Ionic-covalent transition in titanium oxides

The nature of the chemical bond in three titanium oxides of different crystal structure and different formal oxidation state has been studied by means of the ab initio cluster-model approach. The covalent and ionic contributions to the bond have been measured from different theoretical techniques. All the analysis is consistent with an increasing of covalence in the TiO, Ti2O3, and TiO2 series as expected from chemical intuition. Moreover, the use of the ab initio cluster-model approach combined with different theoretical techniques has permitted us to quantify the degree of ionic character, showing that while TiO can approximately be described as an ionic compound, TiO2 is better viewed as a rather covalent oxide.

High-momentum proton removal from 16 O and the (e,e'p) cross section

The cross section for the removal of high-momentum protons from 16O is calculated for high missing energies. The admixture of high-momentum nucleons in the 16O ground state is obtained by calculating the single-hole spectral function directly in the finite nucleus with the inclusion of short-range and tensor correlations induced by a realistic meson-exchange interaction. The presence of high-momentum nucleons in the transition to final states in 15N at 60¿100 MeV missing energy is converted to the coincidence cross section for the (e,e¿p) reaction by including the coupling to the electromagnetic probe and the final state interactions of the outgoing proton in the same way as in the standard analysis of the experimental data. Detectable cross sections for the removal of a single proton at these high missing energies are obtained which are considerably larger at higher missing momentum than the corresponding cross sections for the p-wave quasihole transitions. Cross sections for these quasihole transitions are compared with the most recent experimental data available.

Crystal Structures and Spectral Aspects of Mixed Ligand Transition Metal Chelates Derived from Aldehyde based ONS Donor Thiosemicarbazones

Thiosemicarbazones have emerged as an important class of ligands over a period of time, for a variety of reasons, such as variable donor properties, structural diversity and biological applications. Interesting as the coordination chemistry may be, the driving force for the study of these ligands has undoubtedly been their biological properties and the majority of the 3000 or so publications on thiosemicarbazones since 2000 have alluded to this feature. Thiosemicarbazones with potential donor atoms in their structural skeleton fascinate coordination chemists with their versatile chelating behavior. The thiosemicarbazones of aromatic aldehydes and ketones form stable chelates with transition metal cations by utilizing both their sulfur and azomethine nitrogen as donor atoms. They have been shown to possess a diverse range of biological activities including anticancer, antitumor, antibacterial, antiviral, antimalarial and antifungal properties owing to their ability to diffuse through the semipermeable membrane of the cell lines. The enhanced effect may be attributed to the increased lipophilicity of the metal complexes compared to the ligand alone.

Studies On Some New Transition Metai. Complexes Of The Schiff Bases Derived From Ouinoxaline - 2 - Carboxaldehyde

This thesis deals with the synthesis, characterisation and catalytic activity studies of some new transition metal complexes of the Schiff bases, derived from quinoxaline—2—carboxaldehyde. The model complexes derived from specially designed and synthesised Schiff bases help us to understand the chemistry of biological systems. Schiff bases derived from heterocyclic aldehydes like quinoxaline-2-carboxaldehyde provide great structural diversity during complexation. The Schiff bases synthesised in the present study ' are quinoxaline—2—carboxa.lidene-2-aminophenol (QAP). quinoxaline—2carboxaldehyde semicarbazone (QSC), quinoxaline-2—carboxalidene—o— phenylenediamine (QOD) and quinoxaline-2-carboxalidene-2-furfurylamine (QFA). The elucidation of the structure of these complexes is done using conductance, magnetic susceptibility measurements. infrared, UV—Vis and EPR spectral studies.

Mono- and binuclear transition metal complexes of n(4)-substituted thiosel\licarbazones derived frol\i salicylaldehyde and 2-hydroxyacetophenone synthesis, spectral and structural studies

The work embodied in the thesis is divided into eight chapters. Chapter I gives a brief introduction about metal complexes of thiosemicarbazones, including their structural and bonding properties. Chapter 2 deals with the synthesis and single crystal X-ray diffraction studies of various thiosemicarbazones used up for the present investigations and various characterization techniques. Chapter 3 deals with synthesis, spectral and structural studies of Cu(U) complexes with ONS donor thiosemicarbazones. Chapter 4 deals with synthesis and spectral studies of Ni(II) complexes \vith 2-hydroxyacetophenone N(4)-cyclohexyl thiosemicarbazone as the ligand. Chapter 5 includes synthesis and spectral studies of Mn(II) complexes. Chapter 6 deals with synthesis, spectral and structural studies of Zn(II) complexes. Chapter 7 includes synthesis and spectral studies of oxovanadium(IV) complexes. Chapter 8 deals with synthesis, spectral and single crystal X-ray diffraction studies of dioxomolybdenum(VI) complexes.

“Catalysis by Nanocrystalline Ceria Modified with Transition Metals”

The objective of the present work is to improve the textural and structural properties of cerium oxide by the incorporation of transition metals as well as sulphate ions. We have incorporated tungsten, molybdenum and chromium oxide into pure as well as sulphated cerium oxide and the catalytic systems thus prepared were characterised using various techniques. lndustrially important reactions such as acetalization and deacetalization, oxidative dehydrogenation of ethylbenzene, MTBE synthesis and Beckmann rearrangement of cinnamaldoxime and salicylaldoxime have been selected for the measurement of the catalytic activity of the systems. The work is presented in eight chapters

"Catalysis by pillared montmorillonites exchanged with transition metals"

The present work is oriented to obtain a comparative evaluation of the physicochemical properties and catalytic activities of iron, aluminium and iron aluminium mixed pillared montmorillonites and their transition metal exchanged analogues. Reactions of industrial importance like Friedel Crafts alkylations, catalytic wet peroxide oxidation of phenol and MTBE synthesis have been selected for the present study. The thesis is structured into seven chapters. First chapter deals with a brief introduction and literature survey on pillared clays. Second chapter explains the materials and methods employed in the work. Results and discussions on the characterisation techniques are described in the third chapter. The subsequent three chapters describe the catalytic activities of pillared clays in the industrially important reactions. Last chapter comprises the summary of the investigations and the conclusions drawn from the earlier chapters

‘‘catalysis by nano sulfated titania modified by transition metals"

in the present study, we have prepared and evaluated the physical and chemical properties and catalytic activities of transition metal loaded sulfated titania via the sol-gel route. Sol-gel method is widely used for preparing porous materials having controlled properties and leads to the formation of oxide particles in nano range, which are spherical or interconnected to each other. Characterization using various physico-chemical techniques and a detailed study of acidic properties are also carried out. Some reactions of industrial importance such as Friedel-Crafts reaction, fen-butylation of phenol,Beckmann rearrangement of cyclohexanone oxime, nitration of phenol and photochemical degradation of methylene blue have been selected for catalytic activity study in the present venture. The work is organized into eight chapters

Unusual surface and edge morphologies, sp2 to sp3 hybridized transformation and electronic damage after Ar+ ion irradiation of few-layer graphene surfaces

Roughness and defects induced on few-layer graphene (FLG) irradiated by Ar+ ions at different energies were investigated using X-ray photoemission spectroscopy (XPS) and atomic force microscopy techniques. The results provide direct experimental evidence of ripple formation, sp2 to sp3 hybridized carbon transformation, electronic damage, Ar+ implantation, unusual defects and edge reconstructions in FLG, which depend on the irradiation energy. In addition, shadowing effects similar to those found in oblique-angle growth of thin films were seen. Reliable quantification of the transition from the sp2-bonding to sp3-hybridized state as a result of Ar+ ion irradiation is achieved from the deconvolution of the XPS C (1s) peak. Although the ion irradiation effect is demonstrated through the shape of the derivative of the Auger transition C KVV spectra, we show that the D parameter values obtained from these spectra which are normally used in the literature fail to account for the sp2 to sp3 hybridization transition. In contrast to what is known, it is revealed that using ion irradiation at large FLG sample tilt angles can lead to edge reconstructions. Furthermore, FLG irradiation by low energy of 0.25 keV can be a plausible way of peeling graphene layers without the need of Joule heating reported previously

Synthesis and characterization of 3d-transition metals doped ZnO thin films and nanostructures for possible spintronic applications

The objective of the present study is the formation of single phase Zn1−xTMxO thin films by PLD and increase the solubility limit of TM dopants. The TM doped ZnO nanostructures were also grown by hydrothermal method. The structural and morphological variation of ZnO:TM thin films and nanostructures with TM doping concentration is also investigated. The origin and enhancement of ferromagnetism in single phase Zn1−xTMxO thin films and nanostructures using spectroscopic techniques were also studied. The dependence of ablation parameters on the structural and optical properties of ZnO thin films were studied

Studies on Transition Metal Chelates of some Tridentate Aroylhydrazones

The ability of aroylhydrazones to bind with transition metals is a developing area of research interest and the coordinating properties of hydrazones can be tuned by the appropriate choice of parent aldehyde or ketone and the hydrazide. So in the present work we selected four different aroylhydrazones as principal ligands. Introduction of heterocyclic bases like 1,10-phenanthroline, 2,2′-bipyridine, 3-picoline and pyridine leads to the syntheses of mixed ligand metal chelates which can cause different bonding modes, spectral properties and geometries in coordination compounds. The importance of aroylhydrazones and their complexes in various fields and their interesting coordinating properties stimulate our interest in the investigation of transition metal chelates with four different aroylhydrazones. The aroylhydrazones selected are 4-benzyloxy-2-hydroxybenzaldehyde-4-nitrobenzoylhydrazone dimethylformamide monosolvate, 5-bromo-2-hydroxy-3-methoxybenzaldehyde nicotinoylhydrazone dihydrate methanol monosolvate, 4-diethylamino-2- hydroxybenzaldehyde nicotinoylhydrazone monohydrate and 2-benzoylpyridine- 4-nitrobenzoylhydrazone. The selection of 4-benzyloxy-2-hydroxybenzaldehyde- 4-nitrobenzoylhydrazone was based on the idea of developing ligands having D-π-A general structure, so that the proligand and metal complexes exhibit NLO activity. Hence it is interesting to explore the coordinating capabilities of the synthesized hydrazones and to study the NLO activity of hydrazones and some of the metal complexes.

Innovation and Globalization Policy in Small Transition Countries ; Case study: Macedonia and Slovenia

Diese Arbeit befasst sich mit der Innovations- und Globalisierungspolitik in kleinen Transformationsländern am Beispiel Mazedoniens; diese wurde mit der Lage in Slowenien verglichen, einem Land von ungefähr gleicher Größe und mit gemeinsamer Vergangenheit als Teilrepublik der Jugoslawischen Föderation, aber mit einem wesentlich höheren ökonomischen Entwicklungsstand. Innovation wird dabei verstanden als „Herstellung, Anpassung und Ausnutzung von Neuerungen“, und sie wird durch das Umfeld, in dem sie stattfindet, beeinflusst. Anpassung und Ausnutzung sind gerade für kleine Transformationsländer von erheblicher Bedeutung, da ihre Fähigkeit zu Herstellung von Neuerungen sehr begrenzt sind. Die Rolle der Innovationspolitik besteht hierbei darin, institutionelle und organisationelle Regulierungen einzuführen, die ein günstiges Umfeld sowohl für Innovationen als auch für die Entwicklung eines nationalen Innovationssystems schaffen. Die Rolle der Politik besteht also nicht in der Innovation als solcher, sondern in der Herstellung der notwendigen Bedingungen für die Industrie und die Forschungseinrichtungen dahingehend zu schaffen, dass sie ihr Wissen, ihre Fertigkeiten und ihre praktischen Erfahrungen für innovative Tätigkeiten einsetzen können. Auf der einen Seite gibt es Institutionen und Organisationen, ohne die die Unternehmen rückständig und wenig leistungsstark wären (etwa das Patentamt oder Institutionen höherer Bildung), und auf der anderen Seite gibt es Institutionen und Organisationen, welche die Unternehmen dabei unterstützen, dass sie ihre Tätigkeit weiter unterstützen (z.B. durch Technologietransfer-Zentren und Netzwerke). Die Leistungen dieser Institutionen und Organisationen sind von großer Bedeutung für die nationalen Innovationssysteme und sollten ihrerseits durch Innovationspolitik unterstützt werden; dies bedeutet jedoch nicht, dass diese Leistungen vom Staat bereitgestellt werden, vielmehr sollte die Wirtschaftspolitik Möglichkeiten für die öffentlich/private oder sogar rein private Bereitstellung solcher Leistungen in Erwägung ziehen; dies würde nicht nur die Kosten für den Staat senken, sondern auch die Effizienz bei der Erstellung dieser Leistungen steigern. Die Arbeit kommt zu dem Schluss, dass das größte Problem der Innovationspolitik in Mazedonien darin besteht, dass es sie gar nicht gibt, und zwar nicht als Folge einer bewussten Entscheidung darüber. Tatsächlich müssen Ressourcen und Zeit für die Schaffung eines nationalen Innovationssystems eingesetzt werden mit Hilfe einer Politik, die sich auf die wesentlichen Umrisse konzentriert, wobei die Nachfrage nach Technologie im Unternehmensbereich gesteigert wird und das Wissen und das Informationsangebot restrukturiert wird. Dieses System muss offen sein, unter beständigem Verbesserungsdruck stehen und fähig sein, sich an Veränderungen anzupassen. Damit eine solche Politik erfolgreich ist, muss es einen Konsens darüber zwischen allen beteiligten Akteuren geben und darüber hinaus auch eine Kohärenz zwischen den verschiedenen politischen Institutionen. Das ist deswegen wichtig, weil der Innovationsprozess komplex ist und verschiedene Politikbereiche berührt. Ziel sollte die Schaffung eines Systems sein, das einerseits auf Autonomie und Kooperation aufbaut, andererseits aber auch Wettbewerb zwischen den beteiligten Institutionen und Organisationen fördert. Eine wichtige Bedingung für ein positives Investitionsklima im Bereich der Innovation ist die Erreichung von makroökonomischer Stabilität. Die gegenwärtige Situation ist gekennzeichnet durch Instabilität des Rechtswesens, durch Korruption und Probleme des Vertragsschutzes, die sowohl ausländische als auch inländische Akteure davon abhält, sich in wirtschaftlichen Aktivitäten in Mazedonien zu engagieren. Bei der Suche nach einem Ausweg aus diesen Problemen ist es wichtig für Mazedonien, von anderen Ländern wie Slowenien zu lernen, die ähnliche Probleme haben, aber auch schon Erfahrungen in der Problemlösung. Man muss dabei beachten, dass der Entwicklungsstand, das wirtschaftliche und das politische Umfeld in beiden Vergleichsländern sich erheblich unterscheiden, so dass die Lektionen, die Mazedonien von Slowenien lernen könnte, nicht direkt übertragen und kopiert werden können, sondern entsprechend angepasst werden müssen. Die vorliegende Arbeit liefert Einsichten in die Probleme der Innovationspolitik in Transformationsländern und liefert daher sowohl einen Anreiz als auch eine Quelle von Informationen für künftige Analysen der wirtschaftlichen Bedingungen und vor allem Innovationspolitik in Transformationsländern.

Calculation of the electronic properties of neutral and ionized divalent-metal clusters

The electronic properties of neutral and ionized divalent-metal clusters have been studied using a microscopic theory, which takes into account the interplay between van der Waals (vdW) and covalent bonding in the neutral clusters, and the competition between hole delocalization and polarization energy in the ionized clusters. By calculating the ground-state energies of neutral and ionized. Hg_n clusters, we determine the size dependence of the bond character and the ionization potential I_p(n). For neutral Hg_n clusters we obtain a transition from van del Waals to covalent behaviour at the critical size n_c ~ 10-20 atoms. Results for I_p(Hg_n) with n \le 20 are in good agreement with experiments, and suggest that small Hg_n^+ clusters can be viewed as consisting of a positive trimer core Hg_3^+ surrounded by n - 3 polarized neutral atoms.

On the transition from localized to delocalized electronic states in divalent-metal clusters

The transition from van der Waals to covalent bonding, which is expected to occur in divalent-metal clusters with increasing cluster size, is discussed. We propose a model which takes into account, within the same electronic theory, the three main competing contributions, namely the kinetic energy of the electrons, the Coulomb interactions between electrons, and the s \gdw p intraatomic transitions responsible for van der Waals like bonding. The model is solved by taking into account electron correlations using a generalized Gutzwiller approximation (slave boson method). The occurrence of electron localization is studied as a function of the interaction parameters and cluster size.