the Australian Broadcasting Corporation (ABC). However, providing open collaborative production for the audience gives rise to the problem, how might the PSM manage the interests of all the stakeholders and align those interests with its legislated Charter? This paper considers this problem through the ABC’s user-created content participatory platform, ABC Pool and highlights the cultural intermediary as the role responsible for managing these tensions. This paper also suggests cultural intermediation is a useful framework for other media organisations engaging in co-creative activities with their audiences.

Students' experience of problem-based learning in virtual space

This paper reports outcomes of a study focussed on discovering qualitatively different ways students' experience problem-based learning in virtual space. A well accepted and documented qualitative research method was adopted for this study. Five qualitatively different conceptions are described, each revealing characteristics of increasingly complex student experiences. Establishing characteristics of these more complex experiences assists teachers in facilitating students engagement and encouraging deeper learning.

What's in it for me? Virtual conspicuous donation strategies as a source of value in blood donation

Providing an incentive is becoming common practice among blood service organisations. Driven by self-orientated motives rather than pure philanthropic intentions, research is showing that people increasingly want something in return for their support. It is contended that individuals donate conspicuously with the hope it will improve their social standing. Yet there is limited evidence for the effectiveness of conspicuous recognition strategies, and no studies, to the researcher’s knowledge, that have examined conspicuous donation strategies in an online social media context. There is a need to understand what value drives individuals to donate blood, and whether conspicuous donation strategies are a source of such value post blood donation. The purpose of this paper is to conceptualise how conspicuous donation strategies, in the form of virtual badges on social media sites, can be applied to the social behaviour of blood donation, as a value-adding tool, to encourage repeat behaviour.

The ECOS Project. An interactive simulation to promote an ECO-friendly universe.

Custom designed for display on the Cube Installation situated in the new Science and Engineering Centre (SEC) at QUT, the ECOS project is a playful interface that uses real-time weather data to simulate how a five-star energy building operates in climates all over the world. In collaboration with the SEC building managers, the ECOS Project incorporates energy consumption and generation data of the building into an interactive simulation, which is both engaging to users and highly informative, and which invites play and reflection on the roles of green buildings. ECOS focuses on the principle that humans can have both a positive and negative impact on ecosystems with both local and global consequence. The ECOS project draws on the practice of Eco-Visualisation, a term used to encapsulate the important merging of environmental data visualization with the philosophy of sustainability. Holmes (2007) uses the term Eco-Visualisation (EV) to refer to data visualisations that ‘display the real time consumption statistics of key environmental resources for the goal of promoting ecological literacy’. EVs are commonly artifacts of interaction design, information design, interface design and industrial design, but are informed by various intellectual disciplines that have shared interests in sustainability. As a result of surveying a number of projects, Pierce, Odom and Blevis (2008) outline strategies for designing and evaluating effective EVs, including ‘connecting behavior to material impacts of consumption, encouraging playful engagement and exploration with energy, raising public awareness and facilitating discussion, and stimulating critical reflection.’ Consequently, Froehlich (2010) and his colleagues also use the term ‘Eco-feedback technology’ to describe the same field. ‘Green IT’ is another variation which Tomlinson (2010) describes as a ‘field at the juncture of two trends… the growing concern over environmental issues’ and ‘the use of digital tools and techniques for manipulating information.’ The ECOS Project team is guided by these principles, but more importantly, propose an example for how these principles may be achieved. The ECOS Project presents a simplified interface to the very complex domain of thermodynamic and climate modeling. From a mathematical perspective, the simulation can be divided into two models, which interact and compete for balance – the comfort of ECOS’ virtual denizens and the ecological and environmental health of the virtual world. The comfort model is based on the study of psychometrics, and specifically those relating to human comfort. This provides baseline micro-climatic values for what constitutes a comfortable working environment within the QUT SEC buildings. The difference between the ambient outside temperature (as determined by polling the Google Weather API for live weather data) and the internal thermostat of the building (as set by the user) allows us to estimate the energy required to either heat or cool the building. Once the energy requirements can be ascertained, this is then balanced with the ability of the building to produce enough power from green energy sources (solar, wind and gas) to cover its energy requirements. Calculating the relative amount of energy produced by wind and solar can be done by, in the case of solar for example, considering the size of panel and the amount of solar radiation it is receiving at any given time, which in turn can be estimated based on the temperature and conditions returned by the live weather API. Some of these variables can be altered by the user, allowing them to attempt to optimize the health of the building. The variables that can be changed are the budget allocated to green energy sources such as the Solar Panels, Wind Generator and the Air conditioning to control the internal building temperature. These variables influence the energy input and output variables, modeled on the real energy usage statistics drawn from the SEC data provided by the building managers.

Block models for improved earthwork allocation planning in linear infrastructure construction

Earthwork planning has been considered in this article and a generic block partitioning and modelling approach has been devised to provide strategic plans of various levels of detail. Conceptually this approach is more accurate and comprehensive than others, for instance those that are section based. In response to environmental concerns the metric for decision making was fuel consumption and emissions. Haulage distance and gradient are also included as they are important components of these metrics. Advantageously the fuel consumption metric is generic and captures the physical difficulties of travelling over inclines of different gradients, that is consistent across all hauling vehicles. For validation, the proposed models and techniques have been applied to a real world road project. The numerical investigations have demonstrated that the models can be solved with relatively little CPU time. The proposed block models also result in solutions of superior quality, i.e. they have reduced fuel consumption and cost. Furthermore the plans differ considerably from those based solely upon a distance based metric thus demonstrating a need for industry to reflect upon their current practices.

Emergency Health Services (EHS) : demand and service delivery models. monograph 3 : patients’ reasons and perceptions

Executive Summary Emergency health is a critical component of Australia’s health system and emergency departments (EDs) are increasingly congested from growing demand and blocked access to inpatient beds. The Emergency Health Services Queensland (EHSQ) study aims to identify the factors driving increased demand for emergency health and to evaluate strategies which may safely reduce the future demand growth. This monograph addresses the perspectives of users of both ambulance services and EDs. The research reported here aimed to identify the perspectives of users of emergency health services, both ambulance services and public hospital Emergency Departments and to identify the factors that they took into consideration when exercising their choice of location for acute health care. A cross-sectional survey design was used involving a survey of patients or their carers presenting to the EDs of a stratified sample of eight hospitals. A specific purpose questionnaire was developed based on a novel theoretical model which had been derived from analysis of the literature (Monograph 1). Two survey versions were developed: one for adult patients (self-complete); and one for children (to be completed by parents/guardians). The questionnaires measured perceptions of social support, health status, illness severity, self-efficacy; beliefs and attitudes towards ED and ambulance services; reasons for using these services, and actions taken prior to the service request. The survey was conducted at a stratified sample of eight hospitals representing major cities (four), inner regional (two) and outer regional and remote (two). Due to practical limitations, data were collected for ambulance and ED users within hospital EDs, while patients were waiting for or under treatment. A sample size quota was determined for each ED based on their 2009/10 presentation volumes. The data collection was conducted by four members of the research team and a group of eight interviewers between March and May 2011 (corresponding to autumn season). Of the total of 1608 patients in all eight emergency departments the interviewers were able to approach 1361 (85%) patients and seek their consent to participate in the study. In total, 911 valid surveys were available for analysis (response rate= 67%). These studies demonstrate that patients elected to attend hospital EDs in a considered fashion after weighing up alternatives and there is no evidence of deliberate or ill-informed misuse. • Patients attending ED have high levels of social support and self-efficacy that speak to the considered and purposeful nature of the exercise of choice. • About one third of patients have new conditions while two thirds have chronic illnesses • More than half the attendees (53.1%) had consulted a healthcare professional prior to making the decision. • The decision to seek urgent care at an ED was mostly constructed around the patient’s perception of the urgency and severity of their illness, reinforced by a strong perception that the hospital ED was the correct location for them (better specialised staff, better care for my condition, other options not as suitable). • 33% of the respondent held private hospital insurance but nevertheless attended a public hospital ED. Similarly patients exercised considered and rational judgements in their choice to seek help from the ambulance service. • The decision to call for ambulance assistance was based on a strong perception about the severity of the illness (too severe to use other means of transport) and that other options were not considered appropriate. • The decision also appeared influenced by a perception that the ambulance provided appropriate access to the ED which was considered most appropriate for their particular condition (too severe to go elsewhere, all facilities in one spot, better specialised and better care). • In 43.8% of cases a health care professional advised use of the ambulance. • Only a small number of people perceived that ambulance should be freely available regardless of severity or appropriateness. These findings confirm a growing understanding that the choice of professional emergency health care services is not made lightly but rather made by reasonable people exercising a judgement which is influenced by public awareness of the risks of acute health and which is most often informed by health professionals. It is also made on the basis of a rational weighing up of alternatives and a deliberate and considered choice to seek assistance from a service which the patient perceived was most appropriate to their needs at that time. These findings add weight to dispensing with public perceptions that ED and ambulance congestion is a result of inappropriate choice by patients. The challenge for health services is to better understand the patient’s needs and to design and validate services that meet those needs. The failure of our health system to do so should not be grounds for blaming the patient, claiming inappropriate patient choices.

Indexing and efficient instance-based retrieval of process models using untanglings

Process-Aware Information Systems (PAISs) support executions of operational processes that involve people, resources, and software applications on the basis of process models. Process models describe vast, often infinite, amounts of process instances, i.e., workflows supported by the systems. With the increasing adoption of PAISs, large process model repositories emerged in companies and public organizations. These repositories constitute significant information resources. Accurate and efficient retrieval of process models and/or process instances from such repositories is interesting for multiple reasons, e.g., searching for similar models/instances, filtering, reuse, standardization, process compliance checking, verification of formal properties, etc. This paper proposes a technique for indexing process models that relies on their alternative representations, called untanglings. We show the use of untanglings for retrieval of process models based on process instances that they specify via a solution to the total executability problem. Experiments with industrial process models testify that the proposed retrieval approach is up to three orders of magnitude faster than the state of the art.