Synthesis, Characterization and Applications of Modified TiO2 Systems

This thesis is divided in to 9 chapters and deals with the modification of TiO2 for various applications include photocatalysis, thermal reaction, photovoltaics and non-linear optics. Chapter 1 involves a brief introduction of the topic of study. An introduction to the applications of modified titania systems in various fields are discussed concisely. Scope and objectives of the present work are also discussed in this chapter. Chapter 2 explains the strategy adopted for the synthesis of metal, nonmetal co-doped TiO2 systems. Hydrothermal technique was employed for the preparation of the co-doped TiO2 system, where Ti[OCH(CH3)2]4, urea and metal nitrates were used as the sources for TiO2, N and metals respectively. In all the co-doped systems, urea to Ti[OCH(CH3)2]4 was taken in a 1:1 molar ratio and varied the concentration of metals. Five different co-doped catalytic systems and for each catalysts, three versions were prepared by varying the concentration of metals. A brief explanation of physico-chemical techniques used for the characterization of the material was also presented in this chapter. This includes X-ray Diffraction (XRD), Raman Spectroscopy, FTIR analysis, Thermo Gravimetric Analysis, Energy Dispersive X-ray Analysis (EDX), Scanning Electron Microscopy(SEM), UV-Visible Diffuse Reflectance Spectroscopy (UV-Vis DRS), Transmission Electron Microscopy (TEM), BET Surface Area Measurements and X-ray Photoelectron Spectroscopy (XPS). Chapter 3 contains the results and discussion of characterization techniques used for analyzing the prepared systems. Characterization is an inevitable part of materials research. Determination of physico-chemical properties of the prepared materials using suitable characterization techniques is very crucial to find its exact field of application. It is clear from the XRD pattern that photocatalytically active anatase phase dominates in the calcined samples with peaks at 2θ values around 25.4°, 38°, 48.1°, 55.2° and 62.7° corresponding to (101), (004), (200), (211) and (204) crystal planes (JCPDS 21-1272) respectively. But in the case of Pr-N-Ti sample, a new peak was observed at 2θ = 30.8° corresponding to the (121) plane of the polymorph brookite. There are no visible peaks corresponding to dopants, which may be due to their low concentration or it is an indication of the better dispersion of impurities in the TiO2. Crystallite size of the sample was calculated from Scherrer equation byusing full width at half maximum (FWHM) of the (101) peak of the anatase phase. Crystallite size of all the co-doped TiO2 was found to be lower than that of bare TiO2 which indicates that the doping of metal ions having higher ionic radius into the lattice of TiO2 causes some lattice distortion which suppress the growth of TiO2 nanoparticles. The structural identity of the prepared system obtained from XRD pattern is further confirmed by Raman spectra measurements. Anatase has six Raman active modes. Band gap of the co-doped system was calculated using Kubelka-Munk equation and that was found to be lower than pure TiO2. Stability of the prepared systems was understood from thermo gravimetric analysis. FT-IR was performed to understand the functional groups as well as to study the surface changes occurred during modification. EDX was used to determine the impurities present in the system. The EDX spectra of all the co-doped samples show signals directly related to the dopants. Spectra of all the co-doped systems contain O and Ti as the main components with low concentrations of doped elements. Morphologies of the prepared systems were obtained from SEM and TEM analysis. Average particle size of the systems was drawn from histogram data. Electronic structures of the samples were identified perfectly from XPS measurements. Chapter 4 describes the photocatalytic degradation of herbicides Atrazine and Metolachlor using metal, non-metal co-doped titania systems. The percentage of degradation was analyzed by HPLC technique. Parameters such as effect of different catalysts, effect of time, effect of catalysts amount and reusability studies were discussed. Chapter 5 deals with the photo-oxidation of some anthracene derivatives by co-doped catalytic systems. These anthracene derivatives come underthe category of polycyclic aromatic hydrocarbons (PAH). Due to the presence of stable benzene rings, most of the PAH show strong inhibition towards biological degradation and the common methods employed for their removal. According to environmental protection agency, most of the PAH are highly toxic in nature. TiO2 photochemistry has been extensively investigated as a method for the catalytic conversion of such organic compounds, highlighting the potential of thereof in the green chemistry. There are actually two methods for the removal of pollutants from the ecosystem. Complete mineralization is the one way to remove pollutants. Conversion of toxic compounds to another compound having toxicity less than the initial starting compound is the second way. Here in this chapter, we are concentrating on the second aspect. The catalysts used were Gd(1wt%)-N-Ti, Pd(1wt%)-N-Ti and Ag(1wt%)-N-Ti. Here we were very successfully converted all the PAH to anthraquinone, a compound having diverse applications in industrial as well as medical fields. Substitution of 10th position of desired PAH by phenyl ring reduces the feasibility of photo reaction and produced 9-hydroxy 9-phenyl anthrone (9H9PA) as an intermediate species. The products were separated and purified by column chromatography using 70:30 hexane/DCM mixtures as the mobile phase and the resultant products were characterized thoroughly by 1H NMR, IR spectroscopy and GCMS analysis. Chapter 6 elucidates the heterogeneous Suzuki coupling reaction by Cu/Pd bimetallic supported on TiO2. Sol-Gel followed by impregnation method was adopted for the synthesis of Cu/Pd-TiO2. The prepared system was characterized by XRD, TG-DTG, SEM, EDX, BET Surface area and XPS. The product was separated and purified by column chromatography using hexane as the mobile phase. Maximum isolated yield of biphenyl of around72% was obtained in DMF using Cu(2wt%)-Pd(4wt%)-Ti as the catalyst. In this reaction, effective solvent, base and catalyst were found to be DMF, K2CO3 and Cu(2wt%)-Pd(4wt%)-Ti respectively. Chapter 7 gives an idea about the photovoltaic (PV) applications of TiO2 based thin films. Due to energy crisis, the whole world is looking for a new sustainable energy source. Harnessing solar energy is one of the most promising ways to tackle this issue. The present dominant photovoltaic (PV) technologies are based on inorganic materials. But the high material, low power conversion efficiency and manufacturing cost limits its popularization. A lot of research has been conducted towards the development of low-cost PV technologies, of which organic photovoltaic (OPV) devices are one of the promising. Here two TiO2 thin films having different thickness were prepared by spin coating technique. The prepared films were characterized by XRD, AFM and conductivity measurements. The thickness of the films was measured by Stylus Profiler. This chapter mainly concentrated on the fabrication of an inverted hetero junction solar cell using conducting polymer MEH-PPV as photo active layer. Here TiO2 was used as the electron transport layer. Thin films of MEH-PPV were also prepared using spin coating technique. Two fullerene derivatives such as PCBM and ICBA were introduced into the device in order to improve the power conversion efficiency. Effective charge transfer between the conducting polymer and ICBA were understood from fluorescence quenching studies. The fabricated Inverted hetero junction exhibited maximum power conversion efficiency of 0.22% with ICBA as the acceptor molecule. Chapter 8 narrates the third order order nonlinear optical properties of bare and noble metal modified TiO2 thin films. Thin films were fabricatedby spray pyrolysis technique. Sol-Gel derived Ti[OCH(CH3)2]4 in CH3CH2OH/CH3COOH was used as the precursor for TiO2. The precursors used for Au, Ag and Pd were the aqueous solutions of HAuCl4, AgNO3 and Pd(NO3)2 respectively. The prepared films were characterized by XRD, SEM and EDX. The nonlinear optical properties of the prepared materials were investigated by Z-Scan technique comprising of Nd-YAG laser (532 nm,7 ns and10 Hz). The non-linear coefficients were obtained by fitting the experimental Z-Scan plot with the theoretical plots. Nonlinear absorption is a phenomenon defined as a nonlinear change (increase or decrease) in absorption with increasing of intensity. This can be mainly divided into two types: saturable absorption (SA) and reverse saturable absorption (RSA). Depending on the pump intensity and on the absorption cross- section at the excitation wavelength, most molecules show non- linear absorption. With increasing intensity, if the excited states show saturation owing to their long lifetimes, the transmission will show SA characteristics. Here absorption decreases with increase of intensity. If, however, the excited state has strong absorption compared with that of the ground state, the transmission will show RSA characteristics. Here in our work most of the materials show SA behavior and some materials exhibited RSA behavior. Both these properties purely depend on the nature of the materials and alignment of energy states within them. Both these SA and RSA have got immense applications in electronic devices. The important results obtained from various studies are presented in chapter 9.

Development of selected electro-active polymer-ceramic nanocomposites as pyroelectric thermal/infrared detector materials

The present work emphasises on the synthesis and characterization of electro-active polymer-ceramic nanocomposites which can be used for pyroelectric thermal/infrared detection applications. Two sets of samples belong to polymer-microcrystalline composites have also been investigated in the work. The polymers used in the work have been commercially available ones, but the nanoceramics have been synthesized following simple chemical routes and aqueous organic gel routes. After characterizing the nanoceramics for their structure by powder XRD, they have been dispersed in liquid polymer and sonicated for uniform dispersion. The viscous mixture so formed was cast in the form of films for experimentation. Samples with volume fraction of the ceramic phase varied from 0 to 0.25 have been prepared. Solution growth was followed to prepare microcrystalline samples for the polymer-microcrystalline composites. The physical properties that determine the pyroelectric sensitivity of a material are dielectric constant, dielectric loss, pyroelectric coefficient, thermal conductivity and specific heat capacity. These parameters have been determined for all the samples and compositions reported in this work.The pyroelectric figures of merit for all the samples were determined. The pyroelectric figures of merit that determine the pyroelectric sensitivity of a material are current sensitivity, voltage responsivity and detectivity. All these have been determined for each set of samples and reported in the thesis. In order to assess the flexibility and mouldability of the composites we have measured the Shore hardness of each of the composites by indentation technique and compared with the pyroelectric figures of merit. Some important factors considered during the material fabrication stages were maximum flexibility and maximum figures of merit for pyroelectric thermal/IR detection applications. In order to achieve these goals, all the samples are synthesized as composites of polymers and nano/microcrystalline particles and are prepared in the form of freestanding films. The selected polymer matrices and particle inclusions possess good pyroelectric coefficients, low thermal and dielectric properties, so that good pyroelectric figures of merit could be achieved. The salient features of the work include the particle size of the selected ceramic materials. Since they are in nanometer size it was possible to achieve high flexibility and moldability with high figures of merit for even low volume fractions of inclusions of the prepared nanocrystalline composites. In the case of microcrystalline TGS and DTGS, their composites in PU matrix protect them from fragility and humidity susceptibility and made them for environmental friendly applications.

Investigations on TiO2 Based Nanocomposites as Potential Photonic Materials

This Study overviews the basics of TiO2with respect to its structure, properties and applications. A brief account of its structural, electronic and optical properties is provided. Various emerging technological applications utilising TiO2 is also discussed.Till now, exceptionally large number of fundamental studies and application-oriented research and developments has been carried out by many researchers worldwide in TiO2 with its low-dimensional nanomaterial form due to its various novel properties. These nanostructured materials have shown many favourable properties for potential applications, including pollutant photocatalytic decomposition, photovoltaic cells, sensors and so on. This thesis aims to make an in-depth investigation on different linear and nonlinear optical and structural characteristics of different phases of TiO2. Correspondingly, extensive challenges to synthesise different high quality TiO2 nanostructure derivatives such as nanotubes, nanospheres, nanoflowers etc. are continuing. Here, different nanostructures of anatase TiO2 were synthesised and analysed. Morphologically different nanostructures were found to have different impact on their physical and electronic properties such as varied surface area, dissimilar quantum confinement and hence diverged suitability for different applications. In view of the advantages of TiO2, it can act as an excellent matrix for nanoparticle composite films. These composite films may lead to several advantageous functional optical characteristics. Detailed investigations of these kinds of nanocomposites were also performed, only to find that these nanocomposites showed higher adeptness than their parent material. Fine tuning of these parameters helps researchers to achieve high proficiency in their respective applications. These innumerable opportunities aims to encompass the new progress in studies related to TiO2 for an efficient utilization in photo-catalytic or photo-voltaic applications under visible light, accentuate the future trends of TiO2-research in the environment as well as energy related fields serving promising applications benefitting the mankind. The last section of the thesis discusses the applicability of analysed nanomaterials for dye sensitised solar cells followed by future suggestions.

Organic field-effect transistors and phototransistors based on amorphous materials

A comparison between the charge transport properties in low molecular amorphous thin films of spiro-linked compound and their corresponding parent compound has been demonstrated. The field-effect transistor method is used for extracting physical parameters such as field-effect mobility of charge carriers, ON/OFF ratios, and stability. In addition, phototransistors have been fabricated and demonstrated for the first time by using organic materials. In this case, asymmetrically spiro-linked compounds are used as active materials. The active materials used in this study can be divided into three classes, namely Spiro-linked compounds (symmetrically spiro-linked compounds), the corresponding parent-compounds, and photosensitive spiro-linked compounds (asymmetrically spiro-linked com-pounds). Some of symmetrically spiro-linked compounds used in this study were 2,2',7,7'-Tetrakis-(di-phenylamino)-9,9'-spirobifluorene (Spiro-TAD),2,2',7,7'-Tetrakis-(N,N'-di-p-methylphenylamino)-9,9'-spirobifluorene (Spiro-TTB), 2,2',7,7'-Tetra-(m-tolyl-phenylamino)-9,9'-spirobifluorene (Spiro-TPD), and 2,2Ž,7,7Ž-Tetra-(N-phenyl-1-naphtylamine)-9,9Ž-spirobifluorene (Spiro alpha-NPB). Related parent compounds of the symmetrically spiro-linked compound used in this study were N,N,N',N'-Tetraphenylbenzidine (TAD), N,N,N',N'-Tetrakis(4-methylphenyl)benzidine (TTB), N,N'-Bis(3-methylphenyl)-(1,1'-biphenyl)-4,4'-diamine (TPD), and N,N'-Diphenyl-N,N'-bis(1-naphthyl)-1,1'-biphenyl-4,4'-diamine (alpha-NPB). The photosensitive asymmetrically spiro-linked compounds used in this study were 2,7-bis-(N,N'-diphenylamino)-2',7'-bis(biphenyl-4-yl)-9,9'-spirobifluorene (Spiro-DPSP), and 2,7-bis-(N,N'-diphenylamino)-2',7'-bis(spirobifluorene-2-yl)-9,9'-spirobifluorene (Spiro-DPSP^2). It was found that the field-effect mobilities of charge carriers in thin films of symmetrically spiro-linked compounds and their corresponding parent compounds are in the same order of magnitude (~10^-5 cm^2/Vs). However, the thin films of the parent compounds were easily crystallized after the samples have been exposed in ambient atmosphere and at room temperature for three days. In contrast, the thin films and the transistor characteristics of symmetrically spiro-linked compound did not change significantly after the samples have been stored in ambient atmosphere and at room temperature for several months. Furthermore, temperature dependence of the mobility was analyzed in two models, namely the Arrhenius model and the Gaussian Disorder model. The Arrhenius model tends to give a high value of the prefactor mobility. However, it is difficult to distinguish whether the temperature behaviors of the material under consideration follows the Arrhenius model or the Gaussian Disorder model due to the narrow accessible range of the temperatures. For the first time, phototransistors have been fabricated and demonstrated by using organic materials. In this case, asymmetrically spiro-linked compounds are used as active materials. Intramolecular charge transfer between a bis(diphenylamino)biphenyl unit and a sexiphenyl unit leads to an increase in charge carrier density, providing the amplification effect. The operational responsivity of better than 1 A/W can be obtained for ultraviolet light at 370 nm, making the device interesting for sensor applications. This result offers a new potential application of organic thin film phototransistors as low-light level and low-cost visible blind ultraviolet photodetectors.

Optical Characterization of Organic Gain Materials for UV-emitting Hybrid Complex Coupled VCSELs

In this thesis, optical gain measurement setup based on variable stripe length method is designed, implemented and improved. The setup is characterized using inorganic and organic samples. The optical gain of spiro-quaterphenyl is calculated and compared with measurements from the setup. Films with various thicknesses of spiro-quaterphenyl, methoxy-spiro-quaterphenyl and phenoxy-spiro-quaterphenyl are deposited by a vacuum vapor deposition technique forming asymmetric slab waveguides. The optical properties, laser emission threshold, optical gain and loss coefficient for these films are measured. Additionally, the photodegradation during pumping process is investigated.

Materials ferromagnètics tous

L'equip de Joan Josep Suñol investiga per millorar les prestacions dels aliatges obtinguts per síntesi mecànica

An??lisis bibliom??trico sobre evaluaci??n de programas y comunidades terap??uticas para la rehabilitaci??n de toxic??manos

Analizar el estado de la cuesti??n sobre trabajos que se han realizado para evaluar programas y comunidades terap??uticas orientadas a la rehabilitaci??n de toxic??manos. Consulta de 7 bases de datos que facilitaron el acceso a 14 revistas, en su mayor??a estadounidenses. En total, se consultan 166 registros referidos al objeto de estudio. Se parte de una fundamentaci??n te??rica y metodol??gica sobre estudios bibliom??tricos y de una b??squeda de referencias bibliogr??ficas sobre evaluaci??n de programas y comunidades terap??uticas para la rehabilitaci??n de toxic??manos en las bases de datos pertinentes. Seguidamente se hace un an??lisis de documentos en el cual se identifican diversas variables: a) Referentes a los datos propios del documento (autor, a??o, t??tulo...); b) Referentes a la estructura interna del documento (tipo de evaluaci??n, finalidad, dise??o, muestra...); c) Referentes a los resultados y/o conclusiones obtenidas (puntos fuertes y d??biles, recomendaciones...). Adem??s de ello, se tienen en consideraci??n indicadores de productividad e indicadores de colaboraci??n. Se ha utilizado una parrilla de an??lisis construida 'ad-hoc' y tambi??n una serie de indicadores bibliom??tricos. Esta parrilla est?? estructurada en tres unidades de an??lisis compuestas por un n??mero determinado de variables. La codificaci??n de la informaci??n de tipo cuantitativo se hace a trav??s del programa inform??tico SPSS, el cual permite obtener estad??sticos de cada variable. El an??lisis cualitativo se realiza mediante el procedimeitno de an??lisis de contenido. Destacan, entre otras: a) La mayor??a de los trabajos analizados est??n realizados en colaboraci??n; b) La producci??n de trabajos desde 1984 hasta 1997 permanece uniforme, en 1998 se observa un punto de inflexi??n que corresponde con un aumento de los trabajos publicados y que dura hasta 2004; c) La mayor??a de los trabajos son realizados en USA debido a la mayor tradici??n evaluadora que existe en ese pa??s y el mayor n??mero de recursos existentes para financiar y publicar las evaluaciones realizadas; d) El tipo de documento m??s utilizado es el art??culo de revista; e) La mayor parte de los trabajos est??n realizados en contexto p??blico y con financiaci??n de la administraci??n; f) Todos los trabajos revisados contemplan una revisi??n bibliogr??fica; g) La mayor parte de los trabajos se refieren a la teor??a o modelo de evaluaci??n del que parten de un modo impl??cito; h) El tipo de evaluaci??n m??s empleada es la 'sumativa, expost, externa'; i) La finalidad de la mayor??a de los trabajos es 'verificar', tanto si se cumplen los objetivos planteados por el programa evaluado, como si se cumplen las hip??tesis de evaluaci??n planteadas que hacen referencia a alg??n resultado deseado; j) La metodolog??a empleada en los dise??os es en su mayor parte cuasiexperimental; k) El sistema de control m??s utilizado es el control reflexivo, es decir, menciones sobre un mismo grupo; l) Las t??cnicas e instrumentos de recogida de informaci??n m??s utilizados son los cuantitativos; m) El tama??o de la muestra elegido suele ser grande siendo el tipo de muestreo m??s com??n el 'no probabil??stico'; n) Las evaluaciones se dirigen a los usuarios de los programas y comunidades terap??uticas.

Projecte Frankenstein: materials de metodologia docent

El projecte correspon a la assignatures de 1r curs de Fonaments Físics a l’Enginyeria Mecànica. Els alumnes han de dedicar un total de 16 h distribuïdes al llarg de dues setmanes amb un número aproximat de 8 h/setmana. Les classes expositives del professor corresponen a 2 h/setmana (1 h explicació conceptes i 1 h d’aplicació de conceptes en problemes). Els alumnes han d’assolir els conceptes simultàniament al desenvolupament del projecte. Els grups formats cooperen en el projecte, en el desenvolupament i comprensió dels exercicis i en la resolució de dubtes respecte la matèria relacionada amb el projecte

Projecte Frankenstein: materials didàctics

El projecte correspon a la assignatures de 1r curs de Fonaments Físics a l’Enginyeria Mecànica. El projecte correspon a un treball de síntesi dels conceptes i les seves aplicacions dels següents temes: 1.Anàlisi dimensional. 2.Camp elèctric: 2.1. Intensitat de camp elèctric. 2.2. Potencial elèctric. 2.3. Característiques elèctriques dels aïllants i conductors. 2.4. Conductors en equilibri electrostàtic. 3.Electrocinètica: 3.1. Resistivitat i resistència. 3.2. Llei d’Ohm

Apunts de fonaments de ciències dels materials [versió html]

Aquest text pretén ser una guia útil pels estudiants de Fonaments de Ciència de Materials dels diversos estudis d’Enginyeria. El document s’estructura en 20 temes organitzats en cinc blocs. Els dos blocs primers són una introducció als conceptes bàsics de la matèria i els tres restants els dediquem a les tres principals famílies de materials: metàl·lics, ceràmics i polímers. Per a cada tema s’estableixen les competències especifiques que s’han d’assolir, es desenvolupen de forma esquemàtica els continguts i s’adjunten exemples resolts de problemes. Al final de cada bloc s’inclou també una col·lecció de qüestions i problemes. Al final del llibre, trobareu una biografia recomanada per tal de desenvolupar exhaustivament la matèria

Apunts de fonaments de ciències dels materials [versió comprimida]

Aquest text pretén ser una guia útil pels estudiants de Fonaments de Ciència de Materials dels diversos estudis d’Enginyeria. El document s’estructura en 20 temes organitzats en cinc blocs. Els dos blocs primers són una introducció als conceptes bàsics de la matèria i els tres restants els dediquem a les tres principals famílies de materials: metàl·lics, ceràmics i polímers. Per a cada tema s’estableixen les competències especifiques que s’han d’assolir, es desenvolupen de forma esquemàtica els continguts i s’adjunten exemples resolts de problemes. Al final de cada bloc s’inclou també una col·lecció de qüestions i problemes. Al final del llibre, trobareu una biografia recomanada per tal de desenvolupar exhaustivament la matèria

Apunts de fonaments de ciències dels materials [2a. ed.]

Aquest text pretén ser una guia útil pels estudiants de Fonaments de Ciència de Materials dels diversos estudis d’Enginyeria. El document s’estructura en 20 temes organitzats en cinc blocs. Els dos blocs primers són una introducció als conceptes bàsics de la matèria i els tres restants els dediquem a les tres principals famílies de materials:metàl·lics, ceràmics i polímers. Per a cada tema s’estableixen les competències especifiques que s’han d’assolir, es desenvolupen de forma esquemàtica els continguts i s’adjunten exemples resolts de problemes. Al final de cada bloc s’inclou també una col·lecció de qüestions i problemes. Al final del llibre, trobareu una bibliografia recomanada per tal de desenvolupar exhaustivament la matèria

Modelització de la contribució del formigó traccionat entre fissures en estructures reforçades amb armadures de materials compostos amb matriu polimèrica (FRP).

El present treball s’emmarca dins el camp de les estructures de formigó, i més concretament, a les que es troben reforçades amb armadures de materials compostos amb matriu polimèrica, és a dir FRP “Fiber Reinforced Polymer”

Caracterització dels materials de l’ Església de Sant Feliu de Girona

La finalitat del present projecte es l’estudi dels materials de construcció del campanar de Sant Feliu de Girona, es a dir com son la pedra de Girona i el morter de calç del que esta fet, analitzant el seu comportament i l’evolució soferta en les seves diverses parts des de que va ser construït. En aquest projecte s’intenta analitzar la construcció del campanar, els materials que el formen, d’on provenen i les solucions que es poden adoptar a l’hora de restaurar un monument com aquest

Autoclau pel processament de materials compòsits

Disseny d’un autoclau pel processat de materials compòsits, seguint les especificacions de disseny següents: Diàmetre interior útil: 1500mm, Longitud interior útil 3500mm, Pressió de treball: 12 bars, Temperatura de treball: 250º. A més a més, el sistema ha de disposar en el seu interior de connexions per fer el buit i s’ha d’assegurar l’homogeneïtat tèrmica recirculant l’aire durant el procés