Análise eletromiográfica dos músculos vasto medial e vasto lateral durante contrações isométricas de extensão do joelho

O joelho, por suas características anatômicas e freqüente instabilidade e exposição as lesões tem o quadríceps como importante músculo a ser desenvolvido quanto ao seu trofismo e força. Composto de quatro porções distintas estas podem gerar diferentes vetores de força que podem ter relações diretas com o recrutamento de unidades motoras. O posicionamento articular, a conseqüente modificação do comprimento muscular e a intensidade da contração podem influenciar o desenvolvimento da força do quadríceps. Dentre as contrações relacionadas ao maior recrutamento de unidades motoras com o intuito do desenvolvimento de força está a contração isométrica. Dentre as contrações musculares, as isométricas têm sido frequentemente indicadas para aumentar a força e estabilidade articular em sessões de treinamento e reabilitação. Pelo exposto, o objetivo do estudo foi analisar os músculos vasto medial (VM) e vasto lateral (VL) por meio da eletromiografia de superfície durante 15s de contração isométrica a 20%, 30%, 40% e 50% da contração isométrica voluntária máxima – CIVM com o joelho a 90 graus. Foram utilizados eletrodos de superfície bipolar de Ag/AgCl, posicionados nos músculos VM e VL, um módulo de aquisição de sinais biológicos (Lynx) calibrado com ganho de 1000vezes, filtro de passa alta de 20Hz e de passa baixa de 500Hz. Uma célula de carga foi acoplada perpendicularmente à cadeira de teste especialmente desenvolvida para o estudo e utilizado uma indicador digital para retorno visual. Na análise estatística utilizou-se teste de Friedman e teste de Wilcoxon, e adotou-se nível de significância de p<0,05. Verificou-se que os músculos VM e VL foram semelhantes entre si, e entre as cargas, houve diferença significante entre as cargas de 20% e 40%, 20% e 50%, e 30% e 50% para ambos os músculos, com maior atividade nas cargas de 40% e 50% CVM... (Resumo completo, clicar acesso eletrônico abaixo)

Mecanismos envolvendo receptores opióides μ do núcleo parabraquial lateral no controle da ingestão de água e sódio

No sistema nervoso central (SNC), mecanismos excitatórios e inibitórios atuam para controlar a ingestão de água e sódio. Importantes mecanismos inibitórios da ingestão de água e sódio foram recentemente descobertos no núcleo parabraquial lateral (NPBL). Um papel importante do NPBL seria integrar as informações ascendentes da porção medial do núcleo do trato solitário (NTSm) e da área postrema (AP) que por sua vez poderiam influenciar a atividade das áreas prosencefálicas envolvidas no controle do balanço hidroeletrolítico, como núcleos específicos do hipotálamo e amígdala. Estudos prévios sugerem a presença de um importante mecanismo serotonérgico inibitório da ingestão de água e sódio no NPBL. Além do mecanismo serotonérgico também já foi demonstrado no NPBL a existência de um mecanismo colecistocinérgico que também exerce um papel inibitório sobre a ingestão de água e sódio. Em um estudo anterior em que se injetou um agonista e um antagonista inespecíficos de receptores opióides (β-endorfina e naloxona, respectivamente) no NPBL foi demonstrado que mecanismos opióides no NPBL podem modular o mecanismo inibitório da ingestão de água e sódio, porém não se sabia qual ou quais dos três subtipos de receptores opióides (μ, δ ou κ) estariam envolvidos nesse mecanismo... (Resumo completo, clicar acesso eletrônico abaixo)

Caracterização dos receptores opióides do núcleo parabraquial lateral envolvidos no controle da ingestão de água e sódio

Nosso organismo constantemente perde água e eletrólitos para o meio ambiente, principalmente pela excreção urinária.Porém, a osmolaridade e o volume de líquidos do organismo devem permanecer dentro de uma pequena faixa de variação para que nossas células funcionem perfeitamente e haja manutenção da pressão arterial. A regulação da osmolaridade e do volume dos líquidos corporais exige que a entrada de água e eletrólitos seja igual à perda pelo corpo e, para tanto, a regulação envolve a ação integrada dos rins e do comportamento de ingestão de água e sódio que é o principal íon extracelular. A ingestão de água e sódio é regulada por mecanismos centrais excitatórios e inibitórios. Os mecanismos excitatórios que desencadeiam a ingestão de água e sódio são ativados principalmente pelo peptídeo angiotensina II (ANG II), cuja produção apresenta-se aumentada em situações de hipovolemia e hipotensão. Por outro lado, destacam-se importantes mecanismos inibitórios da ingestão de água e sódio descobertos recentemente no núcleo parabraquial lateral (NPBL). O NPBL é uma estrutura pontina que recebe projeções aferentes da área postrema (AP) e da porção medial do núcleo do trato solitário (NTSm) e que faz conexões com áreas prosencefálicas envolvidas no controle do balanço hidroeletrolítico. Estudos prévios mostraram que injeções bilaterais do agonista opióide inespecífico β-endorfina no NPBL induziram ingestão de água e sódio em ratos saciados e aumentaram a ingestão de água e sódio induzida pelo tratamento com o diurético furosemida (FURO) combinado com baixas doses do bloqueador da enzima conversora de angiotensina captopril (CAP) injetados subcutaneamente (sc)... (Resumo completo, clicar acesso eletrônico abaixo)

Análise dos efeitos das deformações estruturais sobre a transferência transversal de carga em um veículo do tipo fórmula SAE submetido a uma aceleração lateral constante

This paper studies the frame deformations on a formula SAE vehicle in steady-state cornering and its influence on the lateral load transfers and, consequently, on the tires normal loads due to the applied lateral load. For a vehicle with a perfect rigid frame, the vehicle mass, the position of the center of gravity and the suspensions are the only factors responsible for the load distribution between the tires. When the frame deformations are no longer negligible, the frame deformations affect the loaddistribution between the tires. The frame flexibility turns it able to behave as an additional set of springs to the suspension system, thus changing the behavior of the set. This paper describes howit happens and suggests ways to minimize this phenomenon

Avaliação das doses de cães submetidos a exames radiográficos de pulmão

This study aims to determine surface skin doses in dogs (with suspected pulmonary metastasis) submitted to chest X-rays using the technique of thermoluminescence dosimetry. Twenty seven exams from different dogs were performed at the Faculdade de Medicina Veterinária e Zootecnia da Universidade Estadual Paulista (FMVZ-UNESP/Botucatu). The doses were evaluated using thermoluminescent dosimeters of calcium sulphate doped with dysprosium (CaSO4:Dy) produced by the Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN). The pulmonary metastasis exams are carried out in three projections, one dorsal-ventral and two lateral-lateral. During the procedures the projection thicknesses and source-skin surface distances were registered. To simulate the dog phantom the dosimeters were positioned in a cubic simulator (30x30x30 cm) of polymethylmethacrylate (PMMA) filled with water and irradiated according to the parameters of projections with the X-ray energies ranging from 45 to 70 kV. To estimate the surface skin dose the dose-response curves were obtained for X-ray energies of 50 and 70 kV using the diagnostic X-ray beam machine of the Instruments Calibration Laboratory of IPEN for doses of 1.5, 2.0, 2.5, 3.5 and 4.0 mGy. The main difficulty of this work was the dog immobilization that is reflected in poor-quality diagnostic imaging and, consequently, demands the repetition of the exams, which contributes to the increase of the doses received by the animals being studied and the clinical staff. The doses evaluated in this type of procedure are between 0.43 and 4.22 mGy. This research has shown to be extremely important for the assessment of doses involved in veterinary diagnostic radiology procedures, and as a parameter in the individual monitoring of pet’s owners who assist the animal positioning and occupationally exposed workers of the Department of Veterinary Radiology

Digital radiography for determination of primary tooth length: in vivo and ex vivo studies

Background. Methods for determining the root canal length of the primary tooth should yield accurate and reproducible results. In vitro studies show some limitations, which do not allow their findings to be directly transferred to a clinical situation. Aim. To compare the accuracy of radiographic tooth length obtained from in vivo digital radiograph with that obtained from ex vivo digital radiograph. Method. Direct digital radiographs of 20 upper primary incisors were performed in teeth (2/3 radicular resorption) that were radiographed by an intraoral sensor, according to the long-cone technique. Teeth were extracted, measured, and mounted in a resin block, and then radiographic template was used to standardise the sensor-target distance (30 cm). The apparent tooth length (APTL) was obtained from the computer screen by means of an electronic ruler accompanying the digital radiography software (CDR 2.0), whereas the actual tooth length (ACTL) was obtained by means of a digital calliper following extraction. Data were compared to the ACTL by variance analysis and Pearson’s correlation test. Results. The values for APTL obtained from in vivo radiography were slightly underestimated, whereas those values obtained from ex vivo were slightly overestimated. No significance was observed between APTL and ACTL. Conclusion. The length of primary teeth estimated by in vivo and ex vivo comparisons using digital radiography was found to be similar to the actual tooth length.

Maxillary molar intrusion with zygomatic anchorage in open bite treatment: lateral and oblique cephalometric evaluation

Purpose We aimed to use lateral and oblique radiographs to evaluate dental and skeletal changes arising from maxillary molar intrusion with zygomatic anchorage in open bite patients. Methods We conducted a pilot study including nine patients (six females and three males; mean age, 18.7±5.1 years) with skeletal open bite treated with titanium miniplates for posterior dentoalveolar intrusion. Lateral and oblique (right and left, 45°) radiographs were obtained before (T1) and 6 months after intrusion (T2). A paired t test was used for statistical evaluation. Results The maxillary posterior teeth were intruded 2.03± 0.87 mm (p<0.01) with 450×g of force, which resulted in counterclockwise rotation of the mandible (1.57°, p=0.02) and clockwise rotation of the occlusal plane (4.27±2.66°, p=0.01). Anterior facial height decreased by a mean of 1.79±1.51 mm (p<0.01). No significant change in the palatal plane or in anteroposterior molar movement was observed. Conclusion The oblique radiograph at 45° was useful for the assessment of molar intrusion and anteroposterior displacement. The treatment of anterior open bite with skeletal anchorage provided intrusion of molars and counterclockwise rotation of the mandible, resulting in open bite closure.

Tratamento ortodôntico da agenesia de incisivo lateral superior com envolvimento de fratura radicular de incisivo central superior

Patients with agenesis of maxillary lateral incisor must have in your planning functional and aesthetic considerations, important to the success of the treatment, regardless of whether the choice of treatment is closing or opening and maintenance of space for rehabilitation with prosthesis. This choice will depend on factors such as skeletal and tooth structure and profile. Children and adolescents are the group of individuals most exposed to trauma and fracture of the maxillary lateral incisor due to the activities they perform. Proper diagnosis and good treatment are essential to the success of the treatment. This article aims to report a case of agenesis of the maxillary lateral incisor along with the involvement of a root fracture of the maxillary central incisor. The orthodontic treatment was successfully finished with a favorable prognosis for the fractured incisor to stay in a esthetic and functional position.

Gabaergic and opioid receptors mediate the facilitation of NaCl intake induced by α₂-adrenergic activation in the lateral parabrachial nucleus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Moxonidine into the lateral parabrachial nucleus modifies postingestive signals involved in sodium intake control

The activation of a2-adrenoceptors with bilateral injections of moxonidine (a2-adrenoceptor and imidazoline receptor agonist) into the lateral parabrachial nucleus (LPBN) increases 1.8% NaCl intake induced by treatment with furosemide (FURO) + captopril (CAP) subcutaneously. In the present study, we analyzed licking microstructure during water and 1.8% NaCl intake to investigate the changes in orosensory and postingestive signals produced by moxonidine injected into the LPBN. Male Sprague–Dawley rats were treated with FURO + CAP combined with bilateral injections of vehicle or moxonidine (0.5 nmol/0.2 ll) into the LPBN. Bilateral injections of moxonidine into the LPBN increased FURO + CAP-induced 1.8% NaCl intake, without changing water intake. Microstructural analysis of licking behavior found that this increase in NaCl intake was a function of increased number of licking bursts from 15 to 75 min of the test (maximum of 49 ± 9 bursts/bin, vs. vehicle: 2 ± 2 bursts/bin). Analysis of the first 15 min of the test, when most of the licking behavior occurred, found no effect of moxonidine on the number of licks/burst for sodium intake (24 ± 5 licks/burst, vs. vehicle: 27 ± 8 licks/burst). This finding suggests that activation of a2-adrenoceptors in the LPBN affects postingestive signals that are important to inhibit and limit sodium intake by FURO + CAP-treated rats.

Sodium intake combining cholinergic activation and noradrenaline into the lateral parabrachial nucleus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Incomplete vertical root fracture associated with lateral compaction technique: a microscopic analysis

Objective: This study evaluated the effects of root canal obturation employing lateral compaction technique and spreader load of 1.5 kg on the incidence of complete (CVRF) or incomplete vertical root fractures (IVRF). Material and Methods: Twenty-seven distal roots of extracted human mandibular molars were used. All root canals were prepared by biomechanical step-back technique and obturated by lateral compaction technique. The prepared roots were distributed into two groups: G1- experimental (n = 17) and G2- control (n = 10). During obturation, load of 1.5 kg was applied to a size # 30 finger spreader. Pre- and post-obturation images of the coronal portion of the roots were captured by inverted digital microscopy and analyzed by one trained examiner. Data were evaluated by Fisher’s test (p < 0.05) using GrapH Pad Prism 5.0. Results: No roots exhibited CVRF. All fractures observed before and after obturation were IVRF or “other defects”. In G2 (control group), there was no increase of IVRF number. Interestingly, G1 presented an increase in the IVRF number to 70.59% in the 12 teeth out of 17 teeth studied. The statistical analysis showed that the mean of IVRF increased significantly in G1 when compared to G2 (p < 0.05). Conclusion: The application of a 1.5 kg spreader load during lateral compaction technique does not produce complete vertical root fractures, but may produce incomplete fractures or “other defects”.

Influence of spacing in the upper lateral incisor area on the perception of smile esthetics among orthodontists and laypersons

Background: The aim of this study was to determine the perception of smile esthetics among orthodontists and laypeople with respect to the presence of diastemas in the upper lateral incisor in the mesial, distal, and both surfaces using an oblique smile analysis. Methods: Two standardized oblique photos of pleasant smiles from two white women were selected. Images were digitally altered to create diastemas in the lateral incisor, in 0.5-mm increments, in the mesial, distal, or both surfaces. Final images were randomly assembled in a photo album, which was given to 120 judgesd60 orthodontists and 60 laypersons. Each rater was asked to evaluate the attractiveness of the images on a visual analog scale. The data collected were submitted to statistical analysis by the means of one-way ANOVA with the Tukey post hoc test and the unpaired Student’s t test. Results: The most attractive smile was the one without spacing, and the presence of diastemas was considered unattractive by both groups of raters, following a pattern: the greater and the more mesially located, the more unattractive was the smile. Conclusions: The results of this study suggest that diastemas in the upper lateral incisor area were considered unattractive, following a pattern: the greater and the more mesially located, the more unattractive was the smile.

Influence of the gutta-percha taper and finger spreader on lateral consensation effectiveness

Introduction: Lateral condensation effectiveness may be influenced by the gutta-percha and finger spreader taper used during root canal obturation. Objective: To evaluate the penetration ability of finger spreader into simulated root canals prepared using MTwo rotary system and filled with different gutta-percha and finger spreader tapers. Material and methods: Resin blocks with curved root canals had the apical diameter enlarged up to #25.06 and distributed into groups (n = 6) according to the gutta-percha taper (#25.02, #25.04, and #25.06) and the finger spreader (#30 and #35 NiTi, and stainless steel B) used to perform cold lateral condensation. After applying a load of 1.5 Kg over the finger spreaders’ head, the distance between the finger spread tip and the apical limit of the root canal preparation were obtained. The data were submitted to Anova and Tukey-Krammer’s test, with 5% of significance. Results: The gutta-percha cones with 0.02 taper enabled higher finger spreader penetration when compared to 0.04 and 0.06 tapers (p < 0.05), which were similar between each other (p > 0.05), regardless of the type and diameter of the finger spreader used. When different finger spreaders were compared among themselves, stainless steel B showed higher penetration ability (p < 0.05). Conclusion: It was concluded that the stainless-steel finger spreaders showed superior penetration ability and gutta-percha with lower tapers enabled a more effective lateral condensation at the apical third.